Latest false flooring Tenders | Government false flooring Tenders

State Government

CTN :40557200

14 Jun, 2025 NA

Amravati - Maharashtra

Tender For supply of cmt crt flooring 40 mm thick , providing and fixing in position tmt fe 500 bar reinforcmt , providing second class burnt brick masonry , providing internal cmt plaster 12mm thick in single coat , providing internal cmt plaster 20mm thick in single coats in cmt mortar , providing sand faced plaster externally in cmt mortar , providing and applying water proofing treatment , providing and fixing on walls ceiling floor 15 mm dia , providing and fixing on walls ceiling floor 25 mm dia. , providing and fixing on walls ceiling floor 40 mm dia. , providing and fixing p.v.c. rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm , providing and fixing p.v.c. rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm , providing and fixing 100 mm dia stabiliser pipe p.v.c. soil ventwaste pipe , providing and constructing brick masonry inspection chamber , providing and fixing mild steel grill wrk for windows, ventilators , providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm , supply and fixing of rock stone finished full body , providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness , providing and laying antiskid ceramic tiles of approved quality of size 30 cm x 30 cm , providing and laying ceramic tiles of having size 30 cm. x 30 cm. , providing and laying telephone black amba white cadburybrown ruby red ocean brown granite stone of 18 to 20 mm thick , providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm , providing and fixing tbl top white wash basin of size 120x635x405mm rubber plugs and brass chain , providing and fixing white european type wallhung pan , providing c.p. handshower health faucet 1 m pvc tube with wall hock jaquar make , providing c.p. toilet paper holder jaquar make continental , providing c.p. soap dish hooker jaquar make continental , providing and fixing divertor with overhead shower , providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories , providing and fixing 3.5 to 4 mm thick veneer finish wall panaling made out of 50 x 25 mm , providing and fixing rollar blinds ami make or approved make and shade , providing and fixing false ceiling with ecofriendly lightweight calcium silicate tiles , scrapping the old plastered internal surface with sand paper and coating. , providing and applying two coats of wall care putty on plastered surface , providing and applying plastic emulsion paint of approved quality, colour and shade , providing and applying two coats of exterior weather shield paint , providing and fabricating structural steel wrk in rolled sections like joists, channels, angles, tees , providing and fixing colour coated zinkalume r az150 , providing and applying two coats of flat oil paint , providing and fixing in position aluminum sliding vindov of 3 tr , providing and fixing solid core flush door shutter , providing and fixing single or double leaf panelled door shutter , providing and fixing in position powder coated aluminium louvered windows , providing and fixing overall 26height and 22depth,supported on aluminum pips ,troly basket made out of 5 mm ss rod ss kichen troly , providing and fixing of main tbl at 3600lx1400dx750ht made up of 18plus18mm thick mdf top with pvc membrane , providing and fixing single lair or birth of size 2025lx1000dx650h with cushn and bolster. , providing and fixing lair or birth side tbl of size 400lx 400dx 415h the lair or birth side unit is made up of 18mm thick prelam particle board with both side decorative lamina , providing and fixing dressing tbl of bid details/ 2 / 52 size 400lx 400dx 1800h. , providing and fixing wardrobe with mirror of size 900lx 600dx 1965h the wardrobe side panels and doors are made up of 18mm thick prelam particle board with both side decorative laminate. , providing and fixing cauche

CTN :40291129

05 Jun, 2025 NA

Kamrup - Assam

Tender For corrigendum : supply of superstructure for 01 x dining hall modular 26m x 7.5m x 4.75m including as per technical specification and drawings attached , construction material for 01 x dining hall modular 26m x 7.5m x 4.75m including precast foundation and plinth protection and sewage system and flooring and ms staging work manhole etc , e and m items for 01 x dining hall modular 26m x 7.5m x 4.75m as per technical specification attached , ceiling fans sweep 1400 mm , ceiling fans regulator , led tube light 600mm for toilets , led street light 65w , switch socket combination 5 pin 5 amps cum 15 amp with concealed metal box , switch socket combination 5 pin 5 amps with concealed metal box , switch 6 amp with isi mark , mcb 10 amp sp 240 volts b series , mcb 20amp sp 240 volts b series , mcb 25 amp sp 240 volts b series , mcb tpn 100 amp , mcb distribution box double door spn 12 way , mcb distribution box double door tpn 4 way , lightning conductor items for 01 x dining hall modular 26m x 7.5m x 4.75m as per technical specification attached , earthing set items for 01 x dining hall modular 26m x 7.5m x 4.75m as per technical specification attached , fire extinguisher items for 01 x dining hall modular ball type fire extinguishers powder type having 2 kg capacity conforming to is 13849 along with its accessories and fixing arrangements on wall , ppr items for 01 x dining hall modular 26m x 7.5m x 4.75 m as per technical specification attached , b and r items for 01 x dining hall modular 26m x 7.5m x 4.75 m as per technical specification attached , ewc of size 580 mm x 440 mm with cistern 10 ltrs cap flushing cistern pvc complete with entire accessories , whb of size 400 mm x 400 mm including ms stand and pvc hdpe pipe 32 mm dia etc complete make jaquar and cera and hindware and parryware , cp bid cock of 15 mm bore make jaquar and hindware and parryware , cp stop cock of 15 mm dia make jaquar and hindware and parryware , cp soap dish of 100 mm dia , cp angular cock 15 mm dia make jaquar and hindware and parryware , cp piller cock 15 mm dia make jaquar and hindware and parryware , pvc insulated connection 15 mm dia 450 mm long , stainless steel jali with hole for waste pipe of 100 mm with isi mark , decorative oval shape looking mirror 5.5 mm thick of size 450 x 600 mm make saint gobin and modi guard and dura fit confirming to isi standard , ss round hand towal holder length 600 mm , pvc water tanks of 1000 ltr capacity make sintex and supreme and prince and vectus and plasto and ashirvad , fire alarm and smoke detctor system for 01 x dining hall moddular individual standalone plastic body smoke alarm with adequate provisnion for fixing on wall and ceilling and roof , individual standalone plastic body heat alarm with adequate provision for fixing on wall and celling and roof

