Latest fan coil unit scrap Tenders | Government fan coil unit scrap Tenders

Central Government/Public Sector

CTN :40510503

10 Jun, 2025 NA

Bangalore - Karnataka

Tender For supply of air curtain of 4 feet size of: 1) dimension (mm) : 1200 x 230 x 212 2) max. air velocity at no zzle : 21m/s 3) noise level db : 50 - 70 db 4) body material : stainless steel 5) width size : 4 feet 6) no. of blowers : 4 7) no. of copper wound motors : 2 8) hp : min. 0.7 9) voltage : 220v/50hz 10) no. of shafts : 2 double 11) rpm (max/min) : 2700 / 2100 12) blower material : abs 13) cfm : 1100 14) % insect / dust reje ction : 75% 15) effective height : 14 feet [ warranty period: 30 months after the date of delivery ]

CTN :40135848

30 May, 2025 NA

Hooghly - West Bengal

Tender For corrigendum : supply of other section , m and l for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces width or girth exc 10 cm including preparation of surfaces all as specified and as directed. , m and l for three coats of white washing on new plaster and unplaster of wall surfaces including preparation of wall surfaces complete all as specified and as directed. , s and f steel stainer for sewage sumps of different pores as specified and directed by engineer in charge , suppy of stand by non clogging pump of 5hp 1520 lpm with all accessories and fittings as specified and directed by engr in charge , heavy duty double tank type chemical dosing system consist of service tank 150 ltrs capacity with dosing system plunger type , s and f gi strip 25x4mm as earthing lead bolts nuts checknuts and washers all as specified and directed , material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick , pumping out sewage water from the existing sumps of sewage plant pump house with the help of non clogging of pump any kind capacity of pump set not less than 2160 lpm , lifting the non clogging pump set electrically operated by 15hp 20 hp 3 phase motor incl column pipe line shaft etc , dismantling of non clogging submersible pump of capacity 15hp 20 hp for comprerhensive maintenance and if required taking out burnout old winding from the stator , lowering complete the non clogging pumping set and reflixing the motor carefully including connection and testing , pumping out sewage water from the existing sumps tanks of stps mbbr technology with the help of non clogging , cleaning of 1.2 mld sewage treatment plant after pumping out sewage water from the existing sumps , lifting the non clogging submersible pump set electrically operated by 3.7 hp 3 phase motor incl column pipe line , dismantling of non clogging submersible pump of capacity 3.7 hp and taking out burnout winding from the stator of motor and rewinding with pvc copper wire , dismantling of electric sewage induction motor 3.0 hp ac 3 phase 415 volts from site after disconnecting from pump , dismantling non clogging pump set of centrifugal type 3.0 hp induction motor ac 3 phase 415 volts , dismantling of electric induction blower motor 5.0 hp ac 3 phase 415 volts for comprehensive maintenance from site after disconnecting , dismantling of electric induction blower motor 30.0 hp ac 3 phase 415 volts for comprehensive maintenace from site after disconnecting from blower electric connection , material and labour for pcc 1 3 6 type c2 using 40mm graded stone aggregate for foundation etc , m and l for taking out comprehensive maintenance of existing unserviceable air blower of any make of capacity 125 cubic hr to 188 cubic hr with taking out of electric cable , supply only gear oil ep 90 complete all as specified and as directed by engineer in charge. , supply only air filter suitable for existing one complete all as specified and as directed by engineer in charge. , supply only belt as per existing model complete all as specified and as directed by engineer in charge. , supply only bearing as per existing complete all as specified and as directed by engineer in charge. , supply only set of rotor with hub as per existing model complete all as specified and as directed by engineer in charge. , m and l for finding out defect of stps panel and taking out burnt interconnection wiring including u.s and serviceable component for re use including rewiring of panel , supply and fix in repairs flexible flat pvc copper couductor stranded submersible cable cores 1100 volt grade 4 sqmm 3 bid details/ 2 / 41 core , supply and fix in repairs flexible flat pvc insulated pvc couductor stranded submersible cable cores 1100 volt grade 10 sqmm 3 core , s and f round strand steel wire rope dia 12 mm and connected clamp nut bolts fixed complete all as specified and as directed by engineer in charge. , s and f submer

