Get complete information related to latest Extensometer Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Extensometer Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Extensometer Scrap Tenders.
Tender For supply of pressure gauge for d.a./lpg gas regulator, working pressure 0-2.5 kg/cm2, dial size 2 inch, with minimum 6 months warranty and valid calibration certificate from a government-approved/nabl- accredited laboratory. make: weldstar/esab/wika/ramco/techno or equivalent reputed brand. [ warranty period: 6 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply, installation and demonstration of laboratory hot plate as per attached technical specification annexure-c. make- thermo fisher scientific, ika, velp scientifica, labtech or equivalent. [ warranty period: 24 months after the date of delivery ] ]
Tender For supply of led weather proof 40 w surface/pendant mounting led tube fitting complete with corrosion resistant dust and water proof unbreakable polycarbonate body off white finish, frosted pc diffuser for glare free uniform light, protection-ip65, constant current above isolated driver, input voltage range 140-270v ac 50hz single phase with higher voltage auto cut off, pf- 0.95, thd<10%, colour temp. 5700k-6500k, view angle ? 120 degree, output lumens- 100 lm/w, cri>75, mini. efficacy of driver 85%, short circuit and open circuit protection mini surge voltage - 1.5 kv, led lm80/is:16105 test report support the same, driver shall comply the performance and safety requirement as per iec:62384/is:16104 & iec/61347-2-/61347-2-13/is:15885-2-13 with test certificate of nabl accredited laboratory shall be submitted, light source- smd type, brand/make- engraved/embossed minimum rep. warranty 03 years. make- jaquar, surya, bajaj, havells or equivalent. [ warranty period: 36 months after the date of delivery ] ]
Tender For purchase of fire safety and fighting laboratory equipment for fts department - purchase of fire safety and fighting laboratory equipment for fts department, cleveland open cup (coc) apparatus standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 c per minute (as per standard) temperature range: (-6 to 400) c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valve body: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hzsafety: overheat protection heat insulation, pensky-martens closed cup apparatus standard compliance: astm d93 / is 1448 (part 21) type: pensky-martens closed cup (motorized, digital type preferred) test cup: brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system: heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustableignition:pilot flame with automatic shutter mechanismtemperature measurement:thermometer or digital sensor (ip-28c or astm)digital temperature displaypower supply:230v ac, 50 hzsafety: over-temperature cut-off flame safety control
Tender For :purchase of chemistry laboratory equipment for basic engineering department - purchase of chemistry laboratory equipment for basic engineering department, hot plate: top plate material: cast iron ; plate size: minimum 8 inch diameter;power rating: 2000 w ; temperature range: ambient to 200 c minimumthermostatic temperature control: required; power supply: 220 240 v ac, 50 hz, ic regulated battery eliminator: ic regulated, input: 230v ac; output: 0-12v dc in steps of 2v; capacity: 1a or 2a., ammeter: dc (0 - 2 amp), voltmeter: dc voltmeter; range 10 v, analog, galvanometer: moving coil type, 30-0-30 scale, unbranded with bhel ; specification-sensitivity 0.143mm/v, water distillation unit: output capacity: 4 litres per hour (lph); ph value: 5.5 to 7.0 ; conductivity (raw water distillation):3.0 4.0 s/cm or less ; glassware material: borosilicate 3.3 glass (pyrex/duran equivalent); heating elements: silica-enclosed quartz heaters or chromium-plated element variants; power supply: 220 240 v ac,50 hz / 60 hz, single phase; automatic water level cut -off, electro analytical balance: load capacity: minimum 500 g; readability: 0.01 g; linearity: 0.02g; display: lcd/led; tare function: required; top pan type; power supply: 220 240 v; ac, 50 hz, electric bunsen burner: electrically operated, energy regulator/ control knob operating temperature 800 c ; body: stainless steel, power supply source: corded, electrically operated; energy regulator/ control knob, operating temperature 800 c ; body: stainless steel, power supply source: corded electric, supplied with a heavy-duty, heat-resistant, electric, supplied with a heavy-duty, heat -resistant, digital balance: weight 500g, accuracy 0.01g, top pan. tare function, caliberation- automatic external display type: led
Tender For supply of set of heavy-duty full gear flexible coupling with flange dia. 185 mm & pilot bore, material:en-9, die forging, hardness: 25-28 rc, coupling should be machine manufactured, with material & hardness test certificate from nabl/govt. approved laboratory. make: fenner/tss- s102 or equivalent reputed brand. (one set contains 2 nos. couplings) [ warranty period: 6 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of machinery and equipment - uv-vis spectrophotometer spectrophotometer should be of true double beam optics system. sample compartment should have dedicated one reference cell holder and one sample cell holder. system should be czerny-turner monochromator with lo-ray-ligh grade blazed holographic grating or equivalent. system should have a light source of 20-w halogen lamp and deuterium lamp. automatic switch over of light source to be possible and auto position adjustment. system should have a fixed spectral bandwidth of 1nm. system should have facility to use as stand-alone keyboard-display and with pc-controlled software. wavelength range should be from 190 nm to 1100 nm and wavelength accuracy should be 0.1 nm at d2 656.1 nm & 0.3 nm for entire range. stray light: less than 0.02% at 220 nm (nai)less than 0.02% at 340 nm (nano2) less than 0.5% at 198 nm (kcl) photometric range:absorbance: -4 to 4 abs transmittance: 0% to 400% system should have photometric accuracy : 0.002 abs at 0.5 abs 0.004 abs at 1.0 abs 0.006 abs at 2.0 abs(measured using nist930d/nist1930 or equivalent) system should have a baseline flatness: less than 0.0006 abs (1,100 to 190 nm, one hour after light source turned on) system should have a noise level: less than 0.00005 abs (700 nm). detector should be silicon photodiode only. system should have a usb drive port to connect the printers or external drives. system should compulsorily have bio-method mode of measurement for determining dna and protein concentrations. quantitates dna or protein using the absorbance at 260/230nm. system should be capable of identification of organic compounds, chemical reaction tracking and enzyme reaction measurement. pc with relevant hardware including monitor keyboard, mouse., fuming hoods the proposed floor-mounted aerodynamic fume hood (1800 1000 2350 mm) is designed for safe handling of hazardous fumes, ensuring high performance, durability, and compliance with international standards. the system should be a robust, corrosion-resistant, and safety-compliant solution with efficient airflow management, user-friendly maintenance features, and adherence to international laboratory safety standards ideal for advanced research and chemical handling applications.1) design & compliance aerodynamic structure with automatic bypass airflow system. conforms to ashrae 110:2016 / en 14175 standards, including tracer gas containment test. certified ashrae compliance required 2) construction & materials made of powder-coated galvanized iron (gi, 120 gsm, is 277 compliant) sheet thickness: 1 mm (1.2 mm for structural supports) heavy-duty base frame: 60 40 2 mm phenolic resin (6 mm) inner liner: chemical-resistant, smooth, easy to clean ss 304 worktop with 15 mm raised edges for spill containment ss 304 aerodynamic airfoil with anti- corrosive coating 3) dimensions & workspace usable workspace: 1500 mm (w) 850 mm (d) 1180 mm (h) clear viewing height: 1100 mm modular base cabinets with maintenance access 4) coating & finish 8-stage chemical pre-treatment epoxy polyester / polyurethane coating (70 80 microns) corrosion resistance validated by 1000-hour salt spray test 5) functional features vertical sliding toughened glass sash (4 5 mm), counterbalanced openable front top panel for easy maintenance aerodynamic baffle system for efficient fume removal (light to heavy fumes) flow control damper for airflow regulation 6) utilities & safety integrated gas, water, and electrical fittings in corner posts remotely operated, color-coded service valves safety partition between utilities no cable entry below sash (enhanced safety design) electrical fittings: norysis /legrand (230v, 5/16a, 50 hz) 7) accessories pp cup sink with water tap and drainage led lighting with protective enclosure adjustable leveling screws ( 10 mm) storage base cabinets with shelves and self-closing shutters 8) centrifugal blower specifications remote, silent ms + frp blower with chemical-r
Tender For corrigendum : purchase of lab equipments for chemistry lab in basic engineering department - purchase, digital electronic balance /analytical balance load capacity: minimum 500 g readability: 0.01 g linearity: 0.02g display: lcd/led tare function: required top pan type power supply: 220 240 v ac, 50 hz, digital tds metermeasuring range: 0 9990 ppm resolution: 1 ppm display: lcd automatic temperature compensation (atc): required waterproof: minimum ip67 protection power source: battery operated (button cell/aaa battery), digital ph meter benchtop model ph type microprocessor/microcontroller ph range: 0 14 resolution: 0.01 ph accuracy: 0.05 ph or better combined ph electrode with temperature sensor two or three-point calibration facility temperature compensation type automatic display: lcd power supply: 220 240 v ac 50 hz warranty minimum 1 year, laboratory heating mantle (knitted glass yarn) capacity: 500ml temperature range: ambient to 350 c energy regulator/control knob: required power supply: 220-240 v ac 50 hz, electric bunsen burnerelectrically operated energy regulator/ control knob operating temperature 800 c body: stainless steel power supply source: corded electric, supplied with a heavy-duty, heat-resistant, earth-grounded, 3-pin power cord (minimum length 1.2 meters). power consumption: between 350 and 500w power supply: 220-240 v ac 50 hz, water distillation unitoutput capacity: 4 litres per hour (lph) ph value: 5.5 to 7.0 conductivity (raw water distillation):3.0 4.0 s/cm or less glassware material: borosilicate 3.3 glass (pyrex/duran equivalent) heating elements: silica- enclosed quartz heaters or chromium-plated element variants power supply: 220 240 v ac 50 hz / 60 hz, single phase automatic water level cut-off