Get complete information related to latest Facing Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Facing Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Facing Tenders.
Tender For earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of engineer for following depths, below natural ground /road top level in all types soils/saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. depth upto 1.5 m providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level: 1:4:8 (1 cement: 4 fine/coarse sand: 8 graded stone aggregate 40 mm nominal size). random rubble masonry with hard stone in foundation and plinth: cement mortar 1:6 (1 cement: 6 coarse sand) for tin shade suporting wall brick work with fps bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in cement mortar 1:6 (1 cement: 6 coarse sand) cement plastering including t&p, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix including providing /mixing of synthetic fibers compulsorily complying with is 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of cement i.e. 125 gms per 50 kg cement up to 900 gms per cum of concrete/mortar 1:6 (1 cement: 6 fine/ coarse sand) neat cement punning steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth evel 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), providing and fixing 1st quality mat & glossy finished ceramic tiles colour such as standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorption less than or equal to 0.08% confirming to is: 13753 & is: 15622 in floor, steps etc laid on bed on neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4) size 300mm x 450mm providing & fixing uv stabilised fibreglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated 'j' or 'l' hooks, bolts & nuts 8mm dia. g.1 plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. the sheets shall be manufactured out of 2400 tex panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. they shall be of uniform pigmentation and thickness without air pockets and shall conform to is 10192 and is 12866. the sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. aluminium sheeting fixed with encapsulated lens type reflective sheeting in various size including lettering and signs as applicable
Tender For corrigendum : construction of brick masonry boundary wall with rcc column and frame work along with concertina coil fencing at top after dismantling existing damaged boundary wall for csb-central tasar research & training institute, piska-nagari, ranchi-3 sh :construction of brick masonry boundary wall at laboratory campus (balance work)
Tender For work of granite floors and masonry plastering will be available in the tax branch of bhuj municipality's new office building in the middle of bhuj
Tender For (1) rates for p.v.c. pipeline and galvanized pipe line of drinking water with all diameter materials. (isi hallmark pipe)(2) r.c.c. pipe rates with each diameter (np2, np3, np4) quantity (government recognized organization testing report has to be submitted.)(3) 1000 nos. brick (red and flyash), sand, gravel, korivesat, g.s.b, metal, rubber, machine cut, moram, powder, pono, grit, etc. 1 ton rates of material.(4) rates for carrying soil by small and big trucks and tractors for 1 trip (with j.c.b. to be filled and without filling)(5) rates for making asphalt surface road material, rolling, works.(6) rates with materials and labor for repairing water pipe line and laying new lines.(7) labor rates (square meter) and material rates for making r.c.c. roads. (government recognized organization testing report has to be submitted.)(8) labor rates for rolling and laying metal for making asphalt surface road.(9) rates for making new and old gutter lines for excavation, filling, fitting, well masonry (each size) and making covers (each size).(10) complete new street light/c.f.l/l.e.d./ and rates for light materials (c.f.l./l.e.d./ 4 feet complete street light i.s.i. mark company and volt rates)(11) street light/c.f.l./l.e.d. light repairing and new installation work rates(12) xerox (plain and color), and photo color print, lamination rates (as per each size)(13) j.c.b. and hitachi machine rates for cleaning grass and excavating gutters and other works for 1 hour.(14) rates with materials and labor for installing paper blocks. (60 mm and 80 mm) (government recognized organization testing report has to be submitted)(15) rates of one paper block (60 mm and 80 mm) (government recognized organization testing report has to be submitted)(16) rates for repairing submersible pump of varigruh submersible pump, motor rewinding and purchasing different h.p. submersible.(17) rates of purchasing and spraying insecticide powder, daily labor rates.(18) rates for making iron clamps on walls and cement and iron pillars of street light/c.f.l./l.e.d. lights and iron poles.(19) door to door garbage collection with vehicle and without vehicle rates and garbage disposal rates.(20) gutter cleaning and street cleaning rates; regarding passing the tender for vari gruh and electric material street light; regarding passing the gutter cleaning tender
Tender For supply of procurement of em stores and fire point stores d d -ug armoured lt xlpe cable 1100v pvc bedded galvanized steel strip armoured electric lt ug cable heavy duty with multi stranded aluminium conductor of size 70sqmm x 3 point 5 core , ug armoured lt xlpe cable 1100v pvc bedded galvanized steel strip armoured electric lt ug cable heavy duty with multi stranded aluminium conductor of size 50sqmm x 3 point 5 core , supply street light junction box size 200x160x98mm safe shock proof impact resistant weather proof dust proof rust proof having internal embedded gasket technology , supply energy efficient led light fittings cap 70w ip-66 degree of protection individuals led should have lenses of better throw across and along road range 140 to 280v , supply pvc insulated flat three core cable with aluminium conductor 1 point 5 sqmm for connecting street light fitting from junction box complete all as specified and directed , surface excavation n exc 30 cm , excavation in trenches exc 1 point 5 m depth , pcc 1 is to 2 is to 4 in foundation , pcc 1 is to 2 is to 4 in post hole , precast cement concrete block masonry type c1 1 is to 3 is to 6 20mm graded aggregate set in cement mortar 1 is to 6 with solid exc 10cm in width and setting in mortar complete , rendering 10mm thick in cm 1 is to 4 , sand filling under floor , m and l ms work angle iron framing , m and l two coats of synthetic enamel paint over red oxide primer on new steel surface including preparation of surfaces complete all as specified , m and l hard core 100mm , m and l pcc 1 is to 2 is to 4 type b1 as in floor 40mm , s and f 0 point 63 mm thick cgi sheet fixed with j or l hook , sand f 0 point 80mm thick cgi sheet ) /bid number : gem/2026/b/7348872 * /dated: 13-03-2026 & & / bid document 1 / 17
Tender For supply of 8019170065 mt3 insert type spot face cutter dia24mm , 8019170075 mt3 insert type spot face cutter dia30mm , 8019250475 dia 42mm rear spot facing cutter
Tender For corrigendum : supply of purchase of underwater parts for chamera3 power station -upper fixed labyrinth hincmr20meatb21206 rev b , upper rotating labyrinth hincmr20meatb32203 rev a , lower fixed labyrinth hincmr20meatb22212 rev c , facing plate lower for bottom ring in 10 segments hincmr20meatb22203 rev c , facing plate upper for top cover in 10 segments , breaking bolt for facing plate as per drawing , special screw m 12 to be fabricated as per drawing or sample , special bolt m30 item no 235 drawing no hincmr20meald50001 to be fabricated as per drawing or sample