Latest fire extinguisher equipment Tenders | Government fire extinguisher equipment Tenders

Central Government/Public Sector

CTN :45275210

23 Jun, 2026 NA

Ramgarh - Jharkhand

Tender For corrigendum : installation of fire protection system in acc unit 1 and 2 at pvunl, patratu.

corporations/Associations/Others

CTN :45260953

19 Jun, 2026 8.14 Lacs

Jaipur - Rajasthan

Tender For corrigendum : tender for supply of solar pv panel topcon - 15 kw , grid connected inverter/ power conditioning unit (pcu) alongwith built-in meter , module mounting structure (mms) , structure accessories , net meter and solar meter , array junction box , dcdb , acdb , string and jumper , earthing and cable , lighting arrestors , lighting protection system (lps) , surge protection device (spds)- surge arrestor , connectors , conduits and pipes. , dc cable for string and jumper , power cable from inverter to acdb , power cable for earthing - 15 kw , ac armored aluminum cable - 15 kw , installation , testing and commissioning - 15 kw , grid islanding protection as per nit , danger boards & signages as per nit , fire extinguishers as per nit

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

State Government

CTN :45481413

15 Jun, 2026 NA

Khaperkheda - Maharashtra

Tender For erection of dedicated fire water network / ring-main for fire protection of bunker, unit # 1 to 4 (210mw)

corporations/Associations/Others

CTN :45487408

24 Jun, 2026 NA

Moga - Punjab

Tender For re-filling, repairing & painting of fire extinguisher equipment at various sub-stations under p&m division, pstcl, moga

CTN :45498301

17 Jun, 2026 4.19 Lacs

Kurnool - Andhra Pradesh

Tender For vertical extension on existing g plus floor bharat ratna abdul kalam boys hostel building rcc framed structure from 5th to 9th floors completion of hostel rooms in all respect in 5th and 6th floors including water supply sanitary installations and drainage and construction of a fire escape lift with lobby from ground floor to 9th floor and providing iei and fans dbs ug cables earthing and lighting protection manual fire alarm system and fire extinguishers extension of firefighting with down comer system upgradation of manual fire alarm system upgradation of existing 13 passenger lift 16 passenger fire man lift 20 kva ups system cctv system lan networking system and solar hot water system etc in indian institute of information technology design and manufacturing iiitdm kurnool campus at jagannatha gattu hill dinnedevarapadu kurnool district andhra pradeshsubwork/packages:providing additional light or fan or call bell points power points wall mount fans replacement of ups batteries installations of ac unit in the office of ee c cpwd at iiitdm campus kurnool

CTN :45474479

22 Jun, 2026 24.82 Lacs

Kota - Rajasthan

Tender For supply of asco make solenoid valves and spare kits for unit 1 to 6 , ktps, kota for fy 2026–27. - asco make solenoid valve p.a. gen shut off for unit # 3,4& 5, cat no. ht8344b066mo.110/50(nema) , asco make solenoid valve p.a. gen shut off for unit # 6 , cat no. ht8344b066mo.240/50(nema) , asco make spare kit for p.a. gen shut off for unit # 3,4,5&6 cat no. a302730mo (ask for (ht)8344b66mo/68mo.ac) , asco make solenoid valve for rc air gate valve cat no. : wptht8344b052mo- 110v ac rc gate unit#5 , asco make solenoid valve for rc gate valve cat no. wptht8344b052mo-220/50 unit#6 , asco make solenoid valve purge air dampers unit#5 valve cat no. : wptht8344-044mo. 110/50 , asco make solenoid valve for purge air damper unit # 6 cat no. : wptht8344-044mo.240/50 , asco make solenoid valve acfor fire protection unit #5 &6 cat no. : wpt8320a184.240/50 , asco make solenoid valve greasing system of mills unit #6 cat no. : wpt8320a184.240/50 , asco make solenoid valve for burner corner valve, cat no. : ht8322b012vmb.110/50(nema dual) unit#1,2,3,4&5 , asco make solenoid valve burner corner valve for u#6 , cat no. : ht8322b012vmb.240/50(nema dual) , asco make spare kit for horv/hotv/lotv valve unit # 1, 2, 3, 4,5&6kit no. c316753v (ask for ht8322b012vmb.ac) , asco make spare kit for emergency damper unit # 5&6, part no. : wpc302743mo (ask for wp8344-044modc) , asco make solenoid valve for unit # 5 sb drain valve, cat no. : wpt8320a184.110/50 , asco make solenoid valve for unit # 6 sb drain valve, cat no. wpt8320a184.230/50 , asco make solenoid valve ignitor for unit # 1, 2, 3, 4, & 5,cat no. : wpthb8342c001mo.110/50 , asco make solenoid valve ignitor for unit # 6 cat no. : wpthb8342c001mo.240/50 asco make solenoid valve for bfp rec, cat no. wpt8320a172.220/dc , asco make solenoid valve for dust level, model no. 19201002-230v/50hz

Central Government/Public Sector

CTN :45488083

16 Jun, 2026 NA

Multi City - Jharkhand

Tender For auction sale of others - disposal of scrap released materials such as: (1) smps ips dcdp (r), qty=02 nos. (2) smps ips smrs (r), qty=03 nos. (3) ufsbi (r), qty=10 nos. (4) data logger, qty=02 nos. (5) universal axle counter/reset box, qty=24 nos. (6) copper strip, qty=109.9 mtr. (7) ct box 20 pairs, qty=35 nos. (8) ct box 10 pairs, qty=10 nos. (9) eld, qty=03 nos. (10) track feed battery charger, qty=81 nos. (11) ct box 50 pairs, qty=01 no. (12) ips status monitoring panel, qty=03 nos. (13) ufsbi alarm panel presentive, qty=08 nos. (14) fire alarm panel, qty=05 nos. (15) lightning surge protection unit, qty=03 nos. (16) lpd spd box, qty=03 nos. (17) remote terminal unit, qty=02 nos. (18) stm cabinet, qty=04 nos. (19) autometic battery charger, qty=01 no. (20) filter unit, qty=08 nos. (21) track circuit choke type-b, qty=162 nos. (22) sm penal c double line, qty=04 nos. (23) fire extingusher, qty=04 nos. (24) vft transformer, qty=60 nos. (25) relay, qty=1337 nos. (26) ctr, qty=10 nos. (27) signal post (r), qty=35 nos. (28) location box half (r), qty=38 nos. (29) location box full (r), qty=130 nos. (30) relay rack, qty=21 nos. location:- released materials of rvnl lying near lthr station in ttipl campus(ssr), sse/sig/brwd, jharkhand.

State Government

CTN :45454910

11 Jun, 2026 3.70 Lacs

Jaipur - Rajasthan

Tender For co2 type fire extinguisher equipment supply installation testing and commissiong

State Government

CTN :45353121

04 Jun, 2026 NA

Khaperkheda - Maharashtra

Tender For erection of dedicated fire water network / ring-main for fire protection of bunker, unit # 1 to 4 (210mw), tps-khaperkheda including supply of the material

Fire Extinguisher Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

State Government

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government