Latest face milling Tenders | Government face milling Tenders

Central Government/Public Sector

CTN :45708376

18 Jul, 2026 NA

Dankuni - West Bengal

Tender For corrigendum : supply of side and face milling cutter to suit insert no. aomt170508peer-h acp 300 and insert screw as per following specification: (i) two number side and face milling cutter with cutting dia- 100 mm, arbor bore dia- 32 mm, no.of flute= 8-10, (ii) two compatible screw driver with 20 compatible screws. make/ brand: motherson(sumitomo)/sandvik/motherson/dormer pramet or similar. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

CTN :45679372

02 Jul, 2026 20.16 Lacs

Delhi - Delhi

Tender For supply and replacement of defective parts of kirloskar make transformers of 1000/750/500 kva capacity at ugc & cag building, new delhi. - supply and fixing of over current earth fourth relay 24 dc l&t make etc complete as reqd. , supply and fixing of 11 kv indoor single phase resin cast current transformer 300/5amp etc complete as reqd., , supply and fixing of transformer 500 kva 11/0.433 kv wt1 scanner & rtd sencer lead., , supply & installation of suitable rating of 500 kva 11/0.433 kv lv bussing porcelain or epoxy-cast resin comply with is-1180 complete as required, , supply and fixing of suitable rating of 500 kva 11/0.433 kv lv flexible porcelain or epoxy-cast resin comply with is-1180 complete as required., , dismantling /loading and unloading of 500kva, 11kv/433volt, 3phase, 50hz, cast resin dry type kirloskar make indoor transformer hv/lv coil/core etc and repair of crack in hv/lv winding/core and putting cast resin/resin hardener, reassembling all the dismantle parts accessories confirming to is 11171 and iec 60076 etc including all tests i.e voltage ratio, magnetic balancing, vector group, ir magnetizing current, winding resistance etc complete as reqd., , supply & installation of 630a vcb vacuum interrupter etc complete as reqd., , sh-2 (old cag bldg), , supply and replacement of 750- 1000 kva transformer oil gas kit etc complete as reqd., , checking in 750-1000 kva transformer all type of protection etc complete as reqd., , supply and replacement of lv bushing oil seal in 750-1000 transformer etc complete as reqd. no.ryb) (4, , supply and replacement of hv bushing oil seal in 750-1000 transformer etc complete as reqd. (3 no. r,y, b), , supply and replacement of off load tape changer in 750-1000 kva transformer etc complete as reqd., , replacement of transformer oil in oltc top-up of main tank etc complete as reqd., transformer oil filtration and dehydration of 750 kva & 1000 kva transformer using high-vacuum oil filtration plant, including removal of moisture, dissolved gases, sludge and impurities from transformer oil, circulation of oil through filtration machine, achieving required bdv value, testing before and after filtration, manpower, tools & tackles, consumables, complete as required at site., , complete servicing, overhauling, cleaning, contact checking, lubrication, insulation resistance testing, contact resistance testing, functional testing and commissioning of oil circuit breaker (ocb), complete as required at site., , supply & installation of male contact, , supply & installation of female contact, , supply & installation of over current earth fault relay, , supply & installation of 24 volt dc power pack unit etc complete as reqd., , supply and fixing of transformer wti relay etc complete as reqd.., , supply and replacement of transformer oti relay etc complete as reqd.., , providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, ics=100% icu and operational voltage 690v etc. as required., , (make: schneider electric-nsx /siemens / lk/ abb/hager)

State Government

CTN :45647309

30 Jun, 2026 1.66 Lacs

Panchkula - Haryana

Tender For -providing and fixing of mccb, ms pipe, etc. and spare parts at water works in i/a ph-i, panchkula. (a/mtc. of p.h services in sector-1 to 21 and i/a ph-i and ii, panchkula) - 24.5.1.6:- supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 16 sqmm., 23.22.1.5;- mccb ,distribution boards, mcb`s, rccb`s, change over etc. 1.5. supply and erection of modular case circuit breaker single pole/4 pole on existing wall/pedestal/panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the engineer- in-charge of the work. triple pole mccb 200 to 250 amp, 25 ka [through rate], 23.22.8.3:- mccb ,distribution boards, mcb`s, rccb`s, change over etc. 8.3. sitc four pole on load manual change over switch in ss enclosure of following ratings 200 amp 415 volts [through rate], 20.10.3:- extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 3. 150 mm i/d [through rate], pm017. hire and running charges of crane 20 tonne capacity [rate], el270. m.s. pipe 100mm dia, [rate], ns item:-providing and fixing of spare part of sewer cleaning machine including cost of 40 ltr. hydraulic oil for pump, 12 mtr. suction pipe, 4 set millar coupling including handling and fixing charges complete in all respect to the entire satisfaction of eic.