CTN :40170938

30 May, 2025 NA

Jhansi - Uttar Pradesh

Tender For bid to ras supply of gdc dental syringe aspirating with ring 1 point 8ml , gdc root elevators warwick james straight ewjs , gdc periosteal elevator labanca 3 , gdc luxatip 2mm straight l2s , api gracey curettes set of 08 , waldent pedo extraction forceps kit set of 07 k , orthomax maxillofacial mini bone plates screws and instruments box size standard size kit , gdc wax knife spatula fahnenstock small wkfs , gdc wax lecron carver wcl4 , dental rubber chip blower with stainless steel nozzle , dental rubber mixing bowl flexible size large , api mixing spatula for plaster and alginate materials , gi dental wax spoon , dental rubber mixing bowl flexible size small , gi dental hot plate , gdc impression trays edentulous non perforated set of 08 , stainless steel dental fox plane , dental articulator plane line hinge type , gdc mouth mirror handles 3 mh3 , gdc london collage tweezer dpu17 , gdc explorer double ended 1 exd5 , dental endo measuring block l , gdc dental rubber dam kit adult , composite filling instruments teflon coated set of 06 , orthomax bone elevator hohman type , orthomax bone tap stainless steel , orthomax plate holding fork , orthomax plate spacer , orthomax forked ramus retractor , orthomax bristow elevator bid number/ & ( * ) : gem/2025/b/6179571 dated/ + : 29-04-2025 bid document/ 3 3 1 / 26

State Government

CTN :40426044

10 Jun, 2025 50.00 Lacs

Betul - Madhya Pradesh

Tender For corrigendum : purchase for electric and solar item - water cooler 80 l., exhaust air cooler 3.5 feet, heavy steel body, exhaust air cooler 4 feet, heavy steel body, sign board with writing, electric torch, water camper 20 ltr, ceiling fan 48 inch, table fan medium size, wall fan medium size, normal steel office chair, revolving chair, steel almirah for office height 6ft width 4ft heavy material, whistle with lanyard, mosquito net single bed, cap, 1.25 mtr., tractor, hydraulic tractor trolley, water tanker 2 wheeler 5000 l., 2t oil & backpack leaf blower, handheld blower, brushcutter, fire ball 1.3 kg, 7.5 hp solar submersible pump, 10 hp solar submersible pump, 15 hp solar submersible pump

Central Government/Public Sector

CTN :40402722

10 Jun, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of wall clock , telephone unit , office chair , executive chair , rechargeable led portable lamp , fire extinguisher co2 cap 06 kgs , led tv , fire extinguisher dcp 04 kgs , electrical food warmer , air conditioning unit , vacuum cleaner 220 230ac dc with accessories , drill machine make bosch gsb 550 , 12 digit pocket calculator , camera 35mm zoom with carrying case and accessories , machine weighing 150 kgs , water purifier , air blower , refrigerator double door with voltage stabilizer 300 ltrs capacity , pa system with accessories , led projector with smart screen , ceremonial lifebouy , water cooler capacity 150 ltrs , sunglasses , toaster , induction cooktop , air purifier , bicycle complete , bucket w 1 fire galvanished , cub board steel large , fire extinguisher afff 9l

State Government

CTN :40435240

29 May, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230a15 volts a/c), stirring capacity: 50-1500 rpm, capacity of stirrer: 2 litre, plate size: 18.4x18.4 cm(approx.), make & model: branded, bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is stan

Central Government And Public Sector

CTN :40362012

26 May, 2025 NA

Delhi - Delhi

Tender For repairing of tower window split ac - servicing of 1.5, 2.0 tr window a.c. units , installation of 1.5, 2tr window type a.c. in the existing window , repairing and testing of 1.5, 2.0 tr capacity window ac units removal of leakage , replacement of 1 8 hp double shaft fan, blower motor , providing and fixing of 3mm thick ply wood in the existing window , supplying fixing of running capacitor 45 mfd 50mfd , supplying fixing of pcb repairing for remote control , supplying fixing of sitc of new pcb for remote control , supplying fixing of thermostat , supplying fixing of condenser fan blade , supplying fixing of 15,16 amp. pin plug top , supplying fixing of starting capacitor 120 150 mfd , supplying fixing of copper wiring kit , supplying fixing of synthetic filter , supplying fixing of blower for window ac , supplying fixing of selector switches , supplying fixing of starting relay , s fixing of 3 core 2.5 sqmm grade pvc insulated copper flexible cable , replacement of cooling coil 1.5, 2.0 tr window ac unit , replacement of condesnsing coil of existing 1.5,2.0 tr window ac unit , supply fixing of remote hand set , replacement of 1.5 tr capacity rotary sealed compressor , replacement of 2.0 tr capacity rotary sealed compressor , replacement of 1.5 tr capacity reciprocating hermetically compressor , replacement of 2.0 tr capacity reciprocating hermetically compressor , dismantling 1.5tr,2tr window ac unit , dismantling 1.5tr,2tr split ac unit , itc of 1.5, 2.0 tr split ac units at desired location , servicing of 1.5,2.0 tr split a.c. units , repairing and testing of 1.5,2.0 tr capacity split ac unit , replacement of 1 by 8 hp condenser fan motor , replacement of 1 by 4 hp condenser fan motor , replacement of 1 by 35 hp indoor blower motor , replacement, fixing of copper wiring kit , replacement , fixing of condensor fan blade , replacement fixing of pcb repairing for remote control , replacement,fixing of sitc of new pcb for remote control , replacement, supply, fixing of remote hand set , s, fixing 20 mm dia pvc drain pipe in recess , sfixing pvc flexible pipe to cover the refrigerant pipes , pdg. and installing size 22 gauge of 1 4 inch size nominal dia , pdg. and installing size 22 gauge of 5 8 inch size nominal dia , replacement of condesnser coil 1.5, 2.0 tr split ac unit , replacement of cooling coil 1.5, 2.0 tr split ac unit , replacement of existing faulty, unseriviceable 1.5 tr indoor units , s fixing of ms frame a 40mmx40mmx5 mm ms angle iron , b 40mmx5mm ms flat , sfixing of powder coated prefabricated wall floor mounting stand , repairing of inveter type split ac a 1.5 tr inverter sac pcb card , b 1.5 tr inverter sac outdoor motor , c 1.5 tr inverter sac indoor motor , shifting and reinstallation of 3 phase tower type split ac unit , sitc of vaccumization and nitrogen testing a 12.7 mm dia. , b 19.10 mm dia. , sfixing of control cum transmission wiring a 4c x 4 sqmm , sfixing of pvc insulated pvc sheathed copper conductor , sfixing fp sheet steel 25 32 a 415 v c curve fp mcb , minor civil existing brick stone rcc wall having approx. thickness of 1 metre for fixing , providing and filling of refrigerant r 410 r 32 as required gas , pfixing of gi frame tray of 24 guage of size 3feetx1.5 feet , supply and fixing of ac changeover sequence

State Government

CTN :40390447

02 Jun, 2025 8.88 Lacs

Multi City - Karnataka

Tender For procurement of tools - extension bar 1/2inch, sludge hammer 14lb, allen key set 3 mm to 28 mm, portable hand drilling machine, jigsaw blade t121af, jigsaw blade t118b, bosch cutting machine, magnetic drilling machine, heavy duty grinding machine, screw driver 824, hand vice groz hv/125, des sledge hammer 8 lbs, bench drilling m/c, item name grinding machine 4 inch, jigsaw machine, long neck strt grinding m/c, angle grinder 100mm size, adjustable wrench set, heavy duty bench vice 300mm, spec bearing puller(5tonne,3leg), spec bearing puller 14 inch, spec bearing puller(2tonne,3leg), item name 3 jaws bearing puller set, sq drive 19mm hex adaptor 1 inch, spec sq drive 14mm hex adaptor 1 inch , spec circlip plier (int & ext), spec circlip plier extrnal 9 inch bent jaw, spec circlip plier internal 9 inch st jaw., blower , industrial, flaring tool, flaring tools id 37.5mm, sledge hammer 16lbs, ratchets 1 inch, ratchets 3/4 inch, revers. ratchet 19mm sq drive, bi hexagon box spanner set, spec slugging ring spanner 75mm, spec slugging ring spanner 41 mm, spec slugging ring spanner 30 mm, spec slogging offset spanner 75 mm, spec slogging ring spanner 55 mm, spec slugging ring spanner 46 mm, spec slugging ring spanner 36 mm, spec slugging ring spanner 70 mm, spec slugging ring spanner 60 mm, spec slugging ring spanner 50 mm, spec slogging ring spanner 65 mm, tubular spanner 6mm to 32mm, ratchet(reversible) size 1/2 inch, exel hexagonal socket set, spec slugging open end spanner 34mm, spec slugging open end spanner 32mm, spec slugging open end spanner100mm, spec slugging open end spanner30 mm, open end slugging spanner 95mm, spec slugging open end spanner 90 mm, single ended spanner 55mm, spec slugging open end spanner 77mm, spec single end d spanner 65mm, spec slugging open end spanner 58mm, spec slugging open end spanner46 mm, spec slugging open end spanner 36mm, open end slugging spanner 85mm, spec single end spanner 80 mm, spec slugging open end spanner 70mm, spec slugging open end spanner 60mm, spec slugging open end spanner 67mm, spec slugging open end spanner 50mm, cutting pliers (taparia), item name pneumatic impact wrench, bi hexagonal socket set, torque wrench 7 kg m to 35 kg m, torque wrench 5 kg m to 23 kg m, heavy duty hexagonal sockets, chain wrench heavy duty 36 inch, pipe wrench 30 inch, adaptor (3/4 inch 1/2 inch ), half round files (smooth) 12 inch , triangular files smooth 12inch, triangular files rough 12inch len, round files (rough) 12inch len, half round files rough 12 inch, flat files (smooth) 1inch x 12 inch, flat files (rough) 1inchx12inch, long feeler gauge 12 inch, feeler guage set 0. 05 to 1 mm, pitch gauge 1/64 inch to 3/8 inch, pitch gauge 0 .25 to 10 mm, engineers square 300 mm, engineers square 150mm, spirit level 1000mm length, dial gauge 0(point)01 to 5mm, lever type dial gauge, dial gauge with magnetic stand, item name steel rule 600mm, radius gauge, vernier caliper 0 to 280mm, outside micrometer 300mm to 400mm, spec hss cobalt grade m33 tap set, spec hss cobalt grade m30 tap set, spec hss cobalt grade m27 tap set, spec hss cobalt grade m24 tap set, spec hss cobalt grade m22 tap set, spec hss cobalt grade m6 tap set, spec hss tap set m18, spec hss tap set m16, spec hss tap set m14, spec hss tap set m12, spec hss tap set m10, spec hss tap set m8, spec hss tap set m5, des hss tap set m4, adjustable tap handle, outside calipers, inside spring calipers 600mm, extension bar 1763, pipe wrench 24 inch, extension rod 3/4 inch, spe hssdrill bit set

Corporations And Associations And Others

CTN :40437546

28 May, 2025 NA

Panipat - Haryana

Tender For rc for electricals consumables - 1cx1.5sqmm flexible wire, filonix/polycab, 1cx2.5sqmm flexible wire, filonix/polycab, 2cx1.5sqmm flexible cable, filonix/polycab, 3cx1.5sqmm flexible cable, filonix/polycab, 3cx2.5sqmm flexible cable, filonix/polycab, 3cx4sqmm flexible cable, filonix/polycab, 3cx1.5sqmm cu armd. cable, filonix/polycab, 3cx2.5sqmm cu armd. cable, filonix/polycab, combination plier 1621-8, make-taparia, line tester 813, make-taparia, insulation screw driver 939 300mm, make-taparia, d spanner set 6-32mm, make-taparia, ring spanner set 6-32mm, make-taparia, screw driver bit set bs80 (80 pcs), make-taparia, screw driver h903 2in1 10, make-taparia, internal circlip plier strength nose 1443-7c, make-taparia, extenal bend nose circlip plier1444-7, make-taparia, wire stripper 6", make-taparia, bearing puller for ceiling fan bearing, make-taparia, hydraulic bearing puller, make-taparia, insulation tester (meggar) 1000v 0-1000m ohm, model- cie444, insulation tester(meggar) 100-5000v 0-5000m ohm, model-6350in htc, digital multimeter model - 15b, make- fluke, clamp meter 1000a fluke 305, make- fluke, clamp meter 400a fluke 302+, make- fluke, 1" painting brush, 2" painting brush, 3" painting brush, 4" painting brush, steel wire brush 4 , air blower 750w 16000rpm 2speed model 77750, make- raliwolf, 9w led bulb, make- crompton/phillips, 21w led bulb, make- crompton/phillips, 24w pt bulb 230v, make- crompton/phillips, 36w led batton 220v, make- crompton, 36w 2x2 recess mounting led panel, make- 36w led recess panel c&s, 40w led well glass, make- crompton, 100w pt bulb, make- bajaj/phiilips, 120w street led light, make-ltessr120wled c&s, 200w led high bay light hanging type, make- c&s/bajaj, 300wled light model llfl300p, make- crompton, 400w hpsv flood light, make- crompton/bajaj, 1 switch-socket board heavy duty, make- bajaj/abb, 2 switch-socket board heavy duty, make- bajaj/abb, hand lamp holder,, pt holder , make- bajaj/phiilips, pendant holder, make- bajaj/phiilips, pvc tape, make- steelgrip, 6a switch modular, make- anchor, 6a socket modular, make- anchor, 16a switch modular, make- anchor, 16a socket modular, make- anchor, fan ragulator modular, make- anchor, 6a switch, make- anchor, 6a socket, make- anchor, 16a switch, make- anchor, 16a socket, make- anchor, 6a 2pin male female connector, make- anchor, 6a 3pin top, make- anchor, 16a 3pin top, make- anchor, black screw 1", black screw 1.5", black screw 2", wooden board 5x8", sunmica sheet 5x8", exhaust fan 12" 230v, make-crompton, exhaust fan 15"230v, make-crompton, exhaust fan 24" 415v, make-crompton, ceiling fan 48", make-crompton/orient, 2.5mfd capacitor,, 6mfd capacitor, pvc clip 2.5mm, pvc clip 4mm, pvc gitti 2", pvc cable tie 24", pvc cable tie 18", gi nut bolt with washer 5x10mm, gi nut bolt with washer 5x25mm, gi nut bolt with washer 6x25mm, gi nut bolt with washer 6x40mm, gi nut bolt with washer 6x50mm, gi nut bolt with washer 6x65mm, gi nut bolt with washer 6x100mm, gi nut bolt with washer 8x25mm, gi nut bolt with washer 8x40mm, gi nut bolt with washer 8x50mm, gi nut bolt with washer 8x65mm, gi nut bolt with washer 8x75mm, gi nut bolt with washer 8x100mm, gi nut bolt with washer 8x120mm, gi nut bolt with washer 8x150mm, gi nut bolt with washer 10x40mm, gi nut bolt with washer 10x65mm, gi nut bolt with washer 10x100mm, gi nut bolt with washer 12x50mm, ht nut bolt with spring washer 6x65mm, ht nut bolt with spring washer 6x100mm, ht nut bolt with spring washer 8x25mm, ht nut bolt with spring washer 8x40mm, ht nut bolt with spring washer 8x65mm, ht nut bolt with spring washer 8x100mm, motor cooling fan for 2.2kw 1440 rpm frame size 100l motor make siemens, motor cooling fan for 3.7kw 1440 rpm frame size 112m motor make siemens, motor cooling fan for 5.5kw 1440 rpm frame size 132s motor make siemens, motor cooling fan for 15kw 1440 rpm frame size 160 motor make siemens, motor cooling fan for 15kw 970 rpm frame size 180l motor make siemens, motor cooling fa

corporations/Associations/Others

CTN :40430077

28 May, 2025 NA

Noida - Uttar Pradesh

Tender For auction sale of scrap door and trunks , steel, plastic and glass,rubber (pcb category),fabric waste,plastic scrap (pcb category),tyres with/without rim : 4w,scrap seats : 4w,scrap seats mix,mix steel with chassis,mix differential, leaf suspension steel,scrap compressor,scrap cut seat belt,scrap steering column,scrap lights (pcb plastic category),scrap ewaste (pcb category),scrap alternator / startor,scrap wiring,scrap inflator cloth,scrap blower motor ,wiper, radiator fan etc,scrap fuel pump,scrap shocker -4w,scrap defaced abs,scrap battery with acid,tyres without rim : 2w,tyres with rim : 2w,scrap bales steel,scrap engine : 4w,scrap radiator , condenser with pipe,scrap - rear hub / foot rest -2w,scrap gear shifter/ accelerator paddle / hand brake lever

Fan Coil Unit Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors