Tender For supply of set of tools and equipment required for road art/brake down amla (details as per annexure). test certificate should be from nabl approved lab only. - unbranded cantilever tool box, 5 trays, tommy bar octagonal. size- 20mm x 600 mm long., material en8 as per attached drawing., hammer sledge double faced 3.2kgs is:841/1968 table-iii., ball pein hammer with handle conforming to is 841:1983 with latest amendments, specification: nominal mass-500 grams, handle- wood/polymer/fiberglass, material spec: steel grade t65/t70; handle length: maximum 350 mm but shall not be less than 300 mm., adjustable spanner 8", adjustable spanner 12", adjustable spanner 15", set of adjustable spanners & pipe wrenches of sizes 1) adjustable spanner size 10 inch/250mm qty/set-01 no 2) adjustable spanner size 15 inch/375mm- qty/set-01 no 3) pipe wrench size 24 inch/600mm- qty/set1no makes: fwrad0002-d & fwrrt0001-d of eastman or its equivalent of snapon, kingtony, taparia, or venus., wrench pipe chain capacity range 10 - 60,15-90,27 - 115,35-165, steel shovel with metal handle as per drawing number rwf/misc/m/1294, safety goggles designed to effortlessly fit over most prescription spectacles for convenience, temple adjustability enhances personalized fit and ergonomic, rigorously tested for optical quality, ignition resistance and high temperature durability, sterilized and fortified, ensuring technical durability and robustness, durable, clear, and scratch-resistant lens for precision optics and protection, lens scale no. clear:3-1.2, weight: approximately 54 grams, embodying lightweight precision in technical design, certified to en 166:2001 conforms to ansi 87.1-2010., accepted makes: karam es007 or black & dcor or 3m or midas or similar. accepted note: one sample to be got approved before bulk supply., magnifying glass with stand, lens size- 5", magnification- 4x area, 3.2 dioptre lens, reachstand internal concealed, spring mechanism with 900 mm reach from pivot and 600 mm in vertical plane reach from pivot 36" and 600 mm in vertical plane 24", illumination i) led ring with 40 leds in twin rings. ii) power consumption- 8 watts. iii) lumen output- 800lumens. iv) colour temperature-6000 degree kelvin v) nominal lux level at working plane 150 mm-2300 lux. along with accessories for each stand. i) increased magnification attachment dia -50 mm powerful additional lens that can swiung in the field view under the main lens. ii) spot lens dia-30 mm powerful additional lens that is permanently fused on the main lens to provide 16 x area magnification. brand- lensel optics model no - l104sd / greemito/toolstar, measuring tape with lock button size-5 meter (length) x 13 mm (width) case material-abs, blade material-carbon steel, case shape - round, tape colour-, black and white steel measuring tape 30 meter long graduated in mks & fps system to the fractions readable in mm & inch marking in full length of is certified company only, 15 cm spring steel scale, supply of manila rope of size 1 inch as per is:9936(1992). (note: required rope material is polymer braided twisted cord twine string in dia: 12mm) (required in 25mtr +25mtr sapratly), aluminum ladder 6 ft long, sand bucket, water bucket gi
Tender For instrument spare and annual maintenance contract - circular charts:-i) cc-200 (fc-261)range 0-100, ii) 9/d/179/fc-241, range 0-600, iii) 9/d/147/s-8963, range 0-150, iv) 9/d/112/s-3452, range 0-30, disposable pen (red), temperature gauge dial size 6" (h guru) heavy duty with test certificate (mercury filed) :-i) range 0-150 c streight steam 6", ii) range- 0-150 c capillary type (3 meter) bulb length 10" copper/pvc, iii)range 0-300 c streight steam 6", iv) range 0-500 c streight steam 6", vacuum gauge dial size 6" range- 0-30 inch of hg/760 mm bottom feed connection 3/8" bsp, h guru heavy duty with test certificate., pressure gauge dial size 6" bottom feed connection size 3/8" or 1/2" bsp, h guru heavy duty with test certificate :-i) range 0-15 psi 01 kg/cm , ii) range 0-30 psi 02 kg/cm , iii) range 0-60 psi 04 kg/cm , iv) range 0-150 psi 10 kg/cm , v) range 0-300 psi 21 kg/cm , vi) range 0-1030 psi 42 kg/cm /70 kg/cm , pressure gauge, dial size 10" bottom feed connection size 1/2" bsp heavy duty with test certificate:-i) range 0-60 kg/cm h. guru with test certificate, ii) range 0-2 kg/cm2 h. guru with test certificate, pressure gauge for turbines heavy duty with test certificate:-i) 4" dial size side back connection %" bsp range 0-2 kg/cm , ii) 4" dial size side back connection %" bsp range 0-4 kg/cm , iii) 4" dial size side back connection %" bsp range 0-7 kg/cm , iv) 4" dial size side back connection %" bsp range 0-10 kg/cm , teflon coated compensating cable 2 core j type, compensating cable fg/ss 2-core k type, 4 digit digital temperature indicator j & k typ , thermocouple sensor heavy duty:-i. 12" x 8 mm j/k type, ii. 8" x 8 mm j/ k type, iii. 6" x 6 mm j/k type, oil pocket ss 12", 6 digit digital event counter, proximity switch (magnetic sensor) pnp-nc sensing 8 mm,voltage 5-35 vdc, max load 300 ma, on/off pneumatic control valve flange type size- 1" to operate at air pressure 60-80 psi suitable for 20 kg/cm line pressure, on/off solenoid valve for pneumatic valve:-a) air filter " line size female thread, b) air filter with air regulator size 4", digital temperature controller (pid) j & k type, digital tachometer range 0-10000 rpm, 96 x 96 with magnetic sensor., steam flow indicator cum totalizer, drum level controller 4-20 ma input/output model no. 5296at (massibus make), dp transmitter 4-20 ma for boiler drum level, honybell make, positioner for drum level control valve, stroke counter for molasses tank, jumbo digital display with sensor, for juice and water tank, current and previous display size 4" x 4"., ma & mv source meter for temp. indicator calibration, pressure transmiter model tsc 01, range 0 to 40 bar, output 04-20 ma, accuracy 0.25% fs, pressure transmiter model ks-e-e-e b02u-m-v, range 0 to 2 bar, output 04-20 ma, supply 9-32 vdc, port g1/4e, syphon pipe s.s. 304 :-(i) u type, (ii) q type, pressure gauge, model en837-1, ss-316, dail size 6", bottom feed connection size 1/2" bsp, heavy duty with test certificate (tempsens make) :-i) range 0-6 kg/cm , ii) range 0-10 kg/cm , iii) range 0-21 kg/cm , iv) range 0-42 kg/cm , pid controller, size 96 96, model no. dc 1040, make honey bell, pressure recorder range, h-guru make, with test certificate (heany duty) with pipe stand mounted ", socket- ", size 10" :-(i) 0-1 kg./cm2, (ii) 0-2 kg./cm2, (iii) 0-10 kg./cm2, orifice with assembly (nipple), inlet pressure 21 kg/cm , outlet pressure 21 kg/cm , inlet temp. 350 c, outlet temp. 350 c, line size 4", drum level transmitter, range 400 to 400 in h2o, (make- honey bell), steam pressure transmitter, range 14.7 to 3000 psi, (make- honey bell), hade mounted thermocouple, length 450 mm, k-type duplex type, with test certificate (heany duty), signal isolator singal input 4-20ma, double output 4-20ma, repair & calibration work with amcsuper-heated wash water temp. controlling system- 01 no., d-super heated exhaust steam temp. controlling system- 01 no., temperature control system of transit heater for c/f machin
Tender For reer tender notice - purchase of non consumable item in thermal lab for mechanical department - open type air conditioning system kitcode - (d030)1.5 ton1. compressor type:open type capacity:0.5 tr to 1tr power 1 hp supply 230 v,single phase 50 hz2.condenser type: air cooled condenser material : copper tube with aluminium fins fan motor:230 v ac3.evaporator type :open fin type material : copper air circulation : blower assisted mounted openly for observation4. blower/fan type: centrifugal blower air flow : adjustable power:230 v ac5. refrigeration type : r226. measuring instruments pressure gauges: low&high pressure temperature:thermometers,digital sensors voltmeter : 0 to 300 v ammeter : 0 to 10 a temperature display : at inlet and outlet points energy meter: single phase, exhaust gas analysercode - (d037)to find the percentage of co,co2, o2, amount of hc and nox using exhaust gas analyzer. afr and lammda are measurable.
Tender For supply of mechanical lab items - furniture, crdi system demonstration board working with motorized. specification: fuel supply system diesel crdi type (actual working model with electronic ignition system), inlet manifold,throttle body with acceleration position sensor, fuel common rail, fuel injectors, fuel tank, fuel filter, fuel tank module (fuel pump), pressure relief valve, pressure gauge, ecu, electronic delco with distributor (powered by 12v motor or camshaft), ignition coil, spark plugs, power supply 12v / 10 amps, fuel level gauge & control panel,ignition key for on/off system, mpfi system demonstration board working with motorized. specification: fuel supply system petrol mpfi type (actual working model with electronic ignition system), inlet manifold,throttle body with acceleration position sensor, fuel common rail, fuel injectors, fuel tank, fuel filter, fuel tank module (fuel pump), pressure relief valve, pressure gauge, ecu, electronic delco with distributor (powered by 12v motor or camshaft), ignition coil, spark plugs, power supply 12v / 10 amps, fuel level gauge & control panel,ignition key for on/off system, exhaust gas analyser specification: to find the percentage of co, co2, o2 and amount of hc, nox in exhaust gas. *operating temperature: 0 to 50 degree celcius*measuring gas intake ; 1 litre per minute*reposnse time : 5 sec
Tender For supply and installation of aerosol based fire detection and suppression system cartridge100gm+100gm, total 2 pieces per coach sbc, technical requirement as per annexure g-1 of rdso spec.no. rdso/pe/spec/ac /0192-2018(rev-1) or latest and rdso letter no. el/7.1.108/mssbc dated 17.09.2021 andsetting of temperature range as 68-72 degree c for sensing cum actuating devices as per rdso letter no. el/7.1.108/sbc/main dated 06.08.25 or latest. revised location of aerosol based fire suppression system asper rdso letter no rdso letter no. el/7.1/.108/mssbc/main dated 18.06.2025. all necessary modification clamping arrangement and accessories required for installation of this item shall be with the scope of this supplier. acceptable make: rdso approved make. [ warranty period: 30 months after the date of delivery ]]
Tender For rate contract for medicine - stainless steel abdominal hysterectomy set, n.s.v set (s.s), g.v set, self abdominal detractor, m.t.p set., vaccine carrier (small size), x-ray digitalisation with high-end cr system (with installation & 1 yers. warrenty) console software with mulitmodality work station the cr system should have advances workstation provided with 17" high resolution monitor, keyboard & ouse, with the fol., digital ultrasound machine colour dopler (high resolution ) with 4 probe, semi auto analyzer, fully automated bio-chemistry analyzertechnical specificationsthroughput-150t/hr (constant with both mono and double reagent)system function-random access/stat/batchtest method-end point, fix time, kinetic, (single/double reagents chemistry, mono/ bio-chromatic measurements)calculation methods-1 point linear, 2 point linear, exponential, logit log3p, logit log 4 p, logit log 5p, spline, line graph, k factorblank-reagent blank, sample blank, pre sample blank, pre reagent blanksample tray-40 position, sample volume :2-30 ui, 0.1 ul increment, micro cup, & test tube can be used for samplereagent tray-80 position, reagent volume: 20-300 ul, 1 ul incrementmixing system-teflon coated mixersample probe-1 needle with liquid detector, shock sensoroptics-halogen-tungsten lamp, absorbance range: 0-4.0 abs resolution: 0.0001 abs.diffraction photometry with wave length: 340, 405, 450, 505, 546, 578, 630, 700nm & 4 more optionswash station-12 step washing, 4 needle wash station, 1 dry pad, external needle cleaningcalibration-linear and non-linearqc-multi-level qc setup with levy-jennings graph and westgrads multi rules with mean sd, and cvwater consumption-not more than 6l/hrtemperature-reagent: 2-14 c (24 hr refrigeration), reaction cuvette: 37c 0.1 humidity- 80%system interface-usbpower requirement-ac 220v 10%, 50/60 hzdimensions-750 mm*560mm*530mm, hotair oven, binocular microscope (olampus), centri fuge machin (good quality), micropipette (0-50 microliter), micropipette (0-500 microliter), micropipette (0-1000 microliter), microtips (0-50 microliter), microtips (0-1000 microliter), bed side screen with cloth 1"round pipe with wheel, sponge holding (all size), artery forceps 6" curved, artery forceps 6" straight., artery forceps 8" curved, artery forceps 8" straight., artery forceps 4" straight., alliys tissue forcep (all size curved straight), mosquito forcep (all size curved straight), scissor 6 " curved (all size), scissor 6 " straight (all size), scissor mosquito straight. (all size curved, straight), diatheromy (machine), laparoscopic instrument full set (best quality), needle holder 8 "curved, needle holder 8 " straight, needle holder 6 "curved, needle holder 6 " straight, needle holder 4 "curved, needle holder 4 " straight, doner couch (3 motor), blood weighting mechine, blood band refrigerator (300 bag) temp.display outside, elisa reader with washer mechine with printer & ups., doner couch (3 motor), blood weighting mechine, blood band refrigerator (300 bag) temp.display outside ( best quality), fully automated chemiluminescence analyzer(clia) 1. system should be fully automated walk -away with continuous loading facility.2. analyzer should have able to perform thyroid, bone, cardiac, fertility, diabetes and anemia profile test.3. working principle of system should be micron super paramagnetic particles platform with alp labeled reagents and amppd substrate.4. must have 3 phase magnetic separation with precisely controlled temperature.5. analyzer should have photon counting detection mode with photomultiplier photo counter with led reference module.6. the analyzer must have vortex non-touch mixing which can reduce carryover., 7. throughput of the system should be more than 180 tests in a hour.8. system should have 15 reagents onboard with onboard 2 -8 nonstop refrigeration facility 9. system should have at least 50 sample positions and continuous loading facility.10. system should have continuous reagent
Tender For supply and deliver of street lighting materials for west constituency maintaince and supply to electrical stock point at llr in guntur municipal corporation.-- 110w led street light , 130w led pcbs , 150w led drivers , 180w led pcbs , 200w led pcbs , 20w led drivers , 20w led pcbs , 35w led street light , 36w led drivers , 36w led pcbs , 45w led street light , 6 sqmm (1 coil = 90 rmt) , 70w led drivers , 70w led pcbs , 70w led street light , supply and delivery of following pcbs of led street lights fixtures makes of standard company. as per local quotations , supply and transportation of led driver as per is 15885 (part 2/sec 13) 2012 with input line voltage 120v-270v ac, 50hz with surge protection more than 2.5 kv, ip20, suitable for led indoor luminaire, with 2 years warranty. makes: as per list of recommended brands. as per local quotations , supply and transportation of led street light luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120-270v ac, p.f > 0.90, high power leds having system efficacy >= 120 lumens/watt and junction temperature < 70°c, with ingress protection ip66, luminaire performance complies to is 10322 (part 5/sec-3), driver surge protection 4kv, in-house additional surge protection 10 kv with optics distribution, thd<10% at 110 volts ac, driver efficiency >90%, cct: 3000k-5700k, minimum cri>70, etc., complete with earth connection and not less than two years warranty. makes: as per list of recommended brands / halonix halonix,bajaj,havells,crompton , supply and transportation of led street light luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass/temperature protective polycarbonate diffuser, supply input voltage 120-270v ac, p.f > 0.90, high power leds having system efficacy >=120 lumens/watt and junction temperature < 70°c, with ingress protection ip66, luminaire performance complies to is 10322 (part 5/sec 3), driver surge protection 4kv, in-house additional surge protection 10 kv with optics distribution, thd<10% at 110 volts ac, driver efficiency >90%, cct: 3000k-5700k, minimum cri>70, etc., complete with earth connection and not less than two years warranty. makes: halonix,bajaj,havells,crompton , supply of isi marked wpsc (weatherproof twin core) isi aluminum wire. makes: as per list of recommended brands ssr 2025-26 elec-1.6.2
Tender For supply and deliver of street lighting materials for east constituency maintaince and supply to electrical stock point at llr in guntur municipal corporation- 10.00 sqmm (1 coil = 90 rmt) , 110w led street light , 130w led pcbs , 150w led drivers , 180w led pcbs , 200w led pcbs , 20w led drivers , 20w led pcbs , 35w led street light , 36w led drivers , 36w led pcbs , 45w led street light , 6 sqmm (1 coil = 90 rmt) , 70w led drivers , 70w led pcbs , 70w led street light , supply and delivery of following pcbs of led street lights fixtures makes of standard company. as per local quotations , supply and transportation of led driver as per is 15885 (part 2/sec 13) 2012 with input line voltage 120v-270v ac, 50hz with surge protection more than 2.5 kv, ip20, suitable for led indoor luminaire, with 2 years warranty. makes: as per list of recommended brands. as per local quotations , supply and transportation of led street light luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120-270v ac, p.f > 0.90, high power leds having system efficacy >= 120 lumens/watt and junction temperature < 70°c, with ingress protection ip66, luminaire performance complies to is 10322 (part 5/sec-3), driver surge protection 4kv, in-house additional surge protection 10 kv with optics distribution, thd<10% at 110 volts ac, driver efficiency >90%, cct: 3000k-5700k, minimum cri>70, etc., complete with earth connection and not less than two years warranty. makes: as per list of recommended brands / halonix halonix,bajaj,havells,crompton , supply and transportation of led street light luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass/temperature protective polycarbonate diffuser, supply input voltage 120-270v ac, p.f > 0.90, high power leds having system efficacy >=120 lumens/watt and junction temperature < 70°c, with ingress protection ip66, luminaire performance complies to is 10322 (part 5/sec 3), driver surge protection 4kv, in-house additional surge protection 10 kv with optics distribution, thd<10% at 110 volts ac, driver efficiency >90%, cct: 3000k-5700k, minimum cri>70, etc., complete with earth connection and not less than two years warranty. makes: halonix,bajaj,havells,crompton , supply of isi marked wpsc (weatherproof twin core) isi aluminum wire. makes: as per list of recommended brands ssr 2025-26 elec-1.6.2