Latest filler Tenders | Government filler Tenders

Central Government / Public Sector

CTN :45454728

10 Jul, 2026 NA

Secunderabad - Telangana

Tender For corrigendum : supply of isi marked, cord flexible sheathed circular 3 core with tinned or plain copper conductorspvc insulated, cores twisted together with a suitable right hand lay. the interstices may be filled with sheathing material, fillers or strengthening cards of textile or any suitable material. the size of the card shall be 0.5 sq.mm. [16/0.20 mm] conforming to is.694/2010 with latest amendments. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45736502

24 Jul, 2026 NA

Bikaner - Rajasthan

Tender For supply of solid mig/mag welding filler wire size 1.2 mm, class iii conforming to spec irs : m- 46/2020[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government / Public Sector

CTN :45737315

10 Jul, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply of solid mig/mag welding filler wire - 1.2mm dia., class 2013 iv to irs: m-46/13 with amendment no 1, grade er80s-g as per aws: a 5.28-10. shelf life: 9months from the date of receipt in stores or 12months from the date of manufacture whichever is more. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45737627

30 Jul, 2026 NA

Bareli - Madhya Pradesh

Tender For supply of copper coated co2 welding filler solid wire size 1.2 mm, as per spec. no. irs: m-46/2020 class-1, spool size & condition of wire as per is: 6419-96 (reaffirmed 2021 ) with additional requirement of precision lair winding (plw) & copper content of coating to be between 0.2 to 0.5%, weld test as per aws (sfa-5.18) section-ii part-c, cast-305 mm min. & helix 25 mm max. in spool of dia-300 mm & weight: 12.5 kgs, shelf life of material not to be less than one year from the date of manufacturing. quality plan - n.a [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government / Public Sector

CTN :45743786

10 Jul, 2026 NA

Secunderabad - Telangana

Tender For supply of isi marked, cord flexible sheathed circular 3 core with tinned or plain copper conductorspvc insulated, cores twisted together with a suitable right hand lay. the interstices may be filled with sheathing material, fillers or strengthening cards of textile or any suitable material. the size of the card shall be 0.5 sq.mm. [16/0.20 mm] conforming to is.694/2010 with latest amendments. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45716833

08 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of electrode e-309 mol-16, dia 2.5mm , electrode e- 2594, dia 4mm , electrode e-317l, dia 2.5mm , electrode e-317l, dia 3.15mm , electrode e8018-b2, dia 2.5mm , electrode e8018-b2, dia 3.15mm , electrode e8018-b2, dia 4mm , electrode e7018-1, dia 4mm , filler wire er-70sg,dia 1.6mm , filler wire er- 70sg,dia 2.4mm , filler wire, er-347h,dia 1.6mm , filler wire, er-347h,dia 2.4mm , filler wire, er- 316h,dia 1.6mm , electrode e309 mo , dia 3.15mm , filler wire er 309mo-16,dia 2.4mm , electrode e309 mo , dia 2.4mm , filler wire er-317l,dia 2.4mm , electrode e-nicr3, dia 2.5mm , filler wire er-310,dia 2.4mm , electrode e-nicr3, dia 3.15mm , electrode e- nicrfe3, dia 3.15mm , electrode e-nicrfe3, dia 2.5mm , filler wire er-cunial,dia 1.6mm , electrode e 308h- 16, dia 3.15mm , filler wire er-cunial,dia 2.4mm , electrode e 308h-16, dia 2.5mm , filler wire, er- nicrfe2,dia 2.4mm , filler wire, er-cual-a2,dia 1.6mm , filler wire, er-cunial,dia 0.8mm , filler wire er-ni- 1,dia 2.4mm , filler wire, er-cual-a2,dia 2.4mm , filler wire, er-2209,dia 0.8mm , filler wire er-nicrmo-3,dia 2.4mm , filler wire, er-2594,dia 0.8mm , filler wire er- nicr3,dia 2.4mm , filler wire er-cuni,dia 2.4mm , elctrd,wldng,aws e-7018-1,2.5mm,gg12 , filler wire er-nicu7,dia 1.6mm , filler wire er-cuni,dia 1.6mm , elctrd,wldng,aws e-505,3.15mm,gg10 , electrode e- 309 mol-16, dia 3.15mm , electrode e cunial, dia 2.5mm , electrode e-cunial,dia 3.15mm , electrode e- nicr4, dia 3.15mm , electrode e-nicr4, dia 2.5mm , electrode e-nicrmo-17, dia 3.15mm , electrode e- nicrmo-17, dia 2.4mm , electrode e-hp40nb, dia 4mm , electrode e-hp40nb, dia 2.5mm , electrode e-hp40nb, dia 3.15mm , filler wire, er-nicrmo-17,dia 1.6mm , filler wire, er-hp40nb,dia 2.4mm , filler wire, er- hp40nb,dia 1.6mm , filler wire, er-nicrmo-17,dia 2.4mm , filler wire er-70s-b2l,dia 2.4mm , filler wire er-316l,dia 2.4mm //bid details 2 / 49

State Government

CTN :45715629

14 Jul, 2026 NA

Pithoragarh - Uttarakhand

Tender For supply of 35 mm monolayer blown film plant 20inch roller size with 4 inch die , 2 inch bottom cutting sealing machine servo base double decker , handle punching machine w u d cut punch die set 5 pcs , 2hp air compressor , online stamp printer 5 inch , 5tr cooling tower , 10 hp granule mixture , pbat per kg 500 , filler per kg 180 , single die dona pattal manufacturing machine with 12inch three compartment plate die , raw material dona pattal plates

CTN :45484192

07 Jul, 2026 NA

Khammam-T - Telangana

Tender For corrigendum : supply of er cocr a stellite filler wire 2.5mm dia 1kg pack , brazing rods brass 1.6mm 5kg pack , brazing rods brass 2.5mm 5kg pack , brazing rods silver 1.6mm 5kg pack , brazing rods silver 2.5mm 5kg pack , cl rods 3.2mm 10kg pack , er 309mo filler wire 1.6mm 20kg pack , er 309mo filler wire 2.0mm 20kg pack , er 309mo electrode 2.0mm 20kg pack

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

State Government

CTN :45720713

15 Jul, 2026 2.50 Lacs

Satna - Madhya Pradesh

Tender For supply of materials for carpentry industry (volume 01) - paper tape (branded/high quality) (as per sample), welding rod (branded/high quality) (gauge 8, gauge 10), nails – gauge 14, 17, 20 (branded/high quality) (1 to 4 inches), yellow clay, chalk clay (branded/high quality) (1 kg pack), plastic cane (for chair making) (branded/high quality) (as per sample), chandras (good variety/high quality), nc thinner (branded/high quality) (5-liter can), sandpaper, 4-inch (branded/high quality) (grade 80/100), turpentine oil (branded/high quality) (1 kg packet), paint (all colors) (branded/high quality) (1-liter pack), water-based paint (all colors) (branded/high quality), oil-based paint (all colors) (branded/high quality), brush (sizes 0 to 12) (branded/high quality), brush (branded/high quality) (4-inch), handsaw (16-inch) (branded/high quality), triangular file (4-inch) (branded/high quality), plywood 12 mm (branded/high quality) 4x8, plywood 18 mm (branded/high quality) 4x8, plywood 8 mm (branded/high quality) 4x8, plywood 6 mm (branded/high quality) 4x8, sunmica (1 mm) (branded/high quality) 4x8, sunmica (0.8 mm) (branded/high quality) 4x8, iron angle/iron strip (branded/high quality) – as per size, metal cutting blade (branded/high quality) 14-inch, metal cutting blade (branded/high quality) 4-inch, nuts, bolts, and washers – all sizes (branded/high quality) (as per sample), foam 3", 32 density (3x6) (branded/high quality), foam 2", 32 density (3x6) (branded/high quality), foam 1", 32 density (3x6) (branded/high quality), sofa fabric/rexine (branded/high quality), grinder disc/stone (no. 120, 140) (branded/high quality), putty (1 kg pack), wood cutter circular blade (branded/high quality) 10-inch, gi wire (branded/high quality), broom sticks (30-inch) (good/high quality) solution (sr 505) (branded/high quality) (1 kg packet), welding goggles (black/clear) (branded/high quality), measuring tape (branded/high quality), drill bit (good quality/high quality), wooden block (good quality/high quality), teak wood (good quality/high quality), acacia (babool) wood (good quality/high quality), sheesham wood (good quality/high quality), firewood (good quality/high quality), sealer (1 kg packing), wood touch-up/filler (1 kg packing), sandpaper (grit 120, 100) (good quality/high quality), electric planer (size-specific) (branded/high quality), straight edge/siknja (3 feet) (branded/high quality), bench vice (large size) (branded/high quality), hand drill machine (600 watt) (branded/high quality), compressor gun (500g, 200g) (branded/high quality), compressor hose/pipe (branded/high quality), planer machine moulding die (all sizes) (branded company / best quality)

Filler Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

State Government

State Government