Latest flammability tester Tenders | Government flammability tester Tenders

CTN :45318187

15 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of relacment method , compaction test equipment both 2.5 kg and 4.5 kg rammers , cbr moulds 150 mm dia -175 mm ht. , 150 mm x 300 mm ht. cylinder with capping component , riffle box , soaking tank for accommodating 6 cbr moulds , speedy moisture meter complete with chemicals , standard measures of 30, 15 and 3 litres capacity alongwith standard tamping rod , distant reading thermometer 0 degree c 250 degree c , sand pouring cylinder with conical funnel and tap and complete , gi seive set 125,90,75, 63,53,45,37.5, 14, 13.2,12.5,11.2,10,9.5,5.6,4.75mm , water still 20 ltr capacity , glass beakers borosilicate 4 nos of 100 cc, 200 cc, 500cc, 1000cc capacity , pentrometer with standard needles , platform balance 300 kg capacity , drying ovens. thermostatically controlled 100 degree c to 110 degree , water bath electrically operated and thermostatically controlled , dial gauge 25 mm travel -0.01 mm or division , aiv testing apparatus complete set , is sieve sets 450 mm internal dia with lid and pan 30 sieves in 1 set , sieves 450 mm internal dia of sieve sets as per bis of required sieve sizes , is brass sieve sets 200 mm internal dia with lid and pan 35 sieves in 1 set , sieves 200 mm consisting of sieve set of required sieve sizes with lid and pan , is sieve 75,53,45,22.4,11.22 6.5,9.50,5.6,4.75,2.36,1.18mm , soxhlet extraction or centrifuge type apparatus , oven electrically operated, thermostatically controlled including thermometer , sieve shaker capable of shaking 200 mm operated with time switch , weight machine 30 kg electronic type , high frequency mortar cube vibrator for cement testing , specific gravity apparatus , rapid moisture meter is 12175 1987 , flash and fire point apparatus , ductility testing apparatus electrically operated , density testing machine complete set bucket method , rebound hammer concrete testing hammer , furol viscometer , sand equivalent test apparatus , standard sand for density test , lab cbr testing equipment for conducting cbr testing 5 tonne cap , unconfined compression test appratus , marshal stability test machine , los-angeles abrasion test apparatus as per is2386 part4 1963 , accelerated curring tank having cap to accom 6 12 18 concr cube 150mm , big size oven electrically operated, thermostatically controlled , bitumen extractor, hand operated, bowl capacity 1500 gms bitumen, supplied , bitumen laboratory mixer including required accessories 20 ltrs , rebar locator , digital compression testing machine , automatic asphalt content meter self recording rain gauge, maximun minimum thermometer digital, screw gauge, prismatic compass with stand, auto/dumpy level with stand and staff, abney level, robotic total station 1 inch accuracy bluetooth auto target, kerosene or gas stove or electric hot plate, ghat tracer, pegging rod, optical square 90 degree, ranging rod 3 mtr long, high precision binacular, temperature gun for checking bituminous surface works, sample tray enamelled, vibrating wire, termperature sensor, portable indicator, steel tape 5m, standard pyconometer of 50 ml, digital hygrometer, post hole auger with extensions, rodo meter - high precision wheel odometer , hot plates 200 mm dia (1500 watt.) voltage 220v to 230v, circular plates of 250 mm dia, sampling pipettes fitted with pressure and suction inlets, 10 ml capacity., sampling tins with lids 100 mm dia x 75 mm ht 500 gms capacity , electronic digital micrometer, ennore standard sand (25 kgs bag ), weighing machine 0 kg to 10 kgs, mould (15cmx15cmx15cm) for compressive strength of concrete, digital vernier calipers (accuracy 0.001 mm), thermometers mercuryinglass //bid details 2 / 74

Central Government / Public Sector

CTN :45077996

08 Jun, 2026 NA

Vijayawada - Andhra Pradesh

Tender For analog dial indicator, range: 0 mm - 1 mm with least count : 0.001mm as per product code no. 2109a/ 2109ab of m/s. mitutoyo make or its equivalent in m/s. starrett/ insize makes as per technical specifications mentioned below. 1) measuring force : 1.5n or less. 2) accuracy : +/- 0.005mm. 3) contact point : carbide tipped. 4) jeweled bearing type : yes. 5) unique shock-proof mechanism, oil/ water resistant(o-ring sealed) type : yes. 6) provided with flat back or lug back for mounting purposes note: (1) one sample should be got approved before effecting bulk supply. (2)firm shall quote for any one make mentioned in the tendered description along with valid authorization. if vendor offers/bids for more than one make or if the firm mentions, 'as per tender' in their bid(s), their offer will be summarily rejected. (3) item to be supplied along with valid calibration test certificate of 01 year validity period from nabl accredited /govt. labs. (4) warranty certificate shall be submitted along with the material in the name of sse/m7/els/bza [ warranty period: 12 months after the date of delivery ]

CTN :45063879

30 May, 2026 NA

Khorda - Odisha

Tender For corrigendum : supply of inserts -vpgx220608pder-e10h25, make-seco , inserts -x0mx10t304tr-me07,f40m, make-seco , inserts - x0mx10t308tr-me07,f40m, make-seco , inserts - xnex080608tr-me09,f40m, make-seco , inserts - xpkx12t304pder-e08,h25, make-seco , absolute coolant proof digital caliper 0-150, 500-712-20, make-mitutoyo , absolute coolant proof digital caliper 0-300, 500-714-20, make-mitutoyo , general vernier caliper 0-130, 532-010, make-mitutoyo , dial test indicator 513-404-10e, make- mitutoyo , dial test indicator 513-415-10e, make-mitutoyo , dial test indicator 513-405-10e, make-mitutoyo , centering holer-901959, make-mitutoyo , magnetic stend 7032-10, make-mitutoyo , contact point 103006, make-mitutoyo , contact point 136013, make-mitutoyo , contact point 190653, make-mitutoyo , contact point 137558, make- mitutoyo , contact point 21cza201, make-mitutoyo , outside micrometer digital 0-30mm, make-tesa , outside micrometer digital 25-50mm, make-tesa , outside micrometer digital 50- 75mm, make-tesa , outside micrometer digital 100-125mm, make-tesa , digital vernier caliper - carbide tip, 0-150mm, make-tesa , digital vernier caliper - carbide tip, 0-300mm, make-tesa , micro-hite 350 digital hight gauge 0-350mm 0- 14inch, item no-00730073, make- tesa , outside micrometer mechanical-manual, 125-150mm make-mitutoyo , outside micrometer mechanical-manual, 150-175mm make- mitutoyo , inside 3 pin micrometer 6-12mm, make-mitutoyo , inside 3 pin micrometer 12-20mm, make-mitutoyo , inside 3 pin micrometer 20-25mm make-mitutoyo , inside 3 pin micrometer 25-30mm make-mitutoyo , inside 3 pin micrometer 35-40mm make-mitutoyo , inside 3 pin micrometer 40-50mm make-mitutoyo , inside 3 pin micrometer 50-60mm make-mitutoyo , inside 3 pin micrometer 60-70mm make-mitutoyo , flange micrometer 0- 25mm, make-mitutoyo , flange micrometer 50-75mm, make- mitutoyo , dial test indicator model no-1003mahr 0.001mm, make-mahr -millimess , radial pole circular magnetic chuck id no-mag.nr150c, make-eclipse

CTN :45239900

01 Jun, 2026 NA

Sealdah - West Bengal

Tender For supply of dial test indicator (q3)

