Latest fire door Tenders | Government fire door Tenders

State Government

CTN :45678444

01 Jul, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate of material items for implementation of mgnrega schemes under rampurhat ll development block - technician, helper (technician), coolie, carriage of tar bitumen, carriage of stone aggregate below 40 mm nominal size, carriage of steam coal, carriage of stone aggregate 40 mm nominal size and above, 1st class picked jhama bricks(traditional), carriage of soling stone & masonry stone, coloured inter locking c.c. paver block, fine sand, silver sand, 1st class traditional bricks (kiln burnt), coarse sand, fly ash bricks(traditional), modular fly ash bricks, modular clay bricks, stone aggregate(single size): 40 mm nominal size, medium sand, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, surface vibrator, water tanker 5000 ltr. capacity, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, carriage of r.c.c. pipes 900 mm dia, carriage of r.c.c. pipes 1000 mm dia, carriage of r.c.c. pipes 1200 mm dia, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), welding by electric plant, brick aggregate (single size):40 mm nominal size, moorum, carriage of carriage of moorum, stone aggregate(single size):63 mm nominal size, river bed material, fitter(grade1), brick aggregate (single size):50 mm nominal size, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), nylon net, paddy straw, g i wire, stone boulder ( 225mm-150mm ), stone boulder( 225 mm above ), laterite boulder, carriage of cost of neelgiri/maxican grass truf sqm, wood dust, sal silliguri, sal malaysia, neem wood, other local wood, ordinary teak wood, sisu/gamar wood, local sal wood, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), bright finished or black enamelled mild steel screws 40 mm, bright finished or black enamelled mild steel screws 20 mm, bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm, bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm, bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm, hydraulic door closer tubular type aluminium section body, brass 150 mm floor door stopper (0.357 kg), anodised aluminium hanging type door stopper, malayasia sal cleat, chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, frp composite door frame 66mm x 90mm, frp composite door frame 66mm x 70mm, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, supplying solid flush type doors of commercial quality, white cement, coal tar, carriage of steel, r.c.c ventilator of 20 mm. thick upto 0.10 sq.m. area, r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area, fan hook, chlorinated polyvinyl - chloride (cpvc) pipe 15 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 20 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 32 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 40 mm outer dia,

Central Government/Public Sector

CTN :45666219

14 Jul, 2026 19.92 Lacs

Umiam - Meghalaya

Tender For supply of cylinder side casting frame , main gear , pinion gear casting , pedal spacer guide casting , bottom pedal casting , cylinder side bearing house casting , cross casting , connecting rod bearing housing casting , ms casting for fixing the blades , m.s. flat 20 x 3 mm , m.s. flat 30 x 6 mm , m.s. flat 50 x 5 mm , saw blade 2 and half inch size , m.s sheet 4x8 sq.feet 16 gauge , m.s sheet 4x8 sq. feet 18 gauge , m.s sheet 4x8 sq.feet 14 gauge , stainless steel sheet 304 grade 4x8 feet 1.2 mm thickness , ms equal angle 40 x 40 x 5 mm , ms equal angle 25 x 25 x 5 mm , ms equal angle 30 x 30 x 5 mm , ms equal angle 50 x 50 x 5 mm , ms rectangular pipe 3 inch x 1 inch , ms channel 20 mm , black conduit pipe 25 mm outer dia , ms square pipe 1 inch heavy , ms square pipe 2 inch heavy , ms square pipe 1 and one-fourth inch , ms square pipe half inch 15 feet length , plain pipe 25 mm outer diameter , ms rod 8 mm , ms rod 10 mm , ms rod 12 mm , ms square rod 10 mm , ms square rod 8 mm , ms cold roll bright bar 25 mm 20 feet length , ms cold roll bright bar 40 mm 20 feet length , gi nuts and bolts 9 mm diameter and 90 mm length , gi nuts and bolts 6 mm diameter and 45 mm length , gi nuts and bolts 8 mm diameter and 45 mm length , gi nuts and bolts 13 mm diameter and 127 mm length , gi nuts and bolts 10 mm diameter and 85 mm length , m s washer 10 mm inner diameter 25 mm outer diameter , m s washer 8 mm inner diameter 50 mm outer diameter , m s washer 19 mm inner diameter 50 mm outer diameter , m.s rivets 4 mm diameter x 5 mm length flat head , m.s rivets 5 mm diameter x 12 mm length round head , welding electrodes 2.50 mm size , welding electrodes 3.15 mm size , enamel paint mint green , thinner for paint , trolley wheel 8 inch size with 23 mm shaft size , ball bearings 6202 size , ball bearings 6200 size , cut off wheel size 355 x 2.8 x 25.4 mm , cutter grinder wheel 105 x 1.2 x 16 mm , flap disc 60 grit size 100 x 16 mm , grinding disc 105 x 1.2 x 16 mm , coal coke fuel , cotton jute , pillow block bearing p205 id 25 mm diameter , pillow block bearing f205 id 25 mm diameter , rubber dotted for plucker cleaning machine 10 x 2 x 3 cm lxwxh , cycle frame double bar ph type 22 inch size , crank and pedal for cycle 60 teeth with 210 mm diameter , cotter pin lock for crank and pedal 10 mm , 22 teeth sprocket freewheel rear flywheel 34 mm inner diameter , bicycle chain pitch 12.7mm, width 3.17 mm, 8 feet length , stainless steel allen counter sunk screw 6 x 25 mm , stainless steel allen counter sunk nuts 6 mm , stainless steel allen counter sunk washer 6 mm , high speed steel planer blades 90 x 39 x 3 mm , ms heavy duty hatch hinge free swing 37 mm l x 67.5 mm w x 2 mm t , ms hinge 3 inch , chrome finishes ms tower bolt 3 inch size for door , water soluble cutting oil metal working fluid, iso certified , machine oil ep 68 with iso certification , hydraulic oil 68 iso certified , ms taps bsw 1 by 8 inch, 5 by 32 inch, 3 by 16 inch, 1 by 4 inch, 5 by 16 inch, 3 by 8 inch , ms taps metric 9 mm and 10 mm , carbide end mill 8 mm and 10 mm , combination spanner set from 3 mm to 22 mm size , bicycle grip handle , combination plier 7 inch , flat nose plier 6 inch , carbon brush for 4 inch angle grinder //bid details 2 / 67

CTN :45649560

29 Jun, 2026 NA

South Tripura - Tripura

Tender For supply of all kinds of aluminium items for different construction work under rd satchand division during the year 2026-27 - providing & fitting fixing of anodized aluminium framed (24 series, 1.50mm thick ) upper part fixed & sliding shutter in 2 (two) track window as approved design of department with 4 mm thick plain or coloring glass etc and necessary accessories for suitable locking & handling arrangement for the complete job as per direction of engineer-in-charge., providing & fitting fixing of anodized aluminium framed (24 series,1.50 mm thick ) upper part fixed & sliding shutter in 3 (three) track window as approved design of department with 4 mm thick plain or coloring glass etc and necessary accessories for suitable locking & handling arrangement for the complete job as per direction of engineer-in-charge., providing & fitting fixing of anodized aluminium framed window upper part fixed & open able shutter in 2 (three) part (40 series, 1.50 mm thick ) with 4 mm thick plain or coloring glass etc and necessary accessories for the complete job as per direction of engineer-in-charge., providing & fitting fixing of anodized aluminium framed window upper part fixed & open able shutter in 3 (three) part (40 series, 1.50 mm thick ) with 4 mm thick plain or coloring glass etc and necessary accessories for the complete job as per direction of engineer-in-charge, providing & fitting fixing of fixed aluminium framed partition with 12 mm prelaminated particle board / 4mm plain or coloring glass incl. door etc and necessary accessories as required for the complete job as per direction of engineer-in-charge., providing & fitting fixing of fixed 1, 50 mm thick suitable aluminium framed partition with 4 mm plain or coloring glass providing opening for door etc and necessary accessories as required for the complete job as per direction of engineer-in-charge., providing & fitting fixing of 1.5mm thick aluminium framed (3.5 x1.75 ) door based on hydraulic floor spring, made of 12 mm pre-laminated board & 6mm thick plain or coloring glass in top with upper / lower closer and necessary accessories as required for the complete job as per direction of engineer-in-charge., providing & fitting fixing of twin type door hydraulic floor spring based, made of 12 mm thick plain or coloring glass with suitable standard & approved aluminium frame in top and bottom including necessary accessories as required for the complete job as per direction of engineer-in-charge., providing & fitting fixing of 1.5mm thick aluminium framed (3.5 x1.75 ) hinge swing door made of 12 mm pre-laminated board & 6mm thick plain or coloring glass in top with necessary accessories as required for the complete job as per direction of eng.-in-charge., (b) color coated aluminium framed providing & fitting fixing of aluminium framed (24 series, 1.50mm thick ) upper part fixed & sliding shutter in 2 (two) track window as approved design of department with 4 mm thick plain or coloring glass etc and necessary accessories for suitable locking & handling arrangement for the complete job as per direction of engineer-in-charge., providing & fitting fixing of aluminium framed (24 series,1.50 mm thick ) upper part fixed & sliding shutter in 3 (three) track window as approved design of department with 4 mm thick plain or coloring glass etc and necessary accessories for suitable locking & handling arrangement for the complete job as per direction of engineer-in-charge., providing & fitting fixing of aluminium framed window upper part fixed & open able shutter in 2 (three) part (40 series, 1.50 mm thick ) with 4 mm thick plain or coloring glass etc and necessary accessories for the complete job as per direction of engineer-in-charge., providing & fitting fixing of aluminium framed window upper part fixed & openable shutter in 3 (three) part (40 series, 1.50 mm thick ) with 4 mm th

CTN :45628873

29 Jun, 2026 53.71 Lacs

Puducherry - Tamil Nadu

Tender For construction of 400 bedded boys hostel building at jipmer campus, puducherry. (civil work): building portion including internal water supply lines, sanitary installation, drainage, demolition of existing quarters & other development works. (electrical and mechanical installation): package c1: providing internal e1, c2: providing fire alarm system, c3: providing firefighting system, c4: providing cctv, c5: providing 3 nos 13 passenger lift, c6: providing 5000 lpd solar water heater, c7: providing networking, (agreement no. 32/ee(puducherry)/cpwd/2023-24) sub head: risk & cost under clause 14 for providing and fixing of fire door(recall-2 tender id of pervious call 157879).subwork/packages:risk & cost under clause 14 for providing and fixing of fire door. (recall-2 tender id of pervious call 157879).

Central Government / Public Sector

CTN :45611484

10 Jul, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply of swing door frame with panel (lh) to rdso drg no : wd-90030-s-66, item- 01 along with items-1a,4,5,6,7,8,8a,9,11&13 in assembled condition, alt : 10. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45604810

27 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of set of double side swing doors confirming to icf specification no. icf/md/specn.-268. 1) double side swing door assembly (alu. door with s.s fixing frame) to icf drawing no.icf/sk3-5-6-014 col-i alt.-j/nil qty.-1no/set. 2) double side swing door assembly (alu. door with s.s fixing frame) to icf drawing no. icf/sk3-5-6-014 col-ii alt.-j/nil qty.-1no/set [ warranty period: 36 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45454991

10 Jul, 2026 NA

Vijayawada - Andhra Pradesh

Tender For corrigendum : supply of swing door frame with panel (lh) to rdso drg no : wd-90030-s-66, item- 01 along with items-1a,4,5,6,7,8,8a,9,11&13 in assembled condition, alt : 10. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Co-operative

CTN :45574213

30 Jun, 2026 12.00 Lacs

Multi City - Karnataka

Tender For supply, erection and execution of lab furniture along with puff wall panel to the existing micro biology room in the new packing block of shivamogga dairy, shivamogga. - supply and installation of lab furniture as per the drawing working table -01 size: 6410 l x 900 dx900 h with one sink set , supply of lab furniture island table as per the drawing working table -02 size: 3650l x1550 d x900 h , supply of lab furniture l table as per the drawing working table -03 size: (3050+3660) l x 750 d x 900 η , supply of lab furniture wall table as per the drawing with one set sink , working table -04 size: 3375 l x 750 d x 750 h , supply and installation of sandwiched wall panels of minimum 50 mm thickness. both side epoxy powder coated (60-80 microns) 0.6mm thick pcgi sheets on both sides with puff of density 40 ± 2 kg/m3 as infill. , necessary stiffners to be provided as per manufacturer's standard. includes c-channel, l track, silicon sealants and necessary accessories as per the panel quantities , supply and installation of clean room door with not less than 46mm thick door leaf and frames equal to 80 mm thickness with properly leveled , replaceable view panel/glass , both side epoxy powder coated (60-80 microns) 0.8mm thick g.i sheets(hot dipped with zinc coating of 120 gsm)with paper honey core as infill the door panel should meet the euro classes minimum reaction to fire , door to be provided with necessary stiffners , complete with, double glazed view panel (300x300/150x150 mm) with 6mm toughened (with 4 sided beveled and smooth edges, with moisture traps using silica gel between panes), both side ss304 'd' handle (18ø dia and 254 mm length). , includes door closure, ss lock with key. d1: single leaf door 1000 mm (w) x 2100 mm (h) x 100mm (t) , supply and installation of aluminum coving with back support , supply and installation of aluminum 2d and 3d corner cups for the covings , supply and installation of aluminium powder coated outer covings , supply and installation of pvc conduits , supply and installation of double glazed view panels of size 900mm (w) x 200mm (h) with toughened glass thickness 5mm in the panels. , removing of existing and shifting of panels as per site conditions , removal and fixing of existing 5ft door , apron storage cabinet made of 1 mm ss304 material with center partition and one hanger with bottom shelfs for shoe and gloves storage. size: 600 lx 450 d x 1800 η

CTN :45540514

19 Jun, 2026 13.50 Lacs

Sikar - Rajasthan

Tender For supply and fixing of fire door ot door ups and epabx in 100 bedded sub district hospital laxmangarh district sikar

CTN :45518128

16 Jun, 2026 28.08 Lacs

Jaipur - Rajasthan

Tender For providing and fixing fire doors in admin block, new wing, exhibition halls in jaipur house, national gallery of modern art building in jaipur house, dg. 2025-26 (3rd recall)subwork/packages:providing and fixing fire doors in admin block, new wing, exhibition halls in jaipur house, national gallery of modern art building in jaipur house, dg. 2025-26 (3rd recall)

Fire Door Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government / Public Sector

Co-operative