Latest fine aggregate Tenders | Government fine aggregate Tenders

Central Government/Public Sector

CTN :40525556

09 Jun, 2025 NA

Budgam - Jammu And Kashmir

Tender For supply of fine aggregate (v2) conforming to is 383 (q3)

Central Government/Public Sector

CTN :40507545

18 Jun, 2025 83.50 Lacs

Jaduguda - Jharkhand

Tender For renovation of labs and toilets in aecs 1 in senior secondary and primary section at jaduguda - demolishing cement concrete , dismantling tile work in floors and roofs , dismantling of flushing cistern , dismantling doors, windows and clerestory windows , providing and laying plain cement concrete , providing and laying in position reinforced cement concrete work , providing and laying steel reinforcement for r.c.c. work , providing and fixing centering and shuttering , providing 15 mm thick cement plaster , providing and fixing ist quality ceramic glazed wall tiles , providing and laying vitrified tiles in different sizes , providing and applying two coats of white washing , providing and applying one coat of cement primer , providing and applying wall painting with acrylic emulsion paint , supplying and laying two or more coats painting with synthetic enamel paint , providing and fixing factory made isi marked steel glazed doors ,windows and ventilators , providing and fixing 35mm thick isi marked flush door shutters , providing and fixing isi marked oxidised m.s. handles , providing and fixing oxidised m.s. casement stays , providing and fixing water closet squatting pan , providing and fixing white vitreous china pedestal type water closet , providing and fixing isi marked oxidised m.s. tower bolt , providing and fixing glass panes , white vitreous china wash basin size 630x450 mm with a pair of 15 mm c.p. brass pillar taps. , white vitreous china wash basin size 550x400 mm with a 15 mm cp brass single hole basin mixer , providing and fixing 15 mm nominal bore c.p brass angle valve for basin mixer and geyser points , providing and fixing c.p. brass stop cock , providing and fixing c.p. brass bib cock , providing and fixing 600x450mm bevelled edge mirror of superior glass , providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats , providing and fixing 600x120x5 mm glass shelf with edges round off , providing and fixing c.p. brass toilet paper holder , providing and fixing c.p. brass shower rose with 15 or 20mm inlet , providing and fixing one piece construction white vitreous china squatting plate , providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin , 15 mm dia nominal bore , 20 mm dia nominal bore , 25 mm dia nominal bore , 75mm dia sand cast iron s and s pipe , 100 mm dia sand cast iron s and s pipe , half brick masonry with common burnt clay , providing and fixing 18 mm thick granite of any size,colour and shade , providing and fixing 10 mm thick acid and or alkali resistant tiles , providing and fixing 25mm thick cup board shutter isi marked , providing and fixing 15 mm nominal bore c.p. brass long body bib cock , providing and fixing white vitreous china laboratory sink , structural steel work in single section, fixed with or without connecting plate

CTN :40514350

06 Jun, 2025 7.92 Crore

Jhajha - Bihar

Tender For mr-n/25-26/jhajha/02 - basbutiya to basahara road, providing & fixing of working benchmark pillars 01 nos. per km & 04 nos. of reference pillars required for 1 km. as per drawings given and direction of e/i, clearing and grubbing road land ( by manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of e/i, scrarifying existing bituminous surface to a depth of 150 mm and disposal disposal of scrarified materials with a lift upto 3m and lead upto 1000m as per technical specification clause 301.4, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m & 100 m as per technical specification clause 303.1. (including royality & labour cess)., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.3 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., providing and laying bituminous macadam with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of dry lean concrete sub base over a prepared sub grade with coarse and fine aggregate conforming to is 383 , the size of coarse agg. not exceeding 25mm , agg. cememt ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 , cement content not to be less tha

State Government

CTN :40482426

07 Jun, 2025 12.00 Lacs

Raipur - Chhattisgarh

Tender For material supply in arang section no.-1, arang section no.-2 & kharora section, under sub division no.-4 (arang) raipur - petty bazar supply in arang section no.- 02 & kharora srction under sub div. no.4 (arang) raipur (c.g.) t.m.brick , "supply of mineral aggregate like broken stone/crushed stone (crushed in mechanical crusher) as per clause 520 at road site including all lead and stacking etc. complete." , 22.4 mm standard size crushed stone , 13.2 mm standard size crushed stone , 11.2 mm standard size crushed stone , 6.7 mm standard size crushed stone , "supply of fine aggregate and filler material as per clause 520 including all lead and stacking etc. complete" , crusher stone dust , moorum

State Government

CTN :40465466

16 Jun, 2025 60.00 Lacs

Morbi - Gujarat

Tender For annual unit rate contract for supplying of construction material at maliya (mi) block of morbi district for mgnrega act - tiles - 600 x 600 x 16 mm, tiles - 600 x 600 x 20 mm, tiles - 600 x 600 x 15 mm, tiles - 600 x 600 x 0.5 mm gi metal, tiles - 600 x 600 x 0.5 mm gi metal with 20 perforation area with 1.8 mm dia holes and having nrc (noise reduction coe cient) of 0.5, hysd bar, brick bats chhara, brick aggregate 40mm size, c.i. greating 100 mm x 100 mm, c.i. nahni trap, cement, cement bags (empty), ceramic tiles, chicken wire mesh 16 x24, coarse sand, common burnt clay bricks conventional size, common burnt clay bricks modular size 20x10x10 cm, crushed stone aggregate for hard quality 10 to 20mm size, crushed stone aggregate for hard quality 10mm size, crushed stone aggregate for hard quality 20mm size, crushed stone aggregate for hard quality 40mm size, crushed stone aggregate for hard quality 40mm to 63mm size, crushed stone aggregate for hard quality 6 to 10mm size, crushed stone aggregate for hard quality 6mm size, diesel, distemper primer, dry distemper, fine sand, flat back wash basin white vitrious china 450mm x 300mm size, flushing cistern white vitrious with c.p. brass handle etc. 12.5 litre low level, fly ash brick, fuel steam coal, granite slab (18 mm thick) 1 side polished, m.s. plate / flat, mild steel bars, murrum/ binding material, polished kota stone slab green. 25 mm thick, pre-cast cement concrete tiles, putty as per isi specification for fixing glass on steel windows., quarry spall., r.c.c heavy duty non-pressure pipe i.s. class np2 300mm dia., r.c.c heavy duty non-pressure pipe i.s. class np2 450mm dia., r.c.c heavy duty non-pressure pipe i.s. class np2 900mm dia., r.c.c heavy duty non-pressure pipe i.s. class np2 600mm dia., rolling shutter rolling shutter of g.i. sheet any size grill, rubble, stone dust, t.m.t. bars fe- 415, vitryfied granite tiles 8 mm to 10 m thick 24 x 24 size dark shade, vitryfied granite tiles 8 mm to 10 m thick 36 x 36 size

State Government

CTN :40476182

31 May, 2025 NA

Chapara - Bihar

Tender For procurement of materials used in the schemes implemented under mnrega. - brick aggregate (single size):40 mm nominal size, stone aggregate(single size) : 40 mm nominal size, stone aggregate(single size) :20 mm nominal size, stone aggregate(single size): 10 mm nominal size brick bats, portland cement, white cement, block board construction flush door, with commercial ply on both faces, unslaked lime, satna lime, moorum, dry distemper, oil bound washable distemper/ acrylic, distemper, cement primer, distemper primer, pink primer (for wood), white cement based putty, black japan, enamel paint, roofing paint for iron sheets in red, colour, water proofing cement paint, plaster or paris, coarse sand (sone sand), fine sand, average rate of mild steel round bars, structural steel such as tees, angles,, channels and r.s. joists, flats up to 10 mm in thickness, steel glazed door, window/ ventilator,, all members viz, f7d, f4b, kll and, k12b etc., mild steel sheets for tanks, mild steel hooks, mild steel rivets, hard drawn steel wire fabric, galvanised steel bolts & nuts 6 mm dia, and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, galvanished steel bolts & nuts 10 mm, dia and 125 mm long round head with, slots, galva nished steel barbed wire, iron pintels including weldded pin, g.i lim pet washer 100, bitumen washer 100, 20 mm dia holding down bolts, mild st eel sheets with bolts and nuts to, rest on pintels, 18 mm t hick flamed finish granite stone, slab, g./. pipes 40 mm dia, r.cc pipes np2 class 300 mm dia, r.cc pipes np2 class 500 mm dia, r.cc pipes np2 class 600 mm dia, r.cc pipes np2 class 900 mm dia, r.cc collars np2 class 500 mm dia, r.cc collars np2 class 600 mm dia, r.cc coll~ np2 class 900 mm dia, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, vitreous china flat back wash basin, 630x450 mm, vitreous china india type w.e. pan size, 580mm, vitreous china orrisa type w.e. pan size, 580mm, common burnt clay f.p.s. (non, modular) bricks class designation 7.5, common burnt clay f.p.s. (non, modular) bricks class designation 5.00, over burnt (jhama) brick aggregate:, 120 mm to 40 mm size, over burnt (jhama) brick aggregate: 90, mm to 40 mm siize, red oxide zinc chromate primer, coloured inter locking c.c. paver block, sand zone v (jamuna)/local sand, f.p.s. (non modular) clay fly ash bricks, class designation 7.5, 400 g polythene sheet, white marble raj nagar plain 18 mm, thick upto on ~o sqm area, , upvc pipes (working pressure 4 kg /, cm2 ) single socketed pipe 110 mm dia, upvcbend 87.50, 110 mm bend, plain ce iling tiles (bwp type phenol, formaldehyde synthetic resin bonded), 600x600x12 mm), semi perforated ceiling tiles, (600x600x12 mm), binding wire, boulder 50 mm to 200 mm, coloured inter locking c.c. paver block, acrylic exterior paint, metal primer (u.g.), vitrified floor tile 50x50 cm, vitrified floor tile 60x60 cm, vitrifies floor tile 80x80 cm, vitrified floor tile looxl00 cm, border tiles 2c\ox75 mm size, interlocking c.c. paver block (60 mm, thick, m30), high polymer modified quickset tile, adhesive, interlocking c.c. paver block (80 mm, thick, m-30), 80 mm thick m 40 cc paver block, 80 mm thick m 40 cc paver block, (white color), ready mix paint for steel work, ready mixpaint for wood work, tmtc 500 8 mm, tmtc 500 10 mm, tmtc 500 12 mm, tmt fe 500 16 mm, tmt fe 500 20 mm, steel doors and windows ready made, steel door with necessary hinges lugs, and glazing clips excluding other clips, excluding other fittings and their fixing, mild steel wire road 6 mm, steel channel, galvanised stet l corrugated sheets 0.63, mm th'ck l", galvanised steel corrugated sheets 0.50, mm thick, galvanised steel corrugated sheets 0.40, mm thick, galvanised steel corrugated sheets 0.35, mm thick, galvanised steel corrugated sheets 0.80 mm thick

CTN :39886072

09 Jun, 2025 NA

Pune - Maharashtra

Tender For corrigendum : supply of fine aggregate (v2) conforming to is 383 (q3)

CTN :40363438

28 May, 2025 NA

Bardhaman - West Bengal

Tender For corrigendum : supply of stone dust - fine aggregates stone dust , supply and delivery of coarse sand , aggregates 10 mm , aggregates 20 mm , granular sub base -gsb

CTN :40363471

30 May, 2025 NA

Bardhaman - West Bengal

Tender For corrigendum : supply of granular sub base - gsb , stone aggregate 90-45mm , aggregates 63 - 40 mm , fine aggregates stone dust , aggregates 20 mm

CTN :40447681

30 May, 2025 4.72 Lacs

Multi City - Karnataka

Tender For supply of materials and machinery for construction of hitech toilet at government high school tavanshi villege of athani taluka - atn-1 granite/trap broken metal 100 mm and down size, atn2 coarse sand (zone iii), atn3 broken stone aggregate 40 mm size, atn4 broken stone aggregate 20 mm size, atn5 broken stone aggregate 12 mm to 10 mm size, atn6 portland cement, atn7 mixer (concrete) - 1 cum capacity, atn13 rubble stones, atn14 bond stone 20 x 20 x 45 cm, atn15 mixer (concrete small used in culvert), atn22 burnt bricks class 35 (non modular), atn10 tmt bars fe 500, atn11 binding wire, atn28 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for roof slab, atn24 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for columns, atn34 providing and fixing special make glazed vitrified tiles (granomite finish) of approvedmake, quality and colour of size 600x600x10mm thick fixed on existing flooring with a special adhesivefor flooring and skirting and jointed with neat cement slurry mixed with pigment to match the shade oftiles., including providing spacers at required interval and removing stains etc.,cost ofmaterials,mortar,labour etc., complete as per specifications., atn31 providing and fixing m.s.grill work for windows and ventilators weighing 21kg/sqm usingm.s. flats, or m.s. square rods, or combination of m.s. flats and square rods as per approved design,drawing including cutting steel sections and welding the same to required pattern with a coat of red leadprimer, cost of materials, fixtures, labour and hom of machinery complete as per specifications, atn36 providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on10mm thick cement plaster, atn38 providing and applying painting in two coats with plastic emulsion paint ofapproved brand on wall surface to give an even approved shade after throughly brushing the surface,free from mortar drops and other foreign matter including preparing the surface even and sand papersmooth, cost of materials, labour, complete as per specifications., atn39 providing and finishing external walls in two coats with waterproof cement paint ofapproved brand and shade to give an even shade after throughly brooming the surface to remove all dirtand loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications., atn40 providing and fixing white vitreous china clay, water closet orissa pattern of size 580 x440mm with integral type footrests, 100mm s or p trap, 10 litre low level, p.v.c flushing cistern ( all areapproved make ) with fittings, c.i / m.s brackets, 32mm diameter flush pipe fittings and clamps, overflowarrangements with special and 25mm mosquito proof coupling of approved design, painting of fittingsand brackets, cutting and making good the wall and floor wherever including cost of material, atn41 providing and fixing white vitreous china clay, flat back wash basin size 550x400mmwith a pair of 15mm c.p brass pillar taps with c.i / m.s brackets, 32 mm c.p. brass waste of standardpattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required,including cost of materials, labour complete as per specifications., atn42 providing and fixing white vitreous china clay, wall corner type, lipped front urinal basinof size 340x410x265mm with 5 litres p.v.c automatic flushing cistern, c.i / m.s brackets, standard flushpipe and c.p. brass spreaders with brass unions and g.i. clamps complete painting of fittings andbrackets, cutting and making good the wall and floor wherever required, including cost of materials,labour complete as per specifications., atn44 providing and installing at site of work p.v.c. pipes including cost of pipes andspecials and labour, including lowering into trenches, laying true to line, level and perfect linking at jointsleak proof including jointing of approved t

Fine Aggregate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government