Get complete information related to latest File Cover Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic File Cover Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding File Cover Scrap Tenders.
Tender For auction sale of depot miscellaneous scrap - rate contract for sale of condemned china msf axle packing wooden box, klw wheel packing wooden box, other packing woods etc,. including attached ms items if any, with or without dismantled condition and in mixed, damaged, broken condition as available in the lot area. purchaser is permitted for dismantling of packing wood box or other woods. this will be a fixed price sale and the other rate contract conditions are attached as special conditions along with catalogue. quantity: 25mt approximately available at this location, balance quantity material will be unloaded within mentioned contract period at mentioned locations. validity of rate contract is 90 days from the date of auction. note: at the time of delivery, the purchaser should take all broken, old type wood, dismantled parts of the boxes including attached ms items like corner plate, nails, bolts, strips etc. delivery will be given as is where is basis. purchaser can inspect the items thoroughly before e-auction. delivery unit : in mt.
Tender For auction sale of depot ferrous scrap - pl no.98050126- ferrous scrap consisting of condemned and unserviceable welding electrodes in full / cut , end bits of electrodes, with / without flux, of sorts and sizes with packing material. as is wheres is condition. note. flux removal is not permitted. removal of packing material is not permitted. approximate total weight of the packing material[wastage] is 120 kgs
Tender For auction sale of depot ferrous scrap - m s heavy melting actual lot no. 03122606 0628. pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) ms scrap of cond. & unserviceable heavy melting angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins dv covers bushes brake shoes shackles shackle stones strips j bolts hand brake wheels latches toothed segments foot steps hanger brackets bevel gear wheels horizontal levers door hinges flanges wedges cut bits, ms sheets side barer housings pipe pcs. straps, packing plates, jacks, mould shoes, liners sheets pipe pcs. pins throwers locks races collars axle box covers, liners, and other miscellaneous items of wagons s&t and ttm sorts & sizes full or broken with or without attachments. location: road no.3 (image attached) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )
Tender For auction sale of depot ferrous scrap - 12232ms26c,98050175, quantity- 60.085 mts. scrap condemned unserviceable ms-gi-ci rusted,corroded,dusted mixed scrap of c and w,loco,p. way,signal interlocking material consisting of all type of sheets,boxes,ms high gauge,pipes,footsteps,rings,strips,filters,trusses,patch cut parts,gutters,drum clocks,distribution boards,u rack,boring rod,ms panel body,ms battery charger covers,hand cuffs,driver seat,hand cart,push trolley,packing strips,ms body of block instrument,ms boiler coil cut pieces,42 u rack ms body,ms collapsible gate,ms termination box,ms bathroom ventilator,ms body of data logger,ms heater coil,screen guard,nuts,bolts,lavatory doors,ms carriage doors,pins,rivets,links,rods,angle cut pieces,structural frames,brackets,drums,cocks,basins,wire meshes,wire ropes,water tank cut up parts,casings,corrugated sheets,filter top and bottom caps,clamps,washer plates,stands,frames,sheet cuts,plate cuts,joists,channels,bases,plates,flats cut pieces,vestibule frames,window,door,shutters,head stocks cut up parts,broken t and p items,racks,compensating rings,bindings,washers,dust bins,chains,berth strips,gate frames,iron furniture,motor bodies,screw rods,levers,flats,rod cut pieces,trolley wheels,gi ducts,glow sign boards,ms electrical scrap,building rods,packing strips,ms body of rru,air cooler empty bodies,cbf filter,corrugated sheets,drums,blower motor frames,ucb packing frames,under frame cut up parts,berth frames,supports,cylinder blower covers,valves,end shield covers,traction motor yokes,shafts,piston rings,gears,brake shoe heads,brake gear items,straps,cotters,springs,equalizing stays,fan hub,end shield,pinions,ms covers,signal arms,lc gate pipes,ladders,angles,signal booms,rounds,signal buckets,pulleys,fabricated posts,signal lamp structures,liners,screws,spikes,air brake cylinders,brake hangers,bss hangers,battery boxes,battery containers,junction and location boxes,sleepers cut pieces,axle counter empty box,dc-dp ips empty rack ,sge block instrument empty box ,reset counter box,gps clock ,42 v rack,transformer bay,ms chain pulley blocks,beam scale parts,idly cooker with steam generator body,wheel barrow,fry pan single burner,ms floor stand,ms sliders,ms body wet grinder,fry pan,jara,ms ips rack rifle safety chain,ms air pump,foot spray,antenna,spiral binding machine,ms man drill,trbc covers,hand cart push trolley,expresser fan guard,ms first aid box,hacksaw frame,tool box,tie bars,ci brake blocks,composite brake blocks,ci pulleys,buckets,ms gear wheels,gym equipment,roti maker,bicycle parts,axle box,bfr cut up parts,grills,mesh,gate wheels,girders cut pieces,collars,trolleys,foot plates,signal point rods and any other ms-gi-ci material present in the lot with or without attachments of nf,ss,rubber,nylon and plastic. ms pan mortars,wire claws,wire baskets,crow bars,jim crow,dip lorry,weld filling body,sleeper hooks,rail dollies,rail cutting frames,augers,pick axe,tongue for rails,spades,beaters,ballast rake,powrahs,rail cum road mono trolley,case tin,h.s.lamps,rail dolly clips,shovels,trolley wheels and similar gang man items of sorts and sizes,with or without attachments.fiber,glass,windows,frp glass windows,window frames of sorts and sizes,broken or unbroken,with or without attachments of nf window shutters. [aluminium - 2 percent] note- 1. nf material,axles,wheel discs,and rails or material not mentioned in the description,if found during the delivery are to be returned to railways. 2. track and track fittings running through this area are excluded. 3. nf and stainless-steel attachments are approximately 0.1 percent of the lot quantity. 4. gas cutting permitted to facilitate loading. location- bin no- 232, right side of road no- 2. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per motor vehicle act 1988.
Tender For annual fixing of rates for supply of workshop material as per rec/is/pdd approved standard and rec drawings, in the jurisdiction of electric division(jpdcl) poonch for the financial year 2026-27 (all the items should be as per latest specifications and drawing adopted/approved by department) - items, se. aluminum winding wire (round) in sizes 12 to 21 swg, dpc aluminum winding wire (round) in sizes from 12 to 21 swg., dpc aluminum strip of sizes for lv winding of distribution transformers 25kva to 250kva, se. aluminum winding wire (round) in sizes 12 to 21 swg.( in exchange of one kg of scrap including insulation coverage ie salvaged conductor), dpc aluminum winding wire (round) in sizes from 12 to 20 swg.(in exchange of one kg of scrap including insulation coverage ie salvaged conductor), dpc aluminum strip of sizes for lv winding of dist. transformers 25kva to 250kva.( in exchange of one kg of scrap including insulation coverage i.e. salvaged conductor), se copper winding wire (round) in sizes 11 to 22 swg., dpc copper winding wire (round) in sizes 11 to 22 swg., dpc copper strip of sizes for lv winding of distribution transformers 25kva to 250kva., se copper winding wire (round) in sizes 11 to 22 swg.( in exchange of one kg of scrap including insulation coverage ie salvaged conductor), dpc copper winding wire (round) in sizes 11 to 22 swg.( in exchange of one kg of scrap including insulation coverage ie salvaged conductor ), dpc copper strip of sizes for lv winding of distribution transformers 25kva to 250kva. ( in exchange of one kg of scrap including insulation coverage ie salvaged conductor ), lv. brass bush rods 12 mm, lv. brass bush rods 20.mm, lv. brass bush rods 25.mm, lv. brass bush rods 30mm, hv. brass bush rods 12 mm, buy back of scrap/old brass bush rods, cork washer for lt bushings big / small, cork washer for ht bushings big / small, lt rubber washers (small m12 & m20) (large m12 & m20), ht rubber washers, ms washers for lt, gutka for ht bush, hv bushing (11kv) 12mm, lv bushing 12mm, lv bushing 20mm, lv bushing 25mm, cotton tape 1 (size), length 25 mtr, nawar tape 1 (size), old cotton sari / cloth, rubberized cork sheet 4mm thick, rubberized cork sheet 5mm thick, cork strip 5mm thick, lethoride paper, electrical grade kraft paper, packing sheet 1 mm, packing sheet 1.5 mm, varnish dr. beck, m seal, fevicol, glass wool sleeves of sizes, backlite tubes, inch inch(i mtr length), packing gutties, manual operated oil pump, transformer oilas per the specifiction of is-335 amended from time to time, ms nuts andd bolts full thread size 1/2 in to 3 in, ms plug and caps 1/2", 3/4", 1", 1.1/4", 1.1/2"confirming to relevant is code amended upto date, film paper 7milsconfirming to relevant is code amended upto date
Tender For auction sale of depot ferrous scrap - mms /jun-26/02: scrap mixed ferrous melting amalgamating the various type consisting of scrap classes pl/8,mf/10, hf/1, b/10,j/4, p/4, mp/1, mp/4,mp/5 plate cutting etc. not in re rollable condition and other than stainless steel and non-ferrous item. materials are mostly heavy meting like anchor link silent block, brake head, collar, end cap, nut, bolt, pin safety strap & studs, block hanger, hanger block, tringular locking plates, bracket, wearing plates, brake cylinder cover, packing ring, draw hook beam, foot step, suspension strap, tension device spring, bearing components, insulator cap, cutoff angle cock, isolating cock etc as available in the lot. bidders are requested to visit the material before bidding.
Tender For auction sale of others - miscellaneous coach released material mixed condition i.e industrial waste consisting of- (1) decolite released from floors of coaches. (2) pieces of porcelain wash basin, commode etc., broken pieces of plain and colour glass released from coaches with or without non ferrous/ferrous attachment, if any. (3) old l p sheet (decolum) of irregular sizes including pop rivet, seat/berth no. plates, pieces of limpet sheet, off-cuts of broken unserviceable lp sheet, unusable timber/plywood/wood scrap, broken pieces of compreg, plywood, broken slates, pieces of berth/shutter panel etc. released from coaches. (4) unserviceable/perished rubber items like-window sealing rubber, gas rubber hose pipes, shutter felts, rubber released from coaches, unserviceable pieces of foam, rexene and recron. (5) floor sweeping consisting of sand, mud, saw dust, scrap paper, coach rust ashes, rusty nails, nut-bolts, washers, small pieces of rusted mouldings, and pieces of ss moulding aluminium rivets etc, which cannot be segregated with reasonable effort, will be allowed in small quantity. (6) released unserviceable plastic spool containing end pieces of filler wire, wire rope, pieces of thermocol, unserviceable electrical switches with pieces of electrical cable, minor attachments, if any which cannot be segregated with reasonable efforts, plastic bend pipes and released air filter of rmpu. (7) released packing material (rubber and wooden) polythene bags, unusable gunny bags, card board, paper, puttah, gatta, old/teared hand gloves, aprons, etc. (8) broken welding hand screen, helmet, face shield, broken pieces of battery container, bakelite, plastic/pvc sheet. broken pieces of battery flutes, flexible pipes. lot no. crws/bpl/mech/coach furn/26-27/03 date: 24-04-2026 note: (1) ferrous and non ferrous metallic items except minor attachments with the material of lot will not be delivered. (2) all materials should be lifted with road level in sweeping condition. (3) delivery will be made on actual measurement. (4) ferrous & non-ferrous items will be returned by purchaser to stockholder during delivery, if any found in the lot. (5) hazard waste item i.e. paint peeling, paint-dust will not be delivered. (6) if any another material found except description of material will be not delivered and returned to stock holder. (7) sorting/segregation of material is not allowed.
Tender For auction sale of others - miscellaneous coach released material mixed condition i.e industrial waste consisting of- (1) decolite released from floors of coaches. (2) pieces of porcelain wash basin, commode etc., broken pieces of plain and colour glass released from coaches with or without non ferrous/ferrous attachment, if any. (3) old l p sheet (decolum) of irregular sizes including pop rivet, seat/berth no. plates, pieces of limpet sheet, off-cuts of broken unserviceable lp sheet, unusable timber/plywood/wood scrap, broken pieces of compreg, plywood, broken slates, pieces of berth/shutter panel etc. released from coaches. (4) unserviceable/perished rubber items like-window sealing rubber, gas rubber hose pipes, shutter felts, rubber released from coaches, unserviceable pieces of foam, rexene and recron. (5) floor sweeping consisting of sand, mud, saw dust, scrap paper, coach rust ashes, rusty nails, nut-bolts, washers, small pieces of rusted mouldings, and pieces of ss moulding aluminium rivets etc, which cannot be segregated with reasonable effort, will be allowed in small quantity. (6) released unserviceable plastic spool containing end pieces of filler wire, wire rope, pieces of thermocol, unserviceable electrical switches with pieces of electrical cable, minor attachments, if any which cannot be segregated with reasonable efforts, plastic bend pipes and released air filter of rmpu. (7) released packing material (rubber and wooden) polythene bags, unusable gunny bags, card board, paper, puttah, gatta, old/teared hand gloves, aprons, etc. (8) broken welding hand screen, helmet, face shield, broken pieces of battery container, bakelite, plastic/pvc sheet. broken pieces of battery flutes, flexible pipes. lot no. crws/bpl/mech/coach furn/26-27/04 date: 24-04-2026 note: (1) ferrous and non ferrous metallic items except minor attachments with the material of lot will not be delivered. (2) all materials should be lifted with road level in sweeping condition. (3) delivery will be made on actual measurement. (4) ferrous & non-ferrous items will be returned by purchaser to stockholder during delivery, if any found in the lot. (5) hazard waste item i.e. paint peeling, paint-dust will not be delivered. (6) if any another material found except description of material will be not delivered and returned to stock holder. (7) sorting/segregation of material is not allowed.