Latest fabricated structure Tenders | Government fabricated structure Tenders

CTN :44654175

09 Apr, 2026 35.00 Lacs

Hyderabad - Telangana

Tender For corrigendum : providing of selection of laboratories for testing of products/material - for topographical survey with contour map, geotechnical investigation , arch design and drawings , structural engineering consultancy , dbr and preparation of estimate; buyer to use ..

CTN :44261289

13 Apr, 2026 NA

Leh - Jammu And Kashmir

Tender For corrigendum : supply of supply of cdl relocatable , supply of constr material , supply of structural meterial , supply of elect items , supply of misc items

CTN :44751058

24 Apr, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of mt shed , supply of constr material , supply of structural material , supply of elect items , supply of misc items

Central Government/Public Sector

CTN :44715987

09 Apr, 2026 NA

Bhilai - Chhattisgarh

Tender For various repair jobs of emd - overhauling/dismantling of the existing w ater drainer by isolating the drainer by putting blank plate after isolation valve. purging/removal of trapped gas from the seal pot/pipe line by injecting st eam/nit rogen. revisioning of all parts & cleaning of pot. if required, the complete seal pot w ith pipe line has to be new ly fabricated & erected as per the instruction of o.a. or as per draw ing. after erection, testing of pot by injecting st eam/nit rogen and de-isolation/commissioning. the condensate pipe from w ater drainers has to be laid to the nearest storm w ater manhole or as directed by o.a.s representative. painting of w ater drainer and pipes to be done after the erection job , "technical cleaning of gas pipeline water drainers. the w ork involves closing/blanking of valves, st eam purging of pipe/drain pot and opening of f langes of seal pot and removal of muck/deposit from pots, revisioning of gas inspection valve,w ater filling valves,condensate valves. fixing of new packing and tightening of f langes. filling of w ater in the seal pot and de-blanking of w ater drainer/opening of valves. checking for any leakages and rectification of the same " , the job involves cutting/dismantling of corroded structures like column, platforms, w alkw ays, staircases etc. at height. before cutting of any structure, the nearby pipe lines or any other equipment to be supported f irst. the dismantled structures should not be throw n from height. all the dismantled structure to be kept at one place as directed by o.a.s representative for disposal by bsp , the job involves fabrication of st eel structures like column, platforms, w alkw ays, staircases etc. by type 1 electrode, as per approved draw ing / specification or as directed by oa/oa¿s representative complete in all respect including painting. fabricated structures w ill have to be erected by the contractor at height as per the direction of operating authority , the job involves w elding of tack w elded pipes, gland compensators, disc compensators, flanges, st eel structures, gas pipeline equipment, plates, pipes, structures w ith type 1 w elding electrodes , dismantling of gas pipe line or any other pipe line by cutting, including handling and stacking, cutting into pieces and sections as directed by oa/oa¿s representative & stacking at designated location. before cutting the nearby pipe lines/platforms/equipment to be supported. all dismantled structural items to be kept at a particular place, as show n by o.a.s representative for disposal by bsp , job involves erection of fabricated/available pipes at locations show n by o.a./o. a' s representative, including dia. 100mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves,compensators, saddle supports etc. also to be erected, as directed by o.a , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 100mm and up to dia. 200mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 200mm and up to dia. 500mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves, compensators, saddle supports etc.also to be erected, as directed by o.a. , overhauling of valves up to d

Central Government/Public Sector

CTN :44698679

09 Apr, 2026 1.39 Crore

Bhilai - Chhattisgarh

Tender For providing of custom bid for services - various repair jobs of emd - overhauling/dismantling of the existing w ater drainer by isolating the drainer by putting blank plate after isolation valve. purging/removal of trapped gas from the seal pot/pipe line by injecting st eam/nit rogen. revisioning of all parts & cleaning of pot. if required, the complete seal pot w ith pipe line has to be new ly fabricated & erected as per the instruction of o.a. or as per draw ing. after erection, testing of pot by injecting st eam/nit rogen and de-isolation/commissioning. the condensate pipe from w ater drainers has to be laid to the nearest storm w ater manhole or as directed by o.a.s representative. painting of w ater drainer and pipes to be done after the erection job , "technical cleaning of gas pipeline water drainers. the w ork involves closing/blanking of valves, st eam purging of pipe/drain pot and opening of f langes of seal pot and removal of muck/deposit from pots, revisioning of gas inspection valve,w ater filling valves,condensate valves. fixing of new packing and tightening of f langes. filling of w ater in the seal pot and de-blanking of w ater drainer/opening of valves. checking for any leakages and rectification of the same " , the job involves cutting/dismantling of corroded structures like column, platforms, w alkw ays, staircases etc. at height. before cutting of any structure, the nearby pipe lines or any other equipment to be supported f irst. the dismantled structures should not be throw n from height. all the dismantled structure to be kept at one place as directed by o.a.s representative for disposal by bsp , the job involves fabrication of st eel structures like column, platforms, w alkw ays, staircases etc. by type 1 electrode, as per approved draw ing / specification or as directed by oa/oa¿s representative complete in all respect including painting. fabricated structures w ill have to be erected by the contractor at height as per the direction of operating authority , the job involves w elding of tack w elded pipes, gland compensators, disc compensators, flanges, st eel structures, gas pipeline equipment, plates, pipes, structures w ith type 1 w elding electrodes , dismantling of gas pipe line or any other pipe line by cutting, including handling and stacking, cutting into pieces and sections as directed by oa/oa¿s representative & stacking at designated location. before cutting the nearby pipe lines/platforms/equipment to be supported. all dismantled structural items to be kept at a particular place, as show n by o.a.s representative for disposal by bsp , job involves erection of fabricated/available pipes at locations show n by o.a./o. a' s representative, including dia. 100mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves,compensators, saddle supports etc. also to be erected, as directed by o.a , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 100mm and up to dia. 200mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 200mm and up to dia. 500mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves, compensators, saddle supports etc.also to be erected, as directed

Central Government/Public Sector

CTN :44289707

06 Apr, 2026 NA

Bhadradri Kothagudem - Telangana

Tender For corrigendum : etc of boiler and its auxiliaries and material management at 1x800 mw singareni thermal power project mancherial india - package-a: erection, testing, commissioning, trial operation and handing over of boiler and its auxiliaries including pressure part, non-pressure parts, duct dampers and its support structure, rotating equipment’s, air pre-heaters, id/fd/pa fans, mills, refractory etc. along with application of lining, insulation, supply & final painting/ touch-up painting as applicable and wherever required as per painting schedule including handling of materials at bhel / client's stores / storage yard and transportation to site at 1x800 mw singareni thermal power project, mancherial, india package-b: receipt, unloading, verifying, shifting, stacking, preservation, handling and handing over of components of boiler with auxiliaries including mills & feeders etc.; esp with auxiliaries, steam turbine & auxiliaries; turbo-generator & auxiliaries; pumps with aux., rotating machines, tanks & vessels, electrical, controls and instrumentation equipment’s, panels, cables / cable trays, and other related items including items of boiler, tg & other packages; hp & lp piping; refractory & insulation with cladding materials; bhel t&p; components & equipment of various other systems, pre-fabricated structures, structural & reinforcement steel, cement, supply installation and maintenance of cctv camera and providing services for materials management at 1x800 mw singareni thermal power project, mancherial, india

Central Government And Public Sector

CTN :44714728

13 Apr, 2026 2.84 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : supply of irrigation material in dta area (block-41) of gift city - 1 1200008074: pvc pipe 110mm x 6kg: supply of pvc pipe of 110 mm dia working pressure 6kg/cm2 of supreme /finolex /jain or equivalent make including freight, loading and unloading etc. complete at specified site in gift city as per technical specifications and as directed by engineer-in-charge., 2 1200006097: supply of pvc pipe 90mm x 6kg: supply of pvc pipe of 90 mm dia (working pressure 6kg/cm2) of supreme /finolex /jain or equivalent including freight,loading and unloading etc. complete at specified site in gift city as per technical specifications and as directed by engineer-in-charge., 3 1200006094: supply of pvc pipe 63mm x 6kg: supply of pvc pipe of 63 mm dia (working pressure 6kg/cm2) supreme /finolex /jain or equivalent including freight, loading and unloading etc. complete at specified site in gift city as per technical specifications and as directed by engineer-in-charge., 4 1200008081: 90mm pvc bend: supply of 90mm pvc bend of working pressure 6kg/cm2. including freight,loading and unloading etc. complete at specified site in gift city as per technical specifications and as directed by engineer-in-charge., 5 1200007235: pvc reducer 90mmx63mm: "supply of pvc reducer 90mmx63mm of working pressure 6kg/cm2. including freight,loading and unloading etc.complete at specified site in gift city as per technical specifications and as directed by engineer-in-charge"., 6 1200007234: pvc tee of 90 mm: supply of 90mm dia pvc tee of working pressure 6kg/cm2. including freight,loading and unloading etc.complete at specified site in gift city as per technical specifications and as directed by engineer-in-charge., 7 1200007226: 90mm ball valve: "supply of double union pn-10 rating 90 mm pvc ball valve, make- astore/ plasson or equivalent including freight,loading and unloading etc. complete at specified site in gift city as per technical specifications and as directed by engineer-in-charge., 8 1200007237: pvc endcap of 90mm: supply of 90mm dia pvc endcap of working pressure 6kg/cm2.including freight,loading and unloading etc.complete at specified site in gift city as per technical specifications and as directed by engineer-in-charge., 9 1200006107: supply of pvc 63mm tee joiner: supply of 63 mm size, working pressure 6kg/cm2 pvc tee joiner including freight, loading and unloading etc. complete at specified site in gift city as per technical specifications and as directed by engineer-in-charge., 10 1200006101: supply of pvc 63mm elbow: supply of 63 mm size, working pressure 6kg/cm2 pvc elbow including freight, loading and unloading etc. including freight, loading and unloading etc. complete at specified site in gift city as per technical specifications and as directed by engineer-in-charge., 11 1200006098: supply of 63 mm ball valve: "supply of double union pn- 10 rating 63mm pvc ball valve, make- astore/ plasson or equivalent including freight, loading and unloading etc. complete at specified site in gift city as per technical specifications and as directed by engineer-in- charge., 12 1200006100: supply of 12"x17" valve box: "supply of valve box of 12'' x 17"" x 12.1"" size of rectangular shape with durable, weather proof body made of structural foam hdpe resin that is resistant to uv light, weather, moisture & chemical action of soils. make- rainbird or equivalent including freight, loading and unloading etc. complete at specified site in gift city as per technical specifications and as directed by engineer-in- charge., 13 1200006080: supply of 1/2 " upvc ball valve: supply of 1/2 " upvc ball valve of schedule 40 ,equivalent make, including freight,loading and unloading etc. complete at specified site in gift city as per technical specifications and as directed by engineer-in-charge., 14 1200006085: supply of 1/2 " upvc pipe: supply of 1/2"dia upvc pipe of schedule 40. including freight,loading and unloading etc. complete at specified site in gift

CTN :44687620

18 Apr, 2026 NA

Ernakulam - Kerala

Tender For supply of size 5ftx8ft d d - p4 outdoor led high impact digital display video wall of size 5 ft x 8 ft , mounting pole of ms thickenss , aluminium die cast cabinet for , controller with stand alone video playing format including lan usb wifi connectivity for program editing , fabricated structure for rain protection

Central Government/Public Sector

CTN :44688443

16 Apr, 2026 NA

Bokaro - Jharkhand

Tender For maintenance of raw material conveyors and structural repairs of coke track

Central Government/Public Sector

CTN :44687368

13 Apr, 2026 2.75 Crore

Cuddapah - Andhra Pradesh

Tender For tender for supply of earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m , as directed by engineer-in-charge. all kinds of soil , filling available excavated earth (excluding rock) in trenches , plinth , sides of foundations etc. in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering , lead up to 50 m and lift upto 1.5 m , complete as per directions of engineer-in-charge. , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1-3-6 (1 cement - 3 coarse sand (zone-iii) -6 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finishing and reinforcement - all work up to plinth level 1-1.5-3 (1 cement - 1.5 coarse sand (zone-iii)- 3 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , steel reinforcement for r.c.c. work including straightening , cutting , bending , placing in position and binding all complete above plinth level and below plinth level.thermo-mechanically treated bars of grade fe-500d or 550d , complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and lifta) in foundations , footings , bases of columns , etc.complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and liftb) in superstructure columns , lintels , beams , plinth beams , roofs etc. , complete as per directions of engineer-in-charge. , dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete , complete as per directions of engineer-in-charge. , supplying and filling in plinth with sand under floors , including watering , ramming , consolidating and dressing complete , complete as per directions of engineer-in-charge. , demolishing r.c.c. work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer - in- charge. , neat cement punning , providing and grouting of pockets with cementitious grout non shrink of approved make by suitable means free flowing pump curing etc complete as per directions of engineer in charge the payment shall be made on the basis of actual weight of approved grout used as per directions of engineer in charge , structural steel work riveted , bolted or welded in built up sections , and framed work like purlins , frames , trusses etc. including cutting , hoisting , fixing in position and applying two coats of synthetic enamel paint over a coat of approved steel primer , complete as per directions of engineer-in-charge.. , providing , laying and jointing glazed stoneware pipes of 150mm dia pipe of class sp1with stiff mixture of cement mortar in the proportion of 1ratio1 1 cement 1 fine sand including testing of joints etc complete as per directions of engineer in charge , constructing masonry chamber 120x120x100 cm inside , in brick work in cement mortar 1-4 (1 cement - 4 coarse sand) for sluice valve , with c.i. surface box 100 mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and rcc top slab 1-2-4 mix (1 cement - 2 coarse sand - 4 graded stone aggregate 20 mm nominal size) , ic necessary excavation , foundation concrete 1-5-10 (1 cement -5 fine sand - 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1-3 (1 cement - 3 coarse sand) 12 mm

Fabricated Structure Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector