Latest fishing material Tenders | Government fishing material Tenders

Central Government / Public Sector

CTN :45054924

12 May, 2026 NA

Multi City - Telangana

Tender For auction sale of others - 74081-26-04-001-hyb-mly- ms water tank: scrap. cond. unserviceable ms water (predominant ferrous structure) consisting of rails and ms flats, pvc water tanks. total nominal weight of lot=87.12 mt. total number of ms water tanks=01. the offered is for sale and for dismantling/demolitionpurpose available under the jurisdiction/custody of sse/works/mly, delivery by actual weightment basis only. (please check lot image for inventory and photos of the material) location. available inside tsmd compound- moula ali. ds 8 no. 074081-26-00020 dt.17.04.2026. state telangana. pl no.98050011 hsn code. 72044100. refer to depot conditions for gstin of state railways, list of holidays and other conditions. special conditions. 1. approximately, 100 meters distance material shifting shall be done by purchaser to reach proper approach road. 2the tsmd pitwheel lathe ohe line is available beside the water tank. therefore care shall be taken while dismantling. 3.in order to make an assessment the purchaser may visit the lot location and inspect the lot and satisfy themselves before bidding. 4. post-auction no representation shall be entertained. 5. the purchaser shall be liable to make good any damage loss caused to railway property during cutting and delivery. 6. the bidder should provide proper barricading all-round the structure to prevent damaging of adjoining structures from dismantled material and not to endanger the safety of human beings and public/ private property in vicinity. purchaser should place safety banner surrounding the work place/ spot. 7. gas cutting is permitted. 8. the purchaser has to make his own arrangements such as tools, lifting tackles, gas cutting equipments and necessary trained men for cutting, loading & clearing the debris etc. they should have fire fighting arrangement and first aid box for any emergency. 9. delivery by actual weighment basis only.

corporations/Associations/Others

CTN :45045205

14 May, 2026 1.63 Crore

Raigad - Maharashtra

Tender For supply of tent , chair , table , torch , dragon torch , rain suit , patrolman stick , punji , pick axe beater , walkie talkie , clip applicator , rail disc cutter , rail disc cutter wheel stone , rail drilling machine , rail drilling tool , chamfering kit , at welding trimmer , rail heating blower for at weld , thermit welding tool set , rail profile weld grinder , rail grinding stone , straight edge , track jack , track jack mechanical , rail dolly , rail tong , prc sleepers chain , joggled fish plate , fish plate 1 mtr long , c clamp , anti sabotage device , anti sabotage device key , fish bolt spanner , hammer 5kg , hammer 3kg , digital toe load measuring device , rail tensioner , hydraulic sleeper spacer , mono rail wheel barrow , portable dc welding generator , rail wear gauge , continuous rail thermometer , laser distance meter , electric jumper wire , jim crow , rail thermometer , pwi inspection kit , versine measuring kit , track gauge cum level , destressing roller , off track tamper , off track tamper trolley , tamping tools , acd male , acd female , electric arc welding machine , banner flag , hs flag red , hs flag green , safety jacket , safety helmet , safety shoe , tricolor torch , number plate , staff for patrol man , key man bag , breathe analyzer , keying hammer , pway inspection trolley , material trolley , dip lorrey , measuring tape 30mtr , measuring tape 15mtr , measuring tape 5mtr , steel sections cutting equipment , plate screw tubular spanner , wire basket , adjustable spanner , whistle , powrah spade , rake ballast , pan mortar , wooden blocks , chain saw , bush cutter , tarpaulin , grease , grease gun , caution indicator boards , speed indicator boards , termination boards , column posting for boards , generator , remote controlled gang hooter , safety goggles , ambient temprature thermometer , small testing hammer , inspection cum chipping hammer , elcometer , pocket steel tape , straight edge 1m , measuring tape 30m , log line with 20 kg mettalic clinder , probing rod , inside calliper outside calliper , feeler gauge , mirror 10x15 cm , bridge inspection torch light , magnifying glass 100 mm , piano wire with clamps , plumb bob , steel scraper , binoculars , current meter , echo sounder , schmidts hammer , dye penetration kit , magnetic crack detector , welding gauge , safety belt , duro meter , auto level , hydraulic torque wrench , hexagonal crowbar , tommy bar , fire buckets with stand , emergency medical hand stretcher , first aid box - first aid box , tool box , hammer 500gm , gum boots //bid details 2 / 96

CTN :45042590

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, bobrnm1, boxnr & boxnrm2 wagons no as following: [1] scr 10099662256 boxnm1 [2] er 72029660312 bobrnm1 [3] ser 10079768312 boxnm1 [4] scr 10099734601 boxnm1 [5] scr 10099663109 boxnr [6] ser 10079664607 boxnm1 [7] cr 25019660267 boxnr [8] er 72029581600 bobrnm1 [9] special repair 10069660824 boxnm1 [10] scr 10099662881 boxnm1 [11] ser 10079664171 boxnm1 [12] scr 25099660645 boxnrm2 [13] ser 25079764509 boxnr condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (131.980 mt mt) is the lot quantity (131.980 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, boxnr & boxnrm2 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

State Government

CTN :45046874

08 May, 2026 12.36 Lacs

Multi City - Karnataka

Tender For 1)inspection of stator coil for identification of exact no. of the faulty coil and setting up the arrangements for rotor pole coils removing and rotation as per scope of works along with supply of materials and other consumables as per scope of works2)de-brazing the rotor pole terminations and removing the rotor poles (as required). dismantling of rotor poles using suitable and compatible tools, fixtures, and lifting arrangements. ensure safe handling and proper marking for reassemble. rotate and position the rotor appropriately to access the damaged stator coil area.3)remove insulation from both ends of the affected winding section.4)de-brazing of defective coils. 5)driving out the slot wedges carefully remove wedges from stator winding slots without damaging adjacent coils or core.(entire stator winding shall be inspected in case of loose wedges, worn out wedges and missing wedges shall be replaced) along with supply of materials and other consumables.6)insulation removal- remove insulation from both ends of the affected winding sections.7)cutting the coil bindings in both sides. cut the identified damaged winding portion using appropriate tools. carefully pull out the damaged coil from the stator slots without affecting surrounding windings.8)damaged winding cutting- cut the identified damaged winding portion using appropriate tools.9)winding extraction- carefully pull out the damaged coil from the stator slots without affecting surrounding windings. while removing the faulty coils from stator, utmost care should be taken to prevent any damage to stator core.10)removal of faulty coils from the slot.11)slot cleaning and preparation-clean stator inner tooth slots thoroughly. use emery paper to smoothen and maintain uniform slot condition.12)cleaning of carbon deposits/heavy oil content from complete stator coils through co2 cleaning process /dry ice blasting.13)new coil installation-insert new stator coil with proper alignment. fix securely using new wedges of appropriate grade and size.14)brazing of the coil ends.15)re-fixing the rotor poles and connecting them.16)insulation application-apply insulation as per specified class (e.g. class f/ classh). ensure proper curing and finishing.17)complete co2 / dry ice cleaning of stator and rotor.re insertion of removed rotor poles. 18)final checks & testing- insulation resistance (ir) test, high voltage (hvdc) test, continuity check, visual inspection and any other tests which are required (will be carried out by kpcl).19)assembling of removed damper doors and stator covers.20)maintain quality standards throughout the process & use calibrated tools and approved materials.21)presence of the agency during excitation and synchronization of the unit by kpcl.22)safety & quality-follow all safety procedures and ppe requirements

Central Government/Public Sector

CTN :45002102

16 May, 2026 NA

Papumpare - Arunachal Pradesh

Tender For supply and delivery of tools and plants for ctds-ap light weight torque wrench of 8 kg-m torque rating with required box spanners ( 12 to 28 mm size), steel wire rope sling for, a.12 mm x 10 meter both end spliced, b.12 mm x 3 meter both end spliced, c.12 mm x 1.5 meter both end spliced, nylon/ polyster sling, a. 0.5 meter-5 ton capacity, b. 1.0 meter-5 ton capacity, c. 2.0 meter-5 ton capacity, d. 3.0 meter-5 ton capacity, double ply polyester webbing sling, a. 1.0 meter- 1 ton capacity, b. 2.0 meter- 5 ton capacity, poly propylene rope(220 meter bundle ), a.12 mm dia, b.16 mm dia, c.20 mm dia, d- shackles, a.1 t capacity, b.3 t capacity, c.5 t capacity, bull dog clamp suitable for, a.8 mm, b.10 mm, c.12 mm, chain pulley block 5.0 ton capacity, ratchet hoist 6 ton capacity, close type single sheeve pulley 3.5 ton capacity, suitable, for 8 to 12 mm steel, close type single sheeve pulley of 5 ton capacity, suitable, for 10 to 12 mm steel wire rope, open type single sheeve pulley of 3.5 ton capacity, suitable, for 8 to 12 mm steel wire rope, open type single sheeve pulley of 5 ton capacity, suitable for 10 to 12 mm steel wire rope, single sheeve pulley of 2.5 t capacity for 18 mm dia, poly, propylene rope, single sheeve pulley of 5 t capacity for 20 mm dia polypropylene rope, light weight safety clamps of 2 ton capacity suitable for different type of wire ropes, single way fibre pulley block (2 ton capacity), two way poly propylene rope pulley (5 ton capacity)(2 nos-1 set), telescopic type discharge rods with copper/ aluminium connecting leads, clamps for 132 kv panther conductor (1 set consists of 6 leads with both end clamps and 1 no. of fibre glass telescopic rod), turn buckle open type 5 t capacity, steel wire rope, a.10 mm dia, b.12 mm dia, 4 sheeve pulley block 5 ton capacity with 10 mm dia steel wire rope( 2 nos- 1set), light weight automatic type come along clamps for panther, bolted type come along clamps for-panther, light weight automatic type come along clamps for earth wire - 3.15mm, hydraulically operated acsr conductor cutter suitable for cutting the acsr conductor of 25 mm to 40 mm diameter along with the required sizes blades handpump, hose pipe and other accessories, hydraulic earth wire cutter, angle cutter(motorized) with 12 nos. of spare blades, ratchet drill machine with bits of 8, 12 & 16 mm dia hole, light weight power winch machine 5t capacity ( small portable ,easy to transport), safety helmet, patta clamps suitable for steer wire rope of up to 12 mm, single sheeve aerial roller suitable for panther conductor, single sheeve aerial roller suitable for opgw

CTN :45007950

07 May, 2026 5.00 Lacs

Jhunjhunu - Rajasthan

Tender For annual rate contract for the procurement of cleaning tools/supplies and safety equipment for cleaning personnel

Central Government/Public Sector

CTN :45011608

05 May, 2026 NA

Samastipur - Bihar

Tender For supply of foot petrolling bag with tools kit consisting of i) de & ring spanner 24x27-01 set, ii) de & ring spanner 16x17-01 set, fiber tape 7.5 mtrs- 01 no, iii) high visibility safety jacket- 01 no, iv) analog type scale balance 50 kgs- 01 no, v) ball pan hammer- 1.5 lb, vi) plier combination 8 inch- 01 no, vi) suitable bag for keeping above tools- 01 no. make- taparia, stanley or similar. [ warranty period: 30 months after the date of delivery ]

CTN :44993224

04 May, 2026 NA

Delhi - Delhi

Tender For supply of boq boq c c - nk(sedule of tools for gen use by unit) , sch of tools for gen use by unitarm lt&fd , 708.411.001.000 , laquer safety red , 698 , curtains blue lightproof , niv (loctite 222) , loctite 222 , 7310-0003615 , electric kettle 1 ltr , 8520.000002 , soap toilet , 4k/1124 , trolley barrel , tz 435 , red tape , facom 555 bt , tools chest special , ln 9424 1.4546.9.08 , lock wire , we-0076 , stool wksp 11 long 10 wide 13 high , na (cleaning brush 1 ) , cleaning brush 1

corporations/Associations/Others

CTN :44970830

13 May, 2026 NA

Cuddalore - Tamil Nadu

Tender For providing of testing service for on-board /commissioned equipment/ instrument related to plant - lifting tools, tackles and belt conveyors; safety; as per scope of work