Latest eye bolt Tenders | Government eye bolt Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

Central Government/Public Sector

CTN :45034272

03 Jul, 2026 NA

Salem - Tamil Nadu

Tender For bid to ras supply of dee shackles forged : : - 911100001007 dee shackles forged 12mm body dia , 911100001011 dee shackles forged 16mm body dia , 911100001015 dee shackles forged 20mm body dia , 911100001016 dee shackle 22 d x 26 d gr.80 , 911100001019 dee shackles forged 28 mm dia , 911100001023 dee shackle 30 d x 35 d gr.80 , 911100001024 dee shackles forged 45 mm dia , 911100001025 dee shackle 34 d x 39 d gr.80 , 911100001028 d shackle 1 1 2 wll 17 , 911100001302 lifting eye bolt m12 is 4190 , 911100001303 lifting eye bolt m16 is 4190 , 911100001304 lifting eye bolt m20 is 4190 , 911100001305 lifting eye bolt m24 is 4190 , 911100001410 lifting eye bolt m10 is 4190 , 911100001411 lifting eye bolt m 8 , 911100001416 lifting eye bolt m42 is 4190 , 911100001431 master link wll 17

CTN :44631490

02 Jul, 2026 NA

Bangalore - Karnataka

Tender For bid to ras corrigendum : supply of tools and hardware e e - ss m10 eye bolt- internal dia 30mm- length 40mm-30mm thread and 10mm shank with nut and washer , ss m12 eye bolt- internal dia 30mm- length 40mm-30mm thread and 10mm shank with nut and washer , m10 bolt- length 70mm-25mm thread and 45mm shank with nut and washer , m16 bolt- length 75mm-20mm thread and 55mm shank with nut and washer , m24 bolt- length 110mm-30mm thread and 80mm shank with nut and washer , m20 bolt- length 60mm-30mm thread and 30mm shank with nut and washer , m8 hexagonal bolt- length 40mm-30mm thread and 10mm shank with nut and washer , m8 hexagonal bolt- length 60mm-30mm thread and 30mm shank with nut and washer , m10 hexagonal bolt- length 40mm-30mm thread and 10mm shank with nut and washer , m12 hexagonal bolt- length 40mm-30mm thread and 10mm shank with nut and washer , m10 hexagonal bolt- length 150mm-50mm thread and 100mm shank with nut and washer , m12 hexagonal bolt- length 150mm-50mm thread and 100mm shank with nut and washer , ms platform step ladder- height 5 feet- platform size 400mmx300mm and 5 step , aluminum platform step ladder- height 7 feet- platform size 300mmx300mm and 8 step , steel measuring tape- 15m , steel measuring tape- 3m , emery cloth medium j29780 , steel tailor scale-300mm , steel claw hammer- handle 350mm and dia of head 40mm , wooden work bench- l 1500mmx w 900mmxh 1200mmxt 20mm , square wood fixed stool with footrest- height 600mm and top base thickness 20mm , screwdriver-size of the head m2 poin t2- length of blade 125mm- handle length 80mm , exam pad , thinner , white colour chalk , liquid handwash , rust remover solution- 400ml , heat resistance paper masking tape- width 25mm and length 40m , cotton canvas hand gloves- small size 300mm , electrician scissor wire stripper- l-150mm- w-8mm- h-30mm , soldering iron 60 watt , handheld digital multimeter , spike guard 4 socket- 4 switch- 4 mtr with 6 amp , temperature controlled soldering station with digital display , programmable handheld amateur walkie talkie , nylon cable tie- 150mm length , nylon cable tie- 450mm length , nylon cable tie- 300mm length , scissors- overall 118mm and blade length 56 point 6mm , miniature screwdriver set , insulation tape , mild steel power hacksaw machine , cast combination vise with anvils and pipe gripping jaws bench vise , hacksaw blade- l-300mm- w- 25mm- t- 1 point 25mm , ss cut-off wheel- dia-355mm- thickness- 3mm

CTN :45616916

31 Jul, 2026 NA

Halisahar - West Bengal

Tender For corrigendum : supply of hex head bolt 20 x 190 long with 4 mm dia hole for split pin having center distance 9mm from tail end to is: 1364(part-i) -2002 p-4.6 fitted with hexagon nut m20 to is: 1364(part-3)-2002 p-4, b20 spring washer to is: 3063 -94(reaffirmed 2021)with amendmentno.1.table-i type-b and split pin dia 4 x 36 long to is: 549-05 table-i all galvanized. [ warranty period: 30 months after the date of delivery ] ]

CTN :45642888

03 Jul, 2026 50.47 Lacs

Purnia - Bihar

Tender For corrigendum : supply of , frl 1 or 4 inch with pressure guage , quick exhaust valve 1 or 4 festo or norgen , quick exhaust valve 1 or 8 festo or norgen , spray,wd-40 cap- 400ml btl , cassette ss as per kosan carousel , guide rod for kosan introduction unit , 5 or 2 spring return valve , 1 or 2inch -f, ss ball valve , magnetic sensor , tepar strip for 90 deg bend , lock pin,chain conveyor duplex chain , switch,139a714,carousel kosncris - pressure switch , ejection puller arm , ejection pusher arm , needle valve , pneumatic cylinder 12mm or 16mm with fittings , shaft size- 40mm x 280 mm en-8 , shaft size- 40mm x 4000 mm en-8 , nut bolt 1.5inch x 10mm , nut bolt 1inch x10mm , f-mounting , ejection flexible coupling , pneumatic cylinder- 50 or 160- norgen or smc , toggle joint rod- lt-200 mm , pin of non-pneumatic filling gun , bearing no.6206 , bearing no.6304 , gas stop valve lpg 1 or 2inch , steel plate thick 10mm size 0.5mx0.5m , key pad for cuc card steel mk1v , key pad for cuc card mkii , anchor fastener length150mm dia 10mm gi , anchor fastener length150mm dia 12mm gi , anchor fastener length150mm dia 16mm gi , nut bolt length 1inch dia 6 mm , counter bolt 8mm, allenkey type, with lock nut , eye bolt for centering arm , spring,159a533,kosncris pt head , ss rod of gd or pt base , ss block of gd or pt base , linear bearing , optical cable for bar code sensor , automatic hot air sealing head , pneumatic cylinder size 500mmx50 norgan , 50 dia sealkit norgren , 50 dia sealkit janatics , solenoid coil for kosan filling scale- smc make , lpg hose of length 1 m , lpg hose of length 1.5 m , lpg hose of length 0.5 m , pencil sensor , rivet type conveyor chain , rod of kosan filling gun pneumatic type , kosan filling gun cup , dampner or kosan filling gun bush , kosan filling scale leg , lower bell for gd , vibration absorber for gd head , kosan fintec load cell for filling scale 200kg , load cell for jisl adjustment scale 650 kg , manual cvt head,kpot0122 carousel,kosncr , lifter plate for check scale , c channel of conveyor , telescopic boom pipe length 6m dia 1.5inch , drag chain , boom e plate with taflon ss thickness-10mm 1mx1m with taflon 12mm , mark iv display , reflector for kosan carousel , lpg filling gun pneumatic type , pneumatic counter , vacuum or suction indicator

CTN :45712874

20 Jul, 2026 NA

Khammam-T - Telangana

Tender For supply of impeller fitted with wear ring part no. 2 8 moc ss316 , impeller bolt with washer and lock washer part no. 26 24 24a moc ss316 , shaft with keys part no 6 32 46 moc ss316 , gasket casing part no. 73 moc ss316 by asb filled , bearing cover ib part no 35 moc ci , bearing cover ob part no 37 moc ci , casing wear ring part no 7 moc ss316.

CTN :45602227

02 Jul, 2026 5.75 Lacs

Tehri Garhwal - Uttarakhand

Tender For corrigendum : supply of 2t electric forklift - traction battery set (48v) complete , exide 516/520ah , 18x9 inch solid tyre evx30- smooth treadh01a , 16 1/4 x 6x11 1/4 solid tyre , fltr element kit m09c , connecting link with bush fitted , con link bush ev , headed pin small (con link pin evx) , con link bush ev , knuckle king pin (evx15-30 special exec) , bush for steer knuckle (evx 35) , skf thrust bearing (51108) , skf inner bearing (24780/24720/q) , skf outer brg (30206) , st. knuckle evx-left , st. knuckle evx-right , trail wheel bolt (part no.-mh798207154) , tral wheel nut (part no.-mh798207164) , oil seal , hub cap trail wheel , bushing trail axle , slotted nut1 1/4 inch unf , drive rim stud , hx nut 12x1.5 , brake shoe assembly 29373168 (tvs make) , rh wheel cylinder (29662280) , lh wheel cylinder (29662279) , 1mast cyl assy- 7/8 inch , brake hose assy 26 inch , rh br tube nut gro ev , lh br tube nut gro ev , hydraulic oil vg 68 , dot3- brake fluid , servicing/repairing/oerhauling of electric forklift truck (model evx20 hvm , capacity- 2t , sl. no.- 191126)

CTN :45725385

13 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For tender for finish machining of eye bolt/screw as per drg. no. 2a26-02-155

CTN :45551786

30 Jun, 2026 NA

Sonitpur - Assam

Tender For bid to ras supply of of the walls in the rooms , corner sheet glass shelf with two shelf assembly , soap dish ss comma flat back complete with screw , 2000 ltrs anaerobic frp oblique ldpe septic tank alongwith all accessories , ppr pipe 32 mm dia , ppr pipe 20 mm dia , ppr socket 32 mm , ppr elbow 90 degree 32 mm , ppr elbow 20 mm , ppr female thread elbow 90 degree 20 mm dia , ppr female thread t 20 mm dia , ppr plain t 32 mm , ppr reducer t 32 to 20 to 32 mm dia , ppr union 32 mm , tank connector 32 mm , pvc wall clamp 32 mm , pvc wall clamp 20 mm dia , float valve 20 mm , gate valve 32 mm , m seal 150 gm pkt , taflon tape roll , solvent cement 150 gm tube , pvc waste pipe 32 mm and 1m long , chromium plated waste coupling 32 mm dia , non skid ceramic tiles of size 300mmx300mm on the floor minimum thickness shall be between 6 to 8 mm tiles , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick , cp grating 100 mm dia , pvc socket 110 mm dia , pvc bend110 mm dia , s trap vitreous china , curtain arrangement drapery and rod made of 25 mm dia and 1600 mm long alongwith fixing arrangement complete , pvc air pipe 32 mm dia , white cement , vitreous china wash hand basin white of size 450mmx300mm with vitreous china pedestal , ppr reducer elbow 32mm x 20mm dia , brass cp wall mixer for mixing hot and cold water screwed down for ppr pipe of dia 20mm , brass cp jet water spray for ewc , plastic dustbin of capacity 40 ltrs , distribution box 8 way spn comma 240 volts copper bus bar and neutral link earthing stud , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5 m long , cable pvc insulated electric cables heavy duty copper conductor of size 1 point 5 sqmm single core , cable pvc insulated electric cables heavy duty copper conductor of size 4 sqmm single core , cable pvc insulated electric cables heavy duty copper conductor of size 2 point 5 sqmm single core , pvc casing capping of size 1 inch medium grade snow white , pvc casing capping of size 3 oblique 4 inch medium grade snow white , switch piano 5 amp 230 volts flush type one way snow white , led tube light fittings 15w 230v box type 4 feets , led mirror lights 1 feet 5 watts , steel screw full thread with rawl plug 1 1 oblique2 inch size 100 nos per pkt , pvc switch board snow white size 6 inch x 6 inch for sockets , pvc switch board snow white size 7 inch x4 inch for sockets and switches , pvc switch board snow white size 8 inch x 10 inch for main switches db , pvc l bend and t junction joint for pvc casing and capping , switch socket combination snow white multipurpose 2 in 1 comma 15 amp 230 volts , switch socket combination snow white 5 amp 230 volts , service bracket 40mm dia gi tubing medium grade 1 point 5 mtr long , service cable pvc insulated aluminium conductor heavy duty 10 sqmm 2 core , ceiling rose three terminal snow white , led bulk head fitting with led lamp 10 watts , pvc flexible wire copper conductor multi stranded 0 point 0016 oblique 76 , pvc flexible conduit pipe 15 mm dia , pvc round oblique square block , plastic body fresh air fan with louvers shutter of 200mm sweep , electric geyser 5 star of capacity 25 ltr , fire extinguisher of one kilogram capacity dry power type along with its accessories , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and //bid details 2 / 98 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled , aluminium strips 25 x 3 point 0 mm , galvanized iron strip 32 x 6 mm , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , gi pipe 40 mm dia light grade , nut and bolts 6 mm dia 30 mm long with check nut and washer , in

CTN :45712090

11 Jul, 2026 NA

Ranchi - Jharkhand

Tender For procurement of heavy-duty double ply duples web sling, wire rope sling, eye bolt & d-shackles with f

Eye Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector