Get complete information related to latest Fibre Optic Cable Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Fibre Optic Cable Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Fibre Optic Cable Tenders.
Tender For rectification of cable and switchboard connections for mechanized coach cleaning machines and bio-toilet evacuation machines at pit no.-1, pit no.-2, pit no.-3 and ghy pit, along with wiring of glow signboards at ghy, kyq, dmv, scl and bpb stations for improvement of passenger amenities, including all associated electrical accessories and allied works in connection with shifting of high mast tower at ghy and other electrical works at ubz.
Tender For supply and installation of bbt from ha substation to materials movement area - design, manufacture and supply of sandwiched aluminium bus-bar trunking system 2000a capacity with canopy and all other accessories for successful installation work from ha substation to material movement area as per attached scope of work and technical specification., installation, testing and commissioning of sandwiched aluminium bus-bar trunking system 2000a capacity with canopy and all other accessories for successful installation work from ha substation to material movement area as per attached scope of work and technical specification., supply of 400a tap-off box with complete accessories as per attached scope of work and technical specification complete., installation of 400a tap-off box with complete accessories as per attached scope of work and technical specification complete., supply of 25x6mm copper strip, installation of 25x6mm copper strip, fabrication and supply of switchboard for 3phase 415v ac 50 hz system with incomer - 400a mccb 1 no, outgoings - 400a mccb 1 no, 200a mccb - 1no, 125a mccb - 1 no, 63amccb - 3nos and all accessories as per technical specification and scope of work, installation of switchboard for 3phase 415v ac 50 hz system with incomer - 400a mccb 1 no, outgoings - 400a mccb 1 no, 200a mccb - 1no, 125a mccb - 2 no, 63amccb - 2nos and all accessories as per technical specification and scope of work, supply of 3.5cx150sqmm a2xfy cable, installation of 3.5cx150sqmm a2xfy cable, supply of glanding and termination of 3.5cx150sqmm a2xfy cable, glanding and termination of 3.5cx150sqmm a2xfy cable, installation of 25x3mm copper strip
Tender For corrigendum : supply of providing and fixing 50 mm outer dia pipe and 25mm inner as per boq item no.3.6.1 , providing and fixing 8 swg gi earthing wire supply and laying as per boq item no.3.6.2 , providing and fixing 25 mm x 6 mm gi earthing strip supply and laying as per boq item no.3.6.3 , providing and fixing, supply and installation 150 mm wide cable tray as per boq item no.3.7.1 , providing and fixing, supply and installation 300 mm wide cable tray as per boq item no.3.7.2 , providing and fixing, wiring for lightor bell point with 2-1.5 sq.mm and earth wire of 1.5 sq.mm as per boq item no.3.8 , wiring for looped light with 2-1.5 sq.mm and earth wire of 1.5 sq.mm green both are of isi marked approved as per boq item no.3.9 , providing and fixing,wiring for fan or exahust fan or wall fan point with 2-1.5 sq.mm as per boq item no.3.10 , providing and fixing on board 6a, 5 pin socket controlled by 6a switch as per boq item no.3.11 , providing and fixing 6or16a, 5 pin socket controlled by 6a switch as per boq item no.3.12 , providing and fixing 6or16a, 5 pin socket controlled by 6a switch - single phase as per boq item no.3.13 , providing and fixing 6or16a, 5 pin socket controlled by 20a moduler sp mcb as per boq item no.3.14 , providing and fixing 2 x 1.5 sq.mm and 1 x 1.5 sqmm. copper wires with 25 mm dia frls conduit as per boq item no.3.15.1 , providing and fixing 2 x 2.5 sq.mm and 1 x 1.5 sqmm. copper wires with 25 mm dia frls conduit as per boq item no.3.15.2 , providing and fixing 2 x 4 sq.mm and 1 x 2.5 sqmm. copper wires with 25 mm dia frls conduit as per boq item no.3.15.3 , providing and fixing led rope lights as per boq item no.3.16 , providing and fixing 36w led 600mm x600mm fixture as per boq item no.3.17 , providing and fixing 18w led down lighter openor concealed as per boq item no.3.17.1 , providing and fixing 12w led down lighter openor concealed as per boq item no.3.17.2 , providing and fixing 10w led linear spot light as per boq item no.3.17.3 , providing and fixing 6worm strip light as per boq item no.3.17.4 , providing and fixing 2worm strip light as per boq item no.3.17.5 , supply installation testing and commissioning of 1200 mm 50w five star ratting as per boq item no.3.18.1 , supply installation testing and commissioning of 914 mm 60w five star ratting ceiling fan as per boq item no.3.18.2 , providing and fixing 32 mm dia. pvc conduit as per boq item no.3.19.1 , providing and fixing 25 mm dia. pvc conduit as per boq item no.3.19.2 , providing and fixing 100x50 mm pvc raceways white as per boq item no.3.19.3 , providing and fixing 50x50 mm pvc raceways white as per boq item no.3.19.4 , providing and fixing,supply, laying of cat 6 utp computer wire with conduit as per boq item no.3.20.1 , information outlets - providing and fixing,supply, installation testing and commissioning as per boq item no.3.20.2 , providing and fixing,sitc of cat6 24 port patch panel rack mount with lable as per boq item no.3.20.3 , providing and fixing,sitc of cat6 patch cord for patching at user desk 1-mtr. as per boq item no.3.20.4 , providing and fixing,sitc of cat6 patch cord for patching at user desk 2- mtr. as per boq item no.3.20.5 , providing and fixing,sitc of 6u wall mount rack for mounting devices with all required as per boq item no.3.20.6 , providing and fixing 2-module modular switchboard plates as per boq item no.3.20.7 , providing and fixing 4-module modular switchboard plates as per boq item no.3.20.8 , providing and fixing 6-module modular switchboard plates as per boq item no.3.20.9 , providing and fixing 8-module modular switchboard plates as per boq item no.3.20.10 , providing //bid details 3 / 84 and fixing 12-module modular switchboard plates as per boq item no.3.20.11 , providing and fixing,supply, installation testing and commissioning of rj 11 jack type as per boq item no.3.20.12 , providing and fixing,supply and installation of interactive panel as per boq item no.3.21 , providing and fixing,supply an
Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp
Tender For supply of misc it hardware items c c - a4 monochrome laser multifunction printer , a4 ink jet tank printers duplex network colour ink tank printer , multifunction a3 colour high ink yield rips , multifunction wi-fi color laser printer , wireless hdmi transmitter and receiver , lc to lc fibre patch cable 1.5mtr male to male 10 gigabites , mixer, 6 channel 6 mic line with high quality , ultra hd 4k collaboration and streaming webcam , ptz camera , mini xlr female to male sterio adpter cable , 8k hdmi 2.1 fibreopticcable , micro hdmi to hdmi , computer monitor 27 inches , 5 port 10 to 100 mbps switch , 8-port gigabit ethernet smart managed poe switch , 512gb sd card , cctv camera , all in one pc , fiber optic fusion splicer dash ftth fiber splicing machine with all tools , 1tb ssd , 2tb ssd , tv 43 inches , tv 55 inches , 1kva ups , 2kva ups , ups battery 7ah 12volt , bose linear array speaker system , 12volt dc power adapter powers supply smps 12volt 5amp
Tender For procurement of fsss spares of hea ignitors, flame scanner & air regulators for c&i-iii, unit-8&9, cstps, chandrapur. - scanner housing electronics card, flame scanner bn10 fibreopticcable, safe scan ii flat lens thk , little fuse for lamp & meter card, i&c fsss bhel spark rod tip-imported, power cyl assy bore, as per spec retractor assy complete, hea adv/ret assy ignitor solenoid valve, as per spc hea adv/ret assy limit switch, complete regulator high flow with press.
Tender For supply of sitc of wi fi access points including 1 year warranty controller licenses and installation charges , sitc of 48 port poe switches with all accessories including 1 year warranty controller licenses and installation charges , sitc of 24 port poe switches with all accessories including 1 year warranty controller licenses and installation charges , sitc of 48 port non poe switches for data center populated with transceivers including 1 year warranty , sdwan device for data centre including 1 year warranty and controller licenses , sdwan device for branch offices including 1 year warranty and controller licenses , implementation charges of sdwan per device , supplying and fixing of 19u rack with 1 mountable tray and 6 16 amps 6 socket including consumables and rack dressing , supplying and fixing of 12u rack with 1 mountable tray and 6 16 amps 6 socket including consumables and rack dressing , sitc cat6 48 port ethernet jack panel , sitc rack mountable tray , sitc of cat6 cables , sitc of cat6 armoured cable , supply and fixing of a set of male female rj45 connector for cat 6 cables , supplying fixing i o with i o plate 2 way and single i o plate , sitc back box pvc box size 4 x 4 for rj 11 plug socket , supplying and fixing of pvc casing and capping of sizes 0 75 to 2 , supplying fixing of pvc conduit of different sizes 20 25 32 40 50 mm , sitc cat6 patch cords 1 mtr , supplying and laying fibreopticcable 6 core single mode armoured , supplying fixing media converter single mode fiber to rj45 , charges for rack dressing testing tracking and labelling of lan cables per rack , amc charges of access points for line item 10 , amc charges of 48 port switches for line item 20 , amc charges of 24 port switches for line item 30 , amc charges for dc switches for line item 40 , amc charges of sdwan device data center for line item 50 , amc charges of sdwan device branch offices for line item 60 , charges for annual managed services
Tender For tender for supply of shifting of transmission lin - earth work in excavation of foundations of bridges culverts , buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around a for ordinary gravel soil involving pick work l_r ref no 6.7a of pb csr2020 , cement concrete 1_4_8 with stone aggregate 40mm gauge ii mixing by mechanical means using concrete mixer volumetric typet_r ref no. 10.11 b ii of pb csr 2020 , fixing , leveling , centering , alignment and setting of stubs complete in all respect satisfaction of engineer in charge (lumsum) n/s item , cold twisted deformed ribbed_tor steel bar bars fe 500 grade as per is _1786_2008 for rcc works , where not included in the complete rate of rcc including bending and placing in position in complete t_r ref no. 18.18 of pb csr2020 , shuttering for faces of concrete foundations and foundation beam and plinth beam (vertical or battering) ref no. 9.1 of pb csr2020 , centering and shuttering for columns (square or rectangular or polygonal in plain) ref no. 9.4 of pb csr2020 , reinforced cement concrete m_20 mechanically batch mixed using batch type concrete mixer as by is_1791 and vibrated by needle vibrate but excluding steel reinforcement centring and shuttering in foundation and plinth. ref no. 10.15 of pb csr2020 , extra for pumping charges of batch mix concrete _ready mix conrete work rmc ref pb csr 2020 item no. 10.46 , extra for using admixture in designed mix concrete ref pb csr 2020 item no. 10.50 , extra for carriage of rmc_batch mixed concrete with transit mixture beyond 1st km ref pb csr 2020 item no. 10.47 , design , testing , fabrication , supply , erection , foundation of 220 kv monpole pd 30 degree_60 degree bxa_32m , m60_3000lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc complete in all respect , cpri vetting charges of monopoles , supply of stubs of 220kv m/c tower type nmd krr design (weight 1901.28kg ht and 720kg ms including gi nuts and bolts weight 39.36 kg ) , supply of tower body of 220kv m/c tower type nmd+0 mtr. extn. krr design (weight 16094.64 kg ht and 8678.83 kg ms ncluding gi nuts and bolts weight 1111.15 kg) , supply of tower body including extension of 220kv m/c tower type nmd+3 mtr. extn. krr design (weight 17774.9 kg ht and 9697.23 kg ms ncluding gi nuts and bolts weight 1250.18 kg) , supply of stub template suitaible for 220kv m/c tower type nmd+3 mtr. extn. krr design (weight 1230.92 kg ms ncluding gi nuts and bolts weight 49.16 kg) , earthing arrangement of towers complete in all respect , danger plate , number plate , phase plate set of 3 , anti climbing device (acd) with concertrina wire , acsr conductor zebra 0.4 sq inch (copper eq.) , 220kv 160kn polymer string insulator , double tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , straight joint for acsr zebra 0.4 sq. inch (copper eq.) , vibration damper for acsr zebra 0.4 sq. inch (copper eq.) , bird guard , ladder/step bolts with washers. , form box , span marker_globules day marking sphere , 24 fibre(dwsm) opgw fibreopticcable , opgw tension fitting complete , opgw vibration damper , opgw joint box , opgw down lead clamp , erection of towers , stringing and sagging of conductors , earth wire/opgw wire and accessories , including tack welding of bolts complete in all respect , dismantlement of 02 towers including all necessary items and conductor including transportation of dismantled material from site to bbmb store panipat.
Tender For corrigendum : supply of el4614b-i-d-2-103-089c-p(switchboard k (w) -3) , el4614b-l-p-pa-200-14(200w amplifier for mb/sre) , el4614b-lic-p-hsp4-gr-14(4 w horn loud spekar, (wt) ) , el4614b-lic-p-misc-36r1-17(4 core x 0.75 sq mm lfh cable) , el4614b-lic-p-misc-38r1-17(2 core x 2.5 sq mm lfh cable)