Latest filter tool Tenders | Government filter tool Tenders

State Government

CTN :45289480

30 May, 2026 NA

Palamau - Jharkhand

Tender For renovation of electro mechanical items for rural ws scheme, lesliganj - part a (raw water p/plant mali river at sitadih ), cost towards repairing and overhauling of 50 h.p. v.t. pump set multiple stage ball assembly s/f impeller g.m. bush as per sample 5 nos each, s/f housing bush as per sample. replace in spider rubber cutless bush 5 nos, replacing of 25mm dia. 5 feet long s.s. line shaft 4 nos with s.s. socket . transportation charge from site to work shop vice versa including tools tackles and labour charges for lifting & lowering v.t. pump before and after repairing work etc all complete at pumping plant., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots of stator by brush & petrol then complete rewinding of 50 h.p. 440 volts, 50 c/s, star delta, 3 phase hollow shaft v.t. motor by supplying super enameled copper wire & binding, tapping varnishing, heating, testing on full load and repairing of stator & rotor, changing of bearings as per sample skf make with including the deduction of cost of burnt copper wires and transportation charges from p/plant to workshop and back to the same . including tools & tackles and labour charges etc all complete at p/plant., cost towards repairing/ replacement of 200 amp motor control panel board consisting of incoming feeder mccb 200 amp 1 no. and outgoing feeder mccb 100 amp 2 nos, timer 1 no., thermal over load release relay 2 nos. supplying and fitting of digital volt meter (0-500v) squared type 2 nos, ammeter (0-125amp) squared type 2 nos and replacement of phase indicator lamp 3 nos. including internal wiring etc all complete., cost towards supplying & fitting 35 mm2 3 core copper conductor 15 mtr panel to motor., cost towards supplying & fitting 60 watt led street light (jsor-m840), part b (clear water lesliganj.), cost towards repairing/ replacement of 200 amp motor control panel board consisting of incoming feeder mccb 200 amp 1 no. and outgoing feeder mccb 100 amp 3 nos, timer 1 no., thermal over load release relay 3 nos. supplying and fitting of digital volt meter (0-500v) squared type 2 nos, ammeter (0-125amp) squared type 2 nos and replacement of phase indicator lamp 3 nos. including internal wiring etc all complete., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots of stator by brush & petrol then complete rewinding of 20 h.p. 440 volts, 50 c/s, star delta, 3 phase induction motor by supplying super enameled copper wire & then tapping varnishing, heating & testing on full load and repairing of stator & rotor, changing of bearings as per sample skf make with including the deduction of cost of burnt copper wires and transportation charges from p/plant to workshop and back to the same . including tools & tackles and labour charges etc all complete at p/plant., cost for repairing of 20 h.p. c/f pump with m/s/f s.s. shaft as per sample 1 no. c.i. gland tightner 2 nos, c.i. bearing housing 2 nos, ms. check nut 2 nos, c.i. neckring 2 nos, ball bearing s.k.f. as per sample 2 nos, all labour tools & tackles and materials with loading and unloading transporting charge from site to workshop & vice versa., cost towards varnishing, heating of winding & greasing of both side ball bearing of 25 h.p. induction motor 3 phase, 1440 rpm, volt 410 10% 50 cycle along with supplying & fitting of tyre coupling 2 nos, then testing on full load at site including supply of all labour tools and tackles., cost for repairing of 25 h.p. c/f pump with m/s/f s.s. shaft as per sample 1 no. c.i. gland tightner 2 nos, c.i. bearing housing 2 nos, ms. check nut 2 nos, c.i. neckring 2 nos, ball bearing s.k.f. as per sample 2 nos, all labour tools & tackles and materials with loading and unloading transporting charge from site to workshop & vice versa., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots o

State Government

CTN :43368597

27 May, 2026 70.00 Lacs

Nagpur - Maharashtra

Tender For bid to ras supply of establishment of fabrication laboratory fablab at nfsc d d - digital fabrication , electronic equipment , power tools , hand tools , measuring equipment , safety equipment , electronics equipment 2 , consmables mechanical , acrylic sheet , foam sheet , ply boards , adhesives , pcb drill bits , drill bits , electronics consumables , storage , infrasturcture

CTN :44147892

27 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras hiring of services for surface preparation of inclined ladders using mechanical tools

CTN :45024888

27 May, 2026 2.65 Lacs

Dehradune - Uttarakhand

Tender For bid to ras supply of smt mechanical tools for mt d d - bty charger , air compressor , bench vice , potable welding set , hand drill machine , paint spray gun , workshop tray , multi meter , socket set tool 6 , socket set tool , creeper trolley , hydraulic trolley , hydraulic trolley jack , gear box trolley jack , soldering iron , blow lamp , tap set , torque wrench , die set , tool box steel , double ended spanner , ring spanner 6 by 7 , ball pin hammer , cold chisel 10 , cold chisel 6 , brass drift , centre punch , file flat basted 12 inch , file smooth , file square , file round , scissor , cutting plier , circlip plier inside , circlip plier out side , nose plier , screw driver flat 12 , screw driver flat 10 , screw driver flat 06 , screw driver flat 04 , screw driver philips 12 , screw driver philips 10 , screw driver philips 06 , screw driver philips 04 , screw driver 2 in 1 , ellen key set hexagonal , star ellen key key set , filler gauge , filter opener big size , filter opener small , square ellen key for drain oil , adjustable spanner , 2 in 1 spanner 6 , pipe wrench 12 , steel rule ) /bid number : gem/2026/b/7483093 * /dated: 28-04-2026 & & / bid document 1 / 42

State Government

CTN :45306264

15 Jun, 2026 NA

Nagarkurnool - Telangana

Tender For supply of certain tools required for carrying out maintenance and overhauling activities pertaining to mechanical sub division-1 at slbhes, srisailam dam west, srisailam dam west nagarkurnool (dist) - 509326, telangana

Central Government/Public Sector

CTN :45208234

06 Jun, 2026 5.12 Crore

Visakhapatnam - Andhra Pradesh

Tender For environmental measures. hiring of mechanical equipment for attending miscellaneous works of operational areas in visakhapatnam port for a period of 3 years i.e. 2026 to 2029. - supply hydraulic excavator (3d) with tyre mounted with driver and fuel for clearing the unwanted materials minimum 8hrs per day from the drainages (destination/roads of vpa) as required and as directed by the engineer-in-charge,complete all hire and operational charges.all labour and materials., supply of tractor with trolley in good running condition of make tata/ashok leyland/mahindra or equivalent having a carrying capacity of 3.00 m3 with hydraulically operated body for attending miscellaneous works in port operational areas and other areas as required and as directed by the engineer-in-charge .the cost inclusive of all hire and operational charges etc.., complete.all labour and materials., hiring of suv(non a/c) tata sumo/bolero/ tavera of equivalent of higher version of model 2019 of later including drivers salaries and maintenance charges,hire and operational charges as required and as directed by the engineer-in-charge, complete with 1800km mileage per month., supply of mini excavator in good running condition of make tata/hitachi/z-axis 20 u or equivalent to work in port operational areas and other areas in port area for desiltation of all types of drains and other miscellaneous etc.., as required and as directed by the engineer-in-charge.the cost inclusive of all hire and operational charges etc..,complete., supplying of man power associate with the vans and equipments in port operational areas with necessary tools and plants etc.., as required and as directed by the engineer-in-charge,complete.all labour and materials.

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

CTN :45280136

17 Jun, 2026 4.16 Crore

Ernakulam - Kerala

Tender For supply of design and development of laser interrogator system including hardware firmware and software gui , supply of integrated laser card along with accessories and cables , supply of 5 wavelength channel master laser source assembly with dwdm module and chassis , supply of michelson interferometer assembly with acoustically isolation enclosure and cables , supply of interrogator and rtm pcbs along with cables and mechanical appurtenance and spares components , supply of standard vme 64x chassis with controller and display , development tool chain , spares and test tools , qualification test charges for laser system and interrogator unit

CTN :44823163

22 May, 2026 NA

Sagar - Madhya Pradesh

Tender For bid to ras bid to ras supply of supaxle mount emergency trolley , fire proximity suit , pvc suit , pet clean chemi boom set , oil spill dispersant spray nozzle , non sparking tools set , scba with add cylinder40 min , emergency escape set15 min dur , leak control kit , flp search light , mega phone exproof , hand siren with stand , non spark fire man axe , first aid box50 person , manual rescuciator , folding stretcher , mechanical tool kit , coldlow temperature hand gloves , electrical rubber hand gloveshtlt pair , electrical tester , chemicaloil splash proof goggles , water gel blanket , portable mefg600 lpm with inductor , 63 mm type 3 non perc hose 63 mm ss coupl , jet nozzle , curtain nozzle , universal nozzle , 200 ltr ss foam trolley , installing testing commissioning

CTN :45236118

02 Jun, 2026 34.64 Lacs

Murshidabad - West Bengal

Tender For supply and installation and commissioning of different machineries and tools of dihipara beekeeping cluster, dihipara, murshidabad under wbkvib during the year 2026 27 2nd call - supply and installation and commissioning of raw honey storage tank specification:fabricated from 304 grade 3 mm thick stainless-steel sheet, all joins argon welded and polished. one number manhole is provided on top. both top and bottom is dished type.capacity 1200 kg, supply and installation and commissioning of honey processing plant 1. ms control panel - 012. ss channel and angel structure - 013. pre heating tank in coil shape - 014. microfine replaceable cartridge filter press with gear pump - 015. processing tank with 1 nb coil - 016. falling film evaporator with ms stand - 017. wate ring vaccum pump 3 hp + water pump - 028. cooling tank with 1 nb pipe coil - 019. settling tank - 0210. set of ss pipes for honey piping - 0111. set of gi pipes with specials for water pump fitting -01specification:1. one no stainless steel prefilter tank having thickness of 1.6mm with volumetric, capacity of 500 kg along with 500 micron mesh.2. gear pump: made by m/s. rotodel company with full stainless steel body and gears. basic output capacity: 2000 its/hour. it will be suitably reduced to give required output.3. drive motor: 1.00 h.p. 3 phase 440 vol tefc 1440 rpm make crompton or siemens.4. pre-heating tank: made from 2.0 mm thick stainless steel sheet with heater.5. microfine filter: full stainless steel self locking high pressure filter which has poly propylene filters made of 40 micron size,6. processing tank: made from 2.0mm thick stainless steel sheet. one set of coil will be provided for processing tank.7. crompton make water circulation pump 0.50 hp, mono block, with 18 m head, 230 volt ac single phase mechanical seal.8. falling film evaporator: made from 3.0 mm thick stainless steel sheet, with concentric cone in side. subjected to vacuum and ensuring falling film, to evaporate moisture.9. cooling tank: made from 1.5 mm thick stainless steel sheet, exactly same as pre-heating tank but without heaters.10. settling tank: made from 2.0 mm thick stainless steel sheet, top and bottom dished ends fully leak proof, bottom drain for honey withdrawal.11. control panel: having cut off mcb, control circuit fuses, and mcb in each time to protect the wiring, with brass earthing bolt to prevent electric shocks.12. water ring vacuum pump: 1.0 hp, 3000 rpm, 440 volts ac, tefc. kirloskar make with 750+mm 4g vacuum.13. ms chasis made out of 75x40 ms channel in two parts., supply and installation and commissioning of semi automatic volumetric honey filling machine, twin head, stroke typespecification:this is specially designed to fill squash/juice in bottles. all contact parts are made from 304 type stainless steel materials, supported on mild steel angle structure, covered with stainless steel sheet. the machine is suitably arranged to upper and lowering of filling head with nozzle so that there is no spillage of squash or juice while filling. this helps to fill in accurate measure.no bottle no filling system.operated by 1 hp motor with gear box.filling capacity: 100ml to 500 ml.filling speed: 14/16 bottles per minute., 500 ml to 1000 ml, supply and installation and commissioning of twist off lug cap sealing machine:specification:for 100% leak proof airtight sealingno hand pulling system.this machine is ideal way to hermetically seal bottles products with twist off/vacuseallug caps to preserve taste and flavour.semi-auto-manual and pneumatic working.capacity: 600 bottles/hr of 53 to 63 mm caps. (for 200 and 400 gm. pickle)supply is complete with air compressor., supply and installation and commissioning of weight scale digital display specification:capacity: 100 kgreadability: 10 gm, supply and installation and commissioning of digital refractometer, supply and installation and commissioning of shrink tunnel specification:seals pp/pvc shrink film.separate controls for h

Filter Tool Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

State Government