Latest filter press Tenders | Government filter press Tenders

Central Government/Public Sector

CTN :45176319

17 Jun, 2026 NA

Bhilai - Chhattisgarh

Tender For bid to ras providing of custom bid for services - operation and up-keeping jobs in filter press area of bf-8 in all the three shifts

CTN :45551745

24 Jun, 2026 15.0 Thousand

Kota - Rajasthan

Tender For supply of oil filter , fuel filter , fuel filter assy 3 pin , air filter , pressure plate assy , clutch plate assy , head lamp assy

CTN :45384476

17 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For corrigendum : purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45502052

14 Jun, 2026 NA

Kollam - Kerala

Tender For supply of filter cloth - filter press sheet (plate & frame type)

CTN :45214172

13 Jun, 2026 7.40 Lacs

Durg - Chhattisgarh

Tender For corrigendum : tender for supply of 165 kld bar screen , 165 kld oil skimmer unit , 165 kld mbbr media , 165 kld filter press cloth , 165 kld diffusers , 165 kld tube settler media

Central Government/Public Sector

CTN :45470235

08 Jul, 2026 NA

Duliajan - Assam

Tender For tender for supply of low pressure low temperature (lplt) , 04-cells filter press , differential sticking tester , digital moisture analyzer , electronic balance for ofc & analytical laboratory , invasion test apparatus

State Government

CTN :45460815

12 Jun, 2026 NA

Dumka - Jharkhand

Tender For quotation for rate of materials - stone boulder of size 150 mm and below at quarry supply of quarried stone 150-200 mm size for hand broken at quarry boulder with minimum size of 300 mm for pitching at quarry gravel/quarry spall at quarry gelatin 80% jute netting, open weave, 2.5 cm square opening for seeding and mulching random rubble stone sand bags (cost of sand and empty cement bag) square rubble coursed stone stone bricks of size (i) 250 mm x 125 rım x 100 mm (ii) 250 mm x 125 mm x 125 mm (i) g.i. wire (8 to 10 swg) (ii) black annealed (8 to 10 swg) binding wire (i) annealled wire (20 to 25 gauge) (ii) black annealed (20 to 25 gauge) expanded metal (18 gauge) 40 mm x 25 mm x 75 mm wide bituminastic board (for use as per expansion joint 1.5.1838 1938 filter) (i) 25 mm thick 150mm dia r.c.c.np2 perforated pipe pressure release valve (1) safety valve (ii) pocket valve cost of burnt clay pipe of internal dia 31.70 mm (11/4") external dia 38 mm (11/2") (1)100 mm long (ii)225 mm long fuse coil bolts 20 mm dia 25 cm long nuts and bolts 16 mm dia375 mm long with washer etc palm leaves check valve 38 mm dia. 38 mm dia. water hose 30m long nx core bit 48 cts(imp) nx core bit 38 cts(imp) nx tc bit bx tc bit nx st reamer cell 6.5 cts(imp) bx st reamer cell 6.5 cts(imp) good quality wooden core box 3 metre long x 0.85 metre wide x0.15 metre deep with longitudinal compartment to accommodate 5 rows of 3 metre long cores ie. total 15 metre

State Government

CTN :45434640

11 Jun, 2026 NA

Palamau - Jharkhand

Tender For e- quotation for scheduled item rate - stone boulder of size 150 mm and below at quarry, supply of quarried stone 150-200mm size for hand broken at quarry, boulder with minimum size of 300mm for pitching at quarry, gravel/quarry spall at quarry, gelatin 80%, jute netting, open weave, 2.5 cm square opening for seeding and mulching, random rubber stone, sand bags (cost of sand and empty bag), square rubber coursed stone, stone bricks of size (i) 250 mm x 125 mm x 100 mm(ii) 250 mm x 125 mm x 125 mm, (i) g. i wire (8 to 10 swg) (ii) black annealed (8 to 10 swg), binding wire (i) annealed wire (20 to 25 gauge) (ii) black annealed (20 to 25 gauge), expanded metal (18 gauge) 40 mm x 25 mm x 75 mm wide, bituminastic board (for use as per expansion joint i.s 1838-1938) filter (i) 25 mm thick, 150 mm dia. r.c.c np2 perforated pipe, pressure release valve, (i) safety valve (ii) pocket valve, cost of burnt clay pipe of internal dia 31.70 mm (11/4 ) external dia 38 mm (11/2 ) (i) 100 mm long (ii) 225 mm long, fuse coil, bolts 20 mm dia 25 cm long, coal tar, nuts and bolts 16 mm dia 375 mm long with washer etc, palm leaves, check valve 38 mm dia., 38 mm dia. water hose 30m long, nx core bit 48 ctc (imp), nx core bit 38 ctc (imp), nx tc bit, bx tc bit, nx st reamer cell 6.5 cts (imp), bx st reamer cell 6.5 cts (imp), good quality wooden core box 3 metre long x 0.85 metre wide x 0.15 meter deed with longitudinal compartment to accomodate 5 rows of 3 metre long cores i.e lotal 15 metre .

State Government

CTN :45439425

15 Jun, 2026 NA

Jamnagar - Gujarat

Tender For unit rates of composite items forrecharge scheme for defunct privatetube wells/wells for groundwaterrecharge in jamnagar dist. underpanchayat irrigation division,jamnagar for the year 2025-26. (six attempt) - jungle cutting and site clearing., for filter trench, excavation for pipeline laying up to 1.5 meter depth in all strata including providing all leads and lifts for excavated soil., for filter trench, excavation for pipeline laying from 1.5 meter to 3.0 meter depth in all strata including providing all leads and lifts for excavated soil.scope of work, providing tarpaulin sheet of 250 gsm thickness, pebbles of size 5 to 10 millimeter (river pebbles)., gravel of size 2 to 5 millimeter, activated charcoal of size 3 millimeter, coarse sand, 150 millimeter diameter pvc pipe(4 kg/cm2)., 1200 millimeter diameter rcc np-3 class pipe, brick masonry work in cement mortar (1:4) inside 1200 millimeter diameter r.c.c. pipe., backfilling of excavated trench for pipeline with soil, disposal of excavated soil obtained from defunct well, providing and fixing grill cover made of angle 35 x 35 x 5 millimeter and wire mesh, brick masonry work in cement mortar (1:6) for 9 inch thick parapet wall around closed well, pressurewashing tubewell by air compressor of 500 cubic feet per minute / 150 pounds force per square inch capacity, oil painting to exposed portion of tubewell pipe, providing and fixing tubewell type v wire screen isi approved pipe (opening size 1.5 to 3.0 mm)., welding of v wire screen pipe with tubewell pipe, jungle cutting and site clearing., for filter trench, excavation for pipeline laying up to 1.5 meter depth in all strata including providing all leads and lifts for excavated soil., for filter trench, excavation for pipeline laying from 1.5 meter to 3.0 meter depth in all strata including providing all leads and lifts for excavated soil.scope of work, providing tarpaulin sheet of 250 gsm thickness, pebbles of size 5 to 10 millimeter (river pebbles)., gravel of size 2 to 5 millimeter, activated charcoal of size 3 millimeter, coarse sand, 150 millimeter diameter pvc pipe(4 kg/cm2)., 1200 millimeter diameter rcc np-3 class pipe, brick masonry work in cement mortar (1:4) inside 1200 millimeter diameter r.c.c. pipe., backfilling of excavated trench for pipeline with soil, disposal of excavated soil obtained from defunct well, providing and fixing grill cover made of angle 35 x 35 x 5 millimeter and wire mesh, brick masonry work in cement mortar (1:6) for 9 inch thick parapet wall around closed well, pressurewashing tubewell by air compressor of 500 cubic feet per minute / 150 pounds force per square inch capacity, oil painting to exposed portion of tubewell pipe, providing and fixing tubewell type v wire screen isi approved pipe (opening size 1.5 to 3.0 mm)., welding of v wire screen pipe with tubewell pipe, jungle cutting and site clearing., for filter trench, excavation for pipeline laying up to 1.5 meter depth in all strata including providing all leads and lifts for excavated soil., for filter trench, excavation for pipeline laying from 1.5 meter to 3.0 meter depth in all strata including providing all leads and lifts for excavated soil.scope of work, providing tarpaulin sheet of 250 gsm thickness, pebbles of size 5 to 10 millimeter (river pebbles)., gravel of size 2 to 5 millimeter, activated charcoal of size 3 millimeter, coarse sand, 150 millimeter diameter pvc pipe(4 kg/cm2)., 1200 millimeter diameter rcc np-3 class pipe, brick masonry work in cement mortar (1:4) inside 1200 millimeter diameter r.c.c. pipe., backfilling of excavated trench for pipeline with soil, disposal of excavated soil obtained from defunct well, providing and fixing grill cover made of angle 35 x 35 x 5 millimeter and wire mesh, brick masonry work in cement mortar (1:6) for 9 inch thick parapet wall around closed well, pressurewashing tubewell by air compressor of 500 cubic feet per minute / 150 pounds force per square inch capacity, oil painting t

CTN :45433035

15 Jun, 2026 29.0 Thousand

Faridkot - Punjab

Tender For supply of oil filter , field coil , bush set , fuel change over switch , gear lever kit , pinion , bearing , clutch master cyl , pre filter , fuel filter , pressure pipe

Filter Press Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government