Central Government/Public Sector

CTN :40297576

03 Jun, 2025 38.32 Lacs

Guwahati - Assam

Tender For corrigendum : provn of connecting road from 5 afsb permanent location to 19 wing, provn of miscellaneous br works, false flooring in server room of cpss building, weather shed for garage and top cover of static water tank at 5 afsb under ge (af) borjhar

CTN :40505685

04 Jun, 2025 56.27 Lacs

Multi City - Telangana

Tender For husnabad municipality balance work for construction of new municipal office building near mpdo office granite flooring, ss railing, gypboard false ceiling etc

Corporations / Associations / Others

CTN :40477006

07 Jul, 2025 89.82 Lacs

Hebbagodi - Karnataka

Tender For supplying and laying of epoxy flooring applying of pu paint and fixing of of ss hannd rail work in rbl and pit wheel lathe at hebbagodi depot

State Government

CTN :40501962

04 Jun, 2025 1.14 Lacs

Srinagar - Jammu And Kashmir

Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc

corporations/Associations/Others

CTN :40490157

30 May, 2025 4.13 Lacs

Multi City - Telangana

Tender For laying of sw drain with 300mm dia np2 class pipe line and ss flooring inside jamia masjid, darulshifa in pathergatti div -32, cir-9, crz, ghmc (reserved for all st individuals/ proprietorship firms/partner ship firms) (recall) (a.s fy 2025)

State Government

CTN :40458807

06 Jun, 2025 15.18 Lacs

Sambalpur - Odisha

Tender For repair and maintenance works to 400 220 132 33 kv grid sub-station control room, lapanga.(provision for facilitate cable trench in ground floor and false flooring to first floor with other ancillary work)for stams

Central Government / Public Sector

CTN :40441016

05 Jun, 2025 1.11 Crore

Haldia - West Bengal

Tender For custom bid for services - 9040c25b52 annual repair contract for process scheme jobs in instrumentation department on open tender basis- equipment hiring charges - 1 hydra 10t (hired) 4640, 2 hydra 15t (iocl owned) 4944, 3 hydra 25t (hired) 5551, 4 crane 50t (hired) 10785, 5 crane 75t (hired) 10785, 6 forklift ( iocl owned) 1738, 7 180t crane (hired) 18296, 8 articulated boom (hired) 2208, 9 tractor and trailer (hired) 2076, supply of materials for secured advance- civil items: a. items against which secured advance can be granted :, 1. bricks, 2. stone and brick aggregates, 3. stones, 4. finished products of brass, iron or steel such as doors and window frames,, wiremesh, gate, gi sheets., 5. pre-cast rcc products such as pipes & fittings, jail, water storage tanks., 6. doors and windows fittings., 7. pipes and sanitary fittings of gi, ci, sci and hci., 8. metallic doors / windows., 9. ms gratings., 10. reinforcement bars., 11. hydraulic door closers., 12. structural steel., 13. flushing cisterns., 14. ci valves, sluice gates etc., 15. fencing materials chain-link / barbed-wire etc., 16. anchor bolts., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. kitchen sink china vitreous, flush back for wash basin vitreous china water closet, and pedestal type water closet vitreous china, urinals., 2. glazed tiles, terrazo tiles and similar articles., 3. marble slabs., 4. asbestos cement products., 5. finished timber products such as doors, windows, flush doors, particle boards, (subject to the mandatory tests being satisfactory)., 6. bitumen in sealed drums., 7. bitumen felt., 8. polythene pipes & fittings, sanitary fittings and pipes of sw, porcelain and, chinaware materials., 9. laminated / safety one way vision and bullet proof glasses., 10. chemicals required for anti-termite treatment (in sealed drums)., 11. paints, varnishes, distempers, pigment, spirit., 12. cement tiles., 13. acid proof tiles., 14. bitumen products required for mastic flooring etc., 15. water proofing compound such as cico etc., 16. materials for epoxy finishing etc., electrical items, a. items against which secured advance can be granted :, 1. steel conduit, 2. gi pipes, 3. ci boxes, 4. ic boards., 5. switchgears (air circuit breakers and air break switches), 6. a c s r conductors, 7. a.c. plant & machinery., 8. pumps, 9. generating sets (without oil), 10. gi strips., 11. street light poles (steel), 12. cable trays., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. transformers, 2. switch gears ( oil filled), 3. lt & ht cables, 4. fans, 5. store & dry batteries, 6. insulation tapes., 7. epoxy cable compounds., 8. electric light fittings., 9. wood battens, casing & capping and wooden boards., 10. flexible wires., 11. pvc materials, 12. rubber materials, 13. glass wools, thermocol and other insulating materials., 14. porcelain ht and lt insulators., 15. electric heat tracing tapes., mechanical items, a. items against which secured advance can be granted :, 1. structural steel., 2. plates., 3. pumps / motors, vessels etc., diesel engine, side entry mixers, suction heaters &, any other mechanical equipment., 4. refractory bricks., 5. ss foil., 6. pipes / pipe fittings., 7. gratings., 8. valves, hydrants, monitors., 9. aluminium sheet., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. bitumen, 2. wrapping & coating material, 3. primer / paint, 4. foam / foam seal material, 5. guniting material, 6. insulation & refractory materials other than bricks., instrumentation items, a. items against which secured advance can be granted :, 1. structural steel, 2. ms sheet / gi sheet, 3. pre-fabricated trays, 4. pipes / tubes / fittings, b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. ss / copper tube

Central Government/Public Sector

CTN :40434732

14 Jun, 2025 40.00 Lacs

Kishangarh - Rajasthan

Tender For supply of lab furniture of central instrumentation facility, central university of rajasthan - wall mount cabinets with metal door, sefa-8 standards heavy duty wall mount cabinets: sefa-8 standards heavy duty cabinet body shall be in 1.2mm thick material of construction: 1.2 mm gi sheet with ss 304 hinges and handles. epoxy powder coating of 60 -80 microns. - size - 600mmlx450mmdx750mmh. provison of lock is required. these units will be fitted in the service areas of the drawing., under bench storage units (qty as per drawing)sefa-8 standards heavy duty under cabinets & drawers: sefa-8 standards heavy duty under module (cabinet body shall be in 1.2mm thick and drawer front & shutter shall be in 1 mm thick), the cabinet should have adjustable height shelf. the storage cabinets should be made of crca 20 gauge. (tata/ jindal/sail/jsw in panel construction. cabinets should have sandwitched doors & drawers filled with pcapsal sheet should be lined on the edges of doors and drawers for sound deadning. the cabinets should be interconnected with spacer which strengthens over all structure of the table / bench. ss fasteners should be used at exposed area inside the cabinets.. the drawer glides should be telescopic glides which gives strength with smooth movebase cabinet of 600 mm with 1 drawer & 2 shutter with lockbase cabinet 750mm with 1 drawer & 2 shutter with lockbase cabinet 900w 1 drawer & 1 shutter with lockbase cabinet 450mm 1 drawer & 1 shutter with lock, modular sink unit ( corner unit )specification of material of construction is same as under cabinets. the front panel should have single door with handle. sink bowl and bottle trap should be of polypropylene. one way ss faucet., filler panels (qty as per drawing)specification of material of construction is same as under cabinets., frame assembly for wall cabinet bench (qty as per drawing)material:steel tubing, of hollow sections conforming to standards is code:square pipe with a cross-section of 30mm x 30mm and a minimum thickness of 1.2 to1,6 mm. finish: powder coating: highly corrosion-resistant epoxy powder coating, typically 60-80 microns thick,, with pre-treatment for better adhesion. .legs:adjustable levelling feet: required for uneven flooring, typically with a tolerance of -5mm to +20mm., 17mm (+/-1) thick black granite (qty as per drawing), garment locker1000mmlx450mmdx2100mmh, made of ss 304, thickness of sheet is 1.2 mm and finish is matt. total 9nos. of lockers of equal size is required with provision of lock., shoe rack 1200mmlx300mmdx600mmh - two tier ss 304 shoe rack. made of 30mmx30mmx1.2mm pipe., hardware fittingsa) hinges :- hettich/haffele/godrej.b) handle :- ss304 matt finish d handle / aluminium flush handle.c) screw :- all s.s. 304 visible screws.d) lock :- hafele / hettich / godrej make with pair of keys. e) drawer channel :- hettich / ebco / haffele make telescopic drawer slides 45kgs

False Flooring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors