Latest ferrule fitting Tenders | Government ferrule fitting Tenders

Central Government/Public Sector

CTN :45557747

15 Jul, 2026 NA

Yamunanagar - Haryana

Tender For bogie general arrangement for side 1 power car ( with hand brake) with air spring 160kn in secondary suspension as per drawing no lp00001 alt-'a'. as per para 2.2 & 2.3 of mdts -20322 rev-'02', (double ferrule pipe fittings). 1) following items will be provided by railway:- 1. fully assembled wheel set. 2. phonic wheel 3. set of brake caliper these are free supply items to be collected by the vendor from judw. 2) fasteners to be used as per rdso l.no. mc/ctrb/genl dt 10.12.2024 (document attached at sn-5) 3) tpu ring compensating ring and primary spring to be used as per rdso l.no. sv .fiat springs dt 08.02.2026 ( document attached at sn-1) [ warranty period: 84 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45527657

22 Jun, 2026 NA

Jagatsinghapur - Odisha

Tender For tender for supply of male connector 1/2in od x 1/2in npt(m) , male connector 1/2in od x 1/4in npt(m) , male conn 1/4 odx1/4 npt p/n ss-400-1-4 , male conn 1/4 odx1/2 npt p/n ss-400-1-8 , male connector ss316 1/8 odx1/8 npt(m) , female con 1/4 odx1/2 npt p/n ss-400-7-8 , union tube 1/4odx1/4od p/n ss-400-6 , ss316 union 1/2in od ss-810-6 , union tee 1/2in od ss-810-3 ss316 , union tee 1/4 od p/n ss-400-3 , nut &ferrule 1/2in od p/n-ss-810-nfset , nut &ferrule 1/4in od p/n-ss-400-nfset , ferrule set ss 1/8 od ss-200-set , ss nut 1/8 p/n ss-202-1 , needle valve 1/2 od end conn ss-1rs8 , needle valve-ss-1rs4

Central Government/Public Sector

CTN :45556346

25 Jun, 2026 NA

Bengaluru - Karnataka

Tender For supply of insulated bootlace ferrule, 10mm pin length, 1.5sqmm wire size, black to rs components stock no.: 270-7508 or fully equivalent [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45556686

06 Jul, 2026 NA

Mysore - Karnataka

Tender For supply of aluminum ferrule of size:id 07 mm x od 9 mm and length 30 mm to specn. is:733-1983 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

corporations/Associations/Others

CTN :45377778

18 Jun, 2026 NA

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of cs impulse pipe , cs reducing insert , cs elbow , cs coupling size , cs halfcoupling , straight connector , cs globe valve , seamless tube , double ferrule double compression1 , double ferrule double compression2 , two way manifold , forged tee , front ferrule tube1 , front ferrule tube2 , back ferrule tube1 , back ferrule tube2 , union connector tube1 , union connector tube2 , union tee tube1 , union tee tube2 , reducing union tube , union elbow tube1 , union elbow tube2 , male elbow tube1 , male elbow tube2 , male elbow tube3 , male elbow tube 4 , female elbow tube1 , female elbow tube2 , female elbow tube3 , female elbow tube4 , male connector tube1 , male connector tube2 , male connector tube3 , male connector tube4 , female connector tube1 , female connector tube2 , female connector tube3 , female connector tube4 , seamless tube1 , seamless tube2

Central Government / Public Sector

CTN :45470819

26 Jun, 2026 NA

Mancheshwar - Odisha

Tender For corrigendum : supply of straight union 1'' od (double ferrule compression fittings) as per icf drg.no: icf/std-3-5-015 item no.03. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45502867

30 Jun, 2026 21.93 Lacs

Kozhikode - Kerala

Tender For material supply for the installation of 4 line hanging solar power fence at perambra estate - hanging solar power fence, p.p reel insulator-must be of virgin plstic material.polypropylene or equivalent with break down voltage of 15 kv(weight 25gm avh, length 4.6 cm avg), strain insulator- must of poly polypropylene plstic rated for 15 kv uv stabilized,(weight 40gm avg, length 7 cm avg), gi post 12 feet-2" gi pipe guage thickness, total 14.5 ft length modified to 12 feet length and cut and welding to 90 degree bend 2.5 feet length at top end and having diametrically opposite holes of size 6mm at end of bend pipe, intermediate post (t angle post)-6ft.,paited(25mmx25mmx3mm)having holes of size 6mm at required interval of fencing installation, supporting post- 10ft., gi-1",14 guage thickness,painted, stay (t angle)-2 ft., painted(25mmx25mmx3mm), 12 swg ht wire-12 guage,25mm dia high tensile with zinc coating for use as conducting wires for binding strain inulator, 14 swg binding wire- high quality zinc coating wire for binding reel insulators,tighing support post with corner post, 1.5 mm stainless steel wire rop 304 grade-1.5 mm stainless steel wire rop 304 grade, aluminium ferruel- aluminium ferrule inner dia 3mm, wire tightner- permanent wire tightner made of special aluminium alloy designed for kv,uv stabilized, earth rod- copper plated earth rod 14mm -3 ft. length, earthing compound- earthing compound 8kg, gate handle- gate handle and spring assembly. handle made of polyethyelene, leadout cable- lead out cable for fencie system double insulated gi cable inner core wire 2 sq.mm. hot dipped galvanlsed steel core, cable of with standing 15 kv should be provided to prevent bimetal salt formation at connections, single core 2.5 mm sq. cable- 2.5 mm2 single core copper cable for connecting the solar panel to the tuber battery through charge control unit with required terminal sockets, nut and bolt, washer, lightining diverter- 15 kv rod gap arrester,must be capable of diverting stray lightining and adjustable for spark raps adequate earthing to be provided, 100 watt solar panel- 100 watt/12 volt and above poly crystalline with 10 year warranty having iec/mnre certification, charge control unit- 20a, 12/24 v pwm charge controller unit of standard make suitable to control the charging of the tubular battery, energizer- energizer with 10 kv output safety standerds to be followed and bis 302-2-76 iec60335-2-76. switch high,medium and low power of settings, fence alarm system- fence alarm system conering area of 1.5 km, solar panel supporting stand with metal box painted ( for battery and energiser)- 18 guage thickness metal box (lockabe). gi sheet, painted should be capable of housing battery, charge controller and energizer and fixed with required clamps and nud and bolt on solar panel support stand made of gl pipe of 50mm daimeter and b class type with suitable arrangement for holding the panel, warning sign- polyethylene plastic with satuatory warning with signs, tubular battery 12v,100ah- 12v, 100 ah c10 rating with full 5 year replacement warranty(tower battery) for energising the energiser

CTN :45532344

01 Jul, 2026 4.54 Crore

Uttarakannada - Karnataka

Tender For procurement of dg and main engine spares - lubricant (lubriplate 105), guide studs for r&i of high pressure fuel pump- m12x1.75x110, puller fuel pump gear, clamp t belt hose, gasket water pump, hose flexible, gasket oil pan, collar crankshaft, switch pressure, shim plunger, connector male, elbow,male adapter, clamp, t-bolt, knob, screw,hexagon head cap, clamp t bolt(hose), plug, expansion, connection, water inlet, clamp bolt, seal rectangular ring, plug,o ring, spider jaw coupling, lever rocker, clamp,hose, washer,lock, gasket turbo charger, plug expansion, bushing camshaft, gasket,intake manifold, shaft,fuel pump drive, key, element, o ring turbo drain, turbocharger, hx80, pickup, magnetic, o-ring seal, shim, plug expansion, gasket lub oil pump, washer plain, diaphragm, breather vent assy, injector, solenoid, muffler, seal o ring, seal,o ring, seal o ring, fuel, supply check valve, retainer,injector cup, connecting rod bearings, gasket,connection, switch magnetic, nut lock, washer plain, cover,f p front, retainer,injector spring, gasket,wtr trf connection, switch pressure, barrel governor, seal dust, barrel and plunger, valve oil control, seal grommet, connection,air intake, seal o ring, plug threaded, nut lock, shim, gasket aft housing, seal,o rings, vibration damper, follower, camshaft, pump, fuel, seal, o ring, insert valve, seal o ring, screen,filter, valve,shutoff, seal,o ring, pump water, element fuel filter, tank,float, kit,coolant test, gasket turbo, gasket hand hole, screw,hex flange head cap, gasket connection, pinion air starter, bracket,belt tensioner, washer, lock washer, nut,tappet top stop lock, screw,hex flange head cap, gasket cylinder head, actuator,etr fuel control, hose plain, seal oring, valve,shutoff, seal ferrule, connector,tube, screw,hexagon head cap, flexible hose, assy,dial ind & sleeve, holder,dia indicator, pump,sea water, seal,o ring, seal o ring, hose flexible, wrench oil filter, element, lub oil filter, isolator vibration, actuator etr fuel control, seal o ring, turbo charger, injector, nut lock, screw,hexagon head cap, washer,plain, harness,etr cnt mdl wrg, connection oil transfer, rod engine, seal,ferrule, hose,flexible, clamp, t bolt, tube,water transfer, hose,flexible, hose,flexible, hose,flexible, hose flexible, hose, flexible, hose,flexible, hose,flexible, hose,flexible, hose,flexible, drain cock, hose,flexible, hose flexible, hose flexible, hose,flexible, o-ring seal, o-ring seal, plug thread, seal o ring, set lower eng. gasket, set piston ring, seal kit, kit stc tappet repair, plug expansion, pump water, element,air cleaner, element,air cleaner, cap air cleaner, inhibitor corrosion, nut,hexagon flange, blow by tool - 0.221" orifice, tappet replacement kit, puller inj universal, injector, qd contact cleaner, seal,rectangular strip, element,oil bypass filter, valve,check, connection,exhaust outlet, gasket exh out connection, pulley acc drive, element,lub oil filter, hose plain, hose plain, seal o ring, collet valve, nut hexagon flange, screw hex flange head cap, screw hex flange head cap, plug expansion, washer sealing, stud, clamp v-bend, screw,hex flange head cap, pin timing, clamp spring hose, brace exh out connection, hose plain, screw banjo connector, gasket,exhaust manifold, plug pipe, seal injector, seal,rectangular ring, coupling elbow hose, seal rectangular ring, hose flexible, clamp hose, seal rectangular ring, connection, exhaust outlet, pully crank shaft, seal rectangular ring, gasket hydraulic pp, screw hex flange head cap, gasket,oil cooler core, plunger,prs regulator, hose plain, pump,fuel injection, stud, housing timing pin, set,piston ring, screw hex flange head cap, screw hex flange head cap, valve exhaust, ring,oil piston, gasket,exh out connection, set,piston ring, clamp hose, clamp hose, plug threaded, plug threaded, screw flat head cap, spring valve, screw hex flange head cap, nut heavy hex, screw hex flange head cap, seal grommet, filter fuel, tappet valve,

CTN :45555632

06 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For crimping tool for ferrule, self-adjusting ratchet type, suitable for crimping insulated and uninsulated wire end ferrule in the range of o.25 to 4.0 mm sq. ensuring four-sided (square) crimp with automatic pressure control, compliance to iec60352-2, din-46228 as per attached annexure. make- wago model- variocrimp-4 part no. 206-1204, or knipex/germany model no.975304, or klauke/germany model-k3014k . note: the firm should submit proof of purchase from an authorised dealer along with the supply. [ warranty period: 30 months after the date of delivery ] ]

CTN :45557208

06 Jul, 2026 NA

Chittorgarh - Rajasthan

Tender For supply of ss 316 straight connector 0.125 inch od x 0.25 inch npt m , ss 316 straight connector 0.25 inch od x 0.25 inch npt f , ss 316 straight connector 0.25 inch od x 0.25 inch npt m , ss 316 straight connector 0.25 inch od x 0.25 inch bspt f , ss 316 straight connector 0.25 inch od x 0.5 inch bspt f , ss 316 straight connector 0.25 inch od x 0.25 inch bspt m , ss 316 straight connector 0.25 inch od x 0.5 inch bspt m , ss 316 straight connector 0.25 inch od x 0.5 inch npt f , ss 316 straight connector 0.25 inch od x 0.5 inch npt m , ss 316 0.25 inch od equal tee , ss 316 0.25 inch od reducing union tee 0.125 inchod , ss 316 0.375 inch od reducing union tee 0.25 inch od , ss 316 0.5 inch od reducing union tee 0.25 inch od , ss 316 0.5 inch od equal tee , ss 316 0.375 inch od equal tee , ss 316 0.25 inch od union , ss 316 0.125 inch od union , ss 316 0.25 inch od x 0.125 inch od union reducer , ss 316 0.375 inch od x 0.25 inch od union reducer , ss 316 0.375 inch od x 0.125 inch od union reducer , ss 316 0.5 inch od x 0.25 inch od union reducer , ss 316 0.25 inch od ball valve , ss 316 0.25 inch od needle valve , ss 316 0.5 inch od needle valve , ss 316 0.5 inch od ball valve , ss 316 0.375 inch od ball valve , ss 316 0.375 inch od needle valve , ss 316 adapter gland 0.25 inch vcr to 0.25 inch od , ss 316 glands with shoulder 0.25 inch vcr to 0.25 inch od , ss 316 0.25 inch vcr female nut , ss 316 0.25 inch vcr male nut , ss 316 0.25 inch straights 0.25 inch vcr male to 0.25 inch od , ss 316 0.25 inch straights 0.25 inch vcr male to 0.125 inch od , ss 316 0.25 inch straights 0.25 inch vcr male to 0.375 inch od , ss 316 male plug 0.25 inch vcr , ss 316 female cap 0.25 inch vcr , 0.25 inch ss 316 unplated vcr gasket electropolished , 0.25 inch ss 316 unplated vcr retainer gasket electropolished , ss 316 reducer long weld reducer without shoulder 0.375 inch x 0.25 inch o.d , ss 316 ferrule sets 0.25 inch od set of 10 , ss 316 ferrule sets 0.5 inch od set of 10 , ss 316 ferrule sets 0.125 inch od set of 10 , ss 316 ferrule sets 0.375inch od set of 10

Ferrule Fitting Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government / Public Sector

corporations/Associations/Others