Latest fabrication material Tenders | Government fabrication material Tenders

Central Government/Public Sector

CTN :40505258

06 Jun, 2025 NA

Delhi - Delhi

Tender For providing, fabrication & fixing of false ceiling & other related scope in transmitter hall & other technical area including dismantling material of existing technical area at dd site leh (ladakh-ut).

Central Government/Public Sector

CTN :40511976

12 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For supply of ladder trolley complete set generally confirming to rdso specification no. tm/sm/465 dated 03.02.2014 (rev 01 of2020) enclosed with following minor deviations. 1. each trolley set comprises of (1) wheel and axle 2 nos. (2) detachable frame- 1 no. and foldable ms ladder-1 no. 2. the wheel and axle set , frame for the trolley and the ladder for the trolley shall be as per the drawing enclosed. 3.the materials especially steel used for fabrication of wheel and axle should confirm to relevant standards wherever appli cable. only isi marked, branded ms pipe should be used for fabrication of ladder. the finished ladder shoul d be given one coat of anti-corrosive painting 4.seating arrangements, any arrangement for tool box are no t required in the trolley though mentioned in the rdso specification. 5. where there is any minor deviation in the dimensions between the drawing and the rdso specification is noticed if any, the dimensions in the enclosed drawing shall be adopted. 6. suitable insulating pad or similar insulating material should be provi ded in the axle such that the two wheels of the axle are not electrically shorted. 7. inspection will be carried out by consignee either at firm's premises or after receipt of the material. tenderers shall specifically note that the trolley requires to be field tested and any minor alterations/modification required for the same sho uld be carried out at the field by firms representatives in co-ordination with consignees after effecting the s upply. encl: 1. rdso specification no.tm/sm/465dt.03.02.2014 (rev 01 of 2020) 2. drawing no. m/trd/sk/ 589. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40514485

03 Jun, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For fabrication, painting and supply of vendt pipes for adani project with bhel material

Central Government/Public Sector

CTN :40503147

07 Jun, 2025 NA

Trichy - Tamil Nadu

Tender For fabrication and supply of various products with bhel material (osb) osb annual rc ii 2025-26

State Government

CTN :40030242

05 Jun, 2025 NA

Fazilka - Punjab

Tender For corrigendum : fabrication and fitting of tower members from scrap material (cutting, drilling, member fitting by nut-bolts tightening and blunting of threads of bolts and welding of nut-bolts) for completion of missing members of 66kv lines falling under ae/tl s/d, fazilka under the office of o&m division, fazilka. tender document

corporations/Associations/Others

CTN :40501620

06 Jun, 2025 NA

Mumbai - Maharashtra

Tender For the vessel gtv samudra sarvekshak requires fabrication of hydraulic chuck jaw finger dies and retaining device deck clamp dies and supply material at ongc base nhava, imr shed no.11 /pnv anchorage,mumbai/mbpt, mumbai depending on vessel schedule.

Central Government And Public Sector

CTN :40400871

05 Jun, 2025 NA

Bengaluru - Karnataka

Tender For fabrication of graphite probes to drg no 742 0153 10100 alt-4 item : 2 (outer dia : 25mm) raw material suitable graphite rods will be supplied by rail wheel factory. only machining and threading to be done by the fir/supplier.note: !)the supplier shall ensu re provision of personnel protection equipment to their labourers during the course of work, at his risk & cost.(2)graphite rods shall be provided by rwf.the firm has to arrarnge for collection of graphite ro ds from sse/mrs by duly submitting an indemnity bond, the proforma of which can be collected in the general stores depot(gsd).(3)the firm has to return finished graphite probes & broken graphite piece s to sse/mr.(4)transportation for shifting of raw material and machined graphite probes to be provide d by the supplier.(5)the work shall be carried out in firm's premises with the necessary special machin es and tools which shall be arranged by the supplier.(6)bills shall be claimed by the supplier after com pletion of full work and supply of finished graphite probes.payment shall be made for actual number of graphite probes accepted at rwf.. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ]

Central Government And Public Sector

CTN :40516902

03 Jul, 2025 27.00 Crore

Chitradurga - Karnataka

Tender For design, engineering, manufacturing/fabrication, supply, installation, erection, testing commissioning etc. of utility systems, utility piping, fire fighting systems, material handling equipment, electrical, control instrumentation systems

CTN :40418443

30 May, 2025 11.82 Lacs

Multi City - Karnataka

Tender For corrigendum : supply of matrials to constraction katageri nrlm shed - broken stone aggregate 40 mm size (kat01), broken stone aggregate 20 mm size (kat01), broken stone aggregate 12 mm to 10 mm size(kat01), coarse sand (zone iii) (kat01), portland cement (kat01), mixer (concrete) - 1 cum capacity (kat01), add watering charges at 1 percentage on material (kat01), add sundries charges at 1 percentage on material (kat01), transportation/loading and unloading of material/lifting of material /wastage/unforeseen charges/miscellaneous which are necessary during execution. (kat01), granite/trap broken metal 100 mm and down size (kat01), plasticizer / super plasticizer (kat01), hom of vibrator 0.71 days (kat01), tmt bars fe 500 (kat01), binding wire (kat01), size stone 20 x 20 x 25 cms (kat01), bond stone 20 x 20 x 45 cm (kat01), boulders (kat01), mixer (concrete small used in culvert) (kat01), mason class i (with tools) (kat01), mason class ii (with tools) (kat01), stone chistler class ii (kat01), add sundries charges at 1 percentage on labour (kat01), add watering charges at 1 percentage on labour (kat01), silver oak or equivalent planks 38 mm thick (kat01), casurina poles 100 - 150 mm (kat01), add handling , loading and unloading at 2 percentage on material (kat01), add sundries charges at 2 percentage on material (kat01), casurina poles 75 - 100 mm dia (kat01), jungle wood runners and planks (kat01), solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm (kat01), add handling , loading and unloading at 1 percentage on material (kat01), solid concrete blocks (40x10x20 cms)-4.00 n/sqmm (kat01), add providing and removing scaffolding at 3 percentage on labour (kat01), vitrified tiles 600x600 mm (kat01), mathi/nandi wood planks for panels 25 mm thick (kat01), add cutting and other wastage 5 percentage (kat01), hom of machinaries for planing (kat01), mathi/nandi wood scantling (kat01), unit cost as per the specification (kat01), m.s rods (kat01), ms flat (kat01), fitter class i (kat01), welder grade i (kat01), add hom of welding and grinding machine at 4 percentage on material (kat01), ready mix primer paint (ready mix red lead paint) (kat01), add wire brush, fine steel wool, putty, sand paper, at 3 percentage on cost of paint (kat01), painter class i (kat01), enamel metal paint (kat01), add brush at 1 percentage on cost of paint (kat01), ceramic tiles 30 x 30 cms (kat01), white cement (kat01), plastic emulsion paint (kat01), add brush, putty, sand paper, roller at 5 percentage on cost of paint (kat01), water proofing cement paint (kat01), add brush, putty, sand paper at 2percentage on cost of paint (kat01), liquid wood filler (kat01), add brush, putty, sand paper at 5 percentage on cost of paint (kat01), enamel paint (kat01), polyenthylene water storage tank of specified capacity l (kat01), labour charges for lifting and placing in position and making connection at 7 percentage on material (kat01), handling loading and unloading 3 percentage on material (kat01), indian type water closet of size 580 mm of specified make with footrests (kat01), a 100mm s or p trap (kat01), add white lead paint, gasket, cement, sand for making good the wall and floor at 2 percentage on material (kat01), add cement sand and grit 1 percentage on material (kat01), licenced plumber with tools (kat01), add 5 percentage for fittings and wastage charges (kat01), polythylene pipes high density 25mm external dia (kat01), cost of 6.5mm m.s. coil (kat01), fabrication charges. (kat01), labour charges for handing errection of rcc rings etc. at 5 percentage (kat01), transportation charges of materials beyond 5 km at 10 percentage (kat01), rcc cap 1000 mm dia, 100 mm thick (kat01), pvc pipe of 10kg/cum,90 mm (kat01)

CTN :40468478

05 Jun, 2025 17.50 Lacs

Salem - Tamil Nadu

Tender For purchase of mini lorry for public health use in p.n.patty town panchayat - a hopper tipper dumper is a truck designed for carryingmaterial, which may be garbage, construction material,mining minerals and any other loose material. the truck isfi tted with specially designed hydraulic tipping mechanismdriven by pto or power pack, which enables the dumper(rear portion expect the driver cage) to move up and downfor unloading of the material. it is the safest way to quicklytransport loose materials from one site to another., generic parametersvehicle category, generic parametersvehicle category, vehicle engine cubic capacity (cc), type of fuel, vehicle emission compliance, number of cylinder in engine (nos), vehicle mileage (declared by oem as certified by test agencyunder rule 115 of cmvr 1989) (kmpl), gradeability of vehicle (degree in first gear), maximum engine power range (in kw), max engine power (kw@rpm), max engine torque (nm@rpm), fuel tank capacity (liter), category of vehicle for which chassis to be used, overall length of vehicle (mm), overall width of vehicle (mm), overall height of vehicle (mm), ground clearance (mm), minimum wheel base (mm), type of tyre and tube (for both front and rear), front vehicle brake, rear vehicle brake, vehicle transmission system, type of steering, turning radius (mm), nos of forward gears, vehicle air intake system, type of clutch, axle configuration, front axle suspension system, rear axle suspension system, air conditioning, standard spare wheel and tool kit, warranty period, battery warranty (month), number of free service (nos), fabrication description, type of tipper, define type of tipper, tipping angle (degree), hopper tipper dumper container capacity/volume (cubicmetres), tipper body pivot length (mm), tipper body length (mm), tipper body height (mm), overall height of tipper from ground (mm), dumping height (mm), body plate thickness (mm), tipper sub frame thickness (mm), hydraulic system, tipping hydraulic cylinders(make), hydraulic system driven by, tipper container material, engine oil pressure level indicator in control panel, fuel gauge indicator in control panel, engine cooling liquid temperature indicator in control panel, operating hour meter, locking/unlocking of tipper discharge container, lowering/lifting of tipper discharge container, counter weight, insurance charges, temporary registration charges & permanent registration charges

Fabrication Material Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors