Get complete information related to latest Fiber Optic Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Fiber Optic Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Fiber Optic Tenders.
Tender For provision of new led street lights with allied accessories on existing poles at various dark spots in saidulajab ward no 160 under south zone - led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy >135 lm/watt). supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, frequency 50/60 hz, operating temp range -5 0c to 50 0c, internal surge protection of 5 kv l,n,e as per iec 61000-4-5, driver efficiency >85%,thd 10% as per iec 61000-3-2, p. f. 0.95, ip-66,ik-10, cri >70, under voltage and over voltage protection, emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitary) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin), sdcm(standard deviation color matching)5, maximum power consumption should not more than the specified rating and fixture shallbe of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductorsingle core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 testreport and all testing required for led fixturesas per bis shall be submitted.. shape size and cct shall be as approved by engineer-in-charge asper requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). 45 watt , supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd, supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm
Tender For provision of led light fittings with accessories at various locations in ward no. 167 khanpur, under south zone. - supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm, led street light fixture, powder coated pressure die cast aluminum body (system lumen efficacy 135 lm/watt) supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range -5 deg centigrade to 50 deg centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-45, driver efficiency >85%,thd 10% as per iec 61000-3-2 , p. f. 0.95, ip66,ik-10, cri 70 , under voltage and over voltage protection,emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report , cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 135 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminum housing such that led junction temperature shall not rise above 90 c). 45 watt
Tender For material supply for the installation of 4 line hanging solar power fence at perambra estate - hanging solar power fence, p.p reel insulator-must be of virgin plstic material.polypropylene or equivalent with break down voltage of 15 kv(weight 25gm avh, length 4.6 cm avg), strain insulator- must of poly polypropylene plstic rated for 15 kv uv stabilized,(weight 40gm avg, length 7 cm avg), gi post 12 feet-2" gi pipe guage thickness, total 14.5 ft length modified to 12 feet length and cut and welding to 90 degree bend 2.5 feet length at top end and having diametrically opposite holes of size 6mm at end of bend pipe, intermediate post (t angle post)-6ft.,paited(25mmx25mmx3mm)having holes of size 6mm at required interval of fencing installation, supporting post- 10ft., gi-1",14 guage thickness,painted, stay (t angle)-2 ft., painted(25mmx25mmx3mm), 12 swg ht wire-12 guage,25mm dia high tensile with zinc coating for use as conducting wires for binding strain inulator, 14 swg binding wire- high quality zinc coating wire for binding reel insulators,tighing support post with corner post, 1.5 mm stainless steel wire rop 304 grade-1.5 mm stainless steel wire rop 304 grade, aluminium ferruel- aluminium ferrule inner dia 3mm, wire tightner- permanent wire tightner made of special aluminium alloy designed for kv,uv stabilized, earth rod- copper plated earth rod 14mm -3 ft. length, earthing compound- earthing compound 8kg, gate handle- gate handle and spring assembly. handle made of polyethyelene, leadout cable- lead out cable for fencie system double insulated gi cable inner core wire 2 sq.mm. hot dipped galvanlsed steel core, cable of with standing 15 kv should be provided to prevent bimetal salt formation at connections, single core 2.5 mm sq. cable- 2.5 mm2 single core copper cable for connecting the solar panel to the tuber battery through charge control unit with required terminal sockets, nut and bolt, washer, lightining diverter- 15 kv rod gap arrester,must be capable of diverting stray lightining and adjustable for spark raps adequate earthing to be provided, 100 watt solar panel- 100 watt/12 volt and above poly crystalline with 10 year warranty having iec/mnre certification, charge control unit- 20a, 12/24 v pwm charge controller unit of standard make suitable to control the charging of the tubular battery, energizer- energizer with 10 kv output safety standerds to be followed and bis 302-2-76 iec60335-2-76. switch high,medium and low power of settings, fence alarm system- fence alarm system conering area of 1.5 km, solar panel supporting stand with metal box painted ( for battery and energiser)- 18 guage thickness metal box (lockabe). gi sheet, painted should be capable of housing battery, charge controller and energizer and fixed with required clamps and nud and bolt on solar panel support stand made of gl pipe of 50mm daimeter and b class type with suitable arrangement for holding the panel, warning sign- polyethylene plastic with satuatory warning with signs, tubular battery 12v,100ah- 12v, 100 ah c10 rating with full 5 year replacement warranty(tower battery) for energising the energiser
Tender For supply, installation, testing, commissioning, and training of a package dental equipment system at iisc, bangalore.-chair dental chair unit , dentist stool , dental operating light (led) , cabinetry and side storage units , spittoon/cuspidor assembly , three-way syringe system , foot control pedal , in-built water purification , monitor display with mount , air rotor handpieces , micromotor handpiece , ultrasonic scaler attachments , curing light unit , saliva ejector holders , instrument trays and cassette holders , disposable cup dispenser , headrest covers and armrest covers , patient bib holder , suction tubing sets , waterline tubing accessories , led chair light handles , handpiece lubrication kit , foot pedal , waterline cleaning tablets/solutions , lubricating oil for handpieces , dental diode laser unit , touchscreen control console , teeth whitening machine/led whitening accelerator , power cord , laser delivery handpiece and fiberoptic system , adjustable articulating arm/stand , foot switch/foot pedal , mobile trolley/cart for laser unit , laser safety goggles for dentist, assistant, and patient , fiberoptic tips and tip holders , whitening gel syringes applicator trays , teeth whitening gel , built-in control panel , handpiece / scaler handle , power cord , foot control pedal , tip wrench , water tubing set , handpiece holder , scaling tips , dental intraoral x-ray unit , x-ray tube head , control panel / timer unit , articulated arm / support arm , mobile stand , exposure switch , high frequency generator , laptop , imaging software license , power cord , foot pedal , rvg sensor (size 1 & size 2) , sensor holder kit , usb interface module , dental intraoral x-ray unit , x-ray tube head , control panel / timer unit , articulated arm / support arm , mobile stand , exposure switch , high frequency generator , laptop , imaging software license , power cord , foot pedal , rvg sensor (size 1 & size 2) , sensor holder kit , usb interface module