Latest female contact Tenders | Government female contact Tenders

corporations/Associations/Others

CTN :45285961

26 May, 2026 7.59 Lacs

Nellore - Andhra Pradesh

Tender For supply and delivery & fixing of electrical items and o&m of water supply as part of summer action plan for 18mld ss tank kohturu of nellore municipal corporation - 1 s.q mm copper wire coil( finolex) mat-02748 , 100 hp motor terminal plate , 100 mm cl earth pipes 2.5 mtrs long , 16 ams ss command , 20w led tube light set (crompton make) , 300 mm x 600 mm rubber mats for pannel boards , 33 kv electrical rubber protection gloves for hands , 4" ms bore clamp set , 5 ton chain block 10 mtrs (vital make) , bosch 50 ti x line tin coated set /drill bits , chemical earth pits , engaging of jcb on hire basis including cost and conveyance charges etc., complete , finolex 2.5 sqmm 4 core round copper wire 100 mtr , gi earth strip , insulation tape role , l/t 63 ams 3 pole isolater , l/t mn2 therminal overload relay (13 to 23 ams)40 contactor , l/t mnx 40 contactor , max hydralic 46 grade oil 26 ltrs , ms flat bar 10mm x 60mm , pannel board locks and keys , plantex secura 6 step alluminium ladder , providing welding work to kondlapudi raw water pumphouse maingate including cost and conveyance etc., complete , providing, laying, spreading and compacting graded hbg crushed stone aggregate to wet mix macadam specification including cost, seignorage of all materials and including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with vibratory roller to achieve the desired density etc., as directed by the engineer-in-charge and as per mort&h specification.406 (4th revision) for finished item of work , supply and erection of color gi sheets of sabrand jindal 0.5mm thick tct ppgl az-70 550mpa isi 5965 - 2012 for roofing including all the necessary bolting fixing arrangement, joint plate, edge cover, ridge etc complete and as directed by the site engineer , supply and transportation of following items 60w led street light (crompton make) , taparia ring flat spaner set , taparia s-15 hxl 1/2 dr socket set 24 pees , themisto th-m90 auto range clam meter , waco hand driven genarater type insulation 5000 volts 5-10000 ohms-meggar

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

Central Government / Public Sector

CTN :45302368

01 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot non ferrous scrap - copper lump scrap - 98210014(13) cond.& u/s copper lump scrap consisting of tags, earth shunts, ol board items, ol board long fingers, burnt winding wire, spcc panel components, solar flat plate panels, pipe bits, earth discharge rod cable, tubes, plates, lugs, isolator male&female contact, droppers etc. available in the bins with or without insulation/attachments. total gross weight: 1123.2 kgs.; said to contain total copper content: 1093.495 kgs approx.; total ms content: 3.175 kgs approx.; total aluminium content: 0.08 kgs approx.; total brass content: 0.365 kgs approx.; total gi content: 25.2 kgs approx.; total pvc/rubber/insulation/dust/others etc. content: 0.885 kgs approx. hsn code: 74040012; gst@18% on forward charge basis. note: 1) delivery on actual weighment basis only. 2) segregation not permitted. 3) purchasers/firms are requested to physically inspect the lot before offering their bids. 4) ) post auction no representation shall be entertained. 5) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 6) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. 7) railways does not guarantee for quality, quantity description etc.location: non-ferrous ward bin no: 9&19.

Central Government/Public Sector

CTN :45318809

04 Jun, 2026 NA

Bardhaman - West Bengal

Tender For supply of junction box type-a (control box) as per annex(mat code: 278425000) , junction box type-b (panel box) as per the specification(mat code: 278425010) , electrical junction box of 1200mm x 800mm x 300mm as per annexure(mat code: 278425930)

CTN :45162927

29 May, 2026 38.23 Lacs

Baramulla - Jammu And Kashmir

Tender For corrigendum : supply of 3.5 kva diesel generator dg set , xlpe insulated pvc sheathed heavy duty armoured multi core cable , on off load change over switches in sheet metal , electrical rubber insulating mat , spin on lube oil filter , fuel filter , fuel filter element , main element for air cleaner , v belt cogged avx 10 1265l , v belt cogged avx 10 1136 , hose for air cleaner , hose for lube oil drain , 7.5 kva diesel generator dg set , 20 kva diesel generator dg set , 40 kva diesel generator dg set

State Government

CTN :45300957

18 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For procurement of male-female contact of lt draw out module of unilec panel installed at various pump house at marwa

Central Government/Public Sector

CTN :45280249

01 Jun, 2026 NA

Krishna - Andhra Pradesh

Tender For supply of electrical insulation rubber mat

corporations/Associations/Others

CTN :45174640

29 May, 2026 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For supply of electrical insulation mat for esp switchgear of unit i and ii (2 x 600 mw)

CTN :45266226

27 May, 2026 NA

Sitapur - Uttar Pradesh

Tender For within the jurisdiction of the electricity distribution division, sitapur, the scope of work entails the mechanical overhauling of 11 kv vcbs (e.g., repairing/replacing components such as roller bearings, charging strips, charging pins, trip coils, male/female contacts, charging gears, bushings, double pins, charging springs, etc.) and the electrical overhauling of 11 kv vcbs (e.g., repairing/replacing components such as control cables/wiring, tripping coils, auxiliary switches, selector switches, and all associated wiring work related to metering and protection systems). this work is to be executed within the jurisdiction of the etd, sitapur.

CTN :45266262

27 May, 2026 NA

Sitapur - Uttar Pradesh

Tender For within the jurisdiction of the electricity distribution division, mahmudabad (sitapur), the scope of work involves the mechanical overhauling of 11 kv vcbs—specifically, the repair and replacement of necessary components such as roller bearings, charging strips, charging pins, trip coils, male/female contacts, charging gears, bushings, double pins, charging springs, etc.—as well as the electrical overhauling of 11 kv vcbs—specifically, the repair and replacement of necessary components such as control cables/wiring, tripping coils, auxiliary switches, selector switches, etc., along with all wiring-related works for metering and protection systems—all to be executed within the jurisdiction of the etd, sitapur.

Female Contact Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government / Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others