Latest fan motor spares Tenders | Government fan motor spares Tenders

Corporations/Associations/Others

CTN :45312876

08 Jun, 2026 6.00 Lacs

Multi City - Karnataka

Tender For procurement of essential materials like submersible motor pump set, starters, cables and etc for tmc mahalingpur water supply section

State Government

CTN :45319926

08 Jun, 2026 7.00 Lacs

Hanumangarh - Rajasthan

Tender For maintenance work of submersible motor pump set to maintain water supply under various rwss sub division tibbi

State Government

CTN :45319935

08 Jun, 2026 3.50 Lacs

Hanumangarh - Rajasthan

Tender For maintenance work of submersible motor pump set to maintain water supply scheme under uwss sub division tibbi

Central Government/Public Sector

CTN :45299898

13 Jun, 2026 49.00 Lacs

Raigad - Maharashtra

Tender For repair / maintenance and replacement of defective parts of water supply pump/ motor set submersible motor and pump sets bore well / dug well pumps rewinding to pump motor painting works including cleaning of under ground sump ug sumps and allied

State Government

CTN :45303639

06 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates of plant and machinery and materials category items for preparation/amendment of schedule of rate for the year 2026. - m 1055 - pumps supplying submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump., submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 1 h.p. , 1.5 hp, 2 hp, 2.5 hp, 3.0 hp, 4.0 hp, 5.0 hp, submersible pump 150 mm dia (with bronze/ss impeller) up to 8 stages, 1.5 hp, 2.0 hp, 3.0 hp, 4.0 hp, 5.0 hp, 6.0 hp, 7.5 hp, m 1056 - pressure guage providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint, pressure gauge (100 mm dia), pressure gauge (150 mm dia), vacuum / combination gauge, m 1057 - lifting equipment chain pulley block supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark., 1 tonne capacity, 2 tonne capacity, 3 tonne capacity, electric operated circular or rectangular travelling crane (single girder) supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block., 5 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, 7.5 tonne capacity, above 6 m upto 8 m span, above 8 m up to 10 m span, 10 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, m 1058 - lightening arrester, ab switch, insulators, lightening arrestor supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line., suitable for 11 kv supply, distribution class, suitable for 22 kv supply, distribution class, suitable for 33 kv supply, station class, disc insulator. supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, pin insulator supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, air break switch without earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps, suitable for 11kv line, rocking / tilting type, rotating type, suitable for 33kv line, rocking / tilting type, rotating type, air break switch with earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for op

corporations/Associations/Others

CTN :45305644

10 Jun, 2026 NA

Kolkata - West Bengal

Tender For supply,delivery fitting-fixing of spare parts along with overhauling of eight nos 3hp submersible pumps for emergency use during shut down related work under grww - .cost for motor rewinding. , supply of o-ring, , supply of bearing-upper, , supply of bearing-lower, , supply of oil-enclo 48, , supply of diffuser., , supply of mechanical seal, , supply of 3core power and control combined pvc cable, , supply of grommet(set), , supply of lower stud-ss.., , .supply of upper stud-ss., , .supply of oil bag., , supply of water plate, , supply of impeller, , charges for dismantling, testing & commissioning of pump

State Government

CTN :45146120

25 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - 3 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 3 h.p. submersible pump set with column pipe from bore well, cost towards rewinding and repairing of 3 h.p submersible motor with s/f suitable winding wire, bronze bush etc. all complete after the deduction of cost of scrap materials., cost towards repairing of 3 h.p. submersible pump with s/f bronze impeller as per size and sample, bush, thrust plate, pump shaft etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 40 mm dia. upvc column pipe., cost towards supplying and fitting (1) 40 mm dia g.m. full way valve 1 no (2) 40 mm dia nr valve 1 no (3) 40 mm dia g.i. bend 2 nos. (4) 40 mm dia m.s. clamp with nut bolt 2 pair after the deduction of cost of scrap materials., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., supplying and installation suitable size panel board for 3 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., providing all labour, tools tackles and technicians for lowering of 3 h.p submersible pump set with all accessories in the bore well, 5 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 50 mm dia. upvc column pipe., supplying and installation suitable size panel board for 5 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., providing all labour, tools tackles and technicians for lowering of 5 h.p. submersible pump set with all accessories in the bore well, 7.5 h.p. submersible set -, providing all labour, tools, tackles and technicians for taking out 7.5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 7.5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 7.5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., providing all labour, tools tackles and technicians for lowering of 7.5 h.p. submersible pump set with all accessories in the bore well, transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., provision for leakage repairing of different size of upvc sch- 80 pipe in place of existing / cracked and damaged pipe of isi approved make or equivalent make damaged pipe in trenches and replacement of pipe and fitting so as to give 1 m average cover over the socket of pipes with disposal of exc

Central Government/Public Sector

CTN :45246584

01 Jun, 2026 NA

Gaya - Bihar

Tender For auction sale of others - scrap miscellaneous items (1)pvc aluminium wire off size (20.6kg), al-18.1kg (2)pvc armerd aluminium cable off size,4623 meter, fe-237.62kg, al-2263.48kg (3)scrap deseret cooler, 25nos, fe-525kg, cu-7.75kg (4)scrap deseret cooler plastic body, 6nos, fe-12kg, cu-1.8kg (5)capacitor off size, 495nos, cu-0.99kg, al-1.485kg (6)honda diesel generator set 1.5kva, 13nos, fe-455kg, cu-65kg, al-156kg (7)stablizer 3kva-5kva, 30nos, fe-120kg, cu-30kg (8)u.p.s 0.5kva & 1kva, 5nos, fe-7.5kg, cu-2.5kg (9)u.p.s 2kva, 2no, fe-6kg, cu-2kg (10)u.p.s 3kva, 6no, fe-24kg, cu-9kg (11)u.p.s 5kva,1no, fe-5kg, cu-1.6kg (12)submersible pump motor 20hp, 5no, fe-370kg, cu-17.25kg (13)submersible pump motor 12.5hp, 1no, fe-35kg, cu-2.1kg (14)submersible pump motor 5hp, 1no, fe-20kg, cu-1.6kg (15)insect killer fitting, 20nos, fe-70kg, cu-1kg (16)igniter off size, 10no, fe-0.5kg, cu-0.03kg (17)led torch, 23no, fe-0.115kg, cu-0.138kg (18)released 4 pole contactor, 2no, fe-0.04kg, cu-0.1kg (19)difective change over switch, 3no,fe-2.7kg, cu-0.15kg (20)released led fitting off size,43nos, cu-0.043kg, al-0.387kg (21)released led lamp 18watt, 5no, cu-0.005kg, al-0.015kg (22)main switch off size, 6no, fe-9kg, cu-0.18kg (23)mh fitting 2¿400 w, 6no, fe-0.3kg, cu-0.54kg, al-6kg (24)scrap led fitting 1¿28 watt, 10no, fe-1.5kg, cu-0.05kg (25)pvc aluminium wire off size meter, 1710meter, al-31.2kg (26)mcb off size, 19no, fe-0.304kg, cu-0.19kg (27)energy meter, 32no, fe-2.08kg, cu-2.912kg (28)pedeastal fan, 2no, fe-3kg, cu-0.6kg, al-0.6kg (29)pannal light 2feet ¿ 2feet, 18no, fe-3.6kg, cu-0.012kg (30)release mccb 200 a, 1no, fe-0.07kg, cu-0.05kg (31)release mccb 400 a, 2no, fe-0.16kg, cu-0.14kg (32)control pannel (stater) 10hp, 4no, fe-8kg, cu-0.6kg (33)defective oil circuit breaker, 3no, fe-120kg,cu-28.5kg (34)scrap copper plate & other copper item, cu-223.35kg (35)release pll fitting, 4no, fe-0.12kg, cu-0.008kg, al-0.8kg (36)scrap led street light 25 watt, 146nos,fe-4.38kg, cu-0.146kg, al-29.2kg (37)scrap led street light 45 watt, 12no, fe-0.36kg,cu-0.012kg, al-3.6kg (38)geyser off size,10no, fe-50kg, cu-0.5kg (39)main bearing std-05nos, cr bearing std-04nos, thurst washer-02nos, cylinder liner-04nos, piston assembly-04nos, set piston ring-04nos, conrod bush-04nos, volve injet-04nos, volve exhoust-04nos, volve seat intel-04nos, volve seat exhaust-04nos, volve guide-08nos, water pump assembly-01no, turbo repkite-01no, rocker lever-01no, set of jaint-01no, set of 0 ring-01no, set of old sealing washer-01no, set of houses-01no, fuil filter alement-01no, lub oil filter-02nos, oil seal fly head-01no, oil seal head-01no, v belt-02no, upper houseing bush-32nos, protection sleve-49nos, lop switch-01no, head rep-04nos, self stater pinion-01no, 1set, fe-35kg, cu-0.5kg, al-1.9kg, brass-0.05kg (40)cls panel, 10nos,fe-300kg, cu-21kg (41)m/s angle & other items, fe-1700kg (1-41)lot no-ph store/gaya/04, (1-41)location-ph/store/gaya

State Government

CTN :45275288

28 May, 2026 NA

Delhi - Delhi

Tender For maintenance of sewer system in ac-03 (phase-08) - hiring charges of 30 hp sewage pump/submersible pump set in ac-03 in manhole line along with pump for sewage application with electric motor. base frame, motor starter delivery/suction line(dia= 100 mm and length 250 meter). nrv, bends, flanges. laying of wiring from electric meter to pump-set approx. 350 meter with wire as per site requirement etc at timarpur oxidation pond. hiring of labour at site for operation, watch and ward of sewage pump set/ submersible set.

State Government

CTN :45300135

04 Jun, 2026 12.00 Lacs

Navalgarh - Rajasthan

Tender For annual rate contract for repairing and rewinding work of submersible pump set and unlowering/ lowering of submersible motor pump set from existing tube wells under phed jen section mukundgarh sub dn nawalgarh

Fan Motor Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors