Latest flame photometer Tenders | Government flame photometer Tenders

Central Government/Public Sector

CTN :45121262

19 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of aerosol fire detection and suppression system cartridge 100gm (two per battery box) as per the technical requirement specified in annexure-g1 of rdso specn. rdso/pe/spec/ac/0192-2018 (rev.1) and rdso letter no. el/7.1.108/mssbc dt.17.09.2021. this shall be provided in the battery box of vb trainset. note: the additional mounting brackets to drg.no- aaa72258 is also in the supplier scope for installing the same in the battery box in addition to the aerosol holding bracket. note: aerosol-based fire detection & suppression system having action temperature should be 68-72 degree celsius as per latest rdso l. no. 2000/elect(g)/113/4/sefety(e/o no. 3477153 dated 07.01.2026 [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :45101795

20 May, 2026 NA

Nagpur - Maharashtra

Tender For design & development, supply, installation and commissioning of an ai and iot based hot axle & hot wheel detection and monitoring system incorporating bolometer based sensing technology & advanced thermal imaging frameworks to ensure accurate, real time temperature monitoring of axle boxes in high-speed rail operations. the scope covers system conceptualization, detailed design, hardware & softwaredevelopment, integration, testing, field validation & performance optimization. the final system configuration valuation features & commercial valuation shall be aligned with outcomes of development, testing & validation activities & may be finalized based on operational requirements identified during execution. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :45104682

12 May, 2026 NA

Bangalore - Karnataka

Tender For magnetic drum separator (double stage type) conforming to model/part no. efe-rwf-md-00 of electro flux equipments pvt ltd or model/part no. pml-917134510 of permanent magnet ltd or model/part no. bmx-369/1 of wesman engineering company pvt ltd, with the following specifications: technical specifications: 1. type of magnet: high power high gradient rare earth magnet (nd-fe-b) 2. magnet grade: n50 3. magnetic strength: minimum 3000-3500 gauss or higher at drum surface 4. maximum operating temperature: 80 deg c 5. separation efficiency: minimum 90% (preferably up to 95% or above) 6. drum material: stainless steel (ss) 7. drum diameter: 300 mm 8. drum width: 600 mm 9. number of drums: double10. drum surface hardness: 500-700 vickers drive system: 11) geared motor: 1.0 hp x 2 nos, 1440 rpm, 415v +/- 10%, 50 hz, 3 phase, continuous duty (s1), insulation class f or better 12) make of geared motor: premium make such as sew / bonfiglioli / nord or equivalent make 13) drive type: v-belt and pulley note: the supply consists of 1.complete unit with base frame, guards, fasteners and all accessories required forinstallation 2.suitable for continuous heavy-duty industrial operation 3. proper sealing arrangement to prevent dust ingress 4. anti-corrosive painting (except ss parts) 5. nameplate indicating model, serial number, year of manufacture and technical details (a) the bearings should be procured from authorised dealers and should be of skf/fag/ntn / timken / ina make only. (b) the firm should furnish bearing inspection certificate from manufacturers or their authorised testing agents along with the supply. (c) magnet strength certificate (gauss report) from manufacturer or nabl accredited lab to be furnished along with the supply. (d) material test certificate (mtc) for drum from nabl accredited lab to be furnished along with the supply. (e) warranty: warranty shall be 18 months from date of supply or 12 months from commissioning, whichever is earlier. (f) makes : electro flux / wesman / permanent magnet ltd only. [ warranty period: 18 months after the date of delivery ]

CTN :45119052

18 May, 2026 NA

Bikaner - Rajasthan

Tender For supply of field coil assy , solenoid switch , brush gear assy , assy pull cable , system protection valve , driven disc , mirror assy out rear view rh , assy clutch pressure plate , assy combination switch , sensor inlet air temperature

CTN :45120955

10 Jun, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply & installation of aerosol based fire detection and suppression system cartridge 100 gm ,total 01 piece including bracket ,piece required for installation of this item as per technical requirementspecified in thin annexure g-1 of spec no rdso/pe/spec/ac/0192 -2018 rev-1.the action temperature must be 68-72 degree celsius as per rdso letter no el/7.1.108 /sbc/main dt. 06-08-2025 . [ warranty period: 30 months after the date of delivery ]

CTN :45099179

27 May, 2026 NA

Shahapura - Rajasthan

Tender For supply of thermometer digree , series test lamp , knife switch dpdt fuse terminals , knife switch tpdt fuse terminals , miniature circuit breaker mcb , earth plate copper , earth plate , earth electrode copper , mccb , elcb , rccb , fuse hrc type , fuse glass type , fuse rewire type , rheostat sliding type 0 to 25 2a , rheostat sliding type 0 to 300 2a , rheostat sliding type 0 to 1 10a , rheostat sliding type 0 to 10 5a , capacitor electrolytic type , capacitor ceramic type , capacitor polyester film type , capacitor variable type , capacitor dual run type , lamp halogen incandescent type , lamp fluorescent tube type , hp lamp mercury vapour , hp lamp sodium vapour , lp lamp sodium vapour , lamp led , plug socket piano switch lamp holder , cables , bus bar brackets , rubber mat thick , electrician helmet , rcc pole accessories lt line , safety belt , ohm meter series type , ohm meter shunt type , digital multimeter , voltmeter multirange , milli voltmeter centre zero , ammeter mc ma portable lab type , ammeter mc portable lab type 0 to 5 a , ammeter mc portable lab type 0 to 25 a , ammeter mi portable lab type 0 to 1 a , ammeter mi portable lab type 0 to 5 a , ammeter mi portable lab type 0 to 25 a , kw meter analog , digital wattmeter , energy meter single phase , energy meter three phase , three phase power factor meter digital , frequency meter , magnetic flux meter , lux meter , tachometer analog , digital tachometer photo sensor , tong tester clamp meter digital , megger , 3 point starter , 4 point starter , wheatstone bridge galvanometer battery , single phase variable auto transformer , phase sequence indicator , growler , resistance type starter , direct on line dol starter , star delta starter manual , star delta starter semi automatic , star delta starter fully automatic , soft starter 3 phase , auto transformer type starter , oscilloscope dual trace , function generator , soldering iron 25w , soldering iron 65w , soldering iron 120w , temperature controlled soldering iron , discrete component trainer , linear ic trainer , digital ic trainer , electric hot plate induction type , electric kettle , electric iron , immersion heater , ceiling and table fan , geyser storage type , mixer and grinder , washing machine , motor pump set 1 hp , oil testing kit , inverter input output battery , voltage stabilizer input output , power supply , battery charger , current transformer , potential transformer , solar panel battery , computer system , laser printer , manual motor coil winding machine step arbor , ceiling fan coil winding machine , primary current injection set , smart meter single phase , smart meter three phase , ev charger 3 phase , ev charger home single phase , working bench , wiring board projection , instructors table , instructors chair , metal rack , lockers drawers , almirah , black board white board , fire extinguisher , fire buckets , turnkey execution of electrician lab setup measuring steel tape- specification not available, combination plier insulated 200 mm- specification not available, screw driver 4150 mm diamond head- specification not available, screw driver insulated 6150 mm- specification not available, electrician screw driver - specification not available, heavy duty screw driver insulated- specification not available, electrician screw driver- specification not available, punch centre- specification not available, knife double bladed electrician - specification not available, neon tester 500 volt- specification not available, steel rule 300 mm (metric & english)- specification not available, hammer cross peen 250 gm- specification not available, hammer ball peen 500 //bid details 2 / 130 gm- specification not available, pincer 150 mm- specification not available, clamp 'c' 100 mm- specification not available, clamp 'c' 200 mm- specification not available, spanner 150 mm adjustable drop forged ss- specification not available, spanner 300 mm adjustable drop forged ss- specification not avail

CTN :42579205

03 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of schedule iv (x-ray films, chemicals, e. c. g. rolls, materiels etc.) - schedule iv (x-ray films, chemicals, e. c. g. rolls, materiels etc.), polyster base round corner x-ray films (8" x 10") green sensitive, blue base with base fog less than or equal to 0.23 & dmax not less than 3.10 interleaved. the density values should be met at developer temperature 32 c to 35 c, polyster base round corner x-ray films (10" x 12") green sensitive, blue base with base fog less than or equal to 0.23 & dmax not less than 3.10 interleaved. the density values should be met at developer temperature 32 c to 35 c, polyster base round corner x-ray films (12" x 15") green sensitive, blue base with base fog less than or equal to 0.23 & dmax not less than 3.10 interleaved. the density values should be met at developer temperature 32 c to 35 c, dental x-ray films intraoral periapcal the density values should blue base with base fog less than or equal to 0.20 & dmax not less than 3.10 the density values should be met at developer temperature 32 c to 35 c, liquid developer replenisher for automatic processor (starter solution, if recommended by the manufacturer, should also be supplied), ( price of item no. 5 and item no. 6 will be considered as a unit), liquid fixer hardner for automatic processor ( price of item no. 5 and item no. 6 will be considered as a unit), inj. meglumine diatrizoate sodium diatrizoate iodine content 365-375 mg/ml in 20 ml. ampoule/vial, pigtail angiography catheter with multiple side holes length 65 to 75 cm 5f, inj. gadolinium based contrast for mri for liver/liver specific (should provide details of compound being hepatobiliary specific), inj. gadolinium based contrast for mri for general use, inj. gadolinium based contrast for mri for angiography, disp lure lock syringes 3 ml. for glue injection, disp lure lock syringes 1 ml. for glue injection, x-ray folders laminated 250 gsm 14 1/2" x 17 ", dual pack 200 ml syringe with aspirator, "y" shaped coiled tube y-tube sterile, non-pyrogenic (minimum 300 psi & above) compatible with dual head pressure injector ( lf/medrad/ sea crown / spectra / apollo), extension "y" shaped coiled tubing for injector 150 cms. (-5 or +15cm) low pressure (minimum 300 psi & above), dual disposable syringes (60 to 65 ml each) with "y" or "t"shaped coiled tube connecting tubes small spike for contrast and large spike for saline compatible with mri injector (lf or medrad)., one way stopcock (high pressure), low pressure extension "y" or "t" shaped coiled tubing min. 150cms (-5 or +15 cms) with coiled connecting tubes & small spike for contrast & large spike for saline for medical mri injector., flavoured, ionic, water soluble, oral contrast iodine content 240-250 mg/ ml. in 30 ml, bernstein catheter 4 f 100 cm, bernstein catheter 5 f 100 cm, chiba needle 21 g 15 cms length, chiba needle 22 g 15 cms length, disposable c t scan pressure injector syringes (190 ml syringe + quick fill tube) for bayer medrad salient injector (toshiba / canon), extension "y" shaped coild tube adapter dual check valves (minimum psi 300 & above), nonionic iodixanol isoosmolar, 320 mg 50 ml, disposable mri syringes kit for 65/115 mr injector system 65 ml contrast syringes and 115 ml ns syringes with connecting tubing combo pack for spectris solaris medrad pressure injector, spring loaded fully automatic and semi automatic biopsy instrument with adjustable penetration depth of 18 mm and 25 mm. having trocar tip with dimpling on needle and fire ready indicator. 14 g & 10 cm in length, spring loaded fully automatic and semi automatic biopsy instrument with adjustable penetration depth of 18 mm and 25 mm. having trocar tip with dimpling on needle and fire ready indicator. 16 g & 10 cm in length, coil shape breast tissue marker with both front trigger & an alternate rear trigger, should be visible in ultrasound, mammography and mri, extension coiled tube with integr

Central Government/Public Sector

CTN :45022211

15 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : supply installation and commissioning of transformer online bushing monitors system transformer online temperature monitors system and rubber membrane aircel rupture as per annexure a

Central Government / Public Sector

CTN :45103709

28 May, 2026 NA

Mancheshwar - Odisha

Tender For corrigendum : supply of valve regulated lead acid batteries for train lighting application of 110v dc system of capacity 6v/120ah at 27 degree centrigrade temperature in ppcp/abs container conforming to rdsos specification no. rdso/pe/spec/ac/0009-2014 (rev. 2) along with requisite numbers of connectors and nuts & bolts as per the above rdso specification. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45116910

01 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply and installation of iot based remote monitoring system for continuous measuring of 'x' and "y' displacement of atd and ambient temperature to facilitate preventive maintenance including sim card for data transfer. [ warranty period: 30 months after the date of delivery ]

Flame Photometer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector