Latest fabrication equipment Tenders | Government fabrication equipment Tenders

Corporations And Associations And Others

CTN :45585148

07 Jul, 2026 22.47 Crore

Jhansi - Uttar Pradesh

Tender For survey investigation and designing hydrographic hydraulic structural etc of construction of drain from lakshmi gate to stp plant to sudha vihar colony gate no 2 to highway in jhansi including supply of all material labour tand p etc

Central Government/Public Sector

CTN :45592840

24 Jun, 2026 NA

Bengaluru - Karnataka

Tender For auction sale of others - condemned, unserviceable, underaged x ray baggage inspection system xbis model rap-627xr sl no. 6171121. total qty: 1 by lot. (1) on as is where basis under the custody sr.dsc/rpf/sbc as declared vide ds-08 no. 2601-06 dt 11.04.26. (2) location: at rms building near sr.dsc/office, bengaluru karnataka (3) delivery on by lot basis only. (4) dismantling/cutting: permitted to lorry loadable size. (5) road approach- lead of 50 metres. (6) only recyclers/pre-processors registered with the central pollution control board (cpcb) or state pollution control board (kspcb) possessing a valid authorization certificate are eligible to participate/bid for the lot. (7) the weight composition is purely indicative and approximate. no claims or variations in financial value will be entertained regarding variations in the actual material composition proportions. (8) purchaser must arrange for safe dismantling without causing any structural damage to the railway building, flooring, or surrounding utilities. any damage caused will be recovered from the purchaser¿s security deposit. (9) witnessing officials must physically/digitally verify that the purchaser holds a valid, unexpired license for handling hazardous electrical/electronic and heavy metal waste (cpcb/kspcb guidelines). purchaser has to remove all components associated with the lot¿including the heavy structural frames, peripheral rollers, monitors, cpus, and specifically the insulating oils- leaving the site clean. the purchaser should not be allowed to cherry-pick high-value items (like copper or lead) and leave the low-value plastic or steel shell behind. (10) custodian: /0/sr.dsc/rpf/sbc (9448319344).

Central Government/Public Sector

CTN :45592841

24 Jun, 2026 NA

Bengaluru - Karnataka

Tender For auction sale of others - condemned, unserviceable, underaged x ray baggage inspection system xbis model rap-627xr sl no. 6171122 (entry/exit roller table, monitor, key board with table, lcd monitor, stabilizer) total qty: 1 by lot. (1) on as is where basis under the custody sr.dsc/rpf/sbc as declared vide ds-08 no. 2601-07 dt 11.04.26. (2) location: at platform no. 6 tk end ypr railway station, bengaluru karnataka (3) delivery on by lot basis only. (4) dismantling/cutting: permitted to lorry loadable size. (5) road approach- lead of 200 metres. (6) only recyclers/pre-processors registered with the central pollution control board (cpcb) or state pollution control board (kspcb) possessing a valid authorization certificate are eligible to participate/bid for the lot. (7) the weight composition is purely indicative and approximate. no claims or variations in financial value will be entertained regarding variations in the actual material composition proportions. (8) purchaser must arrange for safe dismantling without causing any structural damage to the railway building, flooring, or surrounding utilities. any damage caused will be recovered from the purchaser¿s security deposit. (9) witnessing officials must physically/digitally verify that the purchaser holds a valid, unexpired license for handling hazardous electrical/electronic and heavy metal waste (cpcb/kspcb guidelines). purchaser has to remove all components associated with the lot¿including the heavy structural frames, peripheral rollers, monitors, cpus, and specifically the insulating oils- leaving the site clean. the purchaser should not be allowed to cherry-pick high-value items (like copper or lead) and leave the low-value plastic or steel shell behind. (10) custodian: /o/sr.dsc/rpf/sbc (9448319344).

Central Government / Public Sector

CTN :45591757

29 Jun, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12232ms26c,98050175, quantity- 60.085 mts. scrap condemned unserviceable ms-gi-ci rusted,corroded,dusted mixed scrap of c and w,loco,p. way,signal interlocking material consisting of all type of sheets,boxes,ms high gauge,pipes,footsteps,rings,strips,filters,trusses,patch cut parts,gutters,drum clocks,distribution boards,u rack,boring rod,ms panel body,ms battery charger covers,hand cuffs,driver seat,hand cart,push trolley,packing strips,ms body of block instrument,ms boiler coil cut pieces,42 u rack ms body,ms collapsible gate,ms termination box,ms bathroom ventilator,ms body of data logger,ms heater coil,screen guard,nuts,bolts,lavatory doors,ms carriage doors,pins,rivets,links,rods,angle cut pieces,structural frames,brackets,drums,cocks,basins,wire meshes,wire ropes,water tank cut up parts,casings,corrugated sheets,filter top and bottom caps,clamps,washer plates,stands,frames,sheet cuts,plate cuts,joists,channels,bases,plates,flats cut pieces,vestibule frames,window,door,shutters,head stocks cut up parts,broken t and p items,racks,compensating rings,bindings,washers,dust bins,chains,berth strips,gate frames,iron furniture,motor bodies,screw rods,levers,flats,rod cut pieces,trolley wheels,gi ducts,glow sign boards,ms electrical scrap,building rods,packing strips,ms body of rru,air cooler empty bodies,cbf filter,corrugated sheets,drums,blower motor frames,ucb packing frames,under frame cut up parts,berth frames,supports,cylinder blower covers,valves,end shield covers,traction motor yokes,shafts,piston rings,gears,brake shoe heads,brake gear items,straps,cotters,springs,equalizing stays,fan hub,end shield,pinions,ms covers,signal arms,lc gate pipes,ladders,angles,signal booms,rounds,signal buckets,pulleys,fabricated posts,signal lamp structures,liners,screws,spikes,air brake cylinders,brake hangers,bss hangers,battery boxes,battery containers,junction and location boxes,sleepers cut pieces,axle counter empty box,dc-dp ips empty rack ,sge block instrument empty box ,reset counter box,gps clock ,42 v rack,transformer bay,ms chain pulley blocks,beam scale parts,idly cooker with steam generator body,wheel barrow,fry pan single burner,ms floor stand,ms sliders,ms body wet grinder,fry pan,jara,ms ips rack rifle safety chain,ms air pump,foot spray,antenna,spiral binding machine,ms man drill,trbc covers,hand cart push trolley,expresser fan guard,ms first aid box,hacksaw frame,tool box,tie bars,ci brake blocks,composite brake blocks,ci pulleys,buckets,ms gear wheels,gym equipment,roti maker,bicycle parts,axle box,bfr cut up parts,grills,mesh,gate wheels,girders cut pieces,collars,trolleys,foot plates,signal point rods and any other ms-gi-ci material present in the lot with or without attachments of nf,ss,rubber,nylon and plastic. ms pan mortars,wire claws,wire baskets,crow bars,jim crow,dip lorry,weld filling body,sleeper hooks,rail dollies,rail cutting frames,augers,pick axe,tongue for rails,spades,beaters,ballast rake,powrahs,rail cum road mono trolley,case tin,h.s.lamps,rail dolly clips,shovels,trolley wheels and similar gang man items of sorts and sizes,with or without attachments.fiber,glass,windows,frp glass windows,window frames of sorts and sizes,broken or unbroken,with or without attachments of nf window shutters. [aluminium - 2 percent] note- 1. nf material,axles,wheel discs,and rails or material not mentioned in the description,if found during the delivery are to be returned to railways. 2. track and track fittings running through this area are excluded. 3. nf and stainless-steel attachments are approximately 0.1 percent of the lot quantity. 4. gas cutting permitted to facilitate loading. location- bin no- 232, right side of road no- 2. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per motor vehicle act 1988.

CTN :45584909

30 Jun, 2026 45.00 Lacs

Jodhpur - Rajasthan

Tender For supply of various material and equipment at gram panchyat ps dhawa 2026-27 yearly rate contract - ghadla/kankar/jhajhra, mud mortar, quicklime (from kiln) for lime masonry work, cement, ppc, white cement, fine aggregate, sand/gravel, gravel – local, fly ash, surkhi (brick dust/powder), stone dust (for masonry work), stone/brick aggregate (for works other than road construction), 40mm stone aggregate (hand-broken grit) (deduct 1/11 for voids), 40mm stone aggregate (crusher-broken) (deduct 1/11 for voids), 20mm stone aggregate (crusher-broken), 12/10/6mm stone aggregate (crusher-broken), brick aggregate, materials for road work, 63-40mm hand-broken stone aggregate (deduct 1/11 for voids), 90-45mm hand-broken stone aggregate, quarry rubbish (deduct 1/6 for voids), gravel (deduct 1/6 for voids), kankar (deduct 1/11 for voids), binding material (pi 4-6) (deduct 1/6 for voids), brick (22.5 x 11 x 7.50 cm), first class, second class, soling / stone paving stone, random rubble (rr) masonry, coursed rubble (cr) masonry, stone soling (for flooring work up to 15 cm height), stone soling (for road/paving work, 23 cm height), jodhpur-type stone slab/strip/flagstone pieces (width 10-12", length 2-3', thickness 2.5-3.5"), stone slab/flake (flaky material) (3-4" thickness & length, 1-2" width) for soling, sandstone (dpc, sill, coping, lintel, shelf/tand, almirah, etc.), up to 25 mm thickness, 25-40 mm thickness, 40-50 mm thickness, 50-75 mm thickness, 75-100 mm thickness, 100-150 mm thickness, flagstone for flooring / slab paving, flagstone for flooring (up to 35 mm thick, min. 3 sq. ft. or more area) - jodhpur slab, flagstone for slab paving (60-75 mm thickness, min.) area of 3 sq. ft. or more (jodhpur chap), unpolished rough kota stone, up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, polished kota stone (single-side polished), up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, marble stone (makrana adanga, 20mm thick), up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, marble chips, marble powder, marble stone (rajnagar grade ii/local, 20mm thick), up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm, stone door frame, single rebate size 100 x 75 mm, double rebate size 125 x 75 mm stone slabs, up to 1.5 m length, minimum 40 mm thick, 1.5 m to 2.40 m length, minimum 50 mm thick, 2.4 m to 3.0 m length, minimum 65 mm thick, above 3.0 m length, minimum 75 mm thick, precast tiles / blocks, glazed: size 30x45 cm, mosaic: 40 mm thick, vitrified: size 60x60 cm, interlocking tiles/bricks/blocks for road work, cement interlocking block (m-30 grade), 60 mm thick, cement interlocking block (m-30 grade), 80 mm thick, cement interlocking block (m-30 grade), 100 mm thick, local wood with fittings (for doors, windows, and furniture), mango, mirandi/kapoor, babool, others: ghana teak, factory-made doors (30 mm thick, solid core, single leaf), structural steel, iron (tor steel fe 415/500 for reinforcement), binding wire (18 gauge), iron girders, angle iron/square bar/flat strip/angle iron, barbed wire (sizes: 12g wire & 12g strand / 12g wire & 14g strand / 14g), mesh/jali, iron mesh (24 gauge, 14 mesh), cement concrete jali (40 mm thick), glass, 3 mm thick glass, paints, enamel paint, distemper, lime - for whitewashing (aras / quicklime), primer, petroleum products, diesel (hsd), mobil oil (engine oil), bitumen/shalitex board, plain sheet sheets, gi sheet 22 gauge (0.80 mm), gi sheet 24 gauge (0.63 mm), ms sheet 22 gauge (0.80 mm), ms sheet 24 gauge (0.80 mm), corrugated sheet, gi sheet 1 mm thick, gi sheet 22 gauge (0.80 mm), asbestos cement sheet 6 mm (2.5/2.75 x 1 m), other sheets, pvc sheet 1 mm thick (colored/plain), green-yellow 'lite-roof expo' sheet (183 x 90), pipes, gi 15 mm diameter (b class), gi 20 mm diameter (b class), gi 25 mm diameter (b class), ac 75 mm diameter, ac 100 mm diameter, pvc 90 mm diameter (with ring), pvc 110 mm diameter (with ring), pvc 140 mm diameter (with ring), pvc 110 mm (2.5 kg/sq. cm

CTN :45497237

24 Jun, 2026 NA

Golaghat - Assam

Tender For corrigendum : engagement of agency for material handling and transportation to site of prefabricated structural steel for pfcc nrep group b at nrl assam

CTN :45570107

18 Jun, 2026 8.40 Lacs

Godda - Jharkhand

Tender For the objective of this assignment involves fabrication supply and installation of one naturally ventilated poly shade net house of size 20 meters 09 meters total area 180 sq.m. including civil foundation structural frame covering material.

CTN :45291856

18 Jun, 2026 19.00 Lacs

Bathinda - Punjab

Tender For bid to ras supply of supply of chdh structural items and all other specification as per rfp , supply of chdh building material and hardware material and all other specification as per rfp , supply of chdh electrical and earthing items and all other specification as per rfp , supply of chdh plumbing and sanitary items and all other specification as per rfp , supply of chdh lighting protection and furniture items and all other specification as per rfp , supply of chdh water storage tank and soakage wall items and all other specification as per rfp

CTN :45282006

18 Jun, 2026 23.00 Lacs

Bathinda - Punjab

Tender For bid to ras supply of ojls structural items and all other specification as per rfp , supply of ojls building material and hardware material and all other specification as per rfp , supply of ojls electrical and earthing items and all other specification as per rfp , supply of ojls plumbing and sanitary items and all other specification as per rfp , supply of ojls lighting protection and furniture and solar system items and all other specification as per rfp , supply of ojls water storage tank and soakage wall and septic tank items and all other specification as per rfp , supply of tools and plant and all other specification as per rfp

Central Government And Public Sector

CTN :45525671

13 Jul, 2026 38.80 Lacs

Mumbai - Maharashtra

Tender For renovation of supply air-conditioning system of k-4 and k5 with other accessories for rlg, barc, mumbai - design, fabrication, supply, installation, testing and commissioning of chilled water base double skin 10000 cfm ahu (without blower) as per clause no. 01 of technical specification., supply, fabrication and installation of ms supporting structures as per clause no. 02 of technical specification., design, supply, fabrication and installation of galvanized steel sheet for discharge air ducts as per clause no. 03 of technical specification., supply and installation of magnehelic gauge pressure range 0 to 25 mm wc including fittings as per clause no. 04 of technical specification., supply and installation of pressure gauges (0 to 7 kg/cm2 range) including fittings and ss ball valve as per clause no. 05 of technical specification., supply and installation of bar stock type ss thermowell with temperature guage as per clause no. 06 of technical specification., supply, fabrication, welding, installation, testing & commissioning of 80 mm nb schedule 40 carbon seamless steel pipe line including fittings as per clause no. 07 of technical specification., supply, fabrication, welding, installation, testing & commissioning of 100 mm nb schedule 40 carbon seamless steel pipe line including fittings as per clause no. 07 of technical specification., supply, fabrication, welding, installation, testing & commissioning of 125 mm nb schedule 40 carbon seamless steel pipe line including fittings as per clause no. 07 of technical specification., supply, installation, testing & commissioning of 50 mm size cpvc pipe with fittings as per clause no. 08 of technical specification., supply, installation, testing and commissioning of 100 nb mm dia flange ended gate valve ( ci body and gun metal internal)with suitable fittings and counter flanges for pipelines as per clause no. 09 of technical specification., supply, installation, testing and commissioning of 80 nb mm dia flange ended gun metal gate valve with suitable fittings and counter flanges for pipelines as per clause no. 9 of technical specification., supply, installation, testing and commissioning of 80 nb mm dia globe valve with suitable fittings and counter flanges for pipelines as per clause no. 10 of technical specification., supply and installation of all-around cold insulation saddles for chilled water pipeline along with fixing fittings as per clause no. 11 of technical specification., supply and installation of aluminium construction powder coated air diffuser along with volume control damper as per the clause no. 12 of the technical specification., supply and installation of 38 mm thickness close rubber cell cold insulation of classo fire rating followed by aluminium clading as per clause no. 13 of technical specification., supply, fabrication, installation and commissioning of the ss structural material including ss hardware. as per clause no 14 of technical specification., fabrication, supply and installation of ss construction multilouvered volume control dampers (vcd) along with electricaly operated modulating type actuator as per clause no. 15 of the technical specification., supply, fabrication and installation of plenum connection to existing blower as per clause no 16 of the technical specification., dismantling, segregation, removing & shifting of various equipment like ahu, insulated pipes along with supports, fittings, valves etc. as per the clause no. 17 of the technical specification.

Fabrication Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government And Public Sector