Get complete information related to latest Explosives Detector Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Explosives Detector Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Explosives Detector Tenders.
Tender For procurement of sensors and relay for super simultan evo machine d d - sensor with connector and 3m meter cable , final limit pile up sensor with and connector and cable , sheet thickness sensor and auxiliary pile sensor with connector and cable , light barrier with connector and cable , contrast sensor with connector and cable , double sheet detector sensor , inductive sensor with connector and cable , control infeed side lay control , monitoring sheet run sensor , pressure on and off sensor , proximity sensor , piezoelectric sensor , infrared sensor , infeed make ready sensor , metal sensor , paper sensor , final limit pile up sensor , light barrier sensor , optical sensor , infrared sensor with 5 pin connector and cable , limit switch , delivery lamp tube lights , guard switch ) /bid number : gem/2025/b/6620829 * /dated: 06-09-2025 & & / bid document 1 / 32
Tender For tender for the work of providing/supplying of spare materials to 220kv/66kv/11kv/6.6kv substations at harohalli and tataguni 220kv receiving stations coming under ee k-o&m-2 division harohalli (emergency and essential work) - phase plates (set of 6 per tower), number plates/circuit plates, danger plates/caution plates (1 no. per tower), anticlimbing device gi barbed wire (12 mtr/kg), telescopic ladder aluminium 6 m height (approved make), hydraulic crimping tool upto 1000 sq mm (approved make), line live tester, rubber hand gloves 15 kv tested, insulation tester digital type (megger) 2.5 kv - 5 kv (approved make), sf6 gas leak detector (approved make), multimeter electronic type (approved make), rubber apron, rubber shoes knee height, grounding sticks extendable upto 18 ft - 3 nos. of each 6 ft sticks of 3 phase r, y, b (3 nos. of 1 set), manilla rope 1inch (one bundle of 100 m), safety belts with accessories (approved make), safety helmet with rachet, hydraulic bolt cutter/wire cutter upto drake acsr conductor with bits for cuttings (approved make), lt line spacer for 4 wire, insulated gos operating handle/rod for redesigned & modified gos, tubular telescopic tree pruner comprising of 2 sticks weight less than 3 kgs blade length 16inch, thickness 1.5 mm length of the blade and rod 6.5 mtr circumference of the rod 120mm rod material frp or aluminum. insulation shall be provided if aluminum material is used for rod., ldpe safety cone with (bwssb) logo, c-type wedge connectors drake to drake acsr conductor, ct clamp for single drake, drake 4 hole paddle acsr conductor 895a, p.g. clamps for drake, pad clamps for drake, sf6 gas filling kit/adapter, bamboo ladder (hight of 10mtr), bamboo ladder (hight of 06mtr), arc flash suit, 40kal, 3layer (approved make), voltage transformer 220kv rating, single phase, oil filled, outdoor type vt with terminal connector suitable for al. tube/conductor with marshalling box etc., complete as per technical specification. (approved make) voltage ratio 220 kv/3 / 110 v/3 - 110 v/3 accuracy class 0.2, insulation level 460/1050kv, creepage greater than 6125, current transformers oil filled current transformer 0.2s class with terminal connector suitable for al. tube/conductor with marshalling box etc., complete as per technical specifications, (approved make) 220 kv class 1200-800-400-300/1-1-1 a plus 2 cores of 1200/1 a, voltage transformer 66kv rating, single phase, oil filled, outdoor type vt with terminal connector suitable for al. tube/conductor with marshalling box etc., complete as per technical specification. (approved make) voltage ratio 66 kv/3 / 110 v/3 - 110 v/3 - 110 v/3, current transformers oil filled current transformer 0.2s class with terminal connector suitable for al. tube/conductor with marshalling box etc., complete as per technical specifications, (approved make) 66 kv class ct ratio 400-200 / 1-1-1 a (for line 1and 2) (ii and iii stage supply), lightning (surge) arrestor 198 kv metal oxide with surge counter arrestor class station medium duty (sm) - discharge class 3 - for overhead line, transformer ug cable, lightning (surge) arrestor 60 kv metal oxide with surge counter arrestor class discharge class 3 (station medium duty (sm) - for transformer & ug cable, solid core bus post insulator 220 kv, solid core bus post insulator 66 kv, a 220 kv, 120 kn tension type porcelain long rod insulators with sectional length - 2175/2320 mm, a 66 kv, 120 kn tension type porcelain long rod insulators with sectional length - 725 mm
Tender For kerala water authority-funds-water quality testing- supply of lab equipments-at konni thazham wtp - procurement of equipments, od121756/2025-2026:supply and installation of microcontroller based ph meter with 3 point calibrationi) ph:-range : 0.00 to 14.00 ph or better resolution: 0.01or better accuracy:+0.02 or -0.02 ph or better calibration points: 3 points minimumbuffer options : standard buffersii) mv:-range :0 to +1999mv resolution: 1 mv or betteraccuracy :+1or- 1mv or betteriii) temperature range : 0.0 to 99 c or better resolution:0.1 c or betteraccuracy :+0.5 c or -0.5 c or betteriv) electrode specification single junction ,body-plastic /unbreakable, gel filled electrode atc probe and electrode stand should also be provided.v) meter features 1) lcd/ led display 2) dual display of ph or mv with temperature 3) with auto buffer recognition 4) off set/slope should be displayed 5) power 230v +10% or -10% 6) buffer solutions 7.0, 4.0. 9.2 ph (100ml minimum) should be provided. 7) should provide all accessories for smooth functioning of the equipment. 8) hard copy of user manual with instrument specification 9) warranty:1 year for the meter and 6 months for electrodecalibration at the time of installation to be done by the supplier., od121755/2025-2026:supply and installation of best quality isi marked digital jar test apparatus with 1) no. of stirrers -6 minimum 2) rpm- 25 to 200 rpm or better 3) capacity of single stirrer unit-1 l 4) control -digital control (digital timer & r.p.m counter) 5) stirrer paddle material (with appropriate corrosion protective coating) - stainless steel 6) power single phase (220 -240 volts) 7) illumination -fluorescent tube ; illumination should not contribute heat to the system. 8) warranty period -2 years installation to be done by the supplier. , od121754/2025-2026:supply and installation of micro controller based digital nephelo turbidity meter specifications:1. range : 0 to 1000ntu 2. range selection manual /automatic 3. resolution . 0.1 ntu or better 4. accuracy +3% or -3% or better 5. calibration : 4 points minimum (manual/auto selection) 6.light source : led/tungsten halogen lamp 7. detector : photodiode 8. display :lcd/led 9. power :230v (+10% or -+10%),50 tom 60-hz 10.accessories matching test tubes(4 nos minimum ) and light shield ,1000ntu solution 500ml minimum 11. instrument manual with specification details(hard copy) 12. warranty 2 years for the entire instrument calibration at the time of installation to be done by the supplier.
Tender For kerala water authority-funds-water quality testing-supply of lab equipment at various wtps under ws section , chiranickal-chiranickal and malankavu wtps - procurement of equipments, od121825/2025-2026: supply and installation of microcontroller based ph meter with 3 point calibrationi) ph:-range : 0.00 to 14.00 ph or betterresolution: 0.01or betteraccuracy:+0.02 or -0.02 ph or bettercalibration points: 3 points minimumbuffer options : standard buffersii) mv:-range :0 to +1999mvresolution: 1 mv or betteraccuracy :+1or- 1mv or betteriii) temperaturerange : 0.0 to 99 c or betterresolution:0.1 c or betteraccuracy :+0.5 c or -0.5 c or betteriv) electrode specificationsingle junction ,body-plastic /unbreakable, gel filled electrodeatc probe and electrode stand should also be provided.v) meter features1) lcd/ led display2) dual display of ph or mv with temperature3) with auto buffer recognition4) off set/slope should be displayed5) power 230v +10% or -10%6) buffer solutions 7.0, 4.0. 9.2 ph (100ml minimum) should be provided.7) should provide all accessories for smooth functioning of the equipment.8) hard copy of user manual with instrument specification9) warranty:1 year for the meter and 6 months for electrodecalibration at the time of installation to be done by the supplier, od121826/2025-2026: supply and installation of micro controller based digital nephelo turbidity meterspecifications:1. range : 0 to 1000ntu2. range selection manual /automatic3. resolution . 0.1 ntu or better4. accuracy +3% or -3% or better5. calibration : 4 points minimum (manual/auto selection)6.light source : led/tungsten halogen lamp7. detector : photodiode8. display :lcd/led9. power :230v (+10% or -+10%),50 tom 60-hz10.accessories matching test tubes(4 nos minimum ) and light shield ,1000ntusolution 500ml minimum11. instrument manual with specification details(hard copy)12. warranty 2 years for the entire instrumentcalibration at the time of installation to be done by the supplier, od121827/2025-2026: supply and installation of best quality isi marked digital jar test apparatus with1) no. of stirrers -6 minimum2) rpm- 25 to 200 rpm or better3) capacity of single stirrer unit-1 l4) control -digital control (digital timer & r.p.m counter)5) stirrer paddle material (with appropriate corrosion protective coating) - stainlesssteel6) power single phase (220 -240 volts)7) illumination -fluorescent tube ; illumination should not contribute heat to thesystem.8) warranty period -2 yearsinstallation to be done by the supplier
Tender For kerala water authority-funds-water quality testing- supply of lab equipments at pampooripara wtp -under ph section pathanamthitta - procurement of equipments, od122174/2025-2026: supply and installation of microcontroller based ph meter with 3 point calibrationi) ph:-range : 0.00 to 14.00 ph or betterresolution: 0.01or betteraccuracy:+0.02 or -0.02 ph or bettercalibration points: 3 points minimumbuffer options : standard buffersii) mv:-range :0 to +1999mvresolution: 1 mv or betteraccuracy :+1or- 1mv or betteriii) temperaturerange : 0.0 to 99 c or betterresolution:0.1 c or betteraccuracy :+0.5 c or -0.5 c or betteriv) electrode specificationsingle junction ,body-plastic /unbreakable, gel filled electrodeatc probe and electrode stand should also be provided.v) meter features1) lcd/ led display2) dual display of ph or mv with temperature3) with auto buffer recognition4) off set/slope should be displayed5) power 230v +10% or -10%6) buffer solutions 7.0, 4.0. 9.2 ph (100ml minimum) should be provided.7) should provide all accessories for smooth functioning of the equipment.8) hard copy of user manual with instrument specification9) warranty:1 year for the meter and 6 months for electrodecalibration at the time of installation to be done by the supplier., od122173/2025-2026: supply and installation of micro controller based digital nephelo turbidity meterspecifications:1. range : 0 to 1000ntu2. range selection manual /automatic3. resolution . 0.1 ntu or better4. accuracy +3% or -3% or better5. calibration : 4 points minimum (manual/auto selection)6.light source : led/tungsten halogen lamp7. detector : photodiode8. display :lcd/led9. power :230v (+10% or -+10%),50 tom 60-hz10.accessories matching test tubes(4 nos minimum ) and light shield ,1000ntusolution 500ml minimum11. instrument manual with specification details(hard copy)12. warranty 2 years for the entire instrumentcalibration at the time of installation to be done by the supplier., od122175/2025-2026:supply and installation of best quality isi marked digital jar test apparatus with1) no. of stirrers -6 minimum2) rpm- 25 to 200 rpm or better 3) capacity of single stirrer unit-1 l4) control -digital control (digital timer & r.p.m counter)5) stirrer paddle material (with appropriate corrosion protective coating) - stainlesssteel6) power single phase (220 -240 volts)7) illumination -fluorescent tube ; illumination should not contribute heat to thesystem.8) warranty period -2 yearsinstallation to be done by the supplier.
Tender For corrigendum : kerala water authority funds deposit supply and installationof lab equipments for maintaining quality standards in various schemes under p h division palakkad - supply of lab equipments to various wss and rwss under p h division palakkad, od114374/2025-2026:supply and installation of jar test apparatus with the specifications are (1). number of stirres - 6 minimum, (2). rpm- 25 to 200 rpm or better, (3). capacity of single stirrer unit- 1 l, (4). control -digital control (digital timer & r.p.m counter), (5). stirrer paddle material (with appropriate corrosion protective coating) - stainless steel, (6). power single phase (220 - 240 volts), (7). illumination -fluorescent tube ; llumination should not contribute heat to the system, (8). warranty period -2 years. etc; complete., od114368/2025-2026:supply , installation and calibration of digital nephelo turbidity meter with the specifications are ; (1). range : 0 to i000ntu , (2). range selection : manual /automatic , (3). resolution : 0.1 ntu or better , (4). accuracy : +or- 3% or better, (5). calibration : 4 points minimum (manual/auto selection) , (6). light source : led/tungsten halogen lamp , (7). detector : photodiode , (8). display : lcd/led , (9). power : 230v +or- 10 % , 50 to 60hz, (10). accessories: matching test tubes(4 nos minimum ) and light shield, l000ntu solution 500 ml minimum, (11). instrument manual with specification details(hard copy) , (12). warranty : 2 years for the entire instrument etc ; complete., od114367/2025-2026:supply , installation and calibration of bench top ph meter with the specifications are (i). ph - range : 0.00 to 14.00 ph or better, resolution : 0.01or better, accuracy : +or- 0.02 ph or better, calibration points : 3 points minirnum, buffer options : : standard buffers (ii). mv - range : 0 to +or- l999mv, resolution : i mv or better, accuracy : + or - 1 mv or better (iii). temperature - 0.0 to 99 degree c or better, resolution : 0.1 degree c or better, accuracy : + 0.5 degree c or better (iv). electrode qpecification: single junction ,body-plastic /unbreakable, gel filled electrode atc probe and electrode stand should also be provided. (v). meter features - 1) lcd i led display, 2) dual display of ph or mv with temperature , 3) with auto buffer recognition, 4) off set/slope should be displayed , 5) power 230v +or - 10%, 6) buffer solutions 7 .0, 4.0, 9.2 ph (100m1 minimum) should be provided, 7) should provide all accessories for smooth functioning of the equipment, 8) hard copy of user manual with instrument specification, 9) warranty: 1 year for entire insruments etc; complete., od114377/2025-2026:supply of laboratory equipments including electronic weighing balances,etc. with 2 year warrenty including conveyance charges, od114750/2025-2026:supply and installation of digital conductivity meter 308 with the specifications are (i). conductivity - 1). range : 0.1 us to 100 ms (6 decadic ranges) , 2). accuracy : +or - 1% of fs + or - digit. 3). resolution : 0.001 micro.s (ii). tds - range : 0.1ppm to 100 ppt (6 decadic ranges ), accuracy : + or - 1% of fs (iii). temperature - temperature : 0 degree c to 100 degree c( auto / manual ), resolution : 0.1 degree c. , accuracy : + or - 0.2 degree c. etc; complete with 2 year warrenty, od114370/2025-2026:supply of buffer solution for ph 4 and ph 7(500ml bottle)
Tender For tender for supply of coalescer filter , rear bearing for pump , front bearing for pump , retaying ring for pump , drive pin for pump , coupling pads , bearing for motor , gland packing , gland packing for pump , auto airvent valve , manual airvent valve , disc clamping cap , clamping bolt for filter cap , clamping bolt for disc cap , drain valve , guide cylinder , pressure relife valve , test cock , isolating valve , inlet valve , electromagnetic relay , cable glands , connecting socket , connecting plug with cable , obs pcb for level sensing probe level , selector switches , obs resilient stator pump , obs helical rotor pump , tie rod for pump , gland packing for pump , instrument mode switch , aux , transformer , push button , pneautic cylinder , set of o rings , set of o rings , stuffing box packing for pumps , pressure gauge 1 to 5 bar , extension pcb h , pcb g , complete measuring cell bi card , tube glass optical for optical cell , connection sockets for optical cell(for tr defl.& tr trans. , connecting socket for optical cell , connecting cable for sample cell , i/r detector for optical cell , hooter , potentiometer min , pcb c