Tender For supplying and providing material- supplying and providing electric material, supplying and erecting modulartype switch6a/10a, supplying and erecting street light bracket for erection of single fitting made from 40 mm. dia 'b' class g.i.pipe 1.0 m in length, 36 watt led light sensor, 50 watt led light sensor, 36 watt led light without sensor, 50 watt led light without sensor, light bracket, pvc tapes, electric service wire , 5a switch, mcb box, 32 amp switch, armoured cable, 16 amp fuse, 32 amp fuse, pipe clamp, fitting and labour charge, providing cement concrete foundation including excavation for the poles 60 cm x 60 cm x 1.5 m deep in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm/45 cm dia. x 45 cm height plinth duly plastered and with necessary curing and finishing in an approved manner.(for 8.5 to 9 m poles) (16-3-2), supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5 x 3.65 x 3.25 mm thickness (4.5 + 1.75 + 1.75m) length respectively and total 8 m long with pole cap, base plate in provided foundation.(weight 101 kg.) as per specification no.oh-pl/stp, supplying and erecting street light bracket made from 25mm.dia 'b' class g.i. pipe 0.6m.in, supplying and erecting led street light fitting suitable for 36w to 40w led street light, including lamp,with pf > 0.95 class ip 65, supplying and erecting led street light fitting suitable for 50w lamp, including lamp, with pf > 0.95 class ip 65, supplying and erecting led street light fitting suitable for 60w lamp, including lamp, with pf > 0.95 class ip 65., supplying and erecting led street light fitting suitable for 90w led street light, including lamp, with pf > 0.95 class ip 65., supplying and erecting led flood light fitting of 120w, including lamp, with pf > 0.95 class ip 65, supplying and erecting led flood light fitting of 150w, including lamp, with pf > 0.95 class ip 65, providing rental basis hydraulic bucket vehicle of hight 13 mtr. and weight capacity 200 kg with driver, oprator and disel etc.for day basis, labour charges for led fitting on street light or ms light pole., dismentaling charges led street light of pole, 1.25 mm crca sheet metal enclosures box for timmer and mcb, supplying pvc insulated pvc round sheathed 1.5 sq.mm, supplying and laying armoured cable 4c x 6 sq.mm, supplying and laying armoured cable 4c x 10 sq.mm, supplying and laying armoured cable 2c x 10sq.mm, supplying and laying armoured cable 4c x 16 sq.mm, supplying erecting & marking spmcb 6a to 32a,b-series (for lighting) 5-3-3, supplying erecting & marking dpmcb 6a to 32a, bseries (for lighting) 5-3-7, supplying and erecting programmable digital almanac timer microcontroller based with real time clock to operate on derived switching "on" & switching "off" street light as per daily sunset and sunrise respectively, supplying & erecting crimping type aluminium lugs for cable upto 16 sq mm complete, supplying & erecting crimping type coper lugs for cable upto 1.5 to 6 sq mm complete, supplying and erecting two pole power contactor 250v 32a for time switch complete erected on wooden block/provided box, with necessary materials.4-4-3, supplying & erecting mains with 2x1.5 sq mm f.r copper pvc insulated wire laid in provided conduit/trunking/inside pole, supplying & erecting mains with isi mark wp2 x 6sq mm 1100 v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire no 8 swg 1-4-3, supplying & erecting mains with isi mark wp2 x 2.5 sq mm 1100v grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire, supplying & erecting mains with isi mark wp2 x 10.00 sq mm 1100v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire, 25 amp, 32 amp three phase l/t contactor, 2.5 sq mm multistand copper wire, insulation tape, water proof tape, street light pole box frp, cement street light pole clamp, m.s. street light pole clamp, led street light arm bend pipe, small size frp
Tender For supply of decentralized material and installation of 11kv isolator under edd pauri under head of capital for fy 2026-27. - material, 11 kv vertical type isolator, labour, fabrication of steel, inst. of danger board/number plate, erection 11kv off-load isolator for fdr, fixing of aluminium lugs
Tender For supply of decentralized material and installation of 33kv isolator under edd pauri under head of capital for 2026-27 - material, 33 kv isolator vertical type, labour, fabrication of steel, inst. of danger board/number plate, installation / fixing of 33 kv isolator, fixing of aluminium lugs
Tender For corrigendum : repair to security lights panels dg sets fire alarm ups with covered items at af stn bikaner under ge (af) nal - excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5m depth, getting out the excavated earth, forming bottom surfaces to required gradient complete all as specified and directed by engineer-in-charge., removal of excavated material soils to a distance n exc 50 m and depositing where directed at a level not exceeding 1.5m above the startly point complete all as specified and directed., returning filling in, including spreading, levelling watering and well ramming in layers n exc 25 cm as in any type of soil complete all as specified and directed., material and labour for sand cushioning using dry and clean tibba sand in two layers, first layers of 80mm thick before laying of cable and second layer of 150mm thick after laying of cable in trenches/ducts including consolidation of each layers complete all as specified and directed. note : punned thickness shall be measured for payment., material and labour for un-reinforced pre-cast concrete cable covers, class lv type-1, flat size 250mm x 150mm x 40mm thick complete all as specified and directed., taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 2 core, 6 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 2 core, 10 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 4 core, 16 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 3.5 core, 25 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 3.5 core, 35 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 3.5 core, 50 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, supplying, laying, jointing and testing of under ground cable xlpe insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 2 core 6 sqmm laid in trenches/duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by engineer-in-charge , supplying, laying, jointing and testing of under ground cable xlpe insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 2 core 10 sqmm laid in trenches/duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by engineer-in-charge, supplying, laying, jointing and testing of under ground cable xlpe insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 4 core 16 sqmmlaid in trenches/duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by engineer-in-charge, supplying, laying, jointing and testing of under ground cable xlpe insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 3.5 core 25 sqmm laid in trenches
