Latest filling system Tenders | Government filling system Tenders

Central Government/Public Sector

CTN :45548872

17 Jul, 2026 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : supply and fitment of follower plate assembly part no-66516-1, suitable for ingersoll rand aro make grease pump of grease filling system and leading parameter machine, make- ingersoll rand [ warranty period: 30 months after the date of delivery ] ]

CTN :45476070

15 Jun, 2026 2.37 Crore

Saharanpur - Uttar Pradesh

Tender For audyanik proyog avam prashikshan kendra saharanpur mein nirmaanadhin shahad utkrishthta kendra se sambandhit machinery or parts ki apoorti or establishment ka karya - supply & installation of automatic honey bottling filling machine with sensor based calibrator including with filling range (50 grams to 1000 grams), outout/min (any size within range 3000 to 5000 bpd), filling system (pneumatic vmp system synchronize with servo motor), direction of movement (left to right), number of head/syringe (single), drop controller (y- pneumatic stopper), calibration of machine (automatic with sensor), inlet material stopper (fg valve), feed tank (direct connected), feed tank overflow controller (float type), material feed in m-tank (automatic), heating arrangement in m-tank (water bath system), material shaker in m-tank (electrical shaker), bath temperature & material temperture monitoring system (full auto-control with ccp), electric spply (230 cm v/50hz), tempreture controller (pid), machine dimensions (250 cm x 100 cm x 210 cm (approx) and net weight (300 kg). etc all complete with isi marked., supply & installation of automatic linear capping machine including with output/hour (any size with range 4000 bpd), direction of movement (left to right ), machine dimensions (180 cm l x 90 cm w x 170 cm h (approx)), sensor (panasonic), pneumatic accessories (spac) and no bottle- no cap (yes). etc all complete with isi marked., supply & installation of automatic round bottle sticker labelling machine including with output/hour (10000 bpd), direction of movement (left to right), controlling (micro controller base mm interface), conveyor motor (0.25 hp/415 v/ 50 hz), pressing device motor (60 watt / 220 v/ 50 hz), servo motor (750 watt), label accuracy (+/-1mm), gap sensor (u-type), bottle spacer (electronic), variable speed (40 bpm-max), hmi & plc (7 inch coloured touch pad type), pneumatic (spac), pressure roller (sillicon), adjustment (lead screw), label size (up to 100 mm width), bottle dia (up to 120 mm dia), batch counter (yes) and online data indication (yes) etc. all complete with isi marked., supply & installation of air compressor including with type (reciprocating), tank volume (250 ltr), pressure range (10 kg/ cm 2), no of head-(02 nos.), type (industrial) and operation (continue) etc. all complete with isi marked., supply & installation of induction sealing including with automatic induction sealing machine etc. all complete with isi marked., supply & installation of turn table including with 750 mm dia turn table moc ss304, motor - 0.5 hp/440 vac, vfd - invt/delta and model -cgmp etc. all complete with isi marked., supply & installation of packing conveyor including with 10 feet long packing coveyor, width of conveyor 300 mm, motor - 0.5 hp/440 vac and model - cgmp etc. all complete with isi marked., supply & installation of auto honey feed pump including with automatic honey feed system for filling machine from plant etc. all complete with isi marked., supply & installation of bottle washing machine including with automatic bottle cleaning machine tilting action type etc. all complete with isi marked., supply & installation of particle inspection table including with online particle checker etc. all complete with isi marked., supply & installation of online printer including with online ink jet printer etc. all complete with isi marked., supply & installation of slate chain conveyor including with ss304 slate chain conveyor, motor - 0.5 hpx 3 nos, vfd - 3 nos and guider - as per design etc. all complete with isi marked., supply & installation of automatic wax sheet foundation mill including with sheet making roller set (cell size 5.4 mm, length ,600 mm, dia 200 mm), cold water circulation system 0.5 hp, conveyor belt length - 300 mm, sheet cutting system, water cooling system 1.5 - ton cap, wax malting tank, wax filtration system, ss tray, ss bucket, operation by hmi, dat

Corporations And Associations And Others

CTN :45127816

11 Jun, 2026 NA

Ludhiana - Punjab

Tender For corrigendum : supply, installation and commissioning of automatic smp wmp powder filling machine in 9 10kg tin with automatic nitrogen filling system cap.100 tin per hour at verka ludhiana dairy

State Government

CTN :45310359

13 Jun, 2026 NA

Koradi - Maharashtra

Tender For contract for the work of operation & maintenance of dry fly ash filling system through transfer & dispensing vessel to remote silo s installed at ash handling plant of 3x660mw units, ktps, koradi

CTN :45236118

02 Jun, 2026 34.64 Lacs

Murshidabad - West Bengal

Tender For supply and installation and commissioning of different machineries and tools of dihipara beekeeping cluster, dihipara, murshidabad under wbkvib during the year 2026 27 2nd call - supply and installation and commissioning of raw honey storage tank specification:fabricated from 304 grade 3 mm thick stainless-steel sheet, all joins argon welded and polished. one number manhole is provided on top. both top and bottom is dished type.capacity 1200 kg, supply and installation and commissioning of honey processing plant 1. ms control panel - 012. ss channel and angel structure - 013. pre heating tank in coil shape - 014. microfine replaceable cartridge filter press with gear pump - 015. processing tank with 1 nb coil - 016. falling film evaporator with ms stand - 017. wate ring vaccum pump 3 hp + water pump - 028. cooling tank with 1 nb pipe coil - 019. settling tank - 0210. set of ss pipes for honey piping - 0111. set of gi pipes with specials for water pump fitting -01specification:1. one no stainless steel prefilter tank having thickness of 1.6mm with volumetric, capacity of 500 kg along with 500 micron mesh.2. gear pump: made by m/s. rotodel company with full stainless steel body and gears. basic output capacity: 2000 its/hour. it will be suitably reduced to give required output.3. drive motor: 1.00 h.p. 3 phase 440 vol tefc 1440 rpm make crompton or siemens.4. pre-heating tank: made from 2.0 mm thick stainless steel sheet with heater.5. microfine filter: full stainless steel self locking high pressure filter which has poly propylene filters made of 40 micron size,6. processing tank: made from 2.0mm thick stainless steel sheet. one set of coil will be provided for processing tank.7. crompton make water circulation pump 0.50 hp, mono block, with 18 m head, 230 volt ac single phase mechanical seal.8. falling film evaporator: made from 3.0 mm thick stainless steel sheet, with concentric cone in side. subjected to vacuum and ensuring falling film, to evaporate moisture.9. cooling tank: made from 1.5 mm thick stainless steel sheet, exactly same as pre-heating tank but without heaters.10. settling tank: made from 2.0 mm thick stainless steel sheet, top and bottom dished ends fully leak proof, bottom drain for honey withdrawal.11. control panel: having cut off mcb, control circuit fuses, and mcb in each time to protect the wiring, with brass earthing bolt to prevent electric shocks.12. water ring vacuum pump: 1.0 hp, 3000 rpm, 440 volts ac, tefc. kirloskar make with 750+mm 4g vacuum.13. ms chasis made out of 75x40 ms channel in two parts., supply and installation and commissioning of semi automatic volumetric honey filling machine, twin head, stroke typespecification:this is specially designed to fill squash/juice in bottles. all contact parts are made from 304 type stainless steel materials, supported on mild steel angle structure, covered with stainless steel sheet. the machine is suitably arranged to upper and lowering of filling head with nozzle so that there is no spillage of squash or juice while filling. this helps to fill in accurate measure.no bottle no filling system.operated by 1 hp motor with gear box.filling capacity: 100ml to 500 ml.filling speed: 14/16 bottles per minute., 500 ml to 1000 ml, supply and installation and commissioning of twist off lug cap sealing machine:specification:for 100% leak proof airtight sealingno hand pulling system.this machine is ideal way to hermetically seal bottles products with twist off/vacuseallug caps to preserve taste and flavour.semi-auto-manual and pneumatic working.capacity: 600 bottles/hr of 53 to 63 mm caps. (for 200 and 400 gm. pickle)supply is complete with air compressor., supply and installation and commissioning of weight scale digital display specification:capacity: 100 kgreadability: 10 gm, supply and installation and commissioning of digital refractometer, supply and installation and commissioning of shrink tunnel specification:seals pp/pvc shrink film.separate controls for h

corporations/Associations/Others

CTN :45034145

27 May, 2026 43.16 Lacs

Jhansi - Uttar Pradesh

Tender For corrigendum : providing of construction of drain for 2x210 mw ash water recirculation system at ptpp, parichha. - engaging jcb on hire bases including hire fuel driver helper etc. complete. , clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. , demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of material within 50 metres lead as per direction of engineer-in-charge in lime mortar , earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. , filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. , providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) , "centering and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs, landings, balconies and access platform" , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars , random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : cement mortar 1:6 (1 cement : 6 coarse sand) , brick work with fly ash (non modular) bricks of class designation 7.5 in foundation and plinth incement mortar 1:6 (1 cement : 6 coarse sand) , 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) , supplying and filling in plinth with jamuna sand under floors, including watering, ramming, consolidating and dressing complete. , "hire charges of pump set of capacity 4000 litres/hour for dewatering which include cost of services of operating staff, cost of lubricating oil, diesel / petrol/ kerosene oil , other consumables for running the plant and machinery. the hire charges of plant machinery on per day basis are for single shift of eight working hours." , providing and laying non pressure np-4 class (heavy duty) r.c.c. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 900 mm dia rcc pipes.

CTN :45145136

21 May, 2026 NA

Ludhiana - Punjab

Tender For supply, installation & commissioning of automatic smp/wmp powder filling machine in 9/10kg tin with automatic nitrogen filling system cap.100 tin per hour at verka ludhiana dairy

CTN :44841156

18 Apr, 2026 1.22 Crore

Alappuzha - Kerala

Tender For re tender for supply, installation, commissioning and qualification of fully automatic mother tincture filling system and its line machines - re tender for supply, installation, commissioning and qualification of fully automatic mother tincture filling system and its line machines at m/s. homco's new factory building, valiyakalavoor

Central Government/Public Sector

CTN :44559272

10 Apr, 2026 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : rate contract for supply of portable sf6 gas filling and evacuation system. - rate contract for supply of sf6 gas filling system for gis breaker application for 18 months from approval at bhel, bhopal.