Latest fabrication machine Tenders | Government fabrication machine Tenders

CTN :40522113

16 Jul, 2025 NA

Nagpur - Maharashtra

Tender For corrigendum : design, development & supply of automated welding fixture with robotic arm for material deposition b

Central Government/Public Sector

CTN :40469292

24 Jul, 2025 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of 39 types of special tools - drift , mandrel , clamp , fixture , plate , fixture , fixture , clamp , fixture , set of mandrel , feeler , jar , fixture , fixture , technological pin , fixture , fixture , fixture , thrust ring for welding of screen , fixture , fixture , fixture , fixture , fixture , fixture , fixture , fixture , fix , ture , fixture , feeler gauge , device , fixture for measurement of ak max , fixture , fixture , fixture , adaptor , ring , support , die

CTN :40932744

04 Aug, 2025 NA

Budge Budge - West Bengal

Tender For design, supply, erection and commissioning of final welding fixture and manipulator of (a) air spring suspension (asr) fiat bogie frame break beam assembly and (b) bogie side frame assembly as p er specification enclosed. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40932917

10 Jul, 2025 NA

Kanakapura - Karnataka

Tender For supply of end wall assembly for lhb gs & scn (amrit bharat ) coaches note:-(1)in dra wings "mig welding (131) is to be read as tig welding (141)" as per design letter no. md4 6231 dated 16.03.2024. (2)firm shall collect all latest/final drawings before manufactu ring. there may be minor modification in design., as per drawing: 75415001 alt. 'br1', packing instruction: 1. the supplier shall pack the end wall in a suitably designed returnable fixt ure in such a way that end wall shall not get scratched, damaged, twisted during tra nsportation, storage and lifting and to avoid scratches on outer surface. it should b e seperated by suitable environment friendly blocks to avaoid rubbing of two endwall surfaces . it should have standard clamping /fastening mechanism so that it can be ope ned easily. it should have firm's identification mark. 2. first returanable fixture along with end wall be retained by rcf & this fixture shall be exchanged in the second lot su pply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated havi ng sufficient strenght to bear approximate 2 tonne load in static & moving condition o f two coach sets of end wall. 4. the fixture /frame/pallet should be designed so that t he packed end wall preferably remain in vertical position to minimize surface area. 5. it should also be suitable for storage of end wallunder open sky. [ warranty period: 30 m onths after the date of delivery ]

CTN :40491703

09 Jul, 2025 NA

North 24 Paragana - West Bengal

Tender For corrigendum : supply of 1no. spot welding equipment with standard accessories and fixture for sub - assy. of "selector assembly" (drawing no. 6145-1.c81-???/?2) with following parts. (1) selector-drg no. 6045-1.1-26/e2 1.0 (2) washer -drg no. 6145-1.1-35/e2 to be spot welded with "selector" as per "selector with washer" drawing no. 6145-1.?61-4??/?2 ??mponent of ak-203 rifle. 3) after spot welding of washer with selector broaching operation to be performed as per designation of document ??? 038.?? ?4.13 and operation number 30.015.

Central Government / Public Sector

CTN :40866703

14 Jul, 2025 NA

Sambalpur - Odisha

Tender For supply, installation and commissioning of manipulator for casnub bogie consists of :- (i) 2 ax is manipulator suitable to hold and positioning of casnub bogie with attached parts during overhauling sta ge rectification work including dismantling and welding. (ii) manipulator design shall be with 3500kgs payl oad capacity considering safety factor. (iii) manipulator with electric drives for vertical and rotational axis. (with suitable reduction geared motors). equipped with brake motors. (iv) contactor based control system with isolation switch and emergency buttons on both vertical columns will provide separate pendant with all control buttons for ease in operating and manually inching type operation to achieve desired welding po sition. (v) cradle type synchronization - one side drive end and second side work as driven end. (syncronis ed mechanically and electrically). (vi) manipulator construction will be in steel plates, up/down movement with screw and box nut mechanism and rotation with slewing ring supported with guide rollers. proper h olding and clamping fixture for bogie. scope of supply and detailed spec is attached . firm 's offer : own m ake ade. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40837477

29 Jul, 2025 NA

Kanakapura - Karnataka

Tender For end wall assembly note:-in drawings " mig welding (131) is read as tig weldi ng (141) " as per design letter no. md46231 dated 16.03.2024 , as per drawing: lp15112 alt. ' h' & mdts21332 rev-00 dated 09.06.2020 ,fitted alongwith shutter complete to drg.no. 2 10113.0.76.300.012 alt'-r1', packing instruction: 1. the supplier shall pack the end wall in a s uitably designed returnable fixture in such a way that end wall shall not get scratch ed, damaged, twisted during transportation, storage and lifting and to avoid scratch es on outer surface. it should be wrapped with enviroment friendly material and it sho uld have standard clamping /fastening mechanism so that it can be opened easily. it sh ould have firm's identification mark. 2. first returanable fixture along with end wall b e retained by rcf & this fixture shall be exchanged in the second lot supply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixt ure from rcf. 3. the packing fixture/frame to be fabricated having sufficient strenght to bear approximate 2 tonne load in static & moving condition of two coach sets of en d wall. 4. the fixture /frame/pallet should be designed so that the packed end wall pre ferably remain in vertical position to minimize surface area. 5. it should also be suitabl e for storage of end wallunder open sky. [ warranty period: 30 months after the date of deli very ]

Central Government/Public Sector

CTN :40738095

03 Jul, 2025 NA

Kanakapura - Karnataka

Tender For supply of end wall assembly for lhb gs & scn (amrit bharat ) coaches note:-(1)in dra wings "mig welding (131) is to be read as tig welding (141)" as per design letter no. md4 6231 dated 16.03.2024. (2)firm shall collect all latest/final drawings before manufactu ring. there may be minor modification in design., as per drawing: 75415001 alt. 'br1', packing instruction: 1. the supplier shall pack the end wall in a suitably designed returnable fixt ure in such a way that end wall shall not get scratched, damaged, twisted during tra nsportation, storage and lifting and to avoid scratches on outer surface. it should b e seperated by suitable environment friendly blocks to avaoid rubbing of two endwall surfaces . it should have standard clamping /fastening mechanism so that it can be ope ned easily. it should have firm's identification mark. 2. first returanable fixture along with end wall be retained by rcf & this fixture shall be exchanged in the second lot su pply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated havi ng sufficient strenght to bear approximate 2 tonne load in static & moving condition o f two coach sets of end wall. 4. the fixture /frame/pallet should be designed so that t he packed end wall preferably remain in vertical position to minimize surface area. 5. it should also be suitable for storage of end wallunder open sky. [ warranty period: 30 m onths after the date of delivery ]

Central Government/Public Sector

CTN :40803707

03 Jul, 2025 NA

Kanakapura - Karnataka

Tender For supply of end wall assembly for lhb gs & scn (amrit bharat ) coaches note:-(1)in dra wings "mig welding (131) is to be read as tig welding (141)" as per design letter no. md4 6231 dated 16.03.2024. (2)firm shall collect all latest/final drawings before manufactu ring. there may be minor modification in design., as per drawing: 75415001 alt. 'br1', packing instruction: 1. the supplier shall pack the end wall in a suitably designed returnable fixt ure in such a way that end wall shall not get scratched, damaged, twisted during tra nsportation, storage and lifting and to avoid scratches on outer surface. it should b e seperated by suitable environment friendly blocks to avaoid rubbing of two endwall surfaces . it should have standard clamping /fastening mechanism so that it can be ope ned easily. it should have firm's identification mark. 2. first returanable fixture along with end wall be retained by rcf & this fixture shall be exchanged in the second lot su pply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated havi ng sufficient strenght to bear approximate 2 tonne load in static & moving condition o f two coach sets of end wall. 4. the fixture /frame/pallet should be designed so that t he packed end wall preferably remain in vertical position to minimize surface area. 5. it should also be suitable for storage of end wallunder open sky. [ warranty period: 30 m onths after the date of delivery ]

CTN :40752446

09 Jul, 2025 NA

Tiruvallur - Tamil Nadu

Tender For supply of stopper for pneumatic test for air tightness as per adk 7871 6683 hvf 8800 01532 , leak test fixture as per adk 7871 6682 cb hvf8800 01533 , fixture for assembly and welding of sheets to fan partition as per adk 0863 460 hvf 8800 01534

Fabrication Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector