Latest feeder panel board Tenders | Government feeder panel board Tenders

corporations/Associations/Others

CTN :45702242

07 Jul, 2026 17.03 Lacs

Kota - Rajasthan

Tender For regular operation and maintenance of street lights (with material) at all industrial areas under riico ranpur kota(for 2 years) - regular operation and maintenance of high mast light in ranpur , kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register shall be maintained at riico/association office and complaint lodged must be attended by contractor within 24 hours. the person deputed by contractor shall attend the riico/association office daily and comply the instructions and attend complaints regularly. iii contractor will have to employ trained and qualified electricians for the work. iv corporation shall not be responsible for any kind of accident during execution of work. v contractor will be responsible for safety and security of fixtures and all concerned materials. vi contractor will be responsible for arrangement of all t&p required for the work vii cost of all labour and material like lamp / balllast wire etc. will be born by contractor. all material required for the work shall not be below the category-ii of concerned bsr item. contractor has to repair and maintenance of fixture with material in all cases like short circuit, phase to phase of jvvnl line etc. viii no extra payment will be made for fixing/removal of extra/existing fixture in the industrial area. ix contractor will be responsible for timely collection and deposition of electric bills of areas in each month. in case of delay in payment and jvvnl impose surcharge for delay payment the same will be recovered from the running bill fo the contractor. payment of electricity bill will be made by riico. x contractor will be responsible for rebate of timer provided by jvvnl. hence contractor will maintain the on/off system by timer properly. in case no rebate is provided by jvvnl due to failure of timer then rebate will be deducted from contractor payment. xi contractor will be responsible for any theft of electricity through poles and he will make necessary arrangements for this. in case of any theft is found suitable penalty will be imposed on the contractor. xii contractor will maintain cubical panel board and assessories fitted in it. in case of any fault repair/replace of material will be done by the contractor at his own cost. no extra payment will be made on behalf of material. xiii contractor has to keep ready total fixtures. in case of fault of fixture a penalty of rs.100/- per fixture per day will be imposed on the contractor., regular operation and maintenance of street light fixtures hpsv/ hpmv (70w/150w) in ranpur, kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register sh

CTN :45723639

28 Jul, 2026 5.00 Lacs

Jhabua - Madhya Pradesh

Tender For inviting rate of stationery items for financial year 2026-27 - carbon paper packet (full size), carbon paper packet (half size), carbon paper packet (full size, blue), file tags (per packet), file laces (per packet), file cover (plain, per piece), file cover (super quality, per piece), writing pad (plain, per piece), writing pad (super quality, per piece), stamp pad (large, per piece), stamp pad (small, per piece), register (1-quire, per piece), register (2-quire, per piece), register (3-quire, per piece), register (4-quire, per piece), register (5-quire, per piece), register (6-quire, per piece), envelopes (large, 11x5, per hundred), envelopes (9x4, per hundred), envelopes (small, per hundred), stapler (small, kangaroo, per piece), stapler (large, kangaroo, per piece), stapler pins (small packet, kangaroo, per piece), stapler pins (large packet, kangaroo, per piece), paperweight (per piece), paper spike (per piece), gel pen (per piece), scissors (large, per piece), glue bottle (100g, per piece), glue bottle (200g, per piece), glue bottle (250g, per piece), glue bottle (400g, per piece), glue bottle (500g, per piece), glue bottle (700g, per piece), jk paper packet (a4 size, 70 gsm, per piece), jk paper packet (legal size, 75 gsm, per piece), cd case (per box), dvd case (per box), cd marker pen (per piece), plastic file cover (per piece), file with clip/strip (per piece), box file (per piece), table glass (large, 3x2) per piece, small table glass (2x2) per piece, folding desk pad per piece, pins (100g) per packet, pins (400g) per packet, t-shaped pins (100g) per packet, t-shaped pins (400g) per packet, scale per piece, large casio calculator per piece, small casio calculator per piece, dustbin per piece, mp government office diary per piece, mp government calendar per piece, measurement book per piece, tape (30m) per piece, table bell per piece, pin box per piece, paper tray per piece, doormat per piece, plastic notice board per piece, pencil packet per piece, paper stand per piece, pen stand per piece, cello brand fiber chairs per piece, cello brand stool per piece, tablecloth per meter, wall clock batteries per piece, highlighter marker pen per piece, flags per packet, calendar with image of goddess lakshmi per piece, large candle packet per packet, small candle packet per packet, cello tape per piece, binding cloth (latha) per meter, a4 size photocopy (mains electricity) per piece, a4 size photocopy (generator) per piece, rubber stamp making per piece, office cupboard with drawers per piece, office table per piece, locks per piece, attendance register per piece, inward register (4-quire) per piece, outward register (4-quire) per piece, accounting cash book (300 pages) per unit, cashier's cash book (300 pages) – per unit, income ledger – per unit, expenditure ledger – per unit, attendance register – per unit, stock register (200 pages) – per unit, budget book – per unit, water tax register – per unit, property tax register – per unit, shop rent register – per unit, measurement book (200 pages) – per unit

CTN :45387837

02 Jul, 2026 NA

Dibrugarh - Assam

Tender For bid to ras supply of 2.5 kva gen set , ro filter without electricity , map india and world , solar lamp light , white board for class room , white board marker , skipping rope

CTN :45298008

01 Jul, 2026 NA

Parganas - West Bengal

Tender For bid to ras supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , supply and fixing on load change over switch ss enclosure complete with capacity 200 amp, 415 volt, 4 pole, 50 hz. , supply and fixing sheet metal enclosure spn db double door having facility to fix mcb spn as incomer and mcbs as outgoing, spn 4 ways, ip-43 , supply and fixing sheet metal enclosure tpn db double door having facility to fix mcb tpn as incommer and mcbs as outgoing tpn 4 ways, ip-43 , supply and fixing bus bar chamber 100 amp, 4 way, 415 volts enclosurre is made from crca sheet of thickness 3.15mm crca sheet cover , supply and fixing of straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade nominal cross sectional area not exc.50 sqmm, 3.5 by 4 core , supply and fixing straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade cross sectional area 240 sqmm to 300 sqmm, 3.5 core. , supply and fixing end termination epoxy cable joint kit including jointing materials for making joints of ug electric cable 1100 v grade nominal cross sectional area 240 sqmm to 300 sqmm, 3.5 core , supply and fixing of galvanised iron pipe 100 mm bore dia light grade for protection of ug cable , supply of digging nad layingg in excavation trenches not exc. 1.50 m wide and not exc. 1.50 m in depth, complete all as specified and directed. , returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft loose soil , supply and fixing of galvanised iron pipe 40 mm bore dia light grade for protection of ug cable , supply, installation, commissioning and testing including providing all necessary electrical connection,lt feeder panel board of size 1.0 m x 0.6 m x ) /bid number : gem/2026/b/7568567 * /dated: 22-05-2026 & & / bid document 1 / 30 & & ' ' /item category 0.5 m , supply, installation, commissioning and testing including providing all necessary electrical connections lt feeder panel board of size 0.6 m x 0.6 m x 0.5 m , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick.complete all as specified and directed in boq spec file , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick. complete all as specified and directed in boq spec file , supply and fixing of sub-class b brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for ug cable protection, complete all as specified and directed. , supply and fixing horizontal boring under a depth of 0.65 m from the gl for passing pipe upto 40 mm bore dia , supply of digging and laying of removing excavated materials soils not exc. 50 m and depositing where directed at a level not exc.1.50 m , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 300 sqmm including bricks, gi pipes etc. , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 50 sqmm 3.5 core including bricks, gi pipes etc. , supply of digging and laying of sand cushioning dry in trenches for protection of ug cables below, above and around the ug cable laid in trenches of 230 mm spread thickness , cutting road by hard standing and making good disturbed surfaces by using pcc type-c2,1-3-6 by using 40 mm graded stone aggregate , boring of holes under road,pavement,hard standing by trenchless technology using ultra sounding technique including hdpe pipe 150 mm dia suitable for 0.4 mpa working pressure , cutting chases, chipping in making good to facings, where required and pointing in cement mortar 1- 3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels etc. , submain wiring comprising single core 2 runs of 6 sqmm nominal coss sectional area frlh

CTN :45693976

17 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply and installation of training items for drone technician trade under craftsman training scheme (cts) at consignee locations - pliers, soldering station, multi meter, binoculars, anemometer, magnifier, unassembled drone kit, unassembled drone kit - standard with hd camera & thermal camera, electricity lab, smd technology kit with wall chart, dc regulated variable programmable dc power supply, drone workbench, analog-digital circuits development platform, applied mechanics training platform, drone battery management training systems, charge controller training system, bldc (brushless dc) motor training system, inverted pendulum, drone sensor trainer kit, antenna training system, advanced microwave integrated circuit lab, gps training platform, wireless communication modules, fcb and esc training platform, drone gimbal set with motor and control, npnt compliant micro uav built for mapping and surveillance, field repair kits, drones and spare parts kit, balance charger, power distribution board, laptop latest configuration, thrust measurement meter, indoor netted facility, outdoor controlled netted testing facility, various electronic and electrical components, 3d printer, drone ( long range)

State Government

CTN :45687577

03 Jul, 2026 7.00 Lacs

Jhunjhunu - Rajasthan

Tender For supply of feeder panel board

corporations/Associations/Others

CTN :45607270

27 Jun, 2026 42.02 Lacs

Manjhanpur - Uttar Pradesh

Tender For purchase fuse wire and ct0 under electricity distribution board-kaushambi kreason.

Central Government And Public Sector

CTN :45605542

20 Jun, 2026 NA

Bhubaneswar - Odisha

Tender For quotation for overlay and branding items 65th national inter state senior athletics championships 2026 flex & frame , vinyl branding , vinyl on sun board branding , pagoda tent (inclusive of carriage & labour charges for installation) 10x10 , pagoda platform , canopy tent , long table , photo finish riser , plastic chair , metal cushion chair , sofa(2-seater) , fridge , stand fan , extension board , barricading , que manager , 20mm grass mat , printer with xerox facility , walkie talkie , manpower for equipment movement , manpower for overlays movement , electrician , hostess , led screen for tsr (8`x6`) , riser for led screen for tsr (8`x4`) , led screen for fop (30`x20`) , riser for led (30`x5`) , scaffolding for led screen fop (30`x20`) , camera riser (8`x8`) , mic podium , photographer , videographer , 125 kva , running charges(125 kv)(running hr-10 hrs/day) , merchandise , t-shirt (volunteer) , t-shirt (to's) + 1 lower , bibs , poncho , track suit , lights & sound & others , pa system(fop) , operator for press conference , pa system (gathering point) with 2 base , 56" led tv with stand , high wattage metal lights , line array , water can with dispenser , water bottle 250ml , ice bath tubs , ice slabs , ice cube , ice box , electricity cabling at fop, practice ground, broadcast, media, etc , internet (upto 300 mbps) main & backup (fop, broadcast, call room & others) , flower bouqet big , paper glass , hand towel(dry cotton towel) , foot mat , board pin , carbon paper , xerox paper(a4) , surgical tape(1 inch) , cartridge , ball pen , celo tape.1" , micropore paper tape 1" (surgical tape) , micropore paper tape 2" (surgical tape) , drawing pin , clip board , clip file , double puncher , fevistick , guard folder , high lighter , permanent marker pen big each (red , black ) , white board markar pen (red , black & blue) , paper cutter natraj (small ) , pencil , safty pin small white (1000 pic x 25 pkt) , steel scale(12 inch) , single puncher , scissor (8 inch) , stapler pin big , stapler pin small , stapler big , stapler small , tag (big) , note pad (call room) no-3 , plastic packets with tightner (for call room) , housekeeping material (mix) , plasticine (putti) green colour , plastic cover folder for bib numbers , thigh number 1 to 8 ( 4 inch (height)/3 inch (width)sticket paper)- 200 set, 9-35 ( 4 inch/3 inch sticket paper)- 15 set , accreditation (generic pvc card with lanyard) , notepad , pen , register , nada room , notepad , pen , xerox paper(a4) , stapler small , stapler pin small , gum , hand towel , fridge , mirror , scissor , clip board , miscellaneous ,

CTN :45532685

26 Jun, 2026 15.00 Lacs

Shajapur - Madhya Pradesh

Tender For tender inviting item rate for purchasing of different item for operation and mantainance of electricity items for year 2026-27shujalpur - btc rad 24x2 watt, chock pleat 24x2 watt, chock pleat 4 rad, btc rad 40 watt, tub plet 40 watt chok, tub stater, led street light 30 watt, led street light 40 watt, led street light 50 watt, led street light 100 watt, led street light 200 watt, led bulb 5 watt, led bulb 10 watt, led bulb 12 watt, led bulb 18 watt, led bulb 20 watt, led bulb 40 watt, led street light chock, led street light led bulb sheet per watt, tubelight led 30 watt, fan 75 watt 1200 mm, cooler 150 watt plastic body, cooler 200 watt metal body, exhaust fan, extension board heavy, mcb 6a single pole, mcb 32a single pole, mcb 63a single pole, mcb 6a three pole, mcb 32a three pole, mcb 63a three pole, cut-out heavy, cut-out light, capacitor for fan, capacitor for mpeb meter connection per kw, moduler switch board 6 pin with switches, moduler switch board 8 pin with switches, moduler switch board 12 pin with switches, moduler switch board 16 pin with switches, bulb holder, earthing copper plate, earthing copper rod, wire aluminium 6mm 30 meter, wire aluminium 8mm 30 meter, wire aluminium 10mm 30 meter, wire aluminium 12mm 30 meter, wire aluminium 16mm 30 meter, wire copper 0.75mm 30 meter, wire copper 1.0mm 30 meter, wire copper 2.5mm 30 meter, wire copper 4mm 30 meter, wire copper 6mm 30 meter, copper wire cable 2 core 1mm, copper wire cable 2 core 2.5mm, copper wire cable 2 core 4mm, copper wire cable 3 core 1mm, copper wire cable 3 core 2.5mm, copper wire cable 3 core 4mm, aluminium cabel 2 core 8mm, aluminium cabel 2 core 10mm, aluminium cabel 2 core 12mm, aluminium cabel armoured 2 core 8mm, aluminium cabel armoured 2 core 10mm, aluminium cabel armoured 2 core 12mm, aluminium cabel armoured 3 core 8mm, aluminium cabel armoured 3 core 10mm, aluminium cabel armoured 3 core 12mm, tape glue per unit, tester per unit, plier per unit, wirecutter per unit, hatodi per unit, toolkit per unit, gps device including sim min 1 year plan for vehicle

corporations/Associations/Others

CTN :45443162

18 Jun, 2026 8.40 Lacs

Meerut - Uttar Pradesh

Tender For corrigendum : electricity distribution division&others] subdivision officer in the jurisdiction of meerut] electricity distribution subdivision ist@ii@iii in the jurisdiction of meerut] guarding of lines falling in the kaward road] earthing] resagging] placing plastic sheet up to 7 feet height on stp@pcc poles] signage board and barricading of transformers work to be done etc.

Feeder Panel Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

corporations/Associations/Others

Central Government And Public Sector

corporations/Associations/Others