Get complete information related to latest Exterior Paint Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Exterior Paint Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Exterior Paint Tenders.
Tender For barana block: panipat panchayat: barana dist.: panipat annual maintenance work for water supply - painting the wooden / metal surface with synthetic enamel paint, finishing walls with acrylic smooth exteriorpaint, repairs to plaster, removing white or colour wash by scrapping and sand papering and preparing the surface smooth, painting with synthetic enamel paint.
Tender For bhoj dharti,bhoj darara,bhoj mataur, group of 3 no. of habitations annual mtc.works for water supply - providing and laying of base course of floors, providing and laying cement concrete flooring, providing and applying white cement based putty of average thickness, finishing walls with water proofing cement paint, finishing walls with acrylic smooth exteriorpaint, painting on g.s. sheet with synthetic enamel paint, repairs to plaster, removing white or colour wash by scrapping and sand papering and preparing the surface smooth.
Tender For supply of various consumable & routine maintenance items for unit 1, 2 & 3 stage: i at wtps - teflon tape : size 1/2" width x 12mtr long, m seal fast curing epoxy compound, each packet contains 50 grams of resin base and 50 grams of hardener ( 1 kg box contains 10 packets)., hss hacksaw blade,size-1/2"bx12"lx0.025"thx18tpi., wire brush with wooden handle size 50x150x300 mm, hiffin diamond lapping compound hi finator grade 14-05-30 ( in plastic injection ; per injection 5gm), rustolene 500 ml/tin, holdtite liquid joint compound[500gms/pkg]4565250014, chrome leather hand gloves for welder. size: 16 inch (400 mm), metal set putty, bearing retainer, epoxy based fast curing cold metal repair compound., oil stop leak putty 114 gms. pack, descaler [biodegradable water scale cleaner], pen oil - (500 ml/tin) heavy duty rust penetrator, molykote 1000 (1kg/tin), rust removing spray wd-40 in aersole packing of high pressure valves ., h577 pipe sealant ( per tube 50 ml ), instant flange sealant & gasketing compund h510/510, molykote 1000 spray can (400ml/270gms/can), grinding disc (wheel) size 100x4x16 mm, mos 13750 high cut (a.36) ., resinoid cutting off wheel size 350x25.4x3 mm, a24 ., wel.lead glass black, white plain glass for welders hand screen, esab/iol make gas heating torch, oxygen gas hose pipe blue 08 mm, make esab/dura., acetylene gas hose pipe red 08 mm, make esab/dura., two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, wire brush size 12" with wooden handle, cutting nozzle size 3/64", cutting nozzle size 1/16", carborandum make emery cloth roll medium iss: 50-60 size: 50 mtrx25 mm, carborandum make emery cloth roll fine iss: 80-100, size: 50 mtrx25 mm, brand emery paper smooth fine size size 280 x 220 mm, flash back arrestor for cutting torch end mounted oxygen ., flash back arrestor for cutting torch end mounted da ., flash back arrestor for regulator mounted da cylinder., flash back arrestor for regulator mounted oxygen cylinder., gas cutting nozzles (1/32"), filler gauge set of 26 blades in mm 6" long, welding helmet, welding hand gloves leather size 14" for welding assly., welding cable copper conductor having single core high conductivity, suitable for 600 amp. of quality 70 sq.mm 999/0.3 mm as per is-9857/1990 vir insulated., hand screen armour, adhesive hylomer universal blue [100 gms/pkg/nos], pvc tap roll, oil paper size 2 x 2 x 1 mm thk, pvc hand gloves acid/alkali proof, hand gloves for heat resistance up to 350 deg. celsius: hand gloves with constructed from 100 percentage kevlar para-armid fiber with a cotton liner, size 10 (400mm). heat resistance for up to 350 deg. celsius temperature., blue matching tube camel student oil colour shade ultrasonic black-663 (in 20 ml tube), teflon tape : size 1/2" width x 12mtr long, m seal fast curing epoxy compound, each packet contains 50 grams of resin base and 50 grams of hardener ( 1 kg box contains 10 packets)., hss hacksaw blade,size-1/2"bx12"lx0.025"thx18tpi., wire brush with wooden handle size 50x150x300 mm, hiffin diamond lapping compound hi finator grade 14-05-30 ( in plastic injection ; per injection 5gm), rustolene 500 ml/tin, holdtite liquid joint compound[500gms/pkg]4565250014, chrome leather hand gloves for welder. size: 16 inch (400 mm), metal set putty, bearing retainer, epoxy based fast curing cold metal repair compound., oil stop leak putty 114 gms. pack, descaler [biodegradable water scale cleaner], pen oil - (500 ml/tin) heavy duty rust penetrator, molykote 1000 (1kg/tin), rust removing spray wd-40 in aersole packing of high pressure valves ., h577 pipe sealant ( per tube 50 ml ), instant flange sealant & gasketing compund h510/510, molykote 1000 spray can (400ml/270gms/can), grinding disc (wheel) size 100x4x16 mm, mos 13750 high cut (a.36) ., resinoid cutting off wheel size 350x25.4x3 mm, a24 ., wel.lead glass black, whi
