Latest fire pit Tenders | Government fire pit Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

CTN :45707583

11 Jul, 2026 NA

Ferozepur - Punjab

Tender For material and labour for construction of view cutting fence (2200 mtr) in ferozepur - site clearance complete all as specified and as directed. , excavating in trenches, not exceeding 1.5 m wide or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth for foundation etc and getting out in soft/loose soil complete all as specified & directed., , excavating in post holes each n. exc. 0.5 cum and getting out in soft lloose soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm complete all as specified., , material and labour for providing cement concrete in foundations 1:4:8 type d2 (using 40mm graded stone aggregate) filling and mass concrete complete all as specified & directed, , material only for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed., , material and labour for providing cement concrete 1:2:4 type b1 using 20mm graded aggregate as in copping including weathering, slightly rounded or chamfered angles and necessary formwork complete all as specified and as directed, , material only for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed., , supply and fix rolled mild steel fe-410 (grade e-250a) angle or tee section as in post, cut to length and bend to shape as directed, fixed independetly without connecting plate etc, including provision of 05 to 06 nos gaps/outs/holes in each post for providing/laying ppgi sheet and one coat of red oxide zinc chrome primer after preparation of new steel surfaces complete all as specified and as directed., , supply and fix rolled mild steel fe-410-w (grade e-250) quality a framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed., , supply and fix of pre-painting galvalume sheets having pitch 190mm, depth 29mm and not less than 0.50mm thickness having tensile strength of 550 mpa (galvalume base-ppgl trapezoidal profile sheets) fixed with self tapping screws of size 75/100mm and aluminium washer of suitable size in view cutting complete all as specified and as directed.

State Government

CTN :45705845

30 Jun, 2026 NA

Pinjore - Haryana

Tender For cc interlocking paver blocks providing and laying 80mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. , maintenance of roads removal of existing ipb by manual means and disposal of dismantled material with all lead and lift as per technical specification clause 202.3. ,maintenance of roads relaying of available (removed and stacked) interlocking paver block pavement having thickness 100mm/80 mm/ 60 mm (average = 80mm) as per drawings and technical specification clause 1504 , excavating trenches of required width and depth for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m. 1.2. all kind of soil pipes, cables etc, exceeding 80 mm dia but not exceeding 300 mm dia ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 1. nominal concrete 1:1.5:3 or richer mix (i/c equivalent design mix) cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size)

State Government

CTN :45687980

03 Jul, 2026 NA

Kangra - Himachal Pradesh

Tender For repair of shamshan ghat in ward no.3 gp dodhamb (under vkvny (mlalad)demolition of slab, form work, p/l 1:2:4, steel work and corrugated g.i sheet roofing on fire pit.

corporations/Associations/Others

CTN :45654198

29 Jun, 2026 5.00 Lacs

Madurantgam - Tamil Nadu

Tender For supply flood precaution materials and engagging oil engine motor for dewatering of water logging area madhuranthagam municipality - supply and delivery of sand bag (m sand) including cost and conveyance of all materials and all labour charges etc., complete (the shown by the department officers), supply and delivery of casherina tree (sauvku) of 3" dia to 2 1/2" dia height of 10 (each 1 number 4 kg) including cost and conveyance etc., complete, supply and delivery of tree cutting power saw including loading and unloading charges etc., complete, supply and delivery of modern raincoats are often constructed from waterproof fabrics that are breathable, such as gore-tex or tyvek and dwr-coated nylon including loading and unloading transport charges etc., complete, dewatering of rainwater in water logging area using oil engine including cost and conveyance in hire charges of vechile including fuel charges and opperating charges and incidential charges and all labour charges etc., complete, 7.5 hp motor, 5 hp motor, 3 hp motor, 2 hp motor, hireing charges for temporary arrangements for generator for 500 kva including for labour charges etc., complete, ordinary soil (ss20b) earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil including excavated earth (ss20b) desilting channel/drain ,culvert. manpower .mazdoor category - ii, add gst 18%

CTN :45655338

27 Jun, 2026 4.16 Lacs

Vikarabad - Telangana

Tender For procurement of manholes and materials for repairs and maintance to ugd pipelines in vikarabad municipality under municipal general funds - raising of existing manholes to additional height by laying cc (1:3:6) cover bed block of clear dia 0.56m including the cost and conveyance of all materials and curing for 21 days complete all taxes seignarage charges as per specification etc complete. , phe-ljsw-13: supply, lowering and laying in ready made trench true to alignment and gradient, jointing, and testing of stone ware pipes including cost of jointing material such as cement mortar (1:1) proportion and spun yarn including cost and conveyance of pipe. (reference to specifications bis no. 6530/72) - 150mm dia , manufacture as per bis:12592 (part 1&2) supply & delivery of manhole covers and frames with isi marking anywhere in t.g., f.o.r. destination including, loading, un-loading & stacking at site but excluding all taxes, as applicable.i.s.i mark - h.d.-20 with 500mm dia clear opening , earthwork in excavation for pipeline trenches as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth (rbr-fndn-1 -manual means) , dismantling of cement concrete benching around the manhole frame carefully without damaging the frame and removal and refixing of manhole frame true to alignment and gradient of the road as directed by the engineer in charge including cost of labour etc. complete for finished item of work. , cutting opencc road surface (as well as asphalt concrete upto 75 mm thick ) including water bound macadam and stacking of excavated materials for pipe line trench work. as directed by the departmental officers. , construction of sewer circular conical manhole as per type design using flyash bricks of size 290 x 225 x 140 mm having minimum crushing strength 75 kgs per sqm as per is:12894-1990 - class - 7.5 using sulphete resisting cement in cm (1:6) prop; including cc (1:4:8) bed for foundation and of m15 (1:2.5:5) prop. using 20mm hg metal for benching and channels, inside plastering with 20mm thick using sulphete resisting cement in cm (1:3) prop; and outside plastering with 20mm thick using opc in cm (1:3) prop; the foundation concrete in cc (1:4:8) prop. using 40mm nominal size hard broken granite stone and supporting incoming pipes with concrete block / masonary wherever necessary including finishing the gap with cm (1:3) prop. on both the sides including excavating pits upto required depth in all types of soils and supply and fixing of 560mm dia manhole frame and cover (hd-20) and pvc encapsulated steps including cost & conveyance of all material, labour and all other incidental and operational charges etc., complete

CTN :45645216

02 Jul, 2026 NA

Kangra - Himachal Pradesh

Tender For restoration of rain damages of lwss pir saluhi shantla in tehsil rakkar distt. kangra hp (sh: deploying of earth cutting excavating machineries for shifting of r/main, g/main & distribution lines away from road due to road widening work at various location under lwss pir saluhi shantla & lwss aloh punani).

CTN :45590727

27 Jun, 2026 NA

Jalpaiguri - West Bengal

Tender For supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1),lighting pole or post and hardware - tubular street light poles (v2),material and labour,testing,installation,repair,repair,welding,excavating in trenches,returning filling in,removing excavated material,material and labour,supply and laying,m l for,supplying and fixing,ml for cement,ml for pcc,disconnecting taking out,material and labour,testing,installation,repair,installation,electrical work

CTN :44855837

12 Jun, 2026 NA

Jalpaiguri - West Bengal

Tender For bid to ras supply of excavating in trenches n exc 1.5m wide as per scoope of work , m and l pcc type d2 using 40 mm graded stone as per scoope of work , returning filling in including spreading levelling as per scoope of work , m and l sand filling under floors or in foundations as per scoope of work , surface dressing n. exc 15 cm deep in soft loose soil as per scoope of work , m and l for stone hardcore of gauge as per scoope of work , m and l for 100 mm thick pccm as per scoope of work , m an l for prepolished chemically treated as per scope of work , m and l for brick works with fly ash bricks straight as per scope of work , m and l for brick works with fly ash bricks straight as per scoope of work , m and l for rcc nominal mix type b1 as per scoope of work , m and l for mild steel tmt bars 10mm dia and overas per scoope of work , formwork to sides and soffits of flooras per scoope of work , material and labour for vitrified ceramic joint free as per scoope of work , m and l for vitrified ceramic joint free tiles as per scoope of work , m and l for 15 to 18 mm thick granite as per scoope of work , m and l repair of 18mm thick marine ply laminatedas per scoope of work , m and l as in repair sheet glass 3 mm thick as per scoope of work , m and l for 12 mm thick ply gradei as per scoope of work , m and l 100 mm long stainless steel hinges as per scoope of work , m and l stainless steel c profile handle including as per scoope of work ) /bid number : gem/2026/b/7403889 * /dated: 11-04-2026 & & / bid document 1 / 22

Central Government/Public Sector

CTN :45466897

19 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 41 )items as given below ,[1] point wiring thru pvc casing as per sow 10.000 ea,[2] supply mini manual motor starter 10.000 ea,[3] supply&instln,exhaust fan,230v,50hz 3.000 ea,[4] supply&instln,spn mcb db,8way,20a 1.000 ea,[5] point wiring of light fittings etc. 10.000 ea,[6] fixg mosaic mechnm modular 6a socket 10.000 ea,[7] point wiring,light,fans/exhaust,5/15a pt 8.000 ea,[8] wiring light pt in conceal/conduit pipe 150.000 m,[9] wiring 15a a/c point w/new pvc casing 50.000 m,[10] disman cbl tv point wiring,new laid pipe 40.000 m,[11] excavation of cable trench & dressing 20.000 m,[12] excavating of cable trench 5.000 m,[13] fixg,casing,pvc 100.000 m,[14] ern,jb w/cable 20.000 ea,[15] instln,exhaust fan,230v,50hz,300mm 1.000 ea,[16] instln,wall mtd tpn/spn mcb db,32a 20.000 ea,[17] supply,tpn mcb,63a/,6way 1.000 ea,[18] 6a, 240 volt one way flash type switch 15.000 ea,[19] 6a, 240 volt 2 & 3 pin plug multi socket 15.000 ea,[20] 6a, 240 volt two way flash type switch 15.000 ea,[21] 6a, 2 in 1 socket switch combined 15.000 ea,[22] 16a, 240 volt flash type switch 15.000 ea,[23] 6a/ 16a, 240 volt twin plug socket 15.000 ea,[24] 240 volt calling bell 15.000 ea,[25] main switch of 2 pole dp 16a neutrallink 10.000 ea,[26] 2 pole dp, 32 a, 240 volt dp 5.000 ea,[27] supp/inst 16a/32a mcb, spn 10.000 ea,[28] supp/inst 16a/32a mcb, dp 10.000 ea,[29] supp/inst 32a/63a mcb, 4 pole 10.000 ea,[30] supp/inst main switch 63a, 440v, 4 pole 2.000 ea,[31] sup & lay hdpe pipe pe-80,pn-6,dia 110mm 10.000 m,[32] sup & lay hdpe pipe pe-80,pn-6,dia 90mm 10.000 m,[33] sup & lay hdpe pipe pe-80,pn-6,dia 63mm 20.000 m,[34] point wiring light,fan,socket 10.000 ea,[35] point wiring ac, gyser 5.000 ea,[36] wiring 2 x 1.5 + 0.75 sqmm cu wire 250.000 m,[37] wiring 2 x 2.5 + 1.5 sqmm cu wire 150.000 m,[38] wiring 2 x 4 + 2.5 sqmm cu wire 40.000 m,[39] supp fix 5a_ceiling rose 30.000 ea,[40] attending no power in shift 990.000 ea,[41] supplying, replacing of fan condenser 25.000 ea

Fire Pit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

corporations/Associations/Others

Central Government/Public Sector