Latest fiber plate Tenders | Government fiber plate Tenders

Central Government/Public Sector

CTN :45546012

18 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For corrigendum : supply of plate calibration as per blw drawing no. 11318776, qpl- 2 no. [ warranty period: 30 months after the date of delivery ] ]

CTN :45555783

03 Jul, 2026 NA

Jamalpur - Bihar

Tender For supply of worn wheel profile gauge, made of hardened stainless steel with laser etched permanent marking of "wheel profile size" and "name of wheel profile gauge" on each gauge. wheel profile is made from wire cut edm. all gauges have hardened 45 hrc & 4 mm thick ss plate with calibration certificate from nabl/iso accredited lab. for inspection of wheel profile of all type of wheel sets. in one set consistof following items:- 1. worn wheel profile (for bg wagon) gauge, size 29 mm, qty 01 nos, as per drg. no. 88021. 2. intermediate worn wheel profile gauge, size 20 mm, 21 mm, 22 mm, 23 mm, 24 mm, 25 mm, 26 mm, 27 mm & 28 mm, qty 09 nos(one each size), as per drg. no. wd-89060/s-02 3. 140t crane wheel profile gauge, size as per drawing, qty 01 no, drg. no. csl-3040 4. tower car mark- ii wheel profile gauge, size as per drawing, qty 01 no, drg. no. jmp/cr-46/2008 5. tower car mark- iii wheel profile gauge, size as per drawing, qty 01 no, drg. no. ga5443/jmp [ warranty period: 30 months after the date of delivery ] ]

CTN :45525479

06 Jul, 2026 11.85 Lacs

Kamrup - Assam

Tender For establishment of material testing laboratory under o/o the agm(c) design and projects aegcl kahilipara - civil works, compression testing machine (2000kn) with digital reading, automatic pace control with all attachment for testing concrete cube & bricks conforming to indian standards (is: 516, is: 14858) and can also be supplied as per british standards (bs: 1881), astm c-39 with calibration certificate. it should be typically calibrated to class 1 accuracy ( 1%); featuring a robust, fully welded loading unit and hardened, ground, and polished platens, often with a self-aligning upper platen; with display type as pc-controlled with software. it should have pace rate of full three-term pid feedback control with fully automated data acquisition, storage, and analysis. the operation should be fully automated, stress & strain controlled loading., aggregate impact test, crushing value apparatus with hammer weight of 13.75 kg 0.25 kg (or 14 kg 0.5 kg), height of free fall of 380 mm 5 mm, impact cup (mould) inner diameter of 102 mm 0.25 mm and impact cup depth of 50 mm 0.25 mm as per is 2386 (part iv), bs 812-112. automation grade often semi-automatic with a digital counter. display type digital for the blow counter; sometimes includes a digital gauge for other measurements. overall weight (approx.) should be of 45 kg to 60 kg (total machine mass). standards compliance conforms to international standards like is: 2386 (part iv), bs 812-112, etc. , sieves: (40, 20, 10, 4.75, 2.36, 1. 18) mm with lid and pan and (0.6, 0.3, 0. 15, 0.075) with lid and pan (all 200mm diameter size) metal : gi, weighing balance-30kg (accuracy-1gm)., weighing balance-5kg (accuracy-0.1gm)., hot air oven with double walled design, thick glass wool insulation to prevent heat loss, micro processor based auto tune pid digital temp controller cum indicators and 230 volt 50hz single phase ac supply, heavy duty stainless steel lock, indoor hinge and sample placement trays, temp range should be 50 degree c 250 degree c with temp accuracy 0.5 degree c. it should have digital led display of size 45 cm x 45 cm x 45 cm (inner)., cube mould (cast iron) of size 150mmx150mmx150mm, isi marked as per is:10086. weight of the mould will be about 13.5 kg, strictly as per bis specifications and within required tolerance., slump cone test apparatus-(isi marked)-with tamping rod (complete set ) as per is: 7320 and is: 1199 part 2, consisting of slump cone, base plate and graduated tamping rod - made of stainless steel., proctor test apparatus with all accessories as per is: 2720 part 8 and is: 10074(1982), complete with base plate and collar., measuring cylinder-borosilicate (1 complete set ) glass of sizes 100 ml, 250 ml, 500 ml and 1000 ml., field density test app-core cutter method ( complete set) complete with core cutter of 100 mm dia x 130 mm long with chromium plating, dolly for 100 mm dia core cutter, and rammer with steel rod as per is : 2720, rebound hammer digital (original/silver schmidt type n) with calibration certificate as per is 516 part 5, sec 4 with impact energy of 2.207 nm (1.63 ft-lbf), concrete strength range of 10 100 mpa (1450 14500 psi) and weight of 570 g (1.3 lb) with display as graphic lcd (e.g., 17x71 pixels) or analog/digital and battery life: >5000 impacts., ultrasonic pulse velocity test apparatus (proceq, acoustic control systems, vedantrik technologies) with calibration certificate and frequency range of 24 500 khz (nominal transducer); measurement resolution of 0.1 s (microseconds); pulse voltage ranging from 125 v to 500 v (adjustable); receiver gain of 1x, 10x, 100x, auto, up to 1000x (lab+ model); pulse shape as square wave; measurement modes as pulse velocity, surface velocity, e-modulus, compressive strength correlation, crack depth; memory which stores >500 measured values; display should be 79x21 mm passive matrix oled; connectivity through usb for pc connection; software: pundit link for analysis and export. standards compliance

State Government

CTN :45263804

22 Jun, 2026 4.63 Crore

Panchkula - Haryana

Tender For corrigendum : tender for the supply of various equipments - muffle furnace, "al2o3 sample plate, al2o3 furnace door block, protection glove, crucible clip, crucibles, karl fischer titrator, "titration vessel, detector electrode with lead, generator electrode (with frit) with lead, desiccant tube and cap, injection septa (pack of 10), gas tight syringe 1.0ml , luer needle 17-gauge, dust cover, results manager software, main power pack, fuse, karl fischer titration reagent(s), nist calibration standard, refrigerated centrifuge (bench top), bottles/falcon tubes/adapters for 0.2ml tubes, one set of other items (adapters) required for improving the applicability/system performance should to be quoted, nitrogen evaporator, evaporation tubes, gas fuse , water purification system including water softner, cartridges, filters etc. for , bomb calorimeter, "ignition wire, cotton thread, combustion crucible, bomb, nist certified benzoic for calibration, any other accessories required for analysis of food samples., gas chromatograph with ecd, tcd, fid with autosampler, "pesticide column (30 m x 0.250mm x 0.25m (5ms (95% dimethyl-, 5% diphenyl-polysiloxane / 1ms (100% dimethyl polysiloxane or equivalent) 100 mm column for fatty acid profiling with main concern of trans fatty acid application, column for cholesterol application, stationary phase: 95% dimethyl-, 5% diphenyl-polysiloxane (30 m x 0.250mm x 0.25m),, "vial sets (1, 2 ml, crimp type, amber and clear glass), vials (10, 20ml crimp type with cap & septa), 300/500 l recovery vials, septa ptfe/silicone (for 1, 2 ml vials), septa ptfe/silicone (for 10, 20 ml headspace vials), ergonomic crimping tools for different vial types, ergonomic decapping tools for different vial types, head space vials 10,20 ml capacity, suitable syringes for quoted autosampler, suitable headspace syringe /valve/loop, quechers kits for pesticides and herbicides in following matrices:, matrices with high fat, matrices with high water content, matrices with high pigmented, spe cartridges for water., ultra performance liquid chromatography (uplc) with photodiode array (pda), fluorescence (fld) and refractive index detector (rid), sample vials with 1.5 ml or greater, stainless steel ultra sonic bath with the capacity of 5 l or more, with time setting (min) 1-30min or continuous operation with led and push button (should be ip 33 protection class) for sonication of spare parts as well as solvents, fittings, frits, ferules and tubings, tubing cutter, solvent bottles (1000 ml capacity), solvent filters (glass & ss both, compatible manual syringes -10 l, 20 l, 50 l, standards for hplc calibration for pda, ri and fluorescence detector, consumables required for each detector must be provided., "hplc columns: one each of, c8 = 250 4.6 5m c18 = 250 4.6 5m, cyano = 250 4.6 5m. amino = 250 4.6 5m, phenyl = 250 4.6 5m. silica = 250 4.6 5m., all columns must be supplied with respective guard column and holder. ", uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., ft-ir with atr & liquid cell, " hydraulic press with kbr die and pellet holder, suitable mortar pestle (dia 5-6 cm), suitable portable de humidifier to maintain 30- 60% rh, temperature and relative humidity digital indicator with calibration certificate from iso 17025 accredited lab., reference nist standard polystyrene film (0.3 mm) over the range of 3800 cm-1 to 650 cm-1., abbes r

CTN :45252333

16 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of t/c speed sensor , flange with coupling , cross piece , male plug , oil pump casing , oil pump special nut , plug , flange , tightening ring , cover , alu shim , return line to cr case , pipe clamp , elastic mountings tsc t140/70 d , gasket , o-ring , o ring-an33 nse6.5 21a7 , fuel feed pump- cw engine , limit switch box , rubber compensating sleeve dn40 pn16 lf130 , rubber compensating sleeve dn80 pn16 lf130 , pipe , temperature sensor , turbocharger speed tranmitter , sleeve flexmaster gm10006-20 nbr , tab washer dn 12 , gasket , piston ring , o- ring , gasket , equipped cylinder head , o ring 15x204 viton (20209) , o ring 5x589 viton (20312) , peak pressure indicator , spherical bearing ge505w , inlet thermostatic valve , fw level switch , immersion heater , over speed solenoid valve , pressure gauge , spring washer packing , sealing ring , hex headed screw , hex headed screw , locking plate , cap nut , main bearing assly , bearing , eccentric shaft , gov driving gear pinion , ball bearing box , pair of bevel gears , bevel pinion , shim , safety valve in oil cct assly , water outlet part , duct , bs ring , joint , o ring no 87 21a7 , flexmast coupl(pipe-88.9mm-o.d) , joint , joint dn 150 , bolt m16x110l 8.8 with 2mm loc , injector pump pin , locking bolt m14-60 29 u 10.9 , water pump pinion , oil seal , internal circlip , shim , mech.seal for balmo f.f.pump , seal-balmo fuel feed pump , flexmast conn gm10006-038 (38 od) , flow switch for l.o. priming safe , joint press seal(p.18) 26x18 , safety valve , gasket , set of gasket for filter+hyd , set of full flow filtering elements , servo booster for pga 12 governor , temp sensor exhaust , fuel feed pump-ccw engine , set of oil seal 19x30x7 for aroto g15sp(ffp) , fuel feed pump-aroto-g15sp-fr ccw eng , drive rotor , driven rotor , packing at both end , mechanical seal , 25 pin socket insert plug jaeger , injector assembly , sleeve dn80 pn16 , lub oil thermostatic valve range 63/71 deg c , thermostat element , shim injection pump , o ring , expansion bellow , air staring vale , hose pipe mod 16 sae 100r5 l 220mm , flexible hose , rubber compensating sleeve dn65 pn16 lf 130 , ruber compensating sleeve dn150 pn16 lf130 , air distributor , loctite 648 , fuel clogging indicatior , sensor ref 19127sc , sensor ref 1950sc , switch for manual stop-xck-j265 , proximite detector mod 9984-2102 , breaker switch type zckj2 , starting air valve , 2 way pneumatic valve , o ring , disc spring dia 25xdia 12.5x1.5 , inner star for tacoma opvs , duplex fuel filter , filter element for 2-stage marin engine , injector calibration pump , temperature regulating pn40dn100 , pneumatic stop valve , pressure regulating valve , pressure switch , thermometer 0-100 , temp.sensor mbt4-s-90-m18x1.5-ef3 , thermostat element for naval opv , seal kit , circulation heater element for ktmi opv , thermostat for circulation heater for ktmi opv , fuel filter element for filter type-20251261751032 , over speed air lowpresure switch raing bar , l o p gear , non return valve , screw plug , packing perform , hydropneumatic pump with hoses , stud , circlip external-65mm , circlip external 90 mm , core plug hex.head 1/2 , rocker arm equipped , contact (aux) , o , ring , cup plug , exhaust gasket , anode , thermometric duct , inner star

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

CTN :45498902

13 Jun, 2026 NA

Bangalore - Karnataka

Tender For providing of custom bid for services - tender document for details , custom bid for services - for goa -total lumpsum cost (including gst)- supply & replacement of timing gears - 2 nos of timing gears 300# qty- 2ea- refer tender document for details , custom bid for services - for goa -total lumpsum cost (including gst)- supply & replacement of bearings - 4 nos of bearings 300# qty- 2ea- refer tender document for details , custom bid for services - for goa -total lumpsum cost (including gst)- supply & replacement of hf proximity sensor 300# qty- 2ea- refer tender document for details , custom bid for services - for goa -total lumpsum cost (including gst)- supply & replacement of silica gel cartridge 300# qty- 1ea- refer tender document for details , custom bid for services - for goa -total lumpsum cost (including gst)- supply of turbine assembly 2inch tfm qty- 1ea- refer tender document for details , custom bid for services - for goa -total lumpsum cost (including gst)- supply of oil pump 2inch tfm qty- 1ea- refer tender document for details , custom bid for services - for goa -total lumpsum cost (including gst)- supply of flow straightner 2inch tfm qty- 1ea- refer tender document for details , custom bid for services - for goa -total lumpsum cost (including gst)- supply of consumables during servicing of 2inch tfm qty- 1ea- refer tender document for details , custom bid for services - for goa -total lumpsum cost (including gst)- totaliser (rpdtfm) 150# & 600# qty- 1ea- refer tender document for details , custom bid for services - for goa - total lumpsum cost (including gst)- totalizer lower housing w gasket (rpdtfm) 150# & 600# qty- 1ea- refer tender document for details , custom bid for services - for goa - total lumpsum cost (including gst)- index cover (rpdtfm) 150# & 600# qty- 1ea- refer tender document for details , custom bid for services - for goa -total lumpsum cost (including gst)- supply of rpd oil 100 ml qty- 2ea- refer tender document for details , custom bid for services - for goa -total lumpsum cost (including gst)- supply of tfm oil 100 ml qty- 2ea- refer tender document for details , custom bid for services - for goa -total lumpsum cost (including gst)- supply of hf binder with 2(point)5 mtr cable qty- 4ea- refer tender document for details , custom bid for services - for goa -total lumpsum cost (including gst)- transportation charges from vendors works to gail location 2inch rpd tfm qty- 8ea- refer tender document for details , custom bid for services - for mah-total lumpsum cost (including gst)- repair of 2 inch rpdtfm meter 150# 300# 600# qty- 2ea- refer tender document for details , custom bid for services - for mah- total lumpsum cost (including gst)- calibration of 2 inch rpdtfm meter 150# 300# 600# qty- 2ea- refer tender document for details , custom bid for services - for mah- total lumpsum cost (including gst)- repair of 3 inch rpdtfm meter 150# 300# qty- 1ea- refer tender document for details , custom bid for services - for mah- total lumpsum cost (including gst)- calibration of 3 inch rpdtfm meter 150# 300# qty- 1ea- refer tender document for details , custom bid for services - for mah- total lumpsum cost (including gst)- supply & replacement of piston for 2 inch rpd meter - 2 nos 300# qty- 1ea- refer tender document for details , custom bid for services - for mah-total lumpsum cost (including gst)- supply & replacement of front & rear plate for 2 inch rpd meter 300# qty- 1ea- refer tender document for details , custom 3

CTN :45475068

15 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of lab equipments for gptc tvt chemistry department - purchase, digital electronic balance /analytical balance load capacity: minimum 500 g readability: 0.01 g linearity: 0.02g display: lcd/led tare function: required top pan type power supply: 220 240 v ac, 50 hz, digital tds meter measuring range: 0 9990 ppm resolution: 1 ppm display: lcd automatic temperature compensation (atc): required waterproof: minimum ip67 protectionpower source: battery operated (button cell/aaa battery), digital ph meter benchtop model ph type microprocessor/microcontrolle r ph range: 0 14 resolution: 0.01 ph accuracy: 0.05 ph or better combined ph electrode with temperature sensor two or three-point calibration facility temperature compensation type automatic display: lcd power supply: 220 240 v ac, 50 hz warranty minimum 1 year , laboratory heating mantle (knitted glass yarn) capacity: 500ml temperature range: ambient to 350 c energy regulator/control knob: required * power supply: 220-240 v ac, 50 hz, mortar with pestle material: porcelain size: 100 150 mm inner diameter exterior: glazed grinding surface: unglazed , hotplate top plate material: cast iron plate size: minimum 8 inch diameter power rating: 2000 w temperature range: ambient to 200 c minimum thermostatic temperature control: required power supply: 220 240 v ac, 50 hz, electric bunsen burner electrically operated energy regulator/ control knob operating temperature 800 c body: stainless steel power supply source: corded electric, supplied with a heavy-duty, heat-resistant, earth-grounded, 3-pin power cord (minimum length 1.2 meters). power consumption: between 350 and 500w power supply: 220-240 v ac, 50 hz, water distillation unit output capacity: 4 litres per hour (lph) ph value: 5.5 to 7.0 conductivity (raw water distillation):3.0 4.0 s/cm or less glassware material: borosilicate 3.3 glass (pyrex/duran equivalent) heating elements: silica enclosed quartz heaters or chromium-plated element variants power supply: 220 240 v ac, 50 hz / 60 hz, single phase automatic water level cut-off

Corporations And Associations And Others

CTN :45477136

17 Jun, 2026 NA

Batala - Punjab

Tender For contract for supply of turbine spares bellis - csm morinda spares for 2 mw bd-2 power turbine:- bellis make, locking plate with screw for nozzles, screw gland inner and outer, steam sealing ring with wave spring, nozzle plate bolts, aop complete, mop bushes, carbon ring with spring, emergency and governor valve drive spindle bushes, turbine rotor bearing a, turbine rotor bearing b, spared for ss-26 bellis make 2nd & 3rd mill turbine, turbine rotor bearing a, turbine rotor bearing b, carbon ring, sping and anchor, high speed coupling element size 14 mm, thrust collar for turbine governor, calibration of hydraulic turbine governor, throttle valve spindle

CTN :45416327

16 Jun, 2026 11.00 Lacs

Payyanur - Kerala

Tender For supply of multi process control trainer setup for instrumentation engineering lab under mhrd scheme - purchase of multiprocess control trainer setup for instrumentation engineering lab under mhrd scheme - multiprocess control trainer set up, multiprocess control trainer set up - specifications:- setup must contain flow, pressure, level, temperature loops also derived loops like cascade and feedforward loops. temperature loop must be independent. setups consist of a circulating closed loop water plant or circulating water system including control valve, tanks, independent pumps and necessary valves including bypass valves and rotameters. using this we can be able to do flow control loop with pid,level control loop with pid,and pressure control pid, as independent experiments.the setup must include the following:1.one linear characteristics diaphragm operated control valve with 15mm stroke 1/2-inch size, type: high-capacity globe seat leakage class (as per ansi/fci 70.2).2.measuring tank with volumetric measurement scale and 1000mm level, in of 25 ltr capacity. sump tank min of 40 ltr capacity. all tanks made of ss304, with sight glass, and finished with mat steel finish.3.2 no s smart dp transmitter for flow and level measurement with hart protocol, display and keys integrated for calibration,0-1000mmh2o measurement range,0.01% accuracy, international iso certified ce approved make,24v supply,4-20ma output, loop powered.4,1nos of magnetic flowmeter with display and keys integrated for calibration,0-2000lph measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, international iso certified ce approved make,24v supply,4-20ma output to measure flow as a independent loop.5,. smart pressure transmitter and temperature transmitters with hart protocol, display and keys integrated for calibration, pressure transmitter 0-10bar measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, temperature transmitter 0-250 rtd type international iso certified ce approved make,24v supply,4-20ma output, loop powered.6, pressure tank of 24 liters with necessary valves for pressure loop.7.1nos orifice plate (ss304) and assembly grade with flange 1/2-inch size for flow measurement.8.2 nos pumps 0.5hp, ss centrifugal pump, minimum 1-inch pipeline of ss or high-pressure withstanding plastic with plastic welding.9. rotameters 2nos 1 inch size flow: 200-2000 l/h,ss thread, clear acrylic type.10, plc control station with 4 analogue inputs and one analogue output with necessary digital inputs and outputs to operate all loops directly from panel side.plc must have ethernet connectivity with supported protocols profinet and modbus tcpip.11.required all pneumatic components to full fill the process loops such as fr,needle valves etc.12,i to p converter 4-20ma to 3-15psi with 1/4" process connection with proper copper copper tubing.13, loop including flow pid control, level pid control, pressure pid control, cascade control (level flow), ratio control (flow flow).14.all loops can be operated using a scada system and independent pushbutton control includes trend of all analogue signals and pid tuning. scada direct profinet connectivity to plc and computer with intel i5 processor, 8gb ddr3 ram,1tb sata hdd,licenced windows 11 professional.15, required a standalone software application that must be installed on pc in which it can used to control and monitor all the functions used in scada. the application must contain process parameter trend graph plot for to study about process loops.16.the whole system setup must be in ms powder coated standalone mobile table with lockable castor wheels. all the components used be industrial. copper tubing for air connection, pressure gauges 4inches 3nos, electrical wiring connection to be flexible for to connect field devices. panel with switches, indicator, test points with banana connectors as required, multistrand wire with proper insulated lugs, ferruling & neat wire dressing & clam

Fiber Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Corporations And Associations And Others