Latest felt seal Tenders | Government felt seal Tenders

Central Government/Public Sector

CTN :45672680

04 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of 1 inch bsp ms hexagon nipple , 3 by 4 inch bsp ms hexagon nipple , 1 by 2 inch bsp ms hexagon nipple , 1 by 4 inch bsp ms hexagon nipple , 1 inch bsp f m.s 90 elbow , 3 by 4 inch bsp f m.s 90 elbow , 1 by 2 inch bsp f m.s 90 elbow , 1 by 2 inch bsp f ms coupling , 3 by 4 inch bsp f ms coupling , 1 inch bsp f ms coupling , 2 inch bsp f ms coupling , 1 inch bsp f ms tee , 3 by 4 inch bsp f ms tee , 3 by 4 inch bsp male plug , 1 inch bsp male plug , reducer bsp f 1 by 2 inch to 3 by 4 inch , reducer bsp f 1 inch to 3 by 4 inch , non asbestos gasket roll 3mm , non asbestos gasket roll 0.5 mm , felt seal , glass tube 1 od14, id11, length575 all , glass tube 2 od14, id11, length375 all , glass tube 3 od14, id11, length572 all , temperature gauge bottom mounting , pressure gauge bottom mounting , pressure gauge with built in capsule bot

Central Government And Public Sector

CTN :45642610

08 Jul, 2026 NA

Bangalore - Karnataka

Tender For bearing no. 22218k with plummer block sn-518 , sleeve no. h318, felt seal f/s 5/260 and locating ring as a set of make (skf/fag/rexnord/timken/ntn make only). note:- 1)bearing, plummer block and sleeve should be of same make 2) vendors are required to quote only for the brands they are approved for. 3) the authorized agents shall supply bearings with original nanufacturer tamper proof seal. 4) the authorized agents shall furnish inspection certificate from manufactures or their authorised testing agents, preferably incorporating the details of traceability of the products proposed for supply. 5) non compliance of any of the conditions by the tenderer may result in their offer getting ignored. no. of stages of inspection: 1 (excluding final lot inspection) description of stage-1 inspection: make and specification (as 100% of po qty.) warranty period: 12 month(s) from the date of supply [ warranty period: 12 months after the date ofdelivery ] ]

Central Government And Public Sector

CTN :45587859

01 Jul, 2026 NA

Angul - Odisha

Tender For felt seal for girth gear

CTN :45578496

06 Jul, 2026 NA

Bokaro - Jharkhand

Tender For supply of felt seal for axle box wag7 locos as per drg. no. a4/97/cnb/1351/5015/ab [ warranty period: 30 months after the date of delivery ] ]

CTN :45577412

30 Jun, 2026 NA

Kalyani - West Bengal

Tender For grease lubricated brg. hsg. no. saf-220 (de) with" y" efelt seal, provision to be kept for rtd fixin , grease lubricated brg. hsg. no. saf-220 (nde) with" v" felt seal, provision to be kept for rtd fixin , bearing h? using (c. i) sr type oil lub. - 120 mm dia. (bf ty pe for loc. ) , drg. no. : k-2755" a" , to suppli , bearing housing (c. i) sr type oil lub. - 120 mm dia. (bl type for non-loc. ) , drg. no. : k-2755" a" , to

Central Government/Public Sector

CTN :45279890

22 Jun, 2026 NA

Guna - Madhya Pradesh

Tender For corrigendum : tender for supply of bearing 2316 k , double row self-aligning ball bearing with tapered bore , bearing number - 2316 k with steel cage , make - skf , ntn or fag. , snl 519-616 plummer bearing block housing plummer bearing block housing assembly (one bearing block assembly consisting of 01 no. of snl 519-616 plummer block , 01 no. of h2316/pc sleeve , 02 nos. of felt seal and 02 nos. of locating ring) , bearing 2215 ektn9 double row self-aligning ball bearing with tapered bore , bearing number - 2215 ek with pressed steel cage , make - skf , ntn or fag. , snh 515 tl plummer bearing block housing plummer bearing block housing (one bearing block assembly consisting of 01 no. of snh 515 tl plummer block , 01 no. of h 315/pc sleeve and 02 nos. of locating ring) , bearing 29322-e1-xl spherical roller thrust bearing with stamped steel cage , bearing number 29322-e1-xl , make - skf , fag or ntn.

CTN :45532259

21 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply of mechanical and electrical equipments - supply - mechanical lab equipments, single phase ac circuit kit for voltage, current and power measurement- 5a,300v, 300w/5a measurement of power by using various loads analog voltmeter 0-300v ac panel mountedanalog ammeter 0-5a ac panel mountedanalog wattmeter 1.5kw ac panel mountedsingle phase digital power monitor to measure powersingle phase ac lamp load 230v/5a 1kwpanel enclosure with hylam front panel with input/outputterminal outlets , mcb elcb trainer kit- 1 phase/3 phase, 2/3/4 pole, 3a-16a single pole mcb 2-5ampstwo pole elcb 30malamp load single phase 5amps panel enclosure and terminal outlets, four stroke petrol engine cut section model - single cylinder four stroke petrol engine cut sectional model with carburetor, spark plug, cut cylinder, piston, connecting rod, crank shaft, valve mechanism, cam shaft, timing gears and flywheel. all parts cut opened to study the components and its working provision to take values for valve timing. surface finish: painted and color coded for easy identification of components mounting: heavy-duty ms fabricated stand/base display type: static / dynamic demonstrationmodel, dc motor - type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armaturefeatures: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder - bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, bearing with shaft assembly - type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end coversmounting: bench-mounted / frame-mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit- the plummer block housing material: cast iron (grade fg 200 or equivalent).type: sng or snl series (split-type housing).sealing: felt seals or v-ring seals (to demonstrate lubrication retention).lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearingtype: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series).bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: groundcarbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., (a).sliding mesh gear box for dismantling and assembling - (a) max transmitted power 1to1.5hp, torque capacity- 40 to 200nm, number .of speed 3 to 6, gear module 1.5 to 2, sliding mesh gearbox gearbox type- sliding mesh forward gears- 3reverse -yes gear material -alloy steel lubrication- splash / oil gear teeth- spur typical gear ratios- 3.2:1 / 2.0:1 /1.3:1 input speed- 0 1800 rpm housing material- cast iron(b) constant mesh gear box cut section - constant mesh gearbox (cut section) gearbox type :constant mesh forward gears :4 gear teeth -helical / spur dog clutch type- sliding lubrication -oil sae 80w90 housing- cut section material -hardened alloy steeleducational features-labeled parts., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

CTN :45384476

17 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For corrigendum : purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45354846

10 Jun, 2026 NA

Kalyani - West Bengal

Tender For corrigendum : supply of grease lubricated brg. hsg. no. saf-220 (de) with" v" felt seal, provision to be kept for rtd & mst , grease lubricated brg. hsg. no. saf-220 (nde) with" v" felt seal, provision to be kept for rtd & mst

corporations/Associations/Others

CTN :45468912

27 Jun, 2026 4.78 Lacs

Bankura - West Bengal

Tender For supply of - nrv reducer pump 65 mm , nrv of reducer pp 40mm gm , glv gm 10mm screwed end , circlip internal size b. 110 mm , circlip a-30 , circlip cf size od 79.5mm x id 70mm , circlip cf size od 50mm x id 43.5mm , circlip size od 115mm id 105mm , bearing lock washer mb 17 , washer lock mb 29 , washer bearing lock mb 26 , lock washer mb30 , washer lock mb 36 , felt seal , rubber pads for spider couplings l 150 , love joy coupling spider l110 , spider for coupling , pad coupling , pad coup for aux motor and gb for cm , clamp hose , hose clamp , hose suction for oil hp pump id 33.0 mm , girth gear hose , air breather fltr elemnt of cm lo tank , site glass for coal fdr main gb 20.5 mm , site glass for coc gear box , speri coal feeder lookng glass cs2036 , level guage , ol ind 40 char - procurement of different miscellaneous spares for the coal mill u 1to6 mtps

Felt Seal Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others