Latest fabrication material Tenders | Government fabrication material Tenders

corporations/Associations/Others

CTN :45332552

16 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of wiring for light point fan point exhaust fan point call bell point with 1.5 sq.mm , earth wire , supplying and drawing following sizes of pvc conduit as required 1.5mm , modular plate , supplying and fixing two module stepped type electronic fan regulator on the existing modular plate , supplying and fixing modular blanking plate on the existing modular plate , supplying and fixing following size , 3 module 100mmx75mm , 4 module 125mmx75mm , 6 module 200mmx75mm , 8 module 125mmx125mm , 12 module 200mmx150mm , supplying and fixing suitable size gi box , 15x16 amps , a exhaust fan of all sizes. , modular plate and cover in front on surface or in recess , providing and fixing 25 a , mcb distribution board , single pole 6 to 32 amp , single pole and neutral 6 to 32 amp , single pole and neutral 63 amp , triple pole and neutral 32 amp. , 63 a tpn mcb 10 ka c curve , mcb db complete etc as required , 32 a 415 v c curve tp mcb , 600 mm x 600 mm x 6 mm thick watering pipe of 2.7 meter long etc. , providing and fixing 25 mm x 5 mm gi , providing and fixing 6 swg dia gi , led batten light 40 watt , ceiling fan 3 star rated with voltage range 90 v to 300 v 1200 mm , 300mmx12 inch sweep exhust fan , 50 w flood light 50 watt , sitc of building distribution panel indoor , 160 a 36ka fpmccb , aluminium bus bar 200 amp set of 4 strips 18 inch , digital metering devices , supplying and laying of following size dwc hdpe pipe isi marked along with all accessories , supplying and laying of one number pvc insulated and pvc sheathed , supply and making end termination with brass compression gland and aluminium lugs , 2.5 kva sine wave inverter input 1 phase 3 wire and output 1 phase 3 wire with 2 nos of 12 v 200 ah battery , hot dipped galvanised iron cable tray 100 mm width x 50 mm depth x 1.6 mm thickness ) /bid number : gem/2026/b/7584956 * /dated: 26-05-2026 & & / bid document 1 / 30

CTN :45296045

01 Jun, 2026 NA

Darjeeling - West Bengal

Tender For supply of wave solar invertor along with cables and fittings as required , solar battery 12 volts 200 ah gel based lithium based along with battery cabinet and cable , fd kero heater , drapery rods with brackets for curtain , nsss commodes as per technical specification , stainless steel grade 304 shower floor pan of size 1150 x 1030 mm , vitreous wash hand basin white 550 mm x 400 mm flat back , wash basin looking mirror 450 mm x 900 mm , ss soap dish , aluminium peg set of 6 , wash basin mixture cp for hot and cold water , bib tap long body cp 15mm bore , bib tap short body cp 15mm bore , stop cock cp 15 mm bore , ss jali 4 inch , pvc flushing cistern 10 litres capacity with pvc connections 600 mm long , 20 mm ppr pipes pn 16 for hot and cold water supply in all bathing area and washbasin along , 20 mm ppr pipes pn 16 for cold water supply in toilet area and urinals along with all connections , 25 mm ppr pipes pn 16 for hot and cold water supply in toilet block from water tank solar water heater along with all connections , pvc pipe 110 mm 6 mtr long , pvc socket tee elbow trap grating for water and waste drainage disposal , puf insulated water tank 500 ltr , water tank staging of size 3200 mm length x 1600 mm width x 6000 mm height , hdpe septic tank of 1000 ltrs , hdpe soak pit of 500 ltrs of reputed make , solar water heater of 500 ltrs capacity with additional steel frame of 5 feet high , lightening conductor complete set , earthing of complete set for building , led downlight or equivalent 9w with 270 degree light spread color cool white , led security light energy saving and environmentally friendly long life versatile pressure die cast aluminium ip 66 with high power led , polycarbonate 20 amp penta combined 2 hole modular box with switch socket , 20 amp heavy duty modular box with switch socket and single pole mcb enclosure , 4 module modular box with switch , 3 module modular box with switch , 2 module modular box with switch , mcb distribution box 12 way 240 volts double door complete with copper busbar , mcb 6 amp single pole 240 volts , mcb 20 amp single pole 240 volts , mcb 63 amp double pole 240 volts , pvc casing capping is conforming 25 mm , service cable 10 sqmm 2 core armoured aluminium , 1.5 sqmm multistrand copper cable single core frls in green colour for earth wire , 1.5 sqmm multistrand copper cable single core frls , 2.5 sqmm multistrand copper cable single core frls , isi marked tmt bar fe 550 grade 12 mm dia , isi marked tmt bar fe 550 grade 10 mm dia , isi marked tmt bar fe 550 grade 8 mm dia , binding wire 1 mm , plumb bob iron , picks axes with chisel and point ends kudali 14 cp nominal weight 3.0 kg overall length minimum 595mm with handle , vernier calliper digital type , screw gauge digital type , electrician tool kit , multipurpose non slip rubber reusable gloves , measuring fibre glass tape 5 mtr long , industrial safety helmet conforming to is-2925 of approved colour , showel square nose 14 gauge , galvanised iron pan mortar , rammer earth with handle , form work 12mm thk plywood 2400mmx1200mm , soft wood wooden fillets , nails 50mm long //bid details 2 / 56

CTN :45307467

03 Jun, 2026 45.05 Lacs

Baramulla - Jammu And Kashmir

Tender For supply of constr of fighting pd of size 2.4m x 2.4m , soakl pit size 1.0m x 1.0m , steel loop hole size 610 mm x 330 mm , prefabricated steel door size 900mm x1800mm , door window loop hole 50 x 50 x 6mm 1200mm length , mild steel angle 35x35x5mm with , steel roofing trough size 2000x613x180mm , steel roofing trough size 1630x613x180mm , ply wood 10 mm thick , steel beam ismb 150 rsj 150 x 75mm 4.6mtr long , bitumen for filling of expansion joint of pcc , quick setting compound , integral water proofing compound , pcc soild block size 400mm x 200 mm x 200 , pbs roll size 20m x 0.90m , hdpe sand bag of size 75x40 cm , oil bound distemper , synthetic enamel pain og , hdpe sheet 150 micron thick , interlocking tiles. 60mm thick pcc , aggregate 20mm , aggregate 40mm , aggregate 63mm , manufactured sand , common burnt clay building bricks 230x115x75mm , polyurethane thinner , cement base paint , hydrophobic poreblocking ingredients , 18w led tube and fitting 4ft , 09 w led bulb , 9 w interter bulb , pvc ceiling rose 2 3 terminal , pvc casing capping square box 4 inch x 4 inch , 6a one way single module flush type modular switch , 1 module concealed metal flush box , white cover plate with frame 1 module , 2 module concealed metal flush box , white cover plate with frame 2 module , cable pvc insulated unsheathed single core 1.5 sqm , flexible wire pvc insulated twin core twisted , 25mm x 16mm pvc casing capping profile , 25mm pvc casing capping l bend elbow , pvc casing capping t 25mm , pvc casing capping elbow 25mm , 20 mm ms drywall cross recessed screws , mcb double pole 230v ac 50 hz 6 amps 10 ka , self adhesive plasticized pvc insulation tape , 16a spn or dp main switches , mcb distribution boards in sheet metal , bricktrowe , drop forged high-grade carbon steel brick hamme , lightweight extruded aluminum alloy straight edge , plaster trowel , 16 inch 400mm diameter mortar pan tasla , high tenacity nylon monofilament line , cast iron plumb bobs , heavy duty metal hand rammers , heavy duty pickaxes , shovel square , single piece hot forged carbon steel powrah , high quality heavy duty flat painting brush , industrial rubber gloves , aluminium spirit levels 12inch , transparent flexible pvc water leveling tubes , cutting pliers , measuring tape 15 mtr , earthing electrode , gi pipe 100 mm dia med grade , back filled compound , ms earth pit cover of size 30 cm x 30 cm with handle , aluminium strip , iron spikes 16 inch long , gi strip of size 32 x 6mm, 3.00m long , gi nipple 20mm , gi reducer socket 40x20mm , lightning air terminal a copper tube 150 cm long x 25 mm dia , ms clamp 40x2mm with nut and bolt complete , gi wire 12 gauge , earth augur , upvc pipe 3m long 6 inch dia , user manual , tester set , gi pipe medium 40mm dia 6 mtr long , natural sand , gi pipe 40 mm bore 2m long , 50 mm bore gi pipes sleeve , crystaline condcutive mixture , fire extinguisher 2 kgs capacity

CTN :45275091

28 May, 2026 5.38 Lacs

Chandigarh - Chandigarh

Tender For providing & fixing of sanitary items and allied work in model jail sector- 51, u.t. chandigarh (fansi chakki, midday meal, music room) - excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : .2.10, all kinds of soil .2.10.1, pipes, cables etc, not exceeding 80 mm dia. .2.10.1.1, pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre .2.10.1.2, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : .4.1, 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.4, 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and size in : .6.4, cement mortar 1:6 (1 cement : 6 coarse sand .6.4.2, providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (size 300mm x 600mm) .8.31, providing and fixing aluminium sliding door bolts, isi marked anodised anodic coating not less than grade ac 10 as per is : 1868), transparent. .9.96, 250x16 mm .9.96.2, as per detail attached ., providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete .9.97, 200x10 mm .9.97.2, as per detail attached ., providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : .9.1, 125 mm .9.100.1, as per detail attached ., providing and fixing pressed steel door frames conforming to is: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including m.s. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by engineer-in-charge: .10.14, profile b .10.14.1, fixing with adjustable lugs with split end tail to each jamb .10.14.1.1, providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. .11.56, polished granite stone slab of all colour and texture exceptblack,

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

State Government

CTN :45304161

30 Jun, 2026 NA

Parganas - West Bengal

Tender For internal electrical installation and wiring of newly constructed administrative building including supply of all materials at barasat 220kv s/s under barasat area office, wbsetcl as per schedule - supplying and fixing double door vertical tpn 160a mcb distribution board (8way), for mccb incomer with ip-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. pwd sch page d-11 item no 15. (legrand make) , supplying and fixing 415 v 125 a (4p) four pole mccb of breaking capacity 25ka/35ka with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing dbs / enclosure and necessary connection. pwd sch page d-08 item no 10. (legrand make), , supplying and fixing 240/415 v sp mcb (6-32)a (for out going) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07. (legrand make), , single phase lighting distribution, , supplying and fixing double-door (2+12 way) spn mcb distribution board with ip-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. pwd sch page d-9 item no, , supplying and fixing 240/415 v 32a dp mcb (incommer) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07., , supplying and fixing 240/415 v (6-32)a sp mcb (out going) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07., , point wiring, , distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'fr' pvc insulated & unsheathed single core stranded copper wire (brand approved by eic) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with modular type switch (brand approved by eic) fixed on modular gl switch board with top cover plate flushed in wall incl. mending good damages to original finish. pwd sch page e-20 item no 1. (iii) (average run 8 mtrs), , point wiring on board, , distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'fr' pvc insulated & unsheathed single core stranded copper wire (brand approved by eic) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 v 6a 5 pin plug point incl. s&f 240 v 6a 3 pin modular type plug socket & modular type switch (brand approved by eic) incl. s&f earth continuity wire, fixed on 4 module gl switch board with 3/4 module top cover plate flushed in wall incl. mending good damages to original finish. pwd sch page e-20 item no 3(i), on, , concealed cutting channel, , cutting channel of 31 mm x 31 mm size on masonry wall incl. s&f heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 swg gi wire fish wire incl. mending good damages to building works. pwd sch page e-2 item no 2a. 13 mm dia 3 mm thick polythene pipe without earth, , cutting channel of 31 mm x 31 mm size on masonry wall incl. s&f heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 swg gi wire fish wire incl. mending good damages to building works. pwd sch page e-2 item no 2a. 13 mm dia 3 mm thick polythene pipe without earth, , distribution wiring, , 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (5 sqmm) as ecc, pwd sch page e-9 item no 1. make: kei/mescab/finolex, , 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ecc, pwd sch page e-9, , 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sgmm) as ecce) 4x126/0.4 (16 sqmm)+2x80/0.4 (10 sgmm) as ecc, pwd sch page e-9, , 4x80/0.4 (10sqmm) + 2x84/0.3 (6 sqmm) as ecc, pwd sch page e-9, , air conditioner, , supply & fixing 240 v, 25a modula

Central Government And Public Sector

CTN :45158607

25 May, 2026 NA

Dehradune - Uttarakhand

Tender For corrigendum : procurement of ict equipment along with supply and installation for establishment of state emergency operation centre (seoc) at usdma building, it park, dehradun. - procurement of it equipment for u-prepare(rates must be quoted incl. gst and applicable cms as per bid document), core network switches, supply installation testing commissioning of core switch as per technical specifications and corrigendum updates/clarifications, supply installation testing commissioning of sfp+ module for 10g, access network switches - (for poe & non- poe devices), supply, installation, testing & commissioning of access switch 48 port non- poe, as per technical specifications and corrigendum updates/clarifications, supply, installation, testing & commissioning of access switch 48 port poe+ as per technical specifications and corrigendum updates/clarifications, wireless networking, supply, installation, testing & commissioning of virtual wireless controller (software) as per technical specifications and corrigendum updates/clarifications, supply, installation, testing & commissioning of wireless indoor access point as per technical specifications and corrigendum updates/clarifications, supply, installation, testing & commissioning of wireless outdoor access point as per technical specifications and corrigendum updates/clarifications, wireless networking, ip telephony appliance based system (minimum 500 end-user lic support including ip phones, video phones and sip h.323 based video conferencing devices. hardware, software and voice gateways shall be from same oem for better interoperability), and will also include 1 pc based console for operator), supply, installation, testing & commissioning of helpdesk operator wired headsets, supply, installation, testing & commissioning of fusion room operator wireless hands-free headsets forsoftphone working, supply, installation, testing & commissioning of unified communication (uc) system with softphone support and250 user licenses, supply, installation, testing & commissioning of basic type-i sip phones features a color display, 3 context-sensitive soft keys, and fixed function/navigation buttons., supply, installation, testing & commissioning of vip (premium) sip telephone with 7-inch or larger color touch screen with a 2mp or 1080p hd camera, supporting one or more sip accounts and 3-way conferencing. features hard function keys for essential call controls and a secondary gigabit ethernet port for desktop/laptop connectivity, supply, installation, testing & commissioning of pc based console for operator, router, supply, installation, testing & commissioning of standalone / modular router, as per technical specifications and corrigendum updates/clarifications with 5 year support., firewall, supply, installation, testing & commissioning of utm firewall as per technical specifications and corrigendum updates/clarifications. shall have 32 gb or higher ram and 800 gb nvme ssd storage and wil provide 5 gbps firewall throughput, 3 gbps ipsec throughput, 5 gbps ips throughput or more and 5 gbps nextgen firewall throughput including firewall, dns security, supply, installation, testing & commissioning of dns security solution for minimum 150 users, active power factor filter (apff/ahf), supply, installation, testing & commissioning of active power factor filter with ct kit (150 a), ems, supply, installation, testing & commissioning of element management systems., nac, nac (appliance + 100 licenses) in ha, hci servers, supply installation testing commissioning of 4 hci nodes for dc across 1 clusters, supply installation testing commissioning of 4 hci nodes for dr across 1 clusters, microprocessor based transient voltage surge suppression (tvss) system with reset facility high/low voltage protection, supply, installation, testing & commissioning of microprocessor based transient voltage surge suppression (tvss) system with reset

Central Government And Public Sector

CTN :45090253

28 May, 2026 NA

Raipur - Chhattisgarh

Tender For expansion of divisional railway hospital raipur by construction of surgical icu, two modular ots, conference hall, 8 nos. executive wards with ramp, staircase & lift. (this work primarily includes a g+2 building of size 57.43m x 16.52m)

Central Government/Public Sector

CTN :45240511

12 Jun, 2026 NA

Samastipur - Bihar

Tender For construction of modular training center building for dtstc/spj.(phase-i)

CTN :45250330

26 May, 2026 33.0 Thousand

Kolkata - West Bengal

Tender For maintenance of electrical installation & fans i/c repair maintenance of pump sets, dg set, fire fighting, fire alarm system at central excise & customs (nacin) admn. building at ultadanga, kolkata during 2026-27 (sh: supply & fixing of led modular light & ac to dc converter and other allied works).

Fabrication Material Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector