Latest fatigue tester Tenders | Government fatigue tester Tenders

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

CTN :45318187

15 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of relacment method , compaction test equipment both 2.5 kg and 4.5 kg rammers , cbr moulds 150 mm dia -175 mm ht. , 150 mm x 300 mm ht. cylinder with capping component , riffle box , soaking tank for accommodating 6 cbr moulds , speedy moisture meter complete with chemicals , standard measures of 30, 15 and 3 litres capacity alongwith standard tamping rod , distant reading thermometer 0 degree c 250 degree c , sand pouring cylinder with conical funnel and tap and complete , gi seive set 125,90,75, 63,53,45,37.5, 14, 13.2,12.5,11.2,10,9.5,5.6,4.75mm , water still 20 ltr capacity , glass beakers borosilicate 4 nos of 100 cc, 200 cc, 500cc, 1000cc capacity , pentrometer with standard needles , platform balance 300 kg capacity , drying ovens. thermostatically controlled 100 degree c to 110 degree , water bath electrically operated and thermostatically controlled , dial gauge 25 mm travel -0.01 mm or division , aiv testing apparatus complete set , is sieve sets 450 mm internal dia with lid and pan 30 sieves in 1 set , sieves 450 mm internal dia of sieve sets as per bis of required sieve sizes , is brass sieve sets 200 mm internal dia with lid and pan 35 sieves in 1 set , sieves 200 mm consisting of sieve set of required sieve sizes with lid and pan , is sieve 75,53,45,22.4,11.22 6.5,9.50,5.6,4.75,2.36,1.18mm , soxhlet extraction or centrifuge type apparatus , oven electrically operated, thermostatically controlled including thermometer , sieve shaker capable of shaking 200 mm operated with time switch , weight machine 30 kg electronic type , high frequency mortar cube vibrator for cement testing , specific gravity apparatus , rapid moisture meter is 12175 1987 , flash and fire point apparatus , ductility testing apparatus electrically operated , density testing machine complete set bucket method , rebound hammer concrete testing hammer , furol viscometer , sand equivalent test apparatus , standard sand for density test , lab cbr testing equipment for conducting cbr testing 5 tonne cap , unconfined compression test appratus , marshal stability test machine , los-angeles abrasion test apparatus as per is2386 part4 1963 , accelerated curring tank having cap to accom 6 12 18 concr cube 150mm , big size oven electrically operated, thermostatically controlled , bitumen extractor, hand operated, bowl capacity 1500 gms bitumen, supplied , bitumen laboratory mixer including required accessories 20 ltrs , rebar locator , digital compression testing machine , automatic asphalt content meter self recording rain gauge, maximun minimum thermometer digital, screw gauge, prismatic compass with stand, auto/dumpy level with stand and staff, abney level, robotic total station 1 inch accuracy bluetooth auto target, kerosene or gas stove or electric hot plate, ghat tracer, pegging rod, optical square 90 degree, ranging rod 3 mtr long, high precision binacular, temperature gun for checking bituminous surface works, sample tray enamelled, vibrating wire, termperature sensor, portable indicator, steel tape 5m, standard pyconometer of 50 ml, digital hygrometer, post hole auger with extensions, rodo meter - high precision wheel odometer , hot plates 200 mm dia (1500 watt.) voltage 220v to 230v, circular plates of 250 mm dia, sampling pipettes fitted with pressure and suction inlets, 10 ml capacity., sampling tins with lids 100 mm dia x 75 mm ht 500 gms capacity , electronic digital micrometer, ennore standard sand (25 kgs bag ), weighing machine 0 kg to 10 kgs, mould (15cmx15cmx15cm) for compressive strength of concrete, digital vernier calipers (accuracy 0.001 mm), thermometers mercuryinglass //bid details 2 / 74

CTN :45224098

03 Jun, 2026 NA

Kinnaur - Himachal Pradesh

Tender For corrigendum : supply of supply of gravel granular gsb 250mm 125mm low grade aggregates , supply of geo textile of size 4 point 5mtr x 100rm over gsb with min 300mm stone aggregate as in drain , supply of geo grid of size 4 point 5mtr width x 100rm below gsb with min 300mm stone aggregate as in drain , opc 53 grade cement , sand for coping , aggregate 20mm , supply only fine sand , supply only water based prepolymer urethane , supply of paver block siz 225mm x112 point 5mm x100mm , rubber hammer , brick trawel , pan mortar std size , hand gloves rubber , digital compression testing machine , spacer clips , special mask for chemical laying , wire mess for seiving sand 8 feet x 5 feet , phawrah with handle make , measuring tape 5 m ai 16 , water level pipe 30mtr roll , mason thread 100 mtr long roll , sprit level 10 inch , broom sticks , concrete saw electric

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

CTN :45138827

28 May, 2026 NA

Barmer - Rajasthan

Tender For supply of s and f of ring main system for wss - supplying laying jointing commissioning and testing 100mm bore centrifugally cast spun ductile iron pressure pipe with spigot and socketed ends class k7 confirming to is 8329 or 2000 as per atc , supplying laying jointing commissioning and testing 150mm bore centrifugally cast spun ductile iron pressure pipe with spigot and socketed ends class k7 confirming to is 8329 or 2000 as per atc , supply and fix valve reflux with by pass arrangement 100mm 4 inches dia , supply and fix foot valve confirming to is 4038 100mm 4 inches dia , supply and fix valve sluice flanged of class 1 point 6pn 100mm 4 inches dia , supply and fix valves sluice flanged of class 1 point 6 pn 150mm 6 inches dia , supplying installing testing and comissioning of centrifugal pump electric driven capacity not less than 25 lps discharge at 60 metre head in load as per atc , supply laying testing cable xlpe insulated screened pvc bedded galvanized steel strip wire armd electric powercable hd 1100v grade stranded aluminium conductor size 70 sqmm 3 point 5 core , supply laying testing cable xlpe insulated screened pvc bedded galvanized steel strip wire armd electric powercable heavyduty 1100v grade stranded aluminium conductor size 10 sqmm 4 core , supplying installing testing and commissioning of outdoor type factory made crca sheet thickness 3 point 15mm platform mounted lt panel board to accommodate as per atc , supplying installing testing and commissioning of indoor type factory made crca sheet thickness 2mm platform mounted lt panel board to accommodate as per atc , supply install test commission centrifugal openwell submersible pump cap 10hp singlephase discharge range 740 to 200lpm head range 35 to 54m suction x discharge pipe dia 65x50mm as per atc , supply and fix cast iron air valves with two air outlets 80mm dia bore and fixing up in ) /bid number : gem/2026/b/7514655 * /dated: 08-05-2026 & & / bid document 1 / 21 & & ' ' /item category cast iron water supply mains , excavation in tranches not exc 1 point 5m wide n exc 1 point 5m depth over exc 10sqm on plan and n exc 1 point 5m in depth for foundations shafts wells cesspite mainholes pier holes as per atc , returning filling in including spreading laveling watering and well ramming in layers n exc 25cm in soft or loose soil complete all as specified and directed by engr in charge , removal of excavated soil material to a distance not exc 50m or depositing where directed at a level not exc 1 point 50 metre above th staring point complete all as specified as per atc , boring of hole under road pavement hardstanding by trenchless technology using ultra sounding technique nec machine incl hdpe pipe 150mm dia suitable for 0 point 4mpa working pressure , cutting existing ci or di pipe line of 150mm and inserting tee of size 150 x 150 x 150mm for taping complete all as specified and directed note tee 150 x 150 x 150mm paid separetly in di special , cutting existing ci or di pipe line of 150mm and inserting tee of size 150 x 150 x 100mm for taping complete all as specified and directed note tee 150 x 150 x 100mm paid separetly in di special , di or ci special such as tee bend collar tail piece and other fitting as required , earthing of poles and other machinery or equipment using 4mm gi wire as earthing lead and ms galvanized plate of size 60cm x 60cm x 6mm as earth electrode , demolition and diasmanttling of concrete in ground floor and pavings n exc 15cm thickness , m and l of cement concrete b 2 1 colon 2 colon 4 40mm graded aggregate 100mm thickness , m and l for contruction of brick masonry valve pit in repair of inter size 90x90x90cm incl nec exc earth work in soft or loose soil brick work plastering white wash pcc coping ms frame as per atc , m and l for contruction of brick masonry valve pit in repair of inter size 120x120x90cm incl nec exc earth work in soft or loose soil brick work plastering white wash pcc coping ms frame as per atc

CTN :44914613

30 Apr, 2026 4.83 Lacs

Mainpuri - Uttar Pradesh

Tender For corrigendum : providing of design installation and maintenance of educational lab/centre - science lab; equipment supply & installation in concrete & transportation lab in civil department; buyer - flexural test for tiles testing machine , pavement intensity test apparatus

CTN :44856128

02 May, 2026 19.93 Lacs

Chandigarh - Chandigarh

Tender For supply of qcc lab items d d - pensky martens apparatus , compressive testing machine , needle concrete vibrator , sieve shaker machine , tamping rod

CTN :44721037

11 Apr, 2026 NA

Barmer - Rajasthan

Tender For supply of providing and laying rcc m20 concrete , waterproof cement painting works , supply and installation of acp vinyl sign boards , slogan artwork and hpcl logo painting , vinyl replacement work on existing acp boards , supply and installation of backlit flex boards , granular sub base work , wet mix macadam road work , thermoplastic road marking work , providing and laying 80mm paver block flooring , supply of 4 inch 150 gate valve , supply of double hydrant post is 5290 , supply of frp hose box cabinet , supply of 63mm fire hoses 15m length , supply of jet nozzles with branch pipe , supply of landing valves for hydrant system , supply of 4 sqmm copper earthing cable , stenciling work below 2 inch , stenciling work 2 inch to 4 inch , supply of 12mm ss bolts with nuts and washers , supply of 10mm ss bolts with nuts and washers , supply of 25mm rubber mats for cylinder handling , supply and fixing of precast kerb stones , supply of pressure gauge testing kit , supply of hydrant hose testing kit , supply of lpg hose testing kit , relay testing and thermography of electrical panels , porta cabin flooring repair work cement sheet and pvc carpet , porta cabin interior repair work plywood with lamination , painting work for porta cabin , supply and fixing of zebra blinds , supply and installation of 1.5 tr split air conditioners , supply and installation of 2.0 tr split air conditioners , fabrication and installation of sliding gate parking shed structure , servicing and maintenance of industrial valves , supply and plantation of 4 to 6 ft plants , grass lawn development work , supply of high back revolving chairs , supply of visitor chairs cantilever type , supply of safety belts , supply of industrial l3 managed network switch , supply of 40g sfp modules , supply of 10g sfp modules , supply of 1g sfp to rj45 converter , supply of flow meter , micro grading of ground surface , supply and installation of 150 lph water cooler , supply and installation of ro water purifier , hiring of hydra crane 10 to 14 ton capacity , hiring of tractor with operator , hiring of jcb machine with operator , supply and installation of mitsubishi plc analogue output card

CTN :44726681

08 Apr, 2026 2.29 Lacs

Ajmer - Rajasthan

Tender For supply of equipment and other materials to the lab operated at ganj godown municipal corporation, ajmer. - supply of core cutting machine (diesel/petrol) having specifications max core diameter 200 mm, power source diesel engine, drilling depth 600 mm, motor power 7.5 kw, suitable material concrete, asphalt, rcc, brick, operation mode semi automatic, having arrangement of water supply for test and fitted on wheels. , supply of compression testing machine, 2000kn digital, usage/application cube testing least count in kn 1, frequency 50 hz, automation grade automatic, weight up to 200 kg, motor voltage 240 to 440 v. , supply of core cutting instrument for soil density testing cutter: steel cylinder, 100mm internal diameter, 127.3mm long. accessories: steel dolly (25mm high), rammer. , supply and installation of bitumen testing machine bitumen content determination in bituminous mix having specification capacity 1500 gm, phase 1 phase, frequency 50-60 hz, voltage 220-240v, power source electric. , supply of steel trays having diamention 450 x 350 x 75 mm and heavy-gauge metal (often 18-22 gauge) with reinforced, polished or smooth surface. , supply of rapid moisture meter as per is 12175 specification. including all accessaries. , supply of rebound hammer it should consist of a spring controlled mass which slides on a plunger within a tabular housing, impact energy = 2.25 nm. , supply of scoop ss stainless steel with capacity 500 gm. and 1kg. , supply of digital laser distance meter , supply of vicat apparatus

CTN :41503639

30 Mar, 2026 NA

Pune - Maharashtra

Tender For bid to ras supply of upgradation of training lab - servo shake table , digital cbr appratus , electronicdata acquisition unit for single gang bench type for consolidometer appratus , ultrasonic pulse velocity tester , digital rebound hammer , automatic compression testing machine , concrete and transportation eqpt

Fatigue Tester Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government