Tender For corrigendum : providing of custom bid for services - addition & alteration construction of bio-chemistry lab at second floor. - dismantaling and disposal work; (a) first floor roof existing fibre sheet removal and disposal (16x5)feet , (b)second floor(bio chemistry) existing brick wall 9" th. dismantling and disposal , ( c) existing window removal (6x4'-6") , (d) existing floor dismantling and disposal , " 6.4.1 brick work with common burnt clay f.p.s (non modular) bricks of class designetion 7.5 in superstructure above plint level in all shapes and sizes in cement mortar1:6(1cement 6 coarse sand) " , plaster inside 12mm with 1: 6 ratio with fine sand , external plaster 15mm 1 :4 ratio 18mm cement plaster in two coats under layer 12 mm thick cement plaster1:5 ( 1cement :5 coarse sand ) and a top layer 6mm thick plaster , providing and laying reinforcement work , providing and laying rienforce cement concrete in retaining walls including attatched pilasters, colmns,piers,abutments pillars,posts,struts,buttresses,string,or lacing courses,parapets,coping,bed blocks,anchor blocks window sills ,fillllets,sunken floor etc.up to floor five level ,excluding the cost of centering ,shuttering ,reinforcement and finishing (5.2.2) , floor and roof protection work ;(4.20a.2.2) concrete of m15grade with minimum cement content 240kg/cum , 11.49.2 floor tiles; providing and laying full body vitrifiedtile in floor of minimum thickness 15mm with water absorption less than 0.06% and confirming to is:15622,of approved make, brand and manufacturer.laid on 20 mm thick cement mortar 1:4 . including grouting the joints with white cement /matching grout size600x600 , skirting , structural steel work welded in built up sections /framed work including cutting ,hoisting ,fixing in position and applying a priming coat of approved steel primer using structural steel .(250x125) , "red stone for slab providing sand stone slab for roofing and laying them in cement mortar1:4 ( 1 cement : 4 coarse sand ) over wooden karris or rcc battens or structural steel section (karries or battens or or structural steel. " , providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: , counter slab stone work , 8.2.2 . providing and fixing 18mm thick gang saw cut mirror polished, premoulded and prepolished,machine cut for kitchen platforms ,vanity counters,window sills ,facias and similar locations of required size approved shade ,colour and texture laid over20 mmthick base cement mortar, joint treated with white cement mixed matching pigment,including rubbing curing ,moulding and polishing of edges excluding hosting and transportation , counterslab stone skirting , providing edge moulding to 18 mm thick marble/granite stone counter,vanities etc. , p\ fteak wood frame ,providing wood work in frames of doors windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasterners of requireddia and length( hold fastlugs or dash fastenershall be paid for separetely. , p\f flush door , providing and fixing is markedflush door shutters confirming to is ;22029 part 1) non decorative type core of construction with frame of first class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (9.21.1) 35 mm thick including isi markedsteel but hinges with necessary screws , fixing of aluminium window with all necessary at site available at site , providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : , finishing walls with acrylic sm
Tender For corrigendum : tender for supply of electrical fitting and fixures - upvc 4 way junction box 1 inch thickness is to 2 mm make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro or indoasian elvira , 185 sq mm straight aluminium lugs heavy duty lugs or any reputed brand , 300 sq mm straight aluminium lugs heavy duty lugs or any reputed brand , 70 sq mm tubular terminal copper lugs heavy duty lugs or any reputed brand , single phase preventor 415 vac make easun or ge or abb or schneider or siemens or cg , 300 mm ms cable tray 14 swg powder coated performated type of any reputed brand size 300mm x 50 mm standard size 2 point 5 mm or more make maa industries mumbai or profab of indiana or essar or protec or akg or pai fab or classic engineering solutions or fixotech engineering systems or innospacer engineer technologies , 100 x 100 x 65 mm pvc box make heavy duty lugs or any reputed brand , mccb 630 amps 50 ka make schneider or abb or siemens or hager or legrand or l and t or indoasian or optipro , mccb 400 amps 50 ka make schneider or abb or siemens or hager or legrand l and t or indoasian or optipro , mccb 250 amps 50 ka make schneider or abb or siemens or hager or legrand or l and t or indoasian or optipro , mccb 125 amps 50 ka make schneider or abb or siemens or hager or legrand or l and t or indoasian or optipro , on load 4 pole change over 63 a make schneider or abb or siemens or hager or legrand or l and t or indoasian or optipro , on load change over 250 a switch , 300 sq mm gland 63 mm heavy duty lugs or any reputed brand , 185 sq mm gland 50 mm heavy duty lugs or any reputed brand , a c box with 20 amps socket socket with sheet steel enclosure plug and mcb make schneider or abb or siemens or hager or legrand or l and t or indoasian or optipro , 10a switch modular make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 16a switch modular make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 6a modular socket make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 16a socket modular make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , fan regulator socket type 400w modular make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 2 modular pvc box with plate make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 3 modular box make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 4 modular pvc box with plate make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 6 modular box make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 8 modular box make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 12 modular box make legrand or anchor or abb or mk or schneider or siemens or l and t or l k or kolors or wipro , 2 pole mcb c 10 a schneider or abb or siemens or hager or legrand or l and t or indoasian optipro , 2 pole mcb c 40 a schneider or abb or siemens or hager or legrand or l and t indoasian optipro