Tender For supply of naphthalene balls , cement rapid hardening quick dry cement , aqua bond putty , bag gunny 27 x 21 , varnish , candle wax dia 19 mm , anti rust spray , toilet paper , distilled water , brown sheet laminated , glass cleaner 500 ml , hand towel , wiper long handle , brush with long handle , scrubber with handle , room freshener , soap liquid toilet , hand wash liquid , disinfectant fluid white black phenoil , cleaning liquid for utensils , photocopier paper 215 x 342 mm , refill for automatic air freshener 250 ml pack , envelope size 10x14 inch , envelope size 6x12 inch , envelope size 4x10 inch , rat sticking gel , dust bin with cover combined , gash bag , detergent powder in 1 kg pack isi mark , deodorizer odonil
Tender For periodical services and other connected items at af stn 3 wing under aor of ge (af) faridabad - demolition/dismantling of brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, complete all as specified and directed ., m&l for brickwork with subclass b bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and directed ., all as per item no 02 above but except bricks., m&l for brick work with sub class b bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in cm 1:4 complete all as directed., taking down cement plaster of any description on concrete surfaces such as soffit of rcc slab, chajjas and brick walls, ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick cement plaster in cm 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed ., m&l for rendering 15mm thick in cm 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl wpc as per user manual complete all as specified and directed., m&l for rendering 10mm thick in cm 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed. ., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed ., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed ., m&l for rough cast (grit) finish plaster with a mixture consisting of crushed stone or fine gravel aggregate mixed with coarse sand and cement in the ratio of 1:1:1 over & including 12mm thick rendering in cement mortar 1:3 on fair faces of brick masonry or concrete surfaces of walls complete all as specified and directed ., m&l for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed ., m&l preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion white/tinted over a coat of appropirate primer over including a layer 2 mm acrylic wall putty to achieve desired smoothness and eveness complete by hand roller complete all as specified and directed ., m&l for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed ., m&l for preparation of newly plastered surface of walls & material & labour for applying two or more coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exteriorpaint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed ., m&l for complete removal of old decorated, plastered or pointed surfaces of ceiling by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots, filling cracks with wall care putty etc and applying two coat of white wash complete all as specified and directed ., m&l for complete removal of old decorated, plast
Tender For periodical services and other connected items at af stn basant nagar under aor of ge (af) faridabad - demolition/dismantling of brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, complete all as specified and directed., m&l for brickwork with subclass b bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and directed., all as per item no. 02 above but except bricks., m&l for brick work with sub class b bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in cm 1:4 complete all as specified and directed., taking down cement plaster of any description on concrete surfaces such as soffit of rcc slab, chajjas and brick walls, ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick cement plaster in cm 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement all as specified and directed., m&l for rendering 15mm thick in cm 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl wpc as per user manual complete all as specified and directed., m&l for rendering 10mm thick in cm 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed. ., m&l for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m&l for rough cast finish plaster(grit wash) with a mixture consisting of crushed stone or fine gravel aggregate mixed with coarse sand and cement in the ratio of 1:1:1 over & including 12mm thick rendering in cement mortar 1:3 on fair faces of brick masonry or concrete surfaces of walls complete all as specified and directed., m&l for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed., m&l preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion white/tinted over a coat of appropirate primer over including a layer 2 mm acrylic wall putty to achieve desired smoothness and eveness complete by hand roller complete all as specified and directed., m&l for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed., m&l for preparation of newly plastered surface of walls & material & labour for applying two or more coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exteriorpaint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed., m&l for complete removal of old decorated, plastered or pointed surfaces of ceiling by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots, filling cracks with wall care putty etc and applying two coat of white wash complete all as specified and directed., m&l for complete removal of old decorated, pl