Latest extension reel Tenders | Government extension reel Tenders

Central Government/Public Sector

CTN :45708379

30 Jul, 2026 NA

Multi City - Multi State

Tender For supply, installation, testing and commissioning of vhf 25 watt digital radio sets as per rdso specification no. rdso/spn/tc/107/2018 rev. 2.1 (technical parameters as per para 5 d), withplain mic, power supply unit cum smps battery charger (13.5v/15a), 12v/100ah vrla battery with i-lead connectors, rg - 217 low loss cable with end connectors (30 metres) high gain base antenna with clamps, pipe pole mast with clamping, stay wire arrangements base station units and all standard accessories as per rdso specification no. rdso/spn/tc/107/2018 rev. 2.1 . [ warranty period: 05 years from the date of supply for the vhf set and minimum 1 year for the battery, battery charger and antenna ] [ warranty period: 60 months after the date of delivery ] ]

CTN :45511136

02 Jul, 2026 3.60 Crore

Ujjain - Madhya Pradesh

Tender For corrigendum : supply of accessories for cable- (i)piercing connector type-i 16-50, (ii)piercing connector type-ii 16-50, (i)piercing connector type-i for single phase/ three phase (main 70-150 sqmm. tape of 50-95sqmm), (ii)piercing connector type-ii (main 70-150 sqmm tape-of 50-95 sqmm), suspension clamp with attachment, tension clamp with attachment, cable straight-through joint kit suitable for 70 sqmm, cable end termination kit suitable for 70 sqmm, i)t clamp for bus bar for dog to dog conductor, ii)terminal clamp for busbar for panther conductor, bi-metallic clamps for vcb, bi-metallic clamps for transformer, 30v 100ah lead acid battery, battery charger suitable for 30 v 100ah battery, 30v dc lithium-ion battery set, lt robust fuse unit/switch fuse unit, gi pipe 150mm b grade, gi pipe 150mm a grade, heat shrinkable cable jointing kit with lugs for 33/11 kv 3 core (33/11kv, 3*300 sqmm), (i)ht bi-metallic clamps for dtr, (ii)lt bi-metallic clamps for dtr, (i) dc distribution board with mcb, (ii)ac distribution board with mcb, led lamp complete fitting, (i) aluminium lugs 70 sqmm, (ii) aluminium lugs 150 sqmm, (iii) aluminium lugs 300 sqmm, pf unit (kitkat) 200 amp., pf unit (kitkat) 300 amp., hrc fuse base 200/250 amp., hrc fuse base 300 amp., hrc fuse base 400 amp., hrc fuse link 200/250 amp., hrc fuse link 300 amp., hrc fuse link 400 amp, hand operated chain pulley block 3 ton, silica gel breather 500 gm., (i) bi-metallic clamp suitable for 12mm dia lt stud, (ii) bi-metallic clamp suitable for 20mm dia lt stud, (iii) bi-metallic clamp suitable for ht stud, i) i-bolt 20 mm., ii) i-bolt 16 mm., t.c. fuse wire 14,16,18 & 20 swg, ethical & generic medicines and surgical items for dispensary mppkvvcl, ujjain

Central Government / Public Sector

CTN :44068219

01 Jul, 2026 NA

Bongaigaon - Assam

Tender For corrigendum : supply of vhf sets with accessories for cisf d d -portable digital radio set, , vhf repeater with high gain antenna , vhf base station radio sets , 5by8 3 db gain omindirectional antenna , rf coaxial cable with connectors 30mtr , 12vdc power supply unit 10amps batt , six slot charger for dmr handheld radios , network switch 24 port , liasoning charges , itc and programming of vhf system

Central Government/Public Sector

CTN :45329483

29 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For corrigendum : provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate nu

Central Government/Public Sector

CTN :45616722

20 Jul, 2026 NA

Hubli - Karnataka

Tender For supply and testing of digital vhf 25 watt radio with plain mic standard accessories, power supply unit cum battery charger (13.5v/15a) 12v/100ah vrla battery with i-lead connectors lmr 400 co-axial cable with end connectors(30 meter) high gain base antenna with clamps 1.25 pipe pole mast with clamping and stay wire arrangements base station units and built in aes 256 bit encrption (open standred for interoperability) as per rdso spec no. rdso/spn/tc/107/2018 rev. 0.0 amd 1 or latest simlar to motrolaxir m8668i aes 256 eicryption. note - 1. type of battery should be as per requirements of para 3.0 of rdso specification. note-2. the oems overall warranty period should be for 5 years from the date of supply forthe radio set and minimum 1 year for the battery, battery charger and antenna. note-3. the bidders shall submit a model and make of the 25 wats vhf set along with successful poc trail certificate issued by rdsoand the same poc certificate, mtcte certified and wpc certification shall be uploaded along with the bid. inspection by rites. make/brand- rdso poc approved make/mode, accepted make/brand: motorola, kenwood or better. [ warranty period: 30 months after the date of delivery ] ]

CTN :45618164

29 Jun, 2026 NA

Paschim Medinipur - West Bengal

Tender For tender for calibration of fast charger multi outlet btt3 6902 000 000 , calibration of charger li po 23 000765 , calibration of amdi 544 0207 405 , calibration of base station amdi 400.5 to 416.5 550 4100 a , calibration of avionics unit btt3 8702 032 000 , calibration of amdi unit with gps receiver for uav target 544 0207 032 , calibration of hot nose thermal enhancement btt3 6297 000 000 , calibration of transmitter kit 5 watt tbd , calibration of tx cont aerial synth t1 to t6 btt3 6493 802 032 , calibration of avionics jet80plus indian af btt3 8702 032 280 , calibration of base station amdi aspl gcs 550 4100a

CTN :45370512

26 Jun, 2026 NA

Pune - Maharashtra

Tender For corrigendum : supply of 012193120403 adu mounting kit , z18 r90 kit-012 19312 0407 antenna mounting kit , z6 r90 kit- 012193120402 mdu mounting kit , z6 r90 pz185- 2s.000tu loading control unit pz 185-2s , z6 r90 gost-1491-80-04 screw m4-6gx12.58-016 , z6 r90 adsh-485-000tu wire bundle no 53 , z6 r90 5310720232958 washer, spring tension , z6 r90 5995- 020624 wiring harness - a l-3500 mm , z6 r90 5950- 007086 electromagnet emt 10 , z6 r90 5310720168491 washer, keyway , z6 r90 172-26-019 gear , lv3 r90 5310720221330 washer 12t , lv3 r90 sb 3336-00-11 mounting of turbo charger , n1 r90 5315720482363 pin, hollow drg no 2a46m-01-7 , z6 r90 9s-831-470 wing nut fly nut , z6 r90 9s-831-018 cover , n1 r90 n1 5360-041517 n1 2 spring helical compression , n1 r90 5340720326373 rib 2a46m-106-30 , z6 r90 bl-9-363- 593-03 ring , z6 r90 5340720241425 clamp, loop , z6 r90 175-74-003-sb mounting of elect com of reduction gear , z6 r90 f5-000tu filter f 5 , z6 r90 edm14-000tu electric motor edm-14 , z6 r90 5340720241423 clamp, loop , n1 r90 5999-049606 upper contact breech mech , z6 r90 bs6-644-160 cable no 6 st , z6 r90 bs2-958-032 actuating cylinder , n1 r90 1015-012713 2a46m-1 jacket section , z6 r90 rsg-10m-016 terminal bolt fastener , n1 r90 gost-5918-73 arhoh nut m6-7h.5.019 , n1 r90 cotter pin 1.6x16.06 cotter pin 1.6x16.06 , n1 r90 1005- 560606 sleeve , n1 r90 1005-560626 extractor cam , n1 r90 1005-560636 band drg no 2a46m-106-8 guard assy , n1 r90 1005-560637 band 2a46m-106-10 , n1 r90 1010-013305 or 1010- catch , n1 r90 1015-003447 2a20-02 stop 2a20-02-76 , n1 r90 1015-012688 stop, breech block , n1 r90 6635720397677 weight 2a46m- 10-61 , n1 r90 1015-012701 handle 2a46m-02-87 , n1 r90 1015-012702 lever , n1 r90 1010-013306 or 5340- catch , n1 r90 1090-000200 rack , n1 r90 1095720301322 flange, gun drg no 2a46m-01-40 barrel , n1 r90 1015-012734 sleeve , n1 r90 5315- 050431 2a46m-0 lock pin pin straight head , n1 r90 5305-101408 lock screw , n1 r90 1015-012761 recoil brake recoil brake upper lower , n1 r90 3040-023114 crank shaft , n1 r90 5315-050138 2a46m-0 key, machine , n1 r90 5306-060685 bolt 172-18-083sb , n1 r90 5306-059518 2a46m-0 head , n1 r90 5305-095027 stop 2a46m- 02- 94 , n1 r90 5305-095025 screw , n1 r90 2a26-sb 10-40 sb yoke arc assy , n1 r90 3020- 015560 or 3040- link , z1 r90 misc-172-71-002-18sb supply cable , n1 r90 gost 9650-80 3 pin 6.20 f9x55.38xc.2.35.5.45.5 , n1 r90 gost 792-67 arhoh 4 wire ko-1,4 l 2600 mm , n1 r90 bolt m12-8gx35-88-38 bolt m12-8gx35-88-38xc-016 , n1 r90 gost 7796-70 r0h 45 bolt 3m8-8gx20.66.06 , n1 r90 188-27-006sbsb mounting of hatch door drive , n1 r90 2540-009427 base , n1 r90 3010-004162 reduction gear unit , n1 r90 1005-560735 striker , n1 r90 4820-057516 2a46m-0 plug , n1 r90 5365-182155 outer ring 2a46m-02-56 , n1 r90 5360-041518 2a46m02 spring helical compression , n1 r90 3020-001979 link tip-12-7-1820-1 gost 13568- 97 ce , n1 r90 5310-254078 gost 13 washer 14-01-10-06 spta , n1 r90 5365-182652 inner packing ring ring retaining , n1 r90 gost 14896-84 sealing ring 3.60x40.6 , n1 r90 5360-041474 nut , n1 r90 5360- 041473 spring helical expression a51230-70 , n1 r90 5360-041364 a51230- spring, helical compression , n1 //bid details 2 / 137 r90 5342-000044 rod , n1 r90 5340-180111 left flap , n1 r90 5340-179980 2a46mcb crank with roller breech mechanism , n1 r90 5340-179299 172-18- bracket , n1 r90 5340-178649 170.20. clamp, retaining , n1 r90 gost 6402-70 oh 11 washer 10 65g 029 , n1 r90 gost 17475-80 roh 3 screw bm6-6gx10.66.c.06 , n1 r90 5305-100561 screw b screw bm14-8gx30-66-c06 guard assy , n1 r90 gost 1491-80 or gost screw b.m6-6gx16.66.c.019 , v5 rus-188.94.017 sb-1 cradle assy , c2 r90 188-94-018cb-1cb cradle assy , n1 r90 gost-7795-70 m8x1-6 bolt m8x1-6gx35-46-016 , z7 rus- 187.21.031sb lever assembly , c2 r90 rus- 188.94.029sb-1sb bracket assy , n1 r90 rus t90 gost 792-67 wire ko-2 , c2 r90 188-94-020cb cb rod assy , c2 r90 188-94-030 cb-1cb belt collector bag assy , c2 r90 188-94

CTN :45176246

12 Jun, 2026 NA

Hyderabad - Telangana

Tender For bid to ras supply of teensy 4.1 micb3 c40 , mems microphones sph0655lm4h- 1 , raspberry pi 5 8 gb ram , lora sx 1276 and 1278 module , nuts, bolts and l angle different varieties , connecting wires and cables varieties , gps modules with pps output , power bank 10000ma 5v dc , enclosures for teensy, lora, microphone assemblies , micro sd cards 32 gb, class 10 , regulated power supply 12v dc to dc , tripods for sensor nodes , cable and connectors , nema 17 59 n-cm stepper motors bipolar , tmc2208 stepper motor drivers , mini protoboard with screw terminals , 100 uf capacitor 35v , 22 awg wire , 5v regulator , 8.4 inch 4 wire resistive touch panel , 30 v bench power supply , 1 inch steel bearing ball , 22 mm long m3 tie rod , m3 x 6 mm threaded inserts , m3 x 5 mm standoffs , m3 x 5 mm screws , m3 x 8 mm screws , m3 x 10 mm screws , m3 x 35 mm screws , m3 nylon locknuts , m4 x 20 mm screws , m4 x 25 mm screws , m4 nylon locknuts , pla filament , exacto knife , hot glue gun , primary dual payload release actuator , retrofitting carbon fiber cf structural tube , aerodynamic dummy bomblet , electronic trigger interface and wiring harnes , mounting bracket and fastener kit , primary dropping mechanism unit , retrofitting assembly straps , aerodynamic bomblet , 550 mah li hv battery pack , dual channel li hv charger , primary mmhg payload release actuator , retrofitting base plate assembly , dummy mmhg practice bomblet , electronic trigger interface , mounting hardware and vibration dampeners ) /bid number : gem/2026/b/7476437 * /dated: 13-05-2026 & & / bid document 1 / 39

Central Government/Public Sector

CTN :45488082

16 Jun, 2026 NA

Multi City - Jharkhand

Tender For auction sale of others - disposal of scrap released materials such as: (1) location box full (r), qty=198 nos. (2) location box half (r), qty=81 nos. (3) quarter jb (r), qty=17 nos. (4) ctr/relay rack (r), qty=46 nos. (5) point machine without motor (r), qty=09 nos. (6) chock (r), qty=94 nos. (7) track charger (r), qty=66 nos. (8) ips charger (r), qty=01 no. (9) ips battery (r), qty=32 nos. (10) track battery (r), qty=16 nos. (11) hand liver (r), qty=02 nos. (12) ct box (r), qty=20 nos. (13) signal post (r), qty=12 nos. (14) signal ladder (r), qty=11 nos. (15) signal base (r), qty=12 nos. (16) signal pole (r), qty=13 nos. (17) transfermer 230/110 (r), qty=13 nos. (18) ips (r), qty=09 nos. (19) data logger (r), qty=02 nos. (20) fire alarm pannel (r), qty=01 no. (21) ufsbi (r), qty=06 nos. (22) penal (r), qty=03 nos. (23) filter unit (r), qty=02 nos. (24) 42 u rake (r), qty=01 no. (25) jn. unit (r), qty=01 no. (26) signal unit (r), qty=05 no. (27) relay (r), qty=1415 nos. location:- released materials of rvnl lying at dto station near electric (g) office, sse/sig/brwd, jharkhand.

Central Government/Public Sector

CTN :45488084

16 Jun, 2026 NA

Multi City - Jharkhand

Tender For auction sale of others - disposal of scrap released materials such as: (1) location box full (r), qty=198 nos. (2) location box half (r), qty=81 nos. (3) quarter jb (r), qty=17 nos. (4) ctr/relay rack (r), qty=46 nos. (5) point machine without motor (r), qty=09 nos. (6) chock (r), qty=94 nos. (7) track charger (r), qty=66 nos. (8) ips charger (r), qty=01 no. (09) hand liver (r), qty=02 nos. (10) ct box (r), qty=20 nos. (11) signal post (r), qty=12 nos. (12) signal ladder (r), qty=11 nos. (13) signal base (r), qty=12 nos. (14) signal pole (r), qty=13 nos. (15) transfermer 230/110 (r), qty=13 nos. (16) ips (r), qty=09 nos. (17) data logger (r), qty=02 nos. (18) fire alarm pannel (r), qty=01 no. (19) ufsbi (r), qty=06 nos. (20) penal (r), qty=03 nos. (21) filter unit (r), qty=02 nos. (22) 42 u rake (r), qty=01 no. (23) jn. unit (r), qty=01 no. (24) signal unit (r), qty=05 no. (25) relay (r), qty=1415 nos. location:- released materials of rvnl lying at dto station near electric (g) office, sse/sig/brwd, jharkhand.

Extension Reel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector