Latest fabrication job work Tenders | Government fabrication job work Tenders

corporations/Associations/Others

CTN :45559032

23 Jun, 2026 70.53 Lacs

Kanpur - Uttar Pradesh

Tender For work of drain elevation and casting of rcc slab between bhubaneswar dham to new speed coaching and om chauraha to jai bhagwan guest house under zone 06 ward 30 ambedkar nagar.

Central Government/Public Sector

CTN :45291308

30 Jun, 2026 NA

Nashik - Maharashtra

Tender For corrigendum : tender for supply of investing casting of holder (defence) -osaero job work for manufacturing of 38 parts reference semfg 1000 -01f.1b.0950.019.1ab , 01f.1b.0950.019.2ab , 01f.1b.100m.139.0a0 , 01f.1b.100a.053.0aa , 01f.1b.100a.054.0aa , 01f.1b.101m.003.1a0 , 01f.1b.101m.003.2a0 , 01f.1b.101m.034.0a0 , 01f.1b.101m.035.0a0 , 01f.1b.101m.053.1a0 , 01f.1b.101m.053.2a0 , 01f.1b.101m.155.0a0 , 01f.1b.101m.004.1aa , 01f.1b.101m.004.2aa , 01f.1b.204m.013.0a0 , 01f.1b.475m.001.0aa , 01f.1b.495m.001.0a0 , 01f.1b.964m.004.0a0 , 01f.1c.112m.199.0ab , 01f.1c.113m.004.1aa , 01f.1c.113m.004.2aa , 01f.1c.120m.028.1a0 , 01f.1c.120m.028.2a0 , 01f.1c.120m.029.0a0 , 01f.1c.221m.026.0a0 , 01f.1c.222m.030.1a0 , 01f.1c.222m.030.2a0 , 01f.1c.222m.029.1aa , 01f.1c.222m.029.2aa , 01f.1c.223m.041.0a0 , 01f.1b.952m.003.1ab , 01f.1b.952m.003.2ab , 01f.1c.120m.030.1aa , 01f.1c.120m.030.2aa , 01f.1c.131m.005.1ac , 01f.1c.131m.005.2ac , 01f.1c.228m.006.1aa , 01f.1c.228m.006.2aa

Central Government And Public Sector

CTN :45552730

15 Jun, 2026 30.22 Lacs

Begusarai - Bihar

Tender For name of the scheme:-pcc casting and drain construction work from gupta ji house to the main road of telia pokhar in ward no. 21.

Central Government/Public Sector

CTN :45505707

01 Jul, 2026 NA

Nashik - Maharashtra

Tender For tender for supply of job work for manufacturing of 15 part reference semfg1079 - investing casting of holder (defence) tip trailing edge block , tip trailing edge block , trailing edge block sta 1-7 , trailing edge block sta 1-7 , trailing edge block i -b , trailing edge block - lh , trailing edge block - lh , trailing edge block o -b -rh , trailing edge block , trailing edge block , trailing edge block , trailing edge block 1 , trailing edge block 2 , trailing edge block 3 , trailing edge block trim tab

Central Government/Public Sector

CTN :45551224

03 Jul, 2026 NA

Villupuram - Tamil Nadu

Tender For dn/mas acting for and on behalf of the president of india invites e-tenders against tender no m-sg-2026-515-ms_vm-2 closing date/time 03/07/2026 15:00 hrs. bidders will be able to submit their original/revised bidsupto closing date and time only. manual o ers are not allowed against this tender, and any such manual o er receivedshall be ignored.1. nit headername of worksignalling and telecom portion of work in connection withengineering works in chennai beach(msb)-villupuram(vm)section overchennai division.(msb-vm-2026-2)bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime03/07/2026 15:00date time of uploadingtender09/06/2026 16:19pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 14550242.18tendering section signalbidding style[ decision at schedulelevel ]bidding unitearnest money (rs.) 291000.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 12 monthscontract type works - general contract category expenditurebidding start date 19/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a-sor 2022 items9145422.44above/below/par1please see item breakup for details. 9145422.44 at par9145422.44description:- sor 2022 itemss.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () b-non sor items5404819.7411 3900.00numbers 100.00 390000.00 at par 390000.00 rs.description:- provision of 7.2 mm holes in old/new rails to provide continuity bonding /polaritybonding etc (all other material required for the work shall be supplied by contractor) (this scheduleincludes the xing of bond wire in the 7.2 mm hole). the bond wire and channel bond pins will besupplied by railways)22606.00numbers 670.00 406020.00 at par 406020.00 rs.description:- releasing and re xing of tld boxes in dc track circuits. (this work includes releasingthe existing track connections and reconnecting the track connections after the completion of workalong with provision of necessary holes for connecting lead wires and painting of track particulars.all the materials required for the above work shall be supplied by the contractor as per the directionof the rly engineer at site.3360.00numbers7400.00 444000.00 at par 444000.00 rs.description:- re xing of released point m/c (all types) and its gound connections (existing pointmachine) including wiring and termination in point m/c and interconnections between point m/c andct box through pvc hose pipe and painting (all types of insulations connected to point work , alltypes of bolts and nuts, washer springs/ at , pvc hose pipe, 3/0.75 sq.mm copper wire,7/1.4 sq.mmcopper wire, paints and other miscellaneous items shall be supplied by the contractor). the workshall be carried out as per the instruction of engineer at site.4110.00numbers3600.00 396000.00 at par 396000.00 rs.page 1 of 16run date/time: 09/06/2026 16:19:30chennai division-s and t/southern rlytender documenttender no: m-sg-2026-515-ms_vm-2closing date/time: 03/07/2026 15:004description:- releasing and re xing of cable termination box for point machine (existing pt ctbox)- this work involves breaking of concrete andreleasing the existing cabletermination box andkeep it a side casting of foundation and erection of the released ctbox and carrying out the interconnection between point machine and ct box. the work shall be carried out as per the instrution ofengineer at site.55141.00numbers3771.78 531820.98 at par 531820.98 rs.description:- all type point machine ground connections to be released carefully withoutdamaging, kept aside and re- x the same after completion of engineering work. the work shall becarried out as per the instruction of engineer at site.66 8000.00numbers 5.70 45600.00 at par 45

Central Government / Public Sector

CTN :45388425

18 Jun, 2026 NA

Jagatsinghapur - Odisha

Tender For corrigendum : supply of flowserve make control valve spares c c - assy, sliding seal, actuator, size 100/200, rotary, 4 stroke, backup ring, 15.50 od, dash #459, bearing, 1.25 stem, vldsk2, 2.50 l, metal, bearing, thrust, maxflo 4/3, 1"/1.50"/2", cl 150/600, bearing, thrust, maxflo 4/3, 3"/4", cl 150/600, bearing, shaft, maxflo 4/3, 1.50/2", cl 150/600, bearing, post, abd, 1.02 stem, maxflo 4/3, 3"/4", bearing, post, abd, maxflo 4/3, 1.50/2", cl 150/600, bearing, shaft, 1.18 stem, maxflo 4/3a, 3/4", dwgrev: 00; bearing, 0.75 stem, vldsk2, 1.63 l,, disk, vldsk2, 4", cl 150/300, disk, vldsk2, 10", cl 150/300, dwgrev: 00;kit, spare part, actuator, size 50, dwgrev: 00; kit, spare part, actuator, size 50, dwgrev: 00;kit, spare part, actuator, size 25, rotary, end post, maxflo 4/3a, 1.50/2", cl 150/600, 2 piece, press fit, 2 bolt, eco 16239, eco 16523, 18883, post assy, p, end post, maxflo 4/3a, 3/4", cl 150/600, 2 piece, press fit,, gasket, elastomer, 2.12 x 1.50, 0.06 thick, gasket, ptfe, 1.55 x 1.14, 0.12 thick, gasket, spiral, 11.12 x 10.38, 0.18 thick, gasket, spiral, 12.00 x 11.25, 0.18 thick, gasket, maxflo 4/3, 37mm x 27mm, 3.50mm thick, gasket, maxflo 4/3, 57mm x 45mm, 3.50mm thick, gasket, maxflo 4/3, 24mm x 18mm, 3.50mm thick, graphite, gasket, maxflo 4/3, 40mm x 30mm, 3.50mm thick, gasket, ptfe, 5.94 od, 5.38 id, .15 thick, gasket, ptfe, 5.345 od, 4.905 id, 0.094 thick, kit, shim, maxflo 3, 2", 150/300, kit, shim, maxflo 3, 3", 150/300, o-ring, dash #024, eco 15655, rubber, buna-n, o-ring, dash #459, eco 15655, rubber, buna-n, o-ring, dash #914, 1.28 dia, 0.12 wall, o-ring, dash #275, o-ring,, dash #159, packing set, twin, sureguard, packing set, twin, square, 1.25 stem, 1.75 od, vldsk2, packing set, single, sureguard xt, maxflo, 3"/4", packing set, twin, sureguard xt, maxflo, 1.50/2", plastic, pin, 3 deg taper, vldsk2, 4", cl 150/300, pin, taper, vldsk2, 10", cl 150/300, plug, maxflo 3, 2", cl 150/300, plug, maxflo 4/3, 3", cl 150/600, seal, grafoil, ribbon, 40" l, seat ret, maxflo 3, 2", cl 150/300, seat ret, maxflo 3, 3", cl 150/300, seat ret, vldsk2, 4", cl 150/300, seat ret, vldsk2, 10", cl 150/300, seat ring, maxflo 3, 2", cl 150/300, seat ring, maxflo 3, 3", cl 150/300, seat ring, maxflo 3, 3", cl 150/300, seat ring, vldsk2, 4", cl 150/300, seat ring, vldsk2, 10", cl 150/300, shaft, maxflo 4/3, 1.50/2", cl 150/600, shaft, maxflo 4/3, 3"/4", cl 150/600, shaft, vldsk2, extd, 4", cl 150/300, shaft, vldsk2, 10", cl 300, flowserve/logix 500 md+(520md+37-w1d300-000-0000), 3200md-28-d6-e-04-40-05-00, valtek lin.act., 25 sq.in with logix500 (actuator set), bare vlv sub asmbly 2",300w, maxflo 3, bare vlv sub asmbly 3",300w, maxflo 3, bare vlv sub asmbly 1.5" 300#, maxflo 3, bare vlv asmbly,p/n:817774.009,flowserve, bgl sphtm;dwgrev: 00;kit, spare part, actuator, size 50, rotary, hd spring, 3.25 stroke, mtl code n/a: se, dwgrev 000-ring, dash #237, rubber, viton a, 75/-5 durometer, indefinite shelf life purchase an, dwgrev 00bearing, thrust, 1.00 stem, shrstrm, 6/8, a or sa-479-521800, nitronic 60 bar 8-inch centerless gro, dwgrev 000-ring, dash #257, rubber, viton a, 75/-5 durometer, indefinite shelf life purchase an, dwgrev 01seat ring, shrstrm, 6, cl 150/600, inconel 625, work hardened to minimum tensile strength of 195 k, bgl me_fgdwgrev 04bearing, 1.12 stem, shrstrm, 2.00 l, metal, stellite #6 casting r30006 or wrought stellit, dwgrev 01pin, grooved, 0.19 dia, 0.50 l, a or sa-479-520910 xm-19 nitronic 50 strain hardened, up to 2.25 dia, dwgrev 000-ring, ...., dash #244, rubber, viton a, 75/- 5 durometer, indefinite shelf life purchase an, dwgrev 01seat ring, shrstrm, 3, cl 150/300, inconel 625, work hardened to minimum tensile strength of 195 k, ;dwgrev: 00; kit, spare part, actuator, size 200, rotary, 4 stroke, vr, mti code n/a: see drawing, p.o., or bo, dwgrev 00gasket, spiral, 1.44 x 1.06, 0.12 thick, gasket, spiral wound 316l windings, flexible graphite filler in, dwgrev 000-ring, .., dash #033, rubber, viton a, 75

Central Government And Public Sector

CTN :45456817

06 Jun, 2026 NA

Patna - Bihar

Tender For corrigendum : drain cleaning, drain repair, slab casting for existing drain& chamber, filling of brick bats, local sand, gsb etc. in water logged area in rainy season or as required, dewatering of water logged/ low land area, repairing and patch work of existing road & pavement and other miscellaneous work in all wards of nagar parishad, masaurhi, patna one years

State Government

CTN :45480615

23 Jun, 2026 7.56 Lacs

Bhopal - Madhya Pradesh

Tender For casting, machining, assembly and providing work of ww90 (for 63mm dia nut) single head stocks for gates of various w.r. divisions.

CTN :45463220

22 Jun, 2026 NA

Bazpur - Uttarakhand

Tender For supply and work of gm casting - g.m. bearing for top roller (upper half) for w.i.l. as per drawing. 88: 10 : 2 isi/iso standard, g.m. bearing for top roller (lower half) for w.i.l. mill as per drawing. 88: 10 : 2 isi/iso standard, g.m. bearing of t.r.p.f. roller net 88: 10 : 2 isi/iso standard, g.m. bearing of b.m.a. mill for top roller (upper half)as per drawing. isi/iso standard, g.m. bearing for side roller for w.i.l. mill as per drawing. isi/iso standard, g.m. bearing for side roller for b.m.a. mill as per drawing. isi/iso standard, g.m. bearing for b.m.a. mill for top roller (lower half) as per drawing. isi/iso standard, g.m. bearing for transmission gear wil mill. isi/iso standard, g.m. bearing for transmission gear bma mill. isi/iso standard

State Government

CTN :45231232

11 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply and execution items for reliability improvement of signalling inst. section of sr. dste/1/lko of lucknow div. nr. - excavating and refilling of trench to the level of ground with rammed earth asper drg. no.(nr/s&t/con/1.1/97a) so as not to form a drain 0.3 mtrs wide & 1mtr deep on both side of the station along side the track. it shall confirm to the safe distance as per signalling and cable plan in all type of soil, it also includes clearence of roots of trees and bushes., excavating and refilling of trench 0.3 mtrs wide & 0.8 mtr deep on pitced/stone/bricks paved surface, road/crossing/platform etc. and restoration of surafce to original condition., laying of signalling/telecom/power cables of different sizes as per attached guidelines (drg. no.(nr/s&t/con/1.1/97a) or latest on signalling cable laying and as per cable route plan approved by railways through trenches, rcc pipe, dwc pipe, gi pipe etc and meggering of cable before and after its laying of all type of outdoor cables. contractor have to transport cable from any store of lko division to site carefully. meggering to be done for each drum separately. meggering sheets to be supplied and filled up by contractor and submitted to railways, as per instructions by consignee., supply and laying of 2nd class bricks in the trench and laying as per drg. no. (nr/s&t/con./1.1/97a) or latest and as per instruction of the site engineer., boring and trenchless cabling along with supply and insertion of hdpe/dwc self lubricated pipes as per rdso spec no. rdso/spn/204/2011 ver 1.1 or latest of 120mm nominal dia in the bore at the depth of 1.4 meter to 2.1 meter from formation level (level of earth below ballast) as per drawing and as directed by engineer incharge by trenchless technology for laying of signalling /telecom/power cable under track /culvert etc. cable laying covered separately. inspection-consignee for supply of dwc/hdpe pipe. the following required coupling arrangement should also be supplied: 1. suitable snap fit couplers withrubber o ring, 2. spacers, 3. tees. 4. bend. 5. end cap(1 no. =6mtr ,straigh tpipe). (a) the cost shall include horizontal boring through any intermediate obstruction, either natural or man made or any boundary etc. (b) the rate is inclusive of all the materials equipment and labour required for during trenchless horizontal boring under the railway track. nothing extra shall be admissible on any account than the rate quoted above. (c) the pipeis to be laid underrailway track/road /culvert. all necessary arrangement are to be provideand all precautions are to be end is not deviated from the horizontal level line by more than 250mm in horizontal and vertical direction. (d) the rate shall be inclusive of direction and protection of underground utilities encountered during boring. (e) the payment for boring shall be made only when dwc/hdpe pipe are laid in the bore., concreting unschduled items in concrete of 1:3:6 ratio in cement, coarse sand and aggregate 25mm at different places in the yard and plastering top in fine plaster of 1:4 cement sand ratio. it also includes the excavation of earth as required at site and as per instruction of site incharge. the volume in cubic metres shall include the volume occupied by any ci foundation, trestle, ms angle or flat or gi pipe required to be embedded in the casting. cement coarse sand and aggregate 25mm are to be supplied by the contractor., earth work for excavation and refilling around location boxes and signals etc. where necessary including 50m lead and 1.5m lift. the lead is to be measured from centre of gravity of location to the centre of filling and lift from main ground level. the earth work should be well rammed including breaking of clods, levelling and dressing etc. as per instruction of engineer at site., brick work with well burnt bricks in foundations and plinths with cement and sand (ordinary) mixture of 1:4 ratio. all material is to be supplied by th

Fabrication Job Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors