Latest fabricated canopies Tenders | Government fabricated canopies Tenders

State Government

CTN :45272866

19 Jun, 2026 29.60 Crore

Shikaripura - Karnataka

Tender For survey, investigation, design, supply, erection, testing and commissioning of tank filling scheme for filling 15 number of tanks, comprising of construction of barrage, in take structure, pumping machineries, 11/0.433 kv electrical sub station, transmission line rising main by lifting water from dandavathi river in soraba taluk shivamogga district including supply of spares parts & tools, operation & maintenance for five years after successful commissioning of the work for yadagoppa tank filling scheme works on turnkey basis

State Government

CTN :44962078

26 May, 2026 25.09 Crore

Sindhanur - Karnataka

Tender For corrigendum : survey, investigation, design, supply, erection, testing and commissioning of lift scheme comprising of construction of bridge cum barrage(bcb), intake structure, pumping machineries, 11/0.443kv electrical substation, transmission line, terminal bay, rising main, delivery chamber, for supplementing water to the suffering atchkat of tail end portion of sub distributary 54/3r of distributary-54 under tlbc by lifting water from sindhanur halla near mullur village in sindhanur taluk, raichur district including supply of spares parts and tools, o&m for five years after successful commissioning of the work for sindhanur lis cum bcb works on turnkey basis.

CTN :45143795

26 May, 2026 16.66 Lacs

Mydukur - Andhra Pradesh

Tender For provision towards purchase of necessary items (equipments) to government hospital in mydukur municipality. - supply, transportation and installation of desktop with fully loaded software as desired, with the following configuration. 1. processor: intel® core? i7-12th generation or higher version processor with intel® hd graphics 770 (2.9 ghz base frequency, up to 4.9 ghz with intel® turbo boost technology, 25 mb l3 cache, 12 cores 20 threads) intel q670 chipset 2. memory: 8 gb ddr4-3200 mhz sdram (1 x 8 gb) memory slots 2 dimm 3. hard drive 512gb ssd (hard drive 2 nd 1 tb 7200 sata hdd ) 4. 1 audio line in; 1 audio line out; 1 hdmi; 1 rj-45; 1 vga; 4 usb 3.0; 4 usb 2.0 5. operating systems: windows 11 pro professional 64 bit with product key license. 6. communications (intel wi-fi & blue tooth) 7. preloaded with latest version of antivirus symantec/ mcafee / nod32 / e-trust / avast internet security / kaspersky / quick heal / escan / msecure with following features: antivirus, antispyware, intrusion prevention browser protection with single management console with 3 year subscription with support updates and patches. 8. accessories: with required connecting cables and driver media should be supplied. 9. warranty: 3 year standard on-site comprehensive hardware warranty (including o.s support, spares- parts/service/labour/on-site) makes: hp prodesk or its equivalent in dell, supply, transportation and installation of all-in-one (print, copy, scan) with duplex, auto document feeder features: -print resolution 600 x 600dpi -print speed (a4) 27ppm -auto duplex printing standard -available paper size for auto duplex print a4, letter, legal (*1), indian legal, fulllscape -copy copy speed (a4) 27ppm maximum number of copies up to 999 copies scan type colour contact image sensor scan resolution optical up to 600 x 600dpi pull scan yes, usb and network makes: makes: canon imageclass mf244dw /hp/brother dcpb7535dw or its equivalen, supply installation testing and commissioning of dg set complete with 1500 rpm diesel engine of suitable bhp & ac brush less spdp alternator mounted on a common base frame & coupled through a flexible coupling or close coupled.alternator: it shall be self-regulated, self-excited and confirms to is: 13364/1992 or latest version with regulation of +5% from no load to full load, ip23, with standard alternator protection (over voltage, over speed& under voltage).diesel engine: it shall have residential silencer, up to 10 m exhaust piping, electronic / mechanical governor, manual & electric start, batteries, fuel tank & piping, control panel (16 g) with spn(for 5 kva)/tpn mccb of required rating (25/36/50 ka) with plc based engine controller supplied by oem, ammeter, voltmeter, frequency meter or multi-function meter, energy meter & hour meter, engine instruments panel, avm and automatic voltage regulator. the diesel engine shall be capable of providing 10% overload for 1 hr for every 11 hrs of continuous running at full load. the dg set shall be supplied with initial filling of fuel, lube oil, coolant oil as per oem specifications and shall be tested at site.acoustic enclosure: weatherproof, powder coated acoustic enclosure for dg set for sound attenuation fabricated from 1.6 mm crca sheet steel (structure) with side wall fabricated from 1.6 mm crca sheet and filled with foam as per cpcb norms latest amendments & is 8183. the doors are fabricated from 1.6 mm crca sheet packed with acoustic material, floor of ms chequered plate 5.0 mm thick, all doors/ opening are sealed with neoprene/ epdn gaskets.the dg set shall be maintained for two years after commissioning by the supplier including regular servicing,cost of consumables etc complete as specified by the oem along with warranty for two years.the enclosure has built in fuel tank, residential silencer (isolated from main dg chamber) with protection and tripping of dg set against temperature of more than 50 °c. all controls for opera

corporations/Associations/Others

CTN :45199727

25 May, 2026 NA

Kolar - Karnataka

Tender For auction sale of used scrap bicycles,used / scrap induction stoves,obsolete / discarded, medical oxygen filters,used / scrap / condemned x-ray machine,used scrap ms stands,used / scrap mixed copper items,used broken carbide tipped dead centres,used broken steel measuring tapes,salvaged / condemned beml equipment bl06,salvaged / condemned beml equipment be300dme,salvaged / condemned beml equipment be200,salvaged / condemned beml equipment be60,salvaged / condemned beml equipment be220,scrap ss retort,scrap engine assy,condemned scrap radiators,salvaged / condemned beml equipment be450,scrap aluminium electrical cable,scrap control panel board,rusted welding coils,scrap automobile spares,used scrap small casting forging bushes,condemned scrap machines,scrap track shoe profile end cut pieces,used scrap sheet metal parts,scrap codemned ms cabins,scrap / codemned ms long structure,scrap dc wheels,scrap m.s. turning and boring chips,scrap surge capacitors with copper terminals,m s turning and boring chips rusted, powedered,cond hyd cylinders, piston rods, shafts,aluminium turning and boring chips,cond bevel gear forgings,used / damaged electrical motors,obselete heavy, smal and medium casting,m/ced casting,scrap plastic welding spools,scrap brake shoe liners,condemned scrap hoses,used scrap miscellaneous belts,damaged tyres,condemned scrap filters,scrap used x-ray films,used scrap batteries,scrap empty oil tins,scrap empty paint tins,condemned used empty plastic barrels,scrap metallic oil drums,scrap plastic items,cond used batteries

Central Government/Public Sector

CTN :44993105

19 May, 2026 NA

Bilaspur - Chhattisgarh

Tender For corrigendum : supply of 2000 kva e 1500 rpm, 415v, 0.80 pf lag , prime power dg set with radiator on common base frame. , fuel day tank of 990 litres capacity with accessories , 24v dc, 360 ah, minimum, lead acid automotive type battery , 24 v dc float cum boost battery charger , necessary fuel piping from day tank to engine , silencer , exhaust piping , with insulation and aluminium cladding upto 30 meters height with supports , galvanised pre-fabricated support structure for exhaust piping -common for two dg , acoustic enclosure for one dg with ventilation fans, exhaust fans, if applicable and lighting fixtures. , lt power, control and instrument cable including all accessories like lugs, glands, ties etc . , b- check kit filters to be supplied at the time of commissioning , first fill of lube oil, coolant and coolant conditioner to be supplied at the time of commissioning , tools and tackles for offered dg set. , alternator phase side and neutral side terminal box with ct , mandatory spares for dg sets and amf panel , amf panel for dg set , supervision of erection of dg set and accessories , supervision of testing, commissioning and load trial of dg set and accessories. , total freight charges for all supplies including spares

CTN :45048307

08 Jun, 2026 NA

Tarapur - Maharashtra

Tender For : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of spares for diese

CTN :44624134

08 Jul, 2026 NA

Delhi - Delhi

Tender For corrigendum : procurement of spares for mirage aircraft - cable assy, cib ng (cockpit interface box), mdpu- power supply module, circuit card assembly, ewsc-processing board, hbj-hv power supply, tcr ng board, reference channel module, mdr ps board, md rf dcu 1, mdr rf dcu 2, mdr wide band extractor, dp wired structure, mdr procesing board, tua tsa 2535, frame front assembly, ast board, equipped gyroscope structure, power supply module, power supply module, main housing, power supply unit, management video module, interconnection module, front structure, mia pcb with software, rear structure, wiring exten rack ii, peak power sensor, ewsc-wired structure, ins totem (internal navigation system)

Central Government/Public Sector

CTN :45034418

18 May, 2026 10.89 Lacs

Sidhi - Madhya Pradesh

Tender For corrigendum : supply of spares for 190t dumper d d - tire valve assy-part no.-992wt03117 , tire valve assy , clamp structure , bolt , tire valve clamp plate , circular duct flexible-part no.-992em60403 , o ring

CTN :44969592

02 May, 2026 NA

Panvel - Maharashtra

Tender For supply of electricla spares and supplies - 3.7 kw motor rewinding, 4-way jb installation with support — 400w light for planning &, store area, led lights 400w installation with support — planning & store, area and other locaiton as advised, 4c × 4 sq.mm cable laying — mcc to commercial shed, loading/unloading boom-a lcs, conveyor boom-a motor,, bypass conveyor boom-a motor, bypass conveyor boom-b, motor, conveyor boom-b motor and other locaiton as advised, 3c × 2.5 sq.mm cable laying — mcc to commercial shed:, conveyor boom-a lcs, bypass conveyor boom-a lcs, loading &, unloading boom-b lcs, conveyor boom-b lcs, bypass conveyor, boom-b lcs and other locaiton as advised, 75 × 50 mm cable tray angle & support — commercial shed, loading & unloading boom, 4c × 16 sq.mm al cable laying — storage shed du new motor, and other locaiton as advised, 4c × 1.5 sq.mm cable laying — filling shed du new lcs, mcc for, new purging unit, valve changing shed to mcc for new valve, changing machine lcs, dpt shed to mcc for new valve, changing machine lcs, 4c × 2.5 sq.mm cable laying — mcc to 24-head carousel, earthing relay, mcc room to 48-head carousel earthing , to 12-, head carousel earthing, 2c × 1.5 sq.mm cable laying — lpg pump house jb to lcs &, instrument for lpg pump, 12p × 1.5 sq.mm cable laying — lpg pump house jb to jb, instrument for lpg pump, 4c × 4 sq.mm cable laying — lpg pump house to mcc for lpg, pump lcs, 4c × 4 sq.mm cable laying — filling shed to mcc for conveyor, dus, earth pit installation — commercial shed (earth digging, gi pipe, fitting, chamber making, gi busbar, chequer plate frame &, chequer plate), earthing strip laying 50 × 6 mm — commercial shed earth pit to, 47.5 kg filling scale, platform structure — dismantle, filling shed near 24-head, carousel, weight scale unit stand & base frame fabrication & installation, — commercial shed, 4c × 16 sq.mm cable laying — valve changing shed to mcc for, new valve changing machine motor, dpt shed to mcc for new, valve changing machine motor, storage shed to mcc for new, du motor, lpg pump house telephone shifting & cable laying, cable tray 75 × 50 mm laying with angle support — commercial, shed, valve changing shed, storage shed, ms plate 1500 mm × 1500 mm × 6 mm modification &, installation — commercial shed hydraulic jack, lightning arrestor height extension for lps (tt gantry rooftop /, filling shed top), new lightning arrestor installation for lps (filling shed &, commercial shed top), earthing strip dismantling & shifting 50 × 6 mm for earthing grid, msv area / lpg pump house manifold & msv manifold /, planning room / storage shed), earthing strip installation 25 × 3 mm for pipe-end flange (receipt, station fencing — all areas / tt parking area fencing / pump, house manifold & msv manifold), hydrant monitor height extension — dismantling and, installation, pipe cutting and welding with flange (tt parking, area / commercial shed loading and unloading), hydrant monitor structure and platform with railing shifting,, fabrication and installation (tt parking area), hydrant monitor railing fabrication and installation (near, counting platform / near lpg pump house / msv area), gi fencing fabrication and installation (3 m × 2 m) — near, counting platform, earthing strip laying with clamp & fabrication 25 × 3 mm (lpg, pump house shed roof to bottom and other locaiton as advised), water pipe 1" line installation with fitting (commercial shed, composite cylinder area), ovcm vent pipe 1" line modification with flange joint (filling, shed), sprinkler pipe 2" line cleaning & modification with flange joint, (msv top area), commercial shed evacuation — vent pipe 1" line modification &, installation with flange joint, conveyor and gi pipe dismantling work — length 45 mtr., (commercial shed valve changing shed connecting platform), platform installation for valve opening of cylinder (filling shed), stand fabrication &