Latest fabricated item scrap Tenders | Government fabricated item scrap Tenders

Central Government/Public Sector

CTN :45591678

06 Jul, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ferrous new cut pcs consisting of angle, plate, channel, grider, structure, rod, round, bar, tie bar, rectungular pipe, flate, sheet etc of sorts & sizes note :- 1. loading by purchaser. 2. cutting not allowed. 3. delivery not allowed against part payment 4. material should be delivered in sequence as per location mentioned above. location:-lying at two places - 1- at travereser. 2- line no -12 near oil godawon ward-a in plot-a

Central Government/Public Sector

CTN :45593989

25 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of others - scrap cond. proposed abandoned overhead tank , consisting of rcc,steel total qty 01 nos structure. these quantity are only indicative 1)r.c.c. only 15.87 m3 approximate 2) steel 795.024 kg approximate note 1 any other material found nearby the lot & it will not be delivered. 2. delivery of lot by texture unit wise "as is where is basis". 3. it is strictly advised to bidder to see the lot personally before biding for the lot, any dispute about quantity will not be considered after bidding 12. cutting, dismantling may be allowed for easy loading purpose at the cost and risk of purchaser 4. dismantling permitted up-to ground level only. 5. purchaser should ensure that during cutting dismantling nearby structures building should not be affected. 6. purchaser will be fully responsible for any mishaps. 7. trains operations and other railway work should not be disturbed and suitable banners at work place has to be arranged by purchaser. 8. free delivery up to 50 days is permitted. 9. before delivery complete removal of rcc, cc, bricks masonry and rubbish from site will be permitted. 10. the land should be cleared of all debris. 11. approachable by pakka road is about 200.00m away from this rcc tank and to approach to the tank many railway tracks are to crossed. 12. delivery of lot by texture unit wise "as is where is basis 13. stock holder is responsible for correct identification of material. 14. if any other material except provided in description is found while delivery, which is strictly restricted & it cannot be delivered 15. g.j. pipes are returnable items will be submitted in depot (sse (works) office). 16. purchaser will be fully responsible for damaging any railway property like damaging of railway tracks, ohe lines etc. 17. railway tracks are there near this abandoned water tank and ohe electric line is also there over the track. so it would be complete responsibility of the purchaser to secure these railway tracks, ohe electric lines and other railways assets without damaging these assets. 18. purchaser has to inform to sse (works) office at least 3 days prior so that the other concerned departments sses having their materials and facility nearby may be informed (like trd, p-way etc.) and these sses or their representatives would be present during dismantling of the structure and may give instructions to secure their materials and facilities which has to be protected with all the majors as instructed by them has to be followed by the purchaser for dismantling work.

corporations/Associations/Others

CTN :45582797

01 Jul, 2026 NA

Nadiad - Gujarat

Tender For auction sale of acsr dog conductor,control cable,gi structure material,ms scrap,cables,copper pipe and 3-ph motor scrap,11kv reactor,isolator,transformer,transformers as per lot description,transformer-66 kv ct/ pt/la/kvt,220 kv bushing,battery set,misc aluminum scrap,empty oil barrel (unserviceable),post insulator with metal parts,disc insulator,fax machine

Central Government And Public Sector

CTN :45591795

18 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For auction sale of others - total qty.= 03 nos., description: - scrap and unserviceable masonry structure of abandoned service building like old waiting rooms at bef, skt & khs stations with abandoned building compnents including estimated visible quantities with total plinth area of 1,064.23 sq. meters. remarks - 1) dismantling of the above service buildings will be done by the purchaser at his own cost and risk and without causing any loss to any railway property. purchaser will demolish and clear up to ground level only. while dismantling explosive should not be used. all the debris, unserviceable materials to be cleared from site to outside railway land by the purchaser. 2) any loss due to theft, accident etc. shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railway. 3) rail post and purlins as visual are offered for auction. special remarks - 1) due to complexity of lot, free delivery period against this lot will be 80 days as per railway board letter no. 2015/rs(s)/709/5 dated 29/01/16 under chapter no.-7.4. 2) material to be sold on as is where is basis and will be delivered in numbers.

Central Government And Public Sector

CTN :45591794

18 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For auction sale of others - description: - scrap and unserviceable masonry structure of abandoned old ce construction office and engineering hall including damaged ac sheet roofing & abandoned building compnents including estimated visible quantities at bilaspur with total plinth area of 1,043.24 sq. meters. remarks - 1) dismantling of the office of old construction, dy. ce office and engineering hall will be done by the purchaser at his own cost and risk and without causing any loss to any railway property. purchaser will demolish and clear up to ground level only. while dismantling explosive should not be used. all the debris, unserviceable materials to be cleared from site to outside railway land by the purchaser. 2) any loss due to theft, accident etc. shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railway. 3) auction components do not include chain link, barbed wire fencing, tie bar panel, pvc doors and asbestos ceiling, water supply fittings, electrical equipment, mirror and glass. the same has to be return back to stockholder/custodian. 4) rail post and purlins are offered for auction. special remarks - 1) due to complexity of lot, free delivery period against this lot will be 80 days as per railway board letter no. 2015/rs(s)/709/5 dated 29/01/16 under chapter no.-7.4. 2) material to be sold on as is where is basis and will be delivered in numbers.

CTN :45580224

26 Jun, 2026 78.61 Lacs

Darjeeling - West Bengal

Tender For supply of coconut oil soap noodles triclosan ethyl lactate zinc pca salicylicacid manuka concentrate willow extract tea tree oil , d ifa re 16 chlorhexidine gluconate 4 containing detergent with bathing sponge for preoperative bathing , d ifa re 16 diclofenec sodium10 mg methyl salicylate 150 mg menthol 50 mg absolute alcohol 50 mg tube 15 gm , d ifa re 16 gel diclofenac sodium methyl salicylate menthol absolute alcohol in nano emulsion , d ifa re 16 cross linked sodium hyaluronic acid 1 2 dot 9 mda 22mg ml 4 ml pfs , d ifa re 16 undernatured collagen peptide type ii magnesium bisglysinate l citrulline vit e , d ifa re 16 diclofenac diethylamine 4 and absolute alcohol topical solution non aqueous qps 15 ml , d ifa re 16 antibiotic impregnable bone graft pellets , d ifa re 16 centhaquine citrate lyophilized 1 dot 0 mg vial inj , d ifa re 16 sugammadex injection 100mg ml vial of 5ml , d ifa re 16 b hex ring , d ifa re 16 human chorionic gonadotrophin 5000iu inj , d ifa re 16 flurbiprofen 0 dot 1 with bak 0 dot 004 polyvinyl alcohol 1 dot 4 bott of 10ml , d ifa re 16 brimonidine tartrate 0 dot 1 with cmc soc in 5ml bott , d ifa re 16 carboxymethycellulose 0 dot 5 with soc glycerine erythritol levocarnitine in 10ml pack optive , d ifa re 16 brimonidine tartrate 0 dot 2 timolol 0 dot 5 with with bak ii pack of 5ml , d ifa re 16 bmatoprost 0 dot 3 timolol 0 dot 5 with bak 0 dot 005 sodium chloride dibasic sodium phosphate citric acidin 3ml pack , d ifa re 16 2 dot 7 3 dot 0 mm 2 dot 4 mm headless variable pitch threaded compression screw titanium 9 to 50 mm length dot it should be usfda , d ifa re 16 3 dot 5mm lcp extra articular distal humerus plate right and left 6 7 8 10 12 holes with 7 locking and 2 cortical screws dot implants should be usfda , d ifa re 16 3 dot 5mm distal tibial medial locking plates with at least 6 holes in head and 4567891011 12 holes for shaft with 8 , d ifa re 16 6 hole 3 dot 5 mm titanium dcp plate with 14 mmcortical screw 10 nos , d ifa re 16 7 hole 3 dot 5 mm titanium dcp plate with 16 mm cortical screw 10 nos , d ifa re 16 8 hole 3 dot 5 mm titanium dcp plate with 18 mm cortical screw 10 nos , d ifa re 16 lcp proximal radial plates 2 dot 4 2 dot 7 mm for radial head rim plates and neck plates right left side 2 4 holes in head and , d ifa re 16 tibial nailing system expert type titanium consisting of expert tibial nail 1 nos locking bolt 5 nos end cap 1 nos size 8 , d ifa re 16 posterior stabilised fixed bearing knee with assymetric tibia dot cobalt chromium femoral component matching polyethylene fixed , d ifa re 16 primary total knee replacement prosthesis high flexion oxinium consisting of 1 dot fermoral component option of cr or ps , d ifa re 16 vac hydrophobic dressing with 400 600 micron size reticulated structure foam small sizemedium size large size extra large and , d ifa re 16 semi rigid polyester cast which allows controlled mobility 7 dot 5 cm 3 dot 6 metres blue , d ifa re 16 semi rigid polyester cast which allows controlled mobility 7 dot 5 cm 3 dot 6 metres red , d ifa re 16 padded synthetic splint 10cm 40 cm precut , d ifa re 16 padded synthetic splint 10cm 76 cm precut , d ifa re 16 padded synthetic splint 10cm 4 dot 6 metres roll , d ifa re 16 padded synthetic splint 12 dot 5cm 4 dot 6 metres roll , d ifa re 16 orthosuction with dual filter and dual curved tip short and long with tubing 2 dot 5 m 6 8 mm , d ifa re 16 polydioxanone barbed bidirectional suture with taper point half circle needles different sizes size 2 size 3 to 0 box of 12 , d ifa re 16 vacuum dressing set consisting of small size polyurethane foam pressure sensor sealing material //bid details 2 / 90 tubing and cannister , d ifa re 16 vacuum dressing set consisting of medium size polyurethane foam pressure sensor sealing material tubing and cannister , d ifa re 16 vacuum dressing set consisting of large size polyurethane foam pressure sensor sealing material tubing and cannister , d ifa re 16 synthetic bone graft wedge

CTN :45072222

18 Jun, 2026 NA

Goa - Goa

Tender For bid to ras repair, maintenance, and installation of plant systems equipments- frame work: ms / rcc, sheet, repair of control console to arrest ingress of water/ humidity by use of qty 20 rcc blocks of dimension 04 feet x 02 feet x 06 inches (height). 2.2 repair of roof of control console to protect against sun light towards ensuring controlled temperature which is required for electronic equipment held in it. the protective structure would consist of vertical square tubes of dimension 40 x 40 mm and length 128 feet clamped onto the side wall body of the container. a horizontal framework 25 x 25 mm of similar raw material (square tube of dimensions 40 x 40 mm, 178 feet length) shall be fixed onto these vertical rods. 2.3 repair of fuel tank. 2.4 repair of qty 02 mtb side platforms used for inspection and adjustment during ground run/ testing of engine. 2.5 provisioning of consumables for maintenance of dg set of the console.

State Government

CTN :45563102

25 Jun, 2026 23.05 Lacs

Bicholim - Goa

Tender For tender for the work of enhancement of 100kva dtc mathwada to 200 kva alongwith replacement of dp structure, and conversion of 1ph 4w to 3ph 6w lt line alongwith replacement of deteriorated material under s.o. mayem, sd i, bicholim goa.

State Government

CTN :45558226

22 Jun, 2026 34.31 Lacs

Chamba - Himachal Pradesh

Tender For tender for prov. and fixing of equipment / material , design, erection, testing , commissioning for sop to jsv for inspection hut at cheel bangla chowari by prov. 11/0.4 kv 100 kva dtr along ht, lt line in es chowari-ii (u) esd chowari ed dalhousie - (a) supply part-11/.4 kv 100 kva distribution sub station, 11/.4 kv 100kva dtr (rec sep. ord 11/1976, prov. st pole pole 9 mtr. long w/l 220kgs, muff for steel tubular pole with concrete filling, x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line, ms a.i.(50x50x6 mm), length: 2800 mm x(2 nos for las ), x-arm: [channel iron (75x40x5 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer], ms a.i.(50x50x6 mm), length: (2800 mm) x 1 no., ms a.i.(50x50x6 mm), length: (950 mm) x 2 nos. of bed knee bracing, ms angle iron (50x50x6 mm), length : (2800 mm) x2 nos for transformer lt distribution box and g.o switch fixing assembly, g.i. wire for earthing, ms angle iron (50x50x6 mm), length : (450 mm)x1 nos for transformer lt distribution box and g.o switch fixing assembly, g.o. switch handle supporting: [c.i. (75x40x6mm), length: 460mm for transformer lt distribution box and g.o switch fixing assembly, g.o ab switch unit (11kv,400,663ka) tripple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class, discs insulator sets (comp. 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) i/c dead end clamps etc.), stay set complete, stay wire (7/3.15mm)( 10 kg per stay set), pipe earthing with gi,charcoal & salt, prov. lt distribution panel with mccb (160 a, 10 ka, 4p,1 no.) & sfu (32 a 5 no. rewireble) for 100kva trf. as per specification, half clamp (m.s. flat 50x6), full clamps (m.s. flat 50x6), m. s. nuts & bolts off sizes (galvanised coated) [prefarably 16mm or more (with flat and spring washer), aluminium thimbles 300 mm sq., copper thimble 200 mm sq., danger plate, barbed wire (rec sp f 3/1981), lt cable 3-1/2 core-185mm sq., alluminium paint, prov.acsr, 6/1/3.35 mm, chain link fencing , angle iron, gate etc. for transfromer fencing, prov. transformer bed plinth for 1x400kva s/stn structure complete with cc 1:6:12 r.r. massonery & plastering etc. a/w chain link fencing, angle iron gate etc. for dtr fencing., lt switched caapcitors 36-kvar for 100 kva dtr, trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure)., supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment)., fine dressing of the ground., spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately)., supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : screened through sieve of i.s. designation 20 mm, filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded)., providing and fixing korean grass turf superior qualitywith earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days

Central Government/Public Sector

CTN :45550383

10 Jul, 2026 NA

Kapurthala - Punjab

Tender For set of carline for lhb bangladesh non ac chair car coaches note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25wecbgcarline version 2, packing instruction: pi185 version 02 carline assly:- the supplier shall pack theone c/set (segments) of carlines in a suitably designed robust returnable mettalic cage/ structure in such a way that carlines shall not get entangled, damaged, twisted , dented during transportation, storage, handling and lifting and to avoid scratches onouter surface suitable enviroment friendly cushioning material is to be placed between two segmemts. transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate one tonne material load in static & moving condition of one coach set of carline. the bottom part of this packing cage//pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accomodate fork lifter arms for lifting & transportation. it should have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it shouldhave firm's dentification/colour mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description , drg no./spec., qty., firm's name & address and despatch date etc. for identification. [ warranty period: 30 months after the date of delivery ] ]

Fabricated Item Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors