Latest file compactor Tenders | Government file compactor Tenders

State Government

CTN :45684603

06 Jul, 2026 NA

Haringhata - West Bengal

Tender For rate quoted for mgnrega work various material under haringhata block - rate quoted for mgnrega work various material under haringhata block, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket

Central Government/Public Sector

CTN :45664534

30 Jun, 2026 NA

Salem - Tamil Nadu

Tender For supply of shifting of mobile storage system (file compactor) single bay 8 units [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45554211

06 Jul, 2026 15.00 Lacs

Jabalpur - Madhya Pradesh

Tender For tender for putai sigal court , putti double court, , pants single court, , pants double court, , isle pant single court, , ile pant double court, , repairing cement, sand, gravel work, , tile work, , marble. kota. stone work, , work of iron sad, , steel work, , aluminum work, , sanitary work, , woodwork - carpenter, , plumber work, , 1000 litre water tank cleaning work, , 2000 liter water tank cleaning work, , 2000 liter water tank cleaning work

State Government

CTN :45447017

11 Jun, 2026 NA

Nadia - West Bengal

Tender For supply of item rate e-quotations for various types of mgnrega materials as per annexure-i under tehatta-ii development block - item rate, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket bol

CTN :45432977

19 Jun, 2026 NA

Guwahati - Assam

Tender For supply of premium director desk with back unit , premium table with back unit , premium office chair , premium manager desk , high back chairs , revolving chairs , meeting table 6 seater , meeting table chair , single seater sofa , center table , 3 seater sofa , corner table , 41 seater confrence table , premium conference chairs , conference chairs , circular meeting table , circular table 800 mm , file compactor , six seater sofa set , working table , working chairs , wooden storages , study table , study chair , high end bed set , mid range bed set , dinning table set , 3 seater cubicle , 2 seater cubicle , 1 seater cubicle

CTN :45389640

18 Jun, 2026 NA

Howrah - West Bengal

Tender For zone no. 23 (general zone) under aen/rampurhat, p.e. 30.06.2027. jurisdiction from km. 135/0 to km. 172/2 - bansloi bridge to gumani (excluding bonidanga link cabin) including rajgram and pakur quarry. the work includes the general work, sanitary work, woodwork, colour wash/whitewash etc. under the jurisdiction of aen/rampurhat.

CTN :44971798

06 May, 2026 NA

Jaipur - Rajasthan

Tender For bid to ras supply of latest , table cloth 5x3 ft green , pin holder , acrylic readig, writing stand , daily programme stand , appointment board updation , offr do pad a4 size , offr do pad small size , accouunt book dak diary register 300p , accouunt book dak diary register 500p , deshboard polish , car perfume air wick , air freshner spray melange , air freshner cubes 50g odonil , air freshner reffile machine , automatic air freshner machine , mosquito repellant spray , mosquito repellant machine all out , reffile all out , liquid hand wash btl 200ml make dettol , glass cleaner 500ml makecolin , toilet cleaner 500ml makeharpic , phenol 1 ltr bottle , naphtalene balls , napkin tissue paper make glow , garbage bag 60ltr , dettol soap 175ml , floor cleaner 1 ltr lizol , coconut broom , soft broom , wiper with 5 feet handle , poucha cloth , car polish formula one liquied , mop pocha with handle , car napkin paper , toilet tissue paper roll type , toilet tissue papr fold type , towel for washing of vehicles , tyre polish , hand towel large , hand towel small , borossil glass med , borosil glass large , serving tray , qtr plate as per sample , name plate metal bilingual , compost , chloro ec , sis gold , indoor plant , planter steel , pad lock , measuring tape 05 mtr , measuring tape 50 mtr , hack saw frame , cutting plier , screw driver , spnr adjustable , pvc tool box large for tool set , masonry drill bit 6 mm , dustbin steel with lid , chair plastic without arms , hammer 200 gm , tester , plan tele set , car flags , star plate for car , taping screw nails , disposable paper cup for water , disposable paper cup for tea , ss screw masonry 6 mm , pvc plug 6 mm , casing capping 25 mm , sawblade , wall clock , brief case , easel tripad stand for board , appointment board glass , white board wrinting , pipe for vehicle washing , ro water purifier repair , original canon g-790 , original epson 008 ink bottle , original epson 003ink set , original hp cartridge no 388a , canon cartridge no 925 , tonner canon npg 51 black , tonner kyocera tk 7120 , tonner kyocera tk 7130 , keyboard , mouse , hp cartridge 730 magenta p2v57a , hp cartridge 730 yellow p2v58a , hp cartridge 730 photo black p2v61a , hp cartridge 730 matte black p2v96a , hp cartridge 730 grey p2v60a , hp cartridge 730 cyan p2v56a , mfd printer ricoh 3554 , cmos bty for pc , connector rj45 , file compactor 7 x module , file cabinet , cleaning machine automatic , water dispenser , trolly for load carry , ladder extendable extension size 20 ft , weighing machine 100kg person weighing , weighing machine 10 kg capacity , laser range finder bosch model glm-40 , vernier calipper digital 300mm , screw guage steel , drill machine , cordless drill machine 10 mm

CTN :45036193

05 May, 2026 NA

Delhi - Delhi

Tender For expression of interest document for supply and delivery of school requisites 2026 for secondary schools (design and technology) - supply and delivery of school requisites 2026 for secondary schools (design & technology) - angle grinder, band saw, bench drilling machine, bench grinder, circular saw, compressor, spraygun, drilling machine (portable), extension cable, hot wire cutter, jig saw (portable), metal lathe, planer / thicknesser, router (portable), sander -orbital, soldering iron, strip heater, welding machine, wood working lathe, abrafile frame, adjustable spanner, adjustable spanner, anvil, bench hook*, bench shear (guillotine), bradawl, carpenters mallet, centre punch, centre square, chisels- mortice, chisels- mortice, chisels -bevelled edge, chisels -bevelled edge, chisels -bevelled edge, chisels- firmer, chisels- firmer, chisels- firmer, cold chisels, combination drill, combination pliers, coping, saws, corner clamps, countersunk bit, dividers, engineers square, engineers vice, forstner bit, g cramps, g cramps, hacksaw, hammer: ballpein, hammer: ballpein, hammer: ballpein, hammer claw, hammer cross pein, hand drill, hand files including handles, hand files including handles, hand files including handles, hand saws, hand saws, inside calipers, jack plane, jenny calipers, junior hacksaw, machine vice, marking gauge, marking knife, measuring tape, metalwork bench, mitre box, mole grip, nail punch, needle files, oil can, oil stone, outside calipers, pincers, pipe wrench, rasps, ring spanner, riveting machine kit, router bits, sash cramps, saw set, screw driver, screw driver, scriber, sliding bevel, smoothing plane, spanner - open ended, spirit level, spoke shave, spoke shave, steel rule, taps and dies, tenon saws, tinmans snip, tinmans snip, try square, v-block and clamp, vernier calliper, wire brush, woodwork bench, woodworkers bench vice, blackboard compasses, blackboard protractor, blackboard rule, blackboard set squares, design tables, isometric-grid blackboard*, square-grid blackboard*, whiteboard compasses, abrafile blades, coping saw blades, emery cloth, emery cloth, emery cloth, goggles, hacksaw blades, junior hacksaw blades, masks - respiratory, masks - dust, paint brush*, paint brush*, paint brush*, welding apron, welding gloves, welding rods.

State Government

CTN :45037146

06 May, 2026 4.29 Lacs

Pali - Rajasthan

Tender For fabrication—including polishing—of office tables, chairs, side cabinets, side wall paneling, general woodwork, and other furniture items made from teak wood for wall paneling in the new building at the forest division office, pali, strictly in accordance with the prescribed schedule and tender specifications.

corporations/Associations/Others

CTN :45036205

14 May, 2026 NA

Delhi - Delhi

Tender For e-tender for annual rate contracts for civil, woodwork, waterproofing, painting, and structural repairs works for lic premises in delhi and ncr for the year 2026-27.

File Compactor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

State Government

corporations/Associations/Others