Co-operative

CTN :45096131

20 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of instrument spare and annual maintenance contract - circular charts:- i) cc-200 (fc-261)range 0-100, ii) 9/d/179/fc-241, range 0-600, iii) 9/d/147/s-8963, range 0-150, iv) 9/d/112/s-3452, range 0-30, disposable pen (red), temperature gauge dial size 6" (h guru) heavy duty with test certificate (mercury filed) :- i) range 0-150 c streight steam 6", ii) range- 0-150 c capillary type (3 meter) bulb length 10" copper/pvc, iii)range 0-300 c streight steam 6", iv) range 0-500 c streight steam 6", vacuum gauge dial size 6" range- 0-30 inch of hg/760 mm bottom feed connection 3/8" bsp, h guru heavy duty with test certificate., pressure gauge dial size 6" bottom feed connection size 3/8" or 1/2" bsp, h guru heavy duty with test certificate :- i) range 0-15 psi 01 kg/cm , ii) range 0-30 psi 02 kg/cm , iii) range 0-60 psi 04 kg/cm , iv) range 0-150 psi 10 kg/cm , v) range 0-300 psi 21 kg/cm , vi) range 0-1030 psi 42 kg/cm /70 kg/cm , pressure gauge, dial size 10" bottom feed connection size 1/2" bsp heavy duty with test certificate:- i) range 0-60 kg/cm h. guru with test certificate, ii) range 0-2 kg/cm2 h. guru with test certificate, pressure gauge for turbines heavy duty with test certificate:- i) 4" dial size side back connection %" bsp range 0-2 kg/cm , ii) 4" dial size side back connection %" bsp range 0-4 kg/cm , iii) 4" dial size side back connection %" bsp range 0-7 kg/cm , iv) 4" dial size side back connection %" bsp range 0-10 kg/cm , teflon coated compensating cable 2 core j type, compensating cable fg/ss 2-core k type, 4 digit digital temperature indicator j & k typ , thermocouple sensor heavy duty:- i. 12" x 8 mm j/k type, ii. 8" x 8 mm j/ k type, iii. 6" x 6 mm j/k type, oil pocket ss 12", 6 digit digital event counter, proximity switch (magnetic sensor) pnp-nc sensing 8 mm,voltage 5-35 vdc, max load 300 ma, on/off pneumatic control valve flange type size- 1" to operate at air pressure 60-80 psi suitable for 20 kg/cm line pressure, on/off solenoid valve for pneumatic valve:- a) air filter " line size female thread, b) air filter with air regulator size 4", digital temperature controller (pid) j & k type, digital tachometer range 0-10000 rpm, 96 x 96 with magnetic sensor., steam flow indicator cum totalizer, drum level controller 4-20 ma input/output model no. 5296at (massibus make), dp transmitter 4-20 ma for boiler drum level, honybell make, positioner for drum level control valve, stroke counter for molasses tank, jumbo digital display with sensor, for juice and water tank, current and previous display size 4" x 4"., ma & mv source meter for temp. indicator calibration, pressure transmiter model tsc 01, range 0 to 40 bar, output 04-20 ma, accuracy 0.25% fs, pressure transmiter model ks-e-e-e b02u-m-v, range 0 to 2 bar, output 04-20 ma, supply 9-32 vdc, port g1/4e, syphon pipe s.s. 304 :- (i) u type, (ii) q type, pressure gauge, model en837-1, ss-316, dail size 6", bottom feed connection size 1/2" bsp, heavy duty with test certificate (tempsens make) :- i) range 0-6 kg/cm , ii) range 0-10 kg/cm , iii) range 0-21 kg/cm , iv) range 0-42 kg/cm , pid controller, size 96 96, model no. dc 1040, make honey bell, pressure recorder range, h-guru make, with test certificate (heany duty) with pipe stand mounted ", socket- ", size 10" :- (i) 0-1 kg./cm2, (ii) 0-2 kg./cm2, (iii) 0-10 kg./cm2, orifice with assembly (nipple), inlet pressure 21 kg/cm , outlet pressure 21 kg/cm , inlet temp. 350 c, outlet temp. 350 c, line size 4", drum level transmitter, range 400 to 400 in h2o, (make- honey bell), steam pressure transmitter, range 14.7 to 3000 psi, (make- honey bell), hade mounted thermocouple, length 450 mm, k-type duplex type, with test certificate (heany duty), signal isolator singal input 4-20ma, double output 4-20ma, repair & calibration work with amc super-heated wash water temp. controlling system- 01 no., d-super heated exhaust steam temp. controlling system- 01 no., temperature control system of transit

CTN :45071882

21 May, 2026 NA

Medak - Telangana

Tender For corrigendum : supply of puppitast/pin dial test indicator- min, reading= 0.01mm, measue ing range= 0.8mm, dial= 27.5mm, exposed len

CTN :43605232

13 May, 2026 NA

Aurangabad-Mh - Maharashtra

Tender For bid to ras supply & installation of flammability tester as per is 9873 part-2 and iso 6941

Central Government/Public Sector

CTN :45002090

05 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of tilt vice, 150mm* 250mm , 20 dia end mill inserts suitable for ss (as per buyer specification) , dial test indicator with stand 0.01 acc (as per buyer specification)

CTN :43994952

07 May, 2026 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : invites for e-bids.from original equipment manufacturers (oems) and/or authorised channel partners (cps)supply of goods, tools & equipment foran international standard itot in fitter tradeat iti tarsali, gujarat, india - ss and sc center lathe (all geared), design, supply, installation, commissioning, testing and training of hydraulic / electro-hydraulic/ analysis and control of hydraulics., design, supply, installation, commissioning, testing and training of pneumatic / electro-pneumatic/ analysis and control of pneumatic., design, supply, installation, commissioning, testing and training of advance factory automation training kits, application learning systems, hydraulic power saw machine, cnc turn centre, universal milling machine with minimum specification, vertical milling machine, cnc machining centre, cnc milling tools to suit above machine (sl. no. 187): to accommodate face cutter, shell end mill cutter, taper shank and parallel shank drills/cutters, reamers. taps with suitable tool holders., surface grinding machine, universal tool and cutter grinding machine, interchangeable ratchet socket set, hand reamer adjustable cover, hand reamer taper, reamer parallel, set combination, micrometer (0-25), micrometer (25-50), micrometer (50-75), micrometer inside (0-25), vernier calliper (150mm), vernier height gauges, vernier bevel protractor, drill twist taper shank, drill chuck, wheel dresser, machine vice (4 inch), machine vice (6 inch), sleeve drill morse, bench vice, leg vice, dial test indicator, lathe tools hss tipped set, lathe tools bit hss, counter boring and counter sinking tool, arm strong type bit holder rh, arm strong type bit holder lh, arm strong type bit holder straight, straight edge, surface plate, marking table, universal scribing block, v- block pair, square adjustable, angle plate, spirit level, portable hand drill (electric), ss and sc center lathe (all geared), design, supply, installation, commissioning, testing and training of hydraulic / electro-hydraulic/ analysis and control of hydraulics., design, supply, installation, commissioning, testing and training of pneumatic / electro-pneumatic/ analysis and control of pneumatic., design, supply, installation, commissioning, testing and training of advance factory automation training kits, application learning systems, hydraulic power saw machine, cnc turn centre, universal milling machine with minimum specification, vertical milling machine, cnc machining centre, cnc milling tools to suit above machine (sl. no. 187): to accommodate face cutter, shell end mill cutter, taper shank and parallel shank drills/cutters, reamers. taps with suitable tool holders., surface grinding machine, universal tool and cutter grinding machine, interchangeable ratchet socket set, hand reamer adjustable cover, hand reamer taper, reamer parallel, set combination, micrometer (0-25), micrometer (25-50), micrometer (50-75), micrometer inside (0-25), vernier calliper (150mm), vernier height gauges, vernier bevel protractor, drill twist taper shank, drill chuck, wheel dresser, machine vice (4 inch), machine vice (6 inch), sleeve drill morse, bench vice, leg vice, dial test indicator, lathe tools hss tipped set, lathe tools bit hss, counter boring and counter sinking tool, arm strong type bit holder rh, arm strong type bit holder lh, arm strong type bit holder straight, straight edge, surface plate, marking table, universal scribing block, v- block pair, square adjustable, angle plate, spirit level, portable hand drill (electric)

CTN :41540491

27 Apr, 2026 NA

Ernakulam - Kerala

Tender For bid to ras corrigendum : supply of multi product calibrator ( 61/2 digit) (pt no 5560a) , insulation tester 500v (pt no-5g/203) , dc power supply (pt no-10k/9331293na) , hand held multi meter 4.5 (pt no-hp3468a) , temperature and humidity indicator (pt no-5a/3820 na) , stand universal (pt no-63b/412 na) , dti stang magnetic (pt no-1b/5168 na) , dial indicator test(pt no-1b/5150 na) , slip gauge (metric) (pt no-63b/62 na) , level spirit adjustable(0-150) (pt no-1b/4235 na) , mirror inspection jointed (pt no- cf143 a) , caliper micrometer inside(2-12" ) ( pt no-1a/2733na) , micrometer outside (0-150mm) (pt no-1a/2732 na) , micrometer inside (caliper type) (pt no-1a/2721 na) , surface plate 36" x48" (pt no-1b/4173 na) , vernier depth gauge (0-200mm) (pt no-1a/3906 na) , cylinder bore gauge (6-10mm) (pt no-1b/4561-5 na) , filler gauge taper mm (pt no-1b/4600 na) , micrometer outside (pt no-1a/9100073 na) , hand magnifying glass (pt no-1b/niv/mg) , clinometer (pt no-1a/4046 na) , combination set (pt no-1b/1816 na) , electronic torque wrench tester (pt no-6c/0101 na) , engineering tool (pt no-1l/0001 na) , quick vice 5" (pt no-1c/2607-1c9506589-na) , tensiometer calibrator (pt no-63b/103 na) , weighing machine (pt no-6c/3849na) , weight 100gm-50 kg (25 in no. ) (pt no-63b/0014 na) , spring balance 1-10 kg (pt no- 1h/niv/sp) , gauge screw thread (pt no-1b/4048 na)

Flammability Tester Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Co-operative

Central Government/Public Sector