Latest fine sand Tenders | Government fine sand Tenders

State Government

CTN :45543821

04 Jul, 2026 NA

Aizawl - Mizoram

Tender For supply of hessain cloth , sand bag , target paper figure 11 , target paper figure 12 , target tin figure 11 , target tin figure 12 , white board marker , duster , nails , paint white , paint green , paint red , paint black , mizoram map

Central Government/Public Sector

CTN :45570160

24 Jun, 2026 4.36 Lacs

Udhampur - Jammu And Kashmir

Tender For design and consultancy services for water treatment plant (rapid sand filter) 10000 gph capacity at stc bsf udhampur

State Government

CTN :45574744

24 Jun, 2026 7.36 Lacs

Delhi - Delhi

Tender For supply and stacking of good earth, jamuna sand, tuflex, hydrolic excavator and renovation etc. at site

Central Government/Public Sector

CTN :45555566

22 Jun, 2026 NA

Saharanpur - Uttar Pradesh

Tender For supply of sand box for handling (movable) as per attached drg. no. els/sre/02/2025-26(revised). [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45562938

22 Jun, 2026 NA

Ranchi - Jharkhand

Tender For stone boulder of size 150 mm and below at source quarry supply of quarried stone 150-200 mm size for hand broken at source quarry boulder with minimum size of 300 mm for pitching at source quarry coarse sand i) at source coarse sand ii) at source fine sand at source quarry moorum at source quarry gravel/quarry spall at source quarry granular material or hard murum for gsb works at source quarry fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant filter media/filter material as per table 300-3 (mort&h specification) at crusher. close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher. close graded granular sub-base material 37.5 mm to 9.5 mm at crusher. close graded granular sub-base material 26.5 mm to 9.5 mm at crusher. close graded granular sub-base material 9.5 mm to 4.75 mm at crusher. close graded granular sub-base material 9.5 mm to 2.36mm at crusher. close graded granular sub-base material 4.75mm to 2.36mm at crusher. close graded granular sub-base material 4.75mm to 75 micron at crusher. close graded granular sub-base material 2.36 mm & below at crusher. stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher. coarse graded granular sub-base material 2.36 mm & below at crusher. coarse graded granular sub-base material 4.75 mm to 75 micron at crusher. coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher. coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher. coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher. coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher. coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher. coarse graded granular sub-base material 53 mm to 26.5 mm at crusher. aggregates below 5.6 mm at crusher. aggregates 22.4 mm to 2.36 mm at crusher. aggregates 22.4 mm to 5.6 mm at crusher. aggregates 45 mm to 2.8 mm at crusher. aggregates 45 mm to 22.4 mm at crusher. aggregates 53 mm to 2.8 mm at crusher. aggregates 53 mm to 22.4 mm(grade iii) at crusher. aggregates 63 mm to 2.8 mm at crusher. aggregates 63 mm to 45 mm (grade ii)at crusher. aggregates 90 mm to 45mm(grade i) at crusher. aggregates 10 mm to 5 mm at crusher. aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher. aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher. aggregates 13.2 mm to 5.6 mm at crusher. aggregates 13.2 mm to 10 mm at crusher. aggregates 20 mm to 10 mm at crusher. aggregates 25 mm to10 mm at crusher. aggregates 19 mm to 6 mm at crusher. aggregates 37.5 mm to 19 mm at crusher. aggregates 37.5 mm to 25 mm at crusher. aggregates 6 mm nominal size at crusher. aggregates 10 mm nominal size at crusher plant. aggregates 13.2/12.5 mm nominal size at crusher plant. aggregates 20 mm nominal size at crusher plant. aggregates 25 mm nominal size at crusher. aggregates 40 mm nominal size at crusher. crushing of stone aggregates (gsb crusher run) ac pipe 100 mm dia acrylic polymer bonding coat alluminium paint aluminium alloy plate 2mm thick aluminium alloy/galvanised steel aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm barbed wire bearing (cost of parts) bearing (cast steel rocker bearing assembly of 250 tonne ) road studs 100x100mm fitted with lense reflectors vide clause cl 804.2 of morth (5th revision) bearing (elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal reinforcing steel laminates by the process of vulcanisation) taking elastomeric bearing of size 500 x 400 x 96mm, overall volume=19200 cubic cm bearing (forged steel roller bearing of 250 tonne) bearing (pot type bearing assembly consisting of a metal piston supported by a disc, pt

State Government

CTN :45558196

22 Jun, 2026 NA

Medininagar - Jharkhand

Tender For supply of list of approved construction materials for the preparation of schedule of rates for the year 2026, basic rates of which to be approved by the state level schedule rate committee (materials should conform to relevant b.i.s., mord and mort&h specifications). the rates will be inclusive of royalty but exclusive of all taxes, g.s.t,overhead and contractor's profit. "rates are at source"quarry/ crusher plant. - stone boulder of size 150 mm and below at source quarry, supply of quarried stone 150-200 mm size for hand broken at source quarry, boulder with minimum size of 300 mm for pitching at source quarry, coarse sand i) at source, coarse sand ii) at source , fine sand at source quarry, moorum at source quarry, gravel/quarry spall at source quarry, granular material or hard murum for gsb works at source quarry, fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant, filter media/filter material as per table 300-3 (mort&h specification) at crusher., close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher., close graded granular sub-base material 37.5 mm to 9.5 mm at crusher. , close graded granular sub-base material 26.5 mm to 9.5 mm at crusher., close graded granular sub-base material 9.5 mm to 4.75 mm at crusher., close graded granular sub-base material 9.5 mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 75 micron at crusher., close graded granular sub-base material 2.36 mm & below at crusher., stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher., coarse graded granular sub-base material 2.36 mm & below at crusher., coarse graded granular sub-base material 4.75 mm to 75 micron at crusher., coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher., coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 53 mm to 26.5 mm at crusher., aggregates below 5.6 mm at crusher., aggregates 22.4 mm to 2.36 mm at crusher., aggregates 22.4 mm to 5.6 mm at crusher., aggregates 45 mm to 2.8 mm at crusher., aggregates 45 mm to 22.4 mm at crusher., aggregates 53 mm to 2.8 mm at crusher., aggregates 53 mm to 22.4 mm(grade iii) at crusher., aggregates 63 mm to 2.8 mm at crusher., aggregates 63 mm to 45 mm (grade ii)at crusher., aggregates 90 mm to 45mm(grade i) at crusher., aggregates 10 mm to 5 mm at crusher., aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher., aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher., aggregates 13.2 mm to 5.6 mm at crusher., aggregates 13.2 mm to 10 mm at crusher., aggregates 20 mm to 10 mm at crusher., aggregates 25 mm to10 mm at crusher., aggregates 19 mm to 6 mm at crusher., aggregates 37.5 mm to 19 mm at crusher., aggregates 37.5 mm to 25 mm at crusher., aggregates 6 mm nominal size at crusher., aggregates 10 mm nominal size at crusher plant., aggregates 13.2/12.5 mm nominal size at crusher plant., aggregates 20 mm nominal size at crusher plant., aggregates 25 mm nominal size at crusher., aggregates 40 mm nominal size at crusher., crushing of stone aggregates (gsb crusher run), ac pipe 100 mm dia, acrylic polymer bonding coat, alluminium paint, aluminium alloy plate 2mm thick, aluminium alloy/galvanised steel , aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv, road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm, barbed wire, bearing (cost of parts), bearing (cast steel rocker bearing assembly of 250 to

State Government

CTN :45562939

22 Jun, 2026 NA

Hazaribag - Jharkhand

Tender For list of approved construction materials for the preparation of schedule of rates for the year 2026, basic rates of which to be approved by the state level schedule rate committee (materials should conform to relevant b.i.s., mord and mort&h specifications). the rates will be inclusive of royalty but exclusive of all taxes, g.s.t,overhead and contractors profit. "rates are at source"quarry/ crusher plant. - stone boulder of size 150 mm and below at source quarry, supply of quarried stone 150-200 mm size for hand broken at source quarry, boulder with minimum size of 300 mm for pitching at source quarry, coarse sand i) at source, coarse sand ii) at source, fine sand at source quarry, moorum at source quarry, gravel/quarry spall at source quarry, granular material or hard murum for gsb works at source quarry, fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant, filter media/filter material as per table 300-3 (mort&h specification) at crusher., close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher., close graded granular sub-base material 37.5 mm to 9.5 mm at crusher., close graded granular sub-base material 26.5 mm to 9.5 mm at crusher., close graded granular sub-base material 9.5 mm to 4.75 mm at crusher., close graded granular sub-base material 9.5 mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 75 micron at crusher., close graded granular sub-base material 2.36 mm & below at crusher., stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher., coarse graded granular sub-base material 2.36 mm & below at crusher., coarse graded granular sub-base material 4.75 mm to 75 micron at crusher., coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher., coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 53 mm to 26.5 mm at crusher., aggregates below 5.6 mm at crusher., aggregates 22.4 mm to 2.36 mm at crusher., aggregates 22.4 mm to 5.6 mm at crusher., aggregates 45 mm to 2.8 mm at crusher., aggregates 45 mm to 22.4 mm at crusher., aggregates 53 mm to 2.8 mm at crusher., aggregates 53 mm to 22.4 mm(grade iii) at crusher., aggregates 63 mm to 2.8 mm at crusher., aggregates 63 mm to 45 mm (grade ii)at crusher., aggregates 90 mm to 45mm(grade i) at crusher., aggregates 10 mm to 5 mm at crusher., aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher., aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher., aggregates 13.2 mm to 5.6 mm at crusher., aggregates 13.2 mm to 10 mm at crusher., aggregates 20 mm to 10 mm at crusher., aggregates 25 mm to10 mm at crusher., aggregates 19 mm to 6 mm at crusher., aggregates 37.5 mm to 19 mm at crusher., aggregates 37.5 mm to 25 mm at crusher., aggregates 6 mm nominal size at crusher., aggregates 10 mm nominal size at crusher plant., aggregates 13.2/12.5 mm nominal size at crusher plant., aggregates 20 mm nominal size at crusher plant., aggregates 25 mm nominal size at crusher., aggregates 40 mm nominal size at crusher., crushing of stone aggregates (gsb crusher run), ac pipe 100 mm dia, acrylic polymer bonding coat, alluminium paint, aluminium alloy plate 2mm thick, aluminium alloy/galvanised steel, aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv, road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm, barbed wire, bearing (cost of parts), bearing (cast steel rocker bearing assembly of 250 tonne ), road st

State Government

CTN :45558189

22 Jun, 2026 NA

Chaibasa - Jharkhand

Tender For the quotation is invited to ascertain and assess the rate of materials as per with lowest market rate for framing of schedule of rate. - stone boulder of size 150 mm and below at source quarry, supply of quarried stone 150-200 mm size for hand broken at source quarry, boulder with minimum size of 300 mm for pitching at source quarry, coarse sand i) at source, coarse sand ii) at source, fine sand at source quarry, moorum at source quarry, gravel/quarry spall at source quarry, granular material or hard murum for gsb works at source quarry, fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant, filter media/filter material as per table 300-3 (mort&h specification) at crusher., close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher., close graded granular sub-base material 37.5 mm to 9.5 mm at crusher., close graded granular sub-base material 26.5 mm to 9.5 mm at crusher., close graded granular sub-base material 9.5 mm to 4.75 mm at crusher., close graded granular sub-base material 9.5 mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 75 micron at crusher., close graded granular sub-base material 2.36 mm & below at crusher., stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher., coarse graded granular sub-base material 2.36 mm & below at crusher., coarse graded granular sub-base material 4.75 mm to 75 micron at crusher., coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher., coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 53 mm to 26.5 mm at crusher., aggregates below 5.6 mm at crusher., aggregates 22.4 mm to 2.36 mm at crusher., aggregates 22.4 mm to 5.6 mm at crusher., aggregates 45 mm to 2.8 mm at crusher., aggregates 45 mm to 22.4 mm at crusher., aggregates 53 mm to 2.8 mm at crusher., aggregates 53 mm to 22.4 mm(grade iii) at crusher., aggregates 63 mm to 2.8 mm at crusher., aggregates 63 mm to 45 mm (grade ii)at crusher., aggregates 90 mm to 45mm(grade i) at crusher., aggregates 10 mm to 5 mm at crusher., aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher., aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher., aggregates 13.2 mm to 5.6 mm at crusher., aggregates 13.2 mm to 10 mm at crusher., aggregates 20 mm to 10 mm at crusher., aggregates 25 mm to10 mm at crusher., aggregates 19 mm to 6 mm at crusher., aggregates 37.5 mm to 19 mm at crusher., aggregates 37.5 mm to 25 mm at crusher., aggregates 6 mm nominal size at crusher., aggregates 10 mm nominal size at crusher plant., aggregates 13.2/12.5 mm nominal size at crusher plant., aggregates 20 mm nominal size at crusher plant., aggregates 25 mm nominal size at crusher., aggregates 40 mm nominal size at crusher., crushing of stone aggregates (gsb crusher run), ac pipe 100 mm dia, acrylic polymer bonding coat, alluminium paint, aluminium alloy plate 2mm thick, aluminium alloy/galvanised steel, aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv, road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm, barbed wire, bearing (cost of parts), bearing (cast steel rocker bearing assembly of 250 tonne ), road studs 100x100mm fitted with lense reflectors vide clause cl 804.2 of morth (5th revision), bearing (elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal reinforcing steel laminates by the process of vulcanisation), taking elastomeri

State Government

CTN :45460031

30 Jun, 2026 2.54 Lacs

Kozhikode - Kerala

Tender For corrigendum : water quality mitigation to 2024-25 - pressure sand filter of dual media filter-thushara kavugullakunnwss in puthuppadi gramapanchayth kozhikode district

State Government

CTN :45446886

30 Jun, 2026 5.50 Lacs

Kannur - Kerala

Tender For corrigendum : water quality mitigation to wss - 2023-24 pressure sand filter refilling in padannotte wss in munderi gp and pressure sand filter /irp of dual media filter at moilothara wss in maruthomkara gp kannur and kozhikode district

Fine Sand Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors