Latest fish bolt Tenders | Government fish bolt Tenders

Corporations/Associations/Others

CTN :43186013

17 Jun, 2026 15.00 Lacs

Washim - Maharashtra

Tender For corrigendum : supply of handpump material - supply of handpump material and bleaching powder - hand pump pipe coupling g. i 32mm. connecting rod of hand pump 43 meters coupling of connecting rod of hand pump ermm.m. hand pump head assembly with hand pump cylinder assembly water chamber of hand pump hand pump handle assembly hand pump bearing 6204 (isi mark) hand pump axle nut with bolt hand pump chains hand pump cylinder cap hand pump chain nut bolts (per kg) foundation of hand pump upper valve assembly of hand pump hadapampache upper whale guide cucumber lower valve assembly of the head pump

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

State Government

CTN :45290539

08 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For hand pump spares parts isi mark and conforming to is 15500 2021 (part 1 to 8) (with up to date amendment) - prevailing torque type steel hexagonal nutm10x1.5 is:7002, ball bearing 20 bc02pp is:6455, bolts for cover m 12x20 is:1363, washer for axle to suit m-12 is:2062, high tensile bolt m-10x40mm is:1364 part-i, hexagonal bolt m12x1.75x40 is:1363 part-i, hexagonal nut m12x1.75 is:1364 part-3, hexagonal coupler m12x1.75x50 is:15500 part-4, long bolt m12x1.75x20 for extra deep well is:1363 part-i, reducer cap painted for mark ii & extra deep well hand pump i.s.i. mark - 0.880 kgs approx., cylinder body with brass liner for deep well pump isi mark. - 2.50kgs approx., cylinder body with brass liner for extra deep well and vlom pump isi mark. - 3.20 kgs approx., plunger yoke body for all types of pumps i.s.i. mark. -0.260 kgs approx., spacer for nitrile rubber pump bucket for all types of pumps i.s.i. mark.-0.210kgsapprox., follower for mark-ii deep well i.s.i.mark.- 0.280kgs approx., follower for extra deep pump i.s.i.mark.- 0.370kgs approx., check valve seat for mark ii & extra deep well i.s.i. mark.- 0.210 kgs approx., check valve for mark ii & extra deep well i.s.i. mark, rubber seat retainer for mark ii & extra deep well 0.080 kgs approx., lowerspacerforextradeepi.s.i.mark.-0.200kgs approx., chain with coupling for all types of pumps i.s.i. mark.-0.550kgsapprox., front cover hot dip galvanized for all types of pumps i.s.i. mark.-1.230 kgs approx., bearing spacer for axle for all types of pumps i.s.i. mark, third plate galvanized for all types of pump i.s.i. mark. -1.400kgs approx., connecting rod for all types of pumps i.s.i.mark.-2.7kgsapprox., washer electro - galvanized i.s.i. mark, stand galvanized normal isi mark ii & vlom i.s.i. mark.-17.900 kgs approx., stand galvanized telescopic for marks & vlom i.s.i. mark.-19.750 kgs approx., stand galvanized normal for extra deep well i.s.i. mark.-18.700 kgs approx., stand galvanized telescopic for extra deep well i.s.i.mark.-20.500kgsapprox., handle comprising handle bar, bearing housing & chain guide for mark ii & vlom i.s.i. mark, handle comprising handle bar, bearing housing & chain guide for extra deep i.s.i. mark, t bar for extra deep well i.s.i. mark, counter weight for extra deep i.s.i. mark. -12.00 kgs approx., water tank complete for mark ii deep well & extra deep well hand pump i.s.i. mark. - 7.80 kgs approx., head complete for mark ii & vlom i.s.i. mark.-10.220 kgs approx., head complete for extra deep well i.s.i. mark.-10.150 kgs approx., s.s. handle axle for all types of pumps i.s.i. mark.-0.350 kgs approx., s.splungerrodformarkiii.s.i.mark.-0.430kgs approx., s.s. plunger rod for vlom & extra deep well i.s.i. mark.- 0.470 kgs approx., rubber seating for upper valve for all types of pumps i.s.i. mark, pump bucket of nitrile rubber for all types of pumps i.s.i. mark, rubber seating for lower valve for mark ii & extra deep i.s.i. mark, sealing ring for mark-ii & extra deep well i.s.i. mark, head assembly complete with handle assembly, for mark ii & vlom isi mark., head assembly complete with handle assembly for extra deep isi mark, handle assembly complete for mark ii deep well & vlom pumps isi mark.-10.250 kgs approx., handle assembly complete for extra deep well hand pump isi mark. -15.350kgsapprox., cylinder assembly complete for mark ii deep well hand pumps isi mark.-6.10kgs approx., cylinder assembly complete for extra deep hand pump isi mark.-7.00kgsapprox., plunger valve assembly suitable for nitrile bucket comprising of plunger yoke body, upper valve, spacer follower pump bucket & upper value seating for mark ii deep well hand pump consisting of isi mark spares., plunger valve assembly suitable for nitrile bucket comprising of plunger yoke body, upper valve both spacers, follower pump bucket & upper value seating for extra deep well hand pump consisting of isi mark spares., check valve assemb

State Government

CTN :45303634

30 May, 2026 NA

Ranchi - Jharkhand

Tender For e quotation for none schedule item rate - stone boulder of size 150 mm and below at quarry, supply of quarried stone 150 - 200 mm size for hand broken at quarry, boulder with minimum size of 300 mm for pitching at quarry, gravel/quarry spall at quarry, gelatin 80%, jute netting, open weave, 2.5 cm square opening for seeding and mulching, random rubble stone, sand bags (cost of sand and empty cement bag), square rubble coursed stone, stone bricks of size, (i) 250 mm x 125 mm x 100 mm, (ii) 250 mm x 125 mm x 125 mm, (i) g.i. wire (8 to 10 swg), (ii) black annealed (8 to 10 swg), binding wire, (i) annealled wire (20 to 25 gauge), (ii) black annealed (20 to 25 gauge), expanded metal (18 gauge) 40 mm x 25 mm x 75 mm wide, bituminastic board (for use as per expansion joint i.s.1838-1938 filter), (i) 25 mm thick, 150mm dia r.c.c.np2 perforated pipe, pressure release valve, (i) safety valve, (ii) pocket valve, cost of burnt clay pipe of internal dia 31.70 mm (11/4")external dia 38 mm (11/2"), (i)100 mm long, (ii)225 mm long, fuse coil, bolts 20 mm dia 25 cm long, coal tar, nuts and bolts 16 mm dia375 mm long with washer etc, palm leaves, check valve 38 mm dia., 38 mm dia. water hose 30m long, nx core bit 48 cts(imp), nx core bit 38 cts(imp), nx tc bit, bx tc bit, nx st reamer cell 6.5 cts(imp), bx st reamer cell 6.5 cts(imp), good quality wooden core box 3 metre long x 0.85 metre wide x0.15 metre deep with longitudinal compartment to accommodate 5 rows of 3 metre long cores i.e. total 15 metre

State Government

CTN :45300596

29 May, 2026 19.40 Lacs

Banda - Uttar Pradesh

Tender For dismantling and maintenance of pantoon bridge material providing and operating or power barge motor boat including supply of labours materials fuel and tandp etc required at bara galauli ghat of yamuna river situated at pailani bara road km15 fy 2026 - extraction of 10mm wire rope from railing post and making role., opening of ms plate and nut bolts from chequred plate., opening out man hole covers including loading, unloading cartage and stacking in store., dismentling of rs joist (5.2m) of pantoon bridge including cartage of material from site to ganghut including loading, unloading, labour, t&p etc placing as per engineer in charge., as per item no.-4 but railing post, as per item no.-4 but sal sleeper, as per item no.-4 but sal edging, as per item no.-4 but chequired plate., as per item no.-4 but other material such as pp rope, coir rope, washer, u clamp wire rope, nut bolts and ms plate, cartage of pantoons in shallow water by rolling after disconnection pantoon pair in the bank of river as per direction of e/i, supply of moter boat/power barge also including all labour, like mallah, beldar, driver, helper transpotation pulling equpement like boat etc. required for the above work as per direction of engineer-in-charge for during mansoon period., supply of labour for watch & ward day & night for the pantoons either in jute form or in single in yamuna river including dewatering of pantoons if required for shifting of pantoon jutes in the river water as per situation of flood to bring the pantoon jutes at the bank side (safe position) & also including all labour, like mallah, transpotation pulling equpement like boat etc. required for the above work as per direction of engineer-in-charge at bara ghat for during mansoon period with 11 beldar, 2 mallah extra & one large boat per day.

State Government

CTN :45300598

29 May, 2026 19.60 Lacs

Banda - Uttar Pradesh

Tender For dismantling and maintenance of pantoon bridge material providing and operating or power barge motor boat including supply of labours materials fuel and tandp etc required at madaulikala adharwal ghat of yamuna river in the fy 2026-27 - extraction of 10mm wire rope from railing post and making role., opening of ms plate and nut bolts from chequred plate., opening out man hole covers including loading, unloading cartage and stacking in store., dismentling of rs joist (5.2m) of pantoon bridge including cartage of material from site to ganghut including loading, unloading, labour, t&p etc placing as per engineer in charge., as per item no.-4 but railing post, as per item no.-4 but sal sleeper, as per item no.-4 but sal edging, as per item no.-4 but chequired plate., as per item no.-4 but other material such as pp rope, coir rope, washer, u clamp wire rope, nut bolts and ms plate, cartage of pantoons in shallow water by rolling after disconnection pantoon pair in the bank of river as per direction of e/i, supply of moter boat/power barge also including all labour, like mallah, beldar, driver, helper transpotation pulling equpement like boat etc. required for the above work as per direction of engineer-in-charge for during mansoon period., supply of labour for watch & ward day & night for the pantoons either in jute form or in single in yamuna river including dewatering of pantoons if required for shifting of pantoon jutes in the river water as per situation of flood to bring the pantoon jutes at the bank side (safe position) & also including all labour, like mallah, transpotation pulling equpement like boat etc. required for the above work as per direction of engineer-in-charge at bara ghat for during mansoon period with 11 beldar, 2 mallah extra & one large boat per day.

State Government

CTN :45301374

29 May, 2026 NA

Barasat - West Bengal

Tender For repairing of 1 no. of 315 kva dtr ( indoor type ) with supply of materials and testing at rabindra bhawan, barasat under north 24 parganas zilla parishad. - hv bus hing 12 kv 630a , lv bus hing 1.1 kv 630a, , 1.1kv 630a stud-bolt with fittings - brass, , 34kv 250a stud-bolt with fittings - brass, , arcing horn, , insulating materials raman make, , insulating materials senapati 0.75mm, , cotton tape 315 kva, , gasket sheet 6 mm, , ms nuts, bolts & washers, , oil seal hvside, , oil seal lyside, , silica gel breather with silica gel of 500gm, , hv coil copper dpc, , loss 5% allowed, , transformer oil (ehv grade), , labour charges, , final survey with repairing charge 315 kva, , re-assembly & boxing up of 315 kva including testing, , external painting 315 kva, , preparation & fitting of new coil - dpc (for hv cu coil), , preparation & fitting of new coil - dpc (for lv coil), , re winding of existing coil - dpc (for lv cu coil), , dismantling & re-installation of 315 kva transformer with necessary connection of terminals, earthing etc. at site, , transportation of transformer and oil barrels from site to workshop and vice versa

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

State Government

CTN :44927486

10 Jun, 2026 1.51 Crore

East Nimar - Madhya Pradesh

Tender For corrigendum : procurement of spare parts of ring granulator of l and t make for chp-i, 2x600mw, sstpp, mppgcl, dongalia. - suspension bar, moc- astm-a322 grade aisi 4140 suspension arm (01 set. = 25 nos. for one no. rg), moc-astm-a108/aisi 1045 end disc drive side, moc- astm-a108/aisi 1045 end disc non side, moc- astm-a108/aisi 1045 cage frame (without screen plates & adjusting mechanism), moc-is:2062 breaker plate, 1set=2nos for 1no rg with fixing bolts, moc-mn steel is:276, gr.iii 45mm thk. upper screen plate, 1set=2nos for 1no rg with fixing bolts, moc-mn steel is:276, gr.iii 45mm thk. lower screen plate, 1set=2nos for 1no rg with fixing bolts, moc-mn steel is:276, gr.iii 45mm thk. kick off plate, 1set=2nos for no rg with fixing bolts, moc-mn steel is:276, gr.iii 40mm thk.

Co-operative

CTN :45305048

01 Jun, 2026 75.0 Thousand

Mehsana - Gujarat

Tender For job work jobwork with materials of 2.5"raw wtr 1 installation charges of pipe line - asbestors cement pressure pipes. , concrete pipes with and without reinforcement, , p.s.c pipes (including fittings), , method of tests for concrete pipes, , materials for m.s specials, , specifications for m.s specials for p.s.c pipes, , specifications for steel cylinders reinforced concrete pipes, , methods of tests of concrete pipes, , centrifugally cast (spun) iron pressure pipes for water gas and sewage including fittings, , specifications for centrifugally cast (spun) d.i pipes for water, gas and sewage, , d.i fittings for pipes for water, gas & sewage, , dimensional requirements of rubber gaskets for mechanical joints and push on joints for the use with c.i d.i pipes, , ci specials for mechanical and push on flexible joints for pressure pipe lines for water gas and sewage, , horizontally cast iron double flanged pipes for water, gas and sewage, , cast iron fittings for pressure pipes for water, gas and sewage, , a) rubber rings for jointing c.i pipes,, , rcc pipes & a.c pipes, , b) rubber rings for jointing psc pipes, , rubber rings for jointing ac pipes with ac couplings, , pig lead, , hemp yarn, , rubber insertion to be used in jointing c.i d.f pipes, , bolts & nuts to be used in jointing c.i d.f pipes

Fish Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors