Latest female union Tenders | Government female union Tenders

corporations/Associations/Others

CTN :43265888

26 Dec, 2025 5.90 Lacs

Coimbatore - Tamil Nadu

Tender For tiruppur corporation_z4_gf_maintenance and special repaire work and providing and fixing of equipments tools and plants to the micro compost centre at shanthapettai i in ward no 52 - supply and fixing of sanitary napkin destroyer machine machine with storage capacity of 100 napkins per day with dimension of 220mm x 220mm x 360mm of wall mounting style no 1 pcs etc.,, supply and fixing of plastic crates of dimension 460mm * 520 mm with isi standard etc.,, supply and fixing of plastic barrels of measuring 800 litres with lid for storing of enzymes with isi standard etc.,, supply and fixing of plastic dustbin of measuring 250 litres for storing dry waste on segregation etc.,, supply and fixing of pest controller of 64w with 360 inser killer etc.,, providing safety gloves and apron for the workers with isi standards etc.,, supply and installation of viberator separator capacity of 1 ton/hr with power 2hp motorand measuring of size 3*6 feet and the installation to the required place as per instruction of departmental officers etc complete., supply of powing tools and segegrator for the ground work of mcc compost tank with isi standard and proper measuring length according to the requirement., supply of industrial making trolly as per standard sixw using of lead purpose etc.,, brick work in cm 1:5 mix using best second class table moulded chamber burnt bricks 9"x4 "x3" having 350 kg/cm compressive strength and 15% or less water absorbent in the period of 24hours immersement and confirming to isi specifications including finishing, curing etc., complete complying with standard specification., plain cement concrete 1:4:8 [one cement, four m-sand and eight course aggregates] using 40mm size hard broken/machine crushed granite stone jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification., plastering with cement mortar 1:4 mix (one cement four p-sand), 20mm thick in all floors using clean screened m-sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification., painting two coats with approved cement paint over cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface and curing etc., complete as per standard specification., finishing the top of flooring with a layer of cement concrete 1:3 [one cement and three stone jelly] ellis pattern 20mm thick using 10mm thick and below gauge hbg stone (no sand to be added) and the surfaces rubbed smooth with current etc., complete complying with standard specification., wring with 2 x1.5 sqmm (22/0.3) pvc insulated sc unsheathed cu conductor of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories in flush with wall with 3mm thick hylum sheet cover with tw switch box and 5a f.t switch with continous earth wire connection of 14 swg tc wire for making good of the concealed portion with suitable color of pvc concealed light point / fan point (for electronic regulator )., supply and fixing of 20w 4 feet led fitting as per standard specification., supply and fixing of 1200mm (48") sweep ac ceiling fan complete with stepped electronic 300w regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") ., supply and run of 2 of 1.5 sqmm (22/0.3) pvc insulated sc unsheathed cu.conductor of 1100v grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14swg tc wire and making good of the concealed portion with suitable colour., supply and fixing frp door shutter with frames made out of frp sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using ms angle / flats, cost of hold fasts and solid cor

State Government

CTN :43311748

06 Jan, 2026 25.22 Lacs

Ahmedabad - Gujarat

Tender For special repair to m.s. building, asarwa, ahmedabad. (providing and fixing toilet repair work, plumbing work, tiles work, cleaning chamber, furniture repairing work and other maintenance work)

Central Government/Public Sector

CTN :42815142

26 Dec, 2025 13.68 Lacs

Gangtok - Sikkim

Tender For corrigendum : special repair to building no t-343 and t-348 (chdh) at ms-02 of engr regt under ge gangtok

State Government

CTN :43302244

29 Dec, 2025 13.97 Lacs

Ganjam - Odisha

Tender For special repair to opd building such as fitting and fixing of ms grill with enamel painting in permises of sdh, hinjilicut building

Central Government/Public Sector

CTN :43290974

12 Jan, 2026 7.74 Lacs

Sonipat - Haryana

Tender For supply of 25 mm dia , 40 mm dia , ms pipe , non return valve , needle control valve , manifold valve , brass coupling , brass coupling 1 , nut bullnose , gas filter 1 , cylinder pipe 3 , adapter , m s pipe dbc , burner pipe 4 , adjustable regulator f type , pressure gauge 4 , m s elbow , seamless reducer up to 2 ibr , regulator 2301 20p , teflon tape , special clamp up to 2 , angle clamp up to 2 , m s gas bank double deck , installation charges , pneumatic testing , png gas leakage detector , 8 zone control panel processor , hooter for alarm , solenoid valve , 2 3 4 core cable , flexible conduit , power booster for 8 zone panel , installation charges gas leakage system , detector installation and calibration

CTN :42924414

29 Dec, 2025 11.51 Crore

Ganganagar - Rajasthan

Tender For corrigendum : supply of liners for bbd, 4760 type bhel supplied coal pulverizers, mills for kstps, kota and bbd, 4772 type bhel supplied coal pulverizers, mills for sstps, suratgarh and ctpp, chhabra against tn 47 2026 and 27 - 02 (two complete sets) and 02 (two partial sets) of liner for bhel supplied bbd-4760 ball tube mills for kstps, kota as per detail & quantities mentioned in the specification and also as per below:-, liners:-, high chrome cylindrical liner var-01 as per bhel drawing no.-1-62-109-50545 (rev-05), high chrome cylindrical liner var-02 as per bhel drawing no.-1-62-109-50545 (rev-05), high chrome cylindrical liner with oblique wave-1 as per bhel drawing no.-0-62-109-50716 (rev-05), high chrome cylindrical liner with oblique wave-2 as per bhel drawing no.-0-62-109-50717 (rev-05), high chrome cylindrical liner with oblique wave-3 as per bhel drawing no.-0-62-109-50718 (rev-05), high chrome cylindrical liner with oblique wave-4 as per bhel drawing no.-0-62-109-50719 (rev-05), short conical liner as per bhel drawing no. 1-62-109-50527 (rev 03), long conical liner as per bhel drawing no. 1-62-109-50528 (rev 03), inlet side liner as per bhel drawing no. 1-62-108-50562 (rev-02), inlet side liner with boss bhel drawing no. 1-62-108-50563 (rev-04), liner fixing fastners & hardwares:-, liner bolt m27x 100 as per drawing no. 2-62-104-50023 (rev-04), liner bolt m27x 165 as per drawing no. 2-62-104-50023 (rev-04), liner bolt m27x 180 as per drawing no. 2-62-104-50023 (rev-04), liner bolt m27x 265 as per drawing no. 2-62-104-50023 (rev-04), special steel washer for liner bolt m27 as per drawing no.-3-62-106-50244 (rev 02), self locking nut m27 as per drawing no.4-62-108-50393 (rev 03), backing material:-, epdm 65 rubber sheet-5 mm thick (sqm), epdm 65 rubber sheet-3 mm thick (sqm), caf joining sheet 03 mm equv. to style-20 (spitmaan) 1500x1600mmx3mm, caf joining sheet 1.5 mm equv. to style-20 (spitmaan) 1500x1600mmx1.5mm, total, 01 (one) complete sets of liner for bhel supplied bbd-4772 ball tube mills for stps, suratgarh as per detail & quantities mentioned in the specification and also as per below:-, liners:-, cylindrical liners var.01, cylindrical liners var.02, cylindrical liners with oblique wave 1, cylindrical liners with oblique wave 2, cylindrical liners with oblique wave 3, cylindrical liners with oblique wave 4, short conical liner, long conical liner, inlet side liners, inlet side liners with boss, liner bolts, special washers & hardwares:-, liner bolt m 27 x 2 x 40h x 80i x 130mm long, liner bolt m 27 x 2 x 3h x 80l x 130 mm long, liner bolt m 27 x 2 x 15h x 80l x 195 mm long, liner bolt m 27 x 2 x 3h x 80l x 210 mm long, liner bolt m 27 x 2 x 40h x 80l x 295 mm long, liner bolt m 27 x 2 x 15h x 90l x 210 mm long, special nylock nut with washer for m27 bolt, backing materials:-, 5 mm thick epdm-65 rubber sheet, 3 mm thick epdm-65 rubber sheet, 1.5 mm thick caf jointing sheet, champion gasket sheet-3 mm thick (style-20), champion gasket sheet-5 mm thick (style-20), total, 02 (two) complete sets of liner for bhel supplied bbd-4772 ball tube mills for ctpp, chhabra as per detail & quantities mentioned in the specification and also as per below:-, liners:-, cylindrical liners-i, cylindrical liners-ii, cylindrical liners with oblique wave-i, cylindrical liners with oblique wave-ii, cylindrical liners with oblique wave-iii, cylindrical liners with oblique wave-iv, short conical liner, long conical liner, liner bolts, special washers & hardwares:-, liner bolt m27 x 2 x 40h x 80i x 130 mm long, liner bolt m27 x 2 x 3h x 80i x 130 mm long, liner bolt m27 x 2 x 15h x 80i x 195 mm long, liner bolt m27 x 2 x 3h x 80 x 210 mm long, liner bolt m27 x 2 x 15h x 80 x 210 mm long, special nylock nut with ms cup washer & epdm rubber washer for m27 x 2, backing materials:-, epdm rubber sheet-3 mmthick, epdm rubber sheet-6 mm thick, champion gasket sheet-3 mm thick (style-20), champion gasket sheet-1.5

Central Government/Public Sector

CTN :43277553

13 Jan, 2026 NA

Moradabad - Uttar Pradesh

Tender For supply of aluminium extension ladder 13 mtrs fully extended (8 mtr + 8 mtr) 2. made of special rectangular tubing having dual internal vertical supports for extra of size 77 x32 x2 mm and c shape size 15x12x3 mm as per is-733-1983 temper t-6. (3) steps will be made of 26 mm square corrugated tubing fitted on (4) distance of 250 mm (10 inch) centre to centre. width of extension ladder min-310 mm (approx.) (5) ladder will have fixed rubber pads and hook on top of the ladder hook made of ms flat 32x5 mm hook bending on 5 mm dia. (6) pulley bracket complete with rope of p.p. 10 mm and locking arrangement.

CTN :43206774

05 Jan, 2026 9.94 Lacs

Malappuram - Kerala

Tender For rate contract for orthopaedic items - ortho items, abduction ladder, actiivty mat - 6ft x 3ft x 2", activity chair with lock large, activity door latch board, activity prone board with strap and hand placement, activity table, activity zip hook board, adjustable crawler, agility ladder, ankle exerciser, balance beam, balance board, ball pool with balls, basket ball set ped, blue screen visual, circular gym, corner sitting activity frame, corner station, disc swing, dumb bells (set), equipment trolley, exercise band set, eye hand coordination set, fine skill training set, flexy mirror set, grip exerciser, gymnic roll, ift, infinity mirror, kneel stand assister, laptop, low height activity cushion, low height therapy couch detachable, maze board, memory training puzzle set, milestone trainer, mirror wall mounting, multi activity board wall mounting, multy gym, muscle stimulator, music system, orbitrac, parallel bar -pediatric, pediatric climber multy task, pediatric standing frame ms, peg board graded round, peg board perdue, physio ball set of 2, physio table, puzzle set, pyramid cycle, quadriceps table, rain wheel rotation frame, resistance tube set, rock n wall board, sensory integration therapy ball, sensory walk path, shoulder pulley, shoulder wheel, soft block cube set, soft den with steps, soft foam roll activity set, soft mat eva foam, soft mat eva foam ot room, soft sea saw, soft wall panelling, special chair for disabled ms, special chair for disabled small, speech mirror, speech therapy chair student, speech therapy chair low height (therapist), stability trainer, standing frame with side support, stepper, supination & pronator, tens, texture board, tilt table manual type, treadmill heavy duty, tunnel crawling, twister, ultra sound massager, vertical climber, vertical positioning bar with frame, visual stimulation kit, walker adjustable, wall climber, water purifier, wedge set-(sml), weight cuff set, wheel chair, wrist circumductor, wrist rotary machine, ankle exersizer, auxilary crunches, commod chair, cp chair, elbow crutches, hand exercise, hinged knee brace, hs belt size, knee cap, ls belt size, mr kit, open patella knee cap, respiromentry for chest physio, standing frame, static cycle, stockinettle, therapy bed, therapy mat, tripode walking stick, tylors brace, walker, wheel chair with commode, wheelchair foldable

Central Government/Public Sector

CTN :43259648

09 Jan, 2026 44.77 Lacs

Sonitpur - Assam

Tender For special repair to building no. p-58 (single jcos living) of 122 engr regt, building no. t-45 at 4 ew bn and provn of gates and ms infrastructures for physical trg at 142 (i) fd wksp coy at naa under ge (n) tezpur

Central Government And Public Sector

CTN :43164743

02 Jan, 2026 NA

Angul - Odisha

Tender For supply of , corrugated flexible metal hose, corrugated flexible metal hose, 1 inch nipple ss 304 external thread, 3 by 4 inch ss nipple, 1 by 2 inch ss nipple, s s male and female union , ss union joints , ms union joint, ms union joints

Female Union Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors