Web Analytics Made Easy - StatCounter

Fillers Tenders

Get complete information related to latest Fillers Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Fillers Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Fillers Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

State Government

CTN :45315845 Due date: 16 Jun, 202616 Jun, 2026 11.15 Lacs
Tender For painting of severely rusted ms towers for the 15nos locs of lines sub-division, araku i.e., 6nos locs. (226, 227, 235, 236, 269 & 270) of 132kv t.b. vara - araku dc line, 2nos. locations (315a & 315b) of 132kv t.b. vara - kothavalasa/gold star dc/sc line, 2nos. locations (40&41 additional cross arm sections only) and 5nos. locations (41/1(3nos. cross arms only), 41/6, 41/12, 41/14, 41/18 bottom +3 extension sections only) of 132kv araku - similiguda - tyda traction dc line with one coat of red oxide as primary and one coat of 1st grade aluminum paint as secondary and black paint to the leg portions

Central Government/Public Sector

CTN :45317842 Due date: 15 Jun, 202615 Jun, 2026 NA
Tender For supply of paint black , paint bus green , thinner , paint red oxide , paint white , paint rubber seal , paint blue , paint silver , paint red , paint yellow , paint orange , water paper 220 no , acrylic metal putty , putty blade

Central Government / Public Sector

CTN :45076868 Due date: 02 Jun, 202602 Jun, 2026 NA
Tender For corrigendum : supply of thinner f/enamel paint , two pack aliphatic acrylic polyurethane finish paint off white , zinc ethyl silicate primer is 14946: 2001 , two pack epoxy polyamide mio undercoat , enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 , ready mixed paint, air drying, red oxide - zinc phosphate, priming as per is 12744

Central Government/Public Sector

CTN :44728322 Due date: 27 May, 202627 May, 2026 7.85 Lacs
Tender For bid to ras supply of naval store items - dry chemical powder 05 kg pack , anti cockroach gel , emery cloth abrasive 11 x 9 is grit 36279 mm x 227 mm , cloth coated pvc 102 cm wide , bucket plastic 20 ltrs capacity , bucket plastic 15 ltrs capacity , brush scrubbing large , boric powder , bleaching powder stablised , lugs brass , oil and grease remover , rope polypropylene 08 mm isi mark , rope polypropylene 6 mm isi mark , rope polypropylene 04 mm isi mark , petroleum jelly , paint brush 3 inch , paint brush 1 by 2 inch 13 mm , paint brush 1 inch , gloves leather a , emery cloth abrasive cloth is grit 36 , twine sewing fine , thinner , chain ni silver for call boatswain , call boat swains , tape measuring steel 15 meter in metallic case , white spirit , turpentine oil , tape roll seal teflon thread of 12 mtrlength 0 point 1 mm x 1 point 25 cm , tape transparent water proof self adhesive cellulose film 38 mm wd , soap hard yellow , tape transparent 2 inch , dvd , envelope cloth coated 12 inch x 16 inch , envelopecloth coated 10 inch x 14 inch , envelope cloth coated 9 inch x 12 inch , envelope size 10 inch x 14 inch , envelope size 6 inch x 12 inch , envelope size 4 inch x 10 inch , tape transparent 1 inch , brown sheet laminated , cleaner white toilet , duster cloth a , cloth sponge 18 cm x 20 cm , brush sweeping hand soft broom , super mop refils , polish metal brass , feather broom , broom country , super mop , tray paint roller , glass cleaner 500 ml , red oxide iron geru pigment powder iron oxide natural red , rags cotton coloured , cotton waste , hand wash liquid , disinfectant fluid white or black phenoil , cleaning liquid for utensils , lime slacked , cleaning bar for utening vim 500 gm pack , blue laundry isi mark ) /bid number : gem/2026/b/7388328 * /dated: 02-04-2026 & & / bid document 1 / 47

State Government

CTN :45198711 Due date: 28 May, 202628 May, 2026 45.0 Thousand
Tender For corrigendum : supply of enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3) , ready mixed paint, air drying, red oxide zinc chrome, priming (v2) as per is 2074 (q3)

CTN :45296154 Due date: 01 Jun, 202601 Jun, 2026 NA
Tender For supply of gun pit with ohp - tmt bar fe 550 grade 8mm dia , tmt bar fe 550 grade 10mm dia , tmt bar fe 550 grade 12mm dia , tmt bar fe 550 grade 16mm dia , binding wire of 0.9mm dia , plywood 8 feet x 4 feet x 18mm bwr grade , plywood for roof shuttering 8mm waterproof , plywood for wall shuttering 14mm , scaffolding pole adjustable 7 feet long , nails 2 inch, 3 inch and 4 inch 10 kg each , pre-fabricated mild steel door of size 5300mm x 3500mm outer frame made out of isa 50x50x6mm and door shutter frame of isa 40x40x6mm and all as stiffner of isa 40x40x5mm as per drawing , pre- fabricated mild steel door of size 1300mm x 6000mm outer frame made out of isa 50x50x6mm and door shutter frame of isa 40x40x6mm and all as stiffner of isa 40x40x5mm as per drawing , app bitumen membrane sheet of grade 2504 thickness 3.0mm type film, size 20mx1m, minumum weight 2.25kg per sqm , deck sheet curved shape 1.20mm tr-50 including all necessary clamps fittings and fixtures , quick setting compound , water proofing compound in 1 kg packing , fire resistance paint for internal surface , fire resistance primer for internal wall surfaces , synthetic enamel painting to steel surfaces , red oxide primer. , bitumen 80 oblique 20 grade , hdpe pipe 75mm dia best quality , fire extinguisher a and b and c type portable net 2 kg capactiy cylindrical isi marked , supply solar lantern model no ms122 solar lantern contains battery, solar panel, led bulbs , lighting conductors set complete with all accessories as per details given , prefab steel ms plate of size 1000x1000x4mm to frame of size 1050x1050mm , hdpe hose pipe 25mm dia corrosion resistant for water supply pumping water with min thickness of 0.25mm with working pressure 14.22 psi and bursting pressure 28.44 psi , 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set , pcc solid block 400x200x200mm , 100mm thick interlocking tiles machine pressed precast concrete paver block , cement ppc oblique opc 53 grade in poly bag of 50 kg each , sand coarse conforming to is-383 , stone aggregate coarse 20 mm conforming to is-383 , stone aggregate coarse 40 mm conforming to is-383 , hesco basket , transparent pipe 5mm dia bore for water leveling , iron bar 600mmx16mm , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle isi marked , fish line best quality , wood cutting blades , iron cutter blades 14 inch , plumb bob iron best quality , galvanised iron pan mortar 18 gauge 16 inch dia minimum weight of 1 kg , rammer earth with handle , picks axes with chiesel and point ends , showel square nose 14 gauge tata high carbon steel , painting brush 100 mm best quality , synthetic tarpaulin 550 gsm of size 30ft x 30ft , multipurpose non-slip rubber reusable gloves , brick trowel steel 305 mm , heavy duty openable props oblique scaffolding made of ms pipe of 60 and 48mm dia , ms centering plates of size 90cm x 60cm of thickness 14 guage , portable ms body needle vibrator machine with power 3 hp to 5 hp

CTN :45138683 Due date: 27 May, 202627 May, 2026 1.26 Crore
Tender For bid to ras corrigendum : supply and construction of superstructure of ug coy comd post , supply and construction material , supply and construction electronic , supply and construction of earthing items , supply and construction of lightening conductor , supply and construction of furniture items - cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1969 (make-birla gold/ambuja /ultratech/acc/jk/dalmiya) , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , hard core 63-90 mm , stone boulder 9 to 12" , mild steel bars of size 16 mm and above dia conforming to is 432 (part (1) 1982 (make tata/sail/jsw) , mild steel bars of size 12 mm and above dia conforming to is 432 (part 1) 1982 (make tata/sail/jsw) , mild steel bars of size 10mm dia conforming to 15 432 (part 1) 1982 (make tata/sail/jsw) , mild steel bars of size 8 mm and above dia conforming to is 432 (part 1) 1982 (make tata/sail/jsw) , water proofing compound confirming to is 2645-2003 (make pidilite/dr fixit/fevicol) , gl binding wire (tata/sail/jsw) , wooden plank for shuttering lind class wood of size 3.0x0.30x0.026 , wooden scantling various size , steel props of size 2 mtr long. 80 mm dia, adjustable upto 4 mtr height nad as directed , nails various sizes , (a) ms rhs of size 100x50x45 , (b) ms rhs of size 50x25x2.9 , (c) ms rhs of size 96x48x3.2 , (d) ms flat 40x5 mm thick for wind the tata/sail.jsw , (e) ms plate of size 10mm thick , idi ms plate of size 8mm thick , 10) m5 angle of size 40x40xň for cleat , (f) ms plate of size 12mm thick , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia mats including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete ali as directed , ppgi sheet, 0.55 mm thick of size 10ft x3 ft of make sail/tata/jindal incl treating galvanised surface with mordant solution and two coat of synthetic camoglage paint over one coat of red oxide primer of make berger/asian/nerolac) , ppgi noge sheet of 0.50mm thick of 90cm wide of make sail/tata/jindal incl treating galvanised surface with mordant solution and two coat of synthelic camoglage paint over one coat of red oxide primer of make(berger/asian/nerolac) , self taping steel screw half thread with rawl plag of 1 1/2 size (is! marked) (100 nos/pkt) , door size (2000x1000mm double wal ms sheet for door (2mm thick) frame (chowkat) made of steel equal angle iron 55x55x6mm (151 grade) shutter made up of steel equal angie iron frame 35x35x5mm (151 grade) flat con for stiles (75mm width and 5mm thick) holdfast 450mm long welded either side of anglle iron frame including hinges (06 nos) , tower bolt 150mm long 104 nos: bow handles (04 nos) and sliding bolt 12mm dia 300 mm long with lockung arrangernent complete both side and openable outside complete along the wall. , note the door shall be made of steel suitable painted in olive green colour with two coats of red oxide primer , ventilator with grill of size (1500 x 600mm) ventilator (loop hole) frame for steel angle of size 35x35x5mm (1s1 grade) gral made of tmt bar 12mm dia with weiding the items shall be suitably painted with weather resistance and fire prouf paint over one coat of red uxide primer (make tata/spat/sail , acrylic emulsion paint of approved brand on new concrete surface of make berger/asian/nerolag , painting brush 4"(15) marked) , bila white wall care putty (water resistant white cement based putty) for concrete/mortar walls/ceiling make jk putty birla white , cerment hased paint snowcemi make berger/nemlac/asian) , o bound distemper (washable quality) of proprietary brand of (make , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick make (johnson kajana orient) tist quality confrorning to 15 150-2006 , white cement confirming to 18 8042/1969 (make acc/birla white ambuja) , curtain arrangement drapery and ind made of 25 mm dia and 1600 mm long pre coated ms pipe with fancy type end

CTN :45288199 Due date: 06 Jun, 202606 Jun, 2026 10.00 Lacs
Tender For supply of lok nirman samagri for f.y. 2026-27 - opc cement, ppc cement, khajuraho sand, son sand, local potter-made bricks, allahabad chimney bricks, chimney bricks (20x10x20 cm), stone blocks (20x20x10 cm), 40mm crushed gravel, 20mm crushed gravel, 10mm crushed gravel, 6mm crushed gravel, crushed stone dust, hard kankar (nodular lime), soil, stone slabs (20mm), stone slabs (30mm), stone slabs (40mm), stone dasas (100mm), shuttering (columns/beams, etc. – iron/plywood), shuttering (roof – iron/plywood), shuttering (roof – wood), tensile steel rebar (10mm dia), tensile steel rebar (12mm dia), tensile steel rebar (16mm dia), tensile steel rebar (20mm dia), binding wire, mesh netting (size: 25x25mm), chain link fencing, fencing wire (6mm bar / g.i. barbed wire), m.s. grills and meshwork, lime, white cement, distemper (for wall painting/finishing), red oxide (for painting iron/metal materials), varnish (for painting/finishing wood materials), paint (emulsion/iss/ssd/asian deluxe), turpentine oil, concrete pole (0.1 x 0.1 x 1.5m), concrete pole (0.1 x 0.1 x 0.6m), 300mm. 450 mm dia. cement concrete pipe np4 (2.5 kg/cm²), 900 mm dia. cement concrete pipe np4 (2.5 kg/cm²), 1200 mm dia. cement concrete pipe np4 (2.5 kg/cm²), 600 mm dia. cement concrete pipe np4 (2.5 kg/cm²), 300 mm cement concrete pipe np3 (2.50 kg/cm²), 450 mm cement concrete pipe np3 (2.50 kg/cm²), 600 mm cement concrete pipe np3 (2.50 kg/cm²), painting brush 2-inch, painting brush 4-inch, high-quality plastic bucket 5-liter, translucent acrylic plastic sheet (3 mm thick), paver block (80 mm x 100 mm), wall putty.

CTN :44741125 Due date: 29 May, 202629 May, 2026 NA
Tender For bid to ras supply of enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3) , ready mixed paint, air drying, red oxide - zinc phosphate, priming as per is 12744 (q3)

CTN :45289871 Due date: 06 Jun, 202606 Jun, 2026 40.00 Lacs
Tender For stage contract for carrying out various electrical maintenance works including sitc, itc of various line materials and distribution substations and dismantling of existing deteriorated out lived electrical infrastructure for the year 2026-27 under th - supply, installation, testing and commissioning of 3-phase 25 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 63 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 100 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 200 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 250 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, sitc of 11 mtr long st poles 410, sp-56 including transportation, manual, mechanical carriage, delivery at site with pit excavation, refilling the pit with soil, boulders., sitc of 9 mtr long st poles 410, sp-33 including transportation, manual, mechanical carriage, delivery at site with pit excavation, refilling the pit with soil, boulders., sitc of 8 mtr long st poles 410, sp-15 including transportation, manual, mechanical carriage, delivery at site with pit excavation, refilling the pit with soil, boulders., sitc of 8 mtr long pcc poles including manual, mechanical carriage, excavation of pole pits with inscription of permenent marking on each pole "name of scheme-2019-20/xx" (xxx mean pole numbers say 01,02...) in white paint in backgound of green paint at conspicious place, providing & fixing of pole earthing as per rec standard as per j-1 (spiral earthing) drawing, supply,fixing of spike earthing rod 20mm 2,5 mtr long with gi strip (25x3)mm, supply and painting of each pole 1 coat red oxide paint and 2 coats of aluminium paint (@ 1 ltr/pole red oxide paint and 1 ltr/pole aluminium paint), providing, errection, testing & commissioning of channel cross arms, v-cross arms, sub-station channels & angle iron braces, transformer beltings, including back clamps for fixing cross arms etc fabricated out of galvanized iron of different sizes (rec standard) & to be fixed with gi nuts & bolts and washers., providing, errection, testing & commissioning of channel cross arms, v-cross arms, sub-station channels & angle iron braces, transformer beltings, including back clamps for fixing cross arms etc fabricated out of mild steel of different sizes (rec standard) & to be fixed with gi nuts & bolts and washers., providing & and fixing of 11 kv pin insulators (polymer) with pins ( 5 kn), providing & fixing of 11 kv, g.o ab switch , 3-phase, 200a (09 insulator post type) with arragement for pad locks & operating rod . the operating rod should be g.i pipe (b-class) of 25 mm dia of requisite length., providing & fixing of 11 kv horn, gap fuse 3-phase 100a, providing & fixing of 11kv link set 3-phase, 200 a (station type), sitc of 11kv isolator double break, 3-pole, 630 amps, horizontal mounting type , with earth switch, providing & fixing supply and installation of gapless surge arrestor,9 kv,10 ka, la with (polymer) housing, station type, providing & fixing of lt fuse set of suitable capacity for 63kva,100kva,200kva (as per tender drawing attached), providing & fixing of 11 kv disc insulators (polymer) complete with fitting( 45 kn), providi
 Loading, Please wait...

Connect us via What's Up