Central Government/Public Sector

CTN :45163125

23 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For bid to ras bid to ras corrigendum : supply of carbide insert r245-t3m-pm sandvik make or semt 12t3agsn-jh mitsubishi make or sept 13t3agengd kennametal make or other equivalent insert , shim suitable for existing face milling cutter r245 160q40-18m of sandvik make. , shim screw suitable for existing face milling cutter r245-160q40-18m of sandvik make. , insert screw suitable for existing face milling cutter r245-160q40-18m of sandvik make. , carbide inserts sekn 1203. cvd - pvd-coated for medium machining of stainless steel material, iso application range m35 min. , ceramic insert cnga 120408.insert must be coated with tin pvd coated aluminium oxide and titanium carbide tin coated al2o3 plus tic for machining of hardened steel material having hardness 52-58hrc.

CTN :45618427

10 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For face milling cutter dia 63 mm x bore dia 22 mm x oal 40 mm, no of insert pocket minimum 05 nos, ap ma , insert with 4 cutting edge for face milling cutter, insert length minimum 13 mm x width minimum 4 mm

CTN :45588900

08 Jul, 2026 5.20 Lacs

Panchkula - Haryana

Tender For tender for supply of indexable insert type 45 deg milling cutter dia 25 ws dia 25 z2 as per detail in anexure a , inserts for above cutter dia 45 as per detail in anexure a , indexable insert type 45 deg. face milling cutter dia 50 bore dia 22 z4 as per detail in anexure a , inserts for above cutter dia 50 as per detail in anexure a , indexable insert type 45 deg. face milling cutter dia 100 bore dia 32 z4 as per detail in anexure a , inserts for above cutter dia 100 as per detail in anexure a , wiper insert for above cutter dia 100 as per detail in anexure a , solid carbide ball nose end mill dia.12 ss dia 12 as per detail in anexure a , special solid carbide ball nose end mill grade tin coated dia 20 s s dia25as per detail in anexure a , square shoulder face mill mill dia 50 bore dia 22mm z5 , suitable inserts for above face mill cutter dia 50 as per detail in anexure a , solid carbide end mill dia 10mm , weldon shank dia 10mm as per detail in anexure a , solid carbide end mill dia 20mm , weldon shank dia 20mm , solid carbide end mill dia 10.2mm , weldon shank dia 12mm , hss machine tap m12x1.75 , straight shank dia 9mm

CTN :45579098

07 Jul, 2026 NA

Medak - Telangana

Tender For tender for throw away inserted design face milling cutterwith approach angle 45 degrees. (high shear face millin

CTN :45551788

06 Jul, 2026 10.06 Lacs

Darjeeling - West Bengal

Tender For supply of puf insulated ppr pipe 32 mm with self regulating heat , puf insulated ppr pipe 20 mm od with self regulating heat tape 35 w mtr and m20 connectors , ppr elbow for pn 20 pipe 3 layer 32 mm and 20 mm size , ppr tee for pn 20 pipe 3 layer 32 mm to 20 mm size , ppr union for pn 20 pipe 3 layer 32 mm and 20 mm size , temperature differential controller for automatic on off operation of heat tape , programmable on below 10 degrees c , pt 100 sensor with 10 mtr signal wire , 3 core 1.5 sqmm copper wire for making connection , black duct tape for protection of nitrile foam to be used on joints with insulation aluminium tape for cladding of nitrile foam joints , puf 40mm thick and 48 kg cum insulated water tank capacity 2000 ltr , ppr pipe jointing machine , supply of 01 nos 3 hp open well submersible pump with dol starter panel. , ppr socket 20mm fta brass 20 to 15 mm , ptmt bib cock 15 mm , tank nipple 32 mm , ppr gate valve 20 mm * /bid number : gem/2026/b/7663417 + /dated: 14-06-2026 ' ' / bid document 1 / 19

CTN :45543246

29 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of b22 cap , housing body , mcpcb -metal core printed circuit board , led driver -rectifier circuit , heat sink -tikki- , heat sink compound , diffuser dome , soldering flux , soldering wire , soldering iron 25 watt , heat sink -tikki- making machine , punching machine

Face Milling Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector