Latest flange coupling Tenders | Government flange coupling Tenders

State Government

CTN :45523590

23 Jun, 2026 10.75 Lacs

Hoshangabad - Madhya Pradesh

Tender For pre-mansoon oiling/greasing compounding work, repair of damaged floating shaft flange coupling, repair and painting of wlkway and railing and installation of barrier at parasdoh medium irrigation project under wrd division multai district betul

State Government

CTN :45537612

23 Jun, 2026 9.90 Lacs

Banswara - Rajasthan

Tender For supply of handpump spare parts at ps bagidora - silenderbody chain with coupling reducercap ekskal (stil) bearing 6204 ledarwashar haxabled pedestal greece 1 kilo planjarod planjar yakbody (gm) apargayd plate rodsoket rabd sheet badi rabd sheet chhoti silingaring ji.i. pype 32mm 3 meter pypewice 1 ((unisef typ) rodwais unicef pypalifter 32mm spaner 24" (pyp rich) spaner 12" (pyp rinch) spaner 17 * 19 fiks spaner 17 * 19 ring rounnddai 12.5mm -diehandal hemar 1 kilo chheni 3 pype die - rodelifter(gm) checkwalvgayd (gm) checkwalvasit (gm) plower (gm) checkwalvaritornasit (gm) handal had kanectingrod watertenk brashaliner spacer

CTN :45545124

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply of gi nipple 25 mm x 150 mm isi marked , mortice lock 65mm 4 lever ss , cp brass waste coupling 40 mm , gi tee 25 mm isi marked , gi nipple 20 mm x 75 mm isi marked , gi socket 25 mm isi marked , gi union 20 mm isi marked , piano type hings ss 6 feet , rotational three layered , white colour moulded polythy water storage tank 500 ltr rectangular shape. , gi nipple 20 mm x 150 mm , m seal , hdpe water tank cover for 1000 ltr cap , threaded or hinges type , stainless steel grating round 5 inch without hole , wash basin white 550mm x 400 mm , rotational three layered , white colour moulded polythylen water storage tank 1000 ltr , european type ewc s type and p trap , stainless steel butt hinges size 125 mm , plate rack s s size 31 inch x36 inch x10 inch and thickness of 0.65 mm , galvanised ss wire cloth 0.56mm 3 feet or 4 feet wide and 15 mtr long , gi nipple 15 mm x 100 mm , cp grating round jali 125 mm with hole , gi nipple 15 mm x 150 mm , gi nipple 20 mm x 100 mm , gi nipple 20 mm x 125 mm , hydraulic door closer universal type , ms end plug 15 mm , cp waste coupling 40 mm , cp grating jali round 140 mm , sliding door bolt alumn 250 mm , gi nipple 20 mm x 50 mm isi marked , gi socket 20 mm isi marked isi marked , gi tee 20 mm isi marked , swr pipe type a length 06 feet 75 mm dia , upvc type , cp bib cock 15 mm long body , gi nipple 15 mm x 50 mm isi marked , sliding door bolt s s 250 mm , stainless steel grating round 4 inch with hole , tower bolt s s 150 mm , cp towel rail 600 mm , sliding door bolt alumn 300 mm , mirror cabinet 400mmx500mm with screw and gitti , ss door handle 100 mm , door handle 200 mm aluminium , gi nipple 15 mm x 125 mm , glass sheet plane size 1200x900x4mm , ss shower rose 15 mm, 125 mm square , cp brass waste coupling 32 mm , teflon tape 19 mm , corrugated waste pipe 40mm x 900 mm , gi union 15 mm isi marked , stainless steel butt hinges size 75 mm , gi nipple 15 mm x 75 mm isi marked , swr pipe type a length 06 feet 110 mm dia , upvc type , cp brass towel ring , gi elbow 20 mm , hasp and staple almn anodised 75 mm , sliding door bolt s s 300 mm , hdpe water tank cover for 500 ltr cap, threaded or hinges type , tower bolt s s 125 mm , white cement in 01 kgs pack , cp brass towel rail , 600 mm length , 25 mm dia and 3 mm thick , glass shelf 500mmx 125mm with brass bracket, screw and gitti , cp grating jali round 125 mm , stainless steel butt hinges size 100 mm , cp brass soap disc , gi socket 15 mm isi marked , cp brass toilet paper holder , door stopper 50 mm ss , rubber door seal for door bottom 50x90cm , cp brass 15 mm angel cock , teflon tape 12 mm , pvc internal fitting for low level cistern , dual action with push buttons , cp waste coupling 32 mm , gi tee 15 mm isi marked , gi elbow 15 mm isi marked , cp bib cock 15 mm short body , gi pipe medium grade 20 mm with socket , flushing cistern 10 ltrs capacity , gi pipe medium grade 15 mm with socket , pvc connection with nut and washer 15mmx 450mm , looking mirror 600x450x4mm beveled edge , with 4 plugs, screw and gitti , m s helical door spring 150mm , bracket for curtain rod , ss with screw and gitti , readymade bituminious path hole patching , door stopper 50 mm aluminium , curtain rod 25mm dia ss 3 mm thick , spindle brass for 15 mm bib cock , toilet seat cover off white , cp brass health faucet hand shower with 1.5 mtr flexible tube and hook , knob 25mm , ss with nut and screw , pvc connection with nut and washer 15mmx 600mm , glazed oil putty , ply wood 8 feet x4 feet x04 mm teak face , cushion size 21 inch x22 inch x4 inch 40 density and with removable chain cover

CTN :45201036

16 Jun, 2026 20.00 Lacs

Chhatarpur - Madhya Pradesh

Tender For corrigendum : supply of handpump material 2026.27 - supply of handpump material 2026-27, head assembly complete 48 kg isi, head assembly complete heavy, ball wearing, chain with coupling for alltypes of pumps, handel without wearing chain excel, handel excel, water tank assembly, stand assembly, birth plate 2 kg, gi main rising pipe 32 mm medium class b, gi socket, connecting rod for all types of pumps 3 m, rod socket 12 mm, cylinder assembly complete isi, cylinder body, plunger rod for cylinder, upper valve assembly complete heavy, lower valve assembly complete heavy, rubber seating for upper valve heavy, rubber seating for lower valve heavy, plunger yoke plunger yoke body, upper valve gide, follower, check valve seat, check valve gide, spacer for ceiling, lather washer, rubber washer, ceiling ring of ceiling, spacer of lather washer, spacer for excel, front cover, reducer cap painted, nut bolt 19 no., chain nut bolt tvs 17 no., bolt for cover, pain filter for 32 mm, pipe wank 2 no. heera company, pipe wank 3 no. heera compay, hand pump rod dry set, pipe dry set 32 mm, 40 mm, 50mm, pvc rising pipe 32 mm, ci adopter for hand pump, pipe ranch 18 inch, pipe ranch 12 inch, pipe ranch 24 inch, rinch panna 14x15, rinch panna 15x16, rinch panna 17x18, rinch panna 19x22, patti panna 14x15, patti panna 16x17, patti panna 18x19, patti panna 20x20, patti panna 7/16x 9/16, patti panna 19x22, torch 4 sell, extension pipe complete 1, extension pipe complete 1.5

CTN :45532259

21 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply of mechanical and electrical equipments - supply - mechanical lab equipments, single phase ac circuit kit for voltage, current and power measurement- 5a,300v, 300w/5a measurement of power by using various loads analog voltmeter 0-300v ac panel mountedanalog ammeter 0-5a ac panel mountedanalog wattmeter 1.5kw ac panel mountedsingle phase digital power monitor to measure powersingle phase ac lamp load 230v/5a 1kwpanel enclosure with hylam front panel with input/outputterminal outlets , mcb elcb trainer kit- 1 phase/3 phase, 2/3/4 pole, 3a-16a single pole mcb 2-5ampstwo pole elcb 30malamp load single phase 5amps panel enclosure and terminal outlets, four stroke petrol engine cut section model - single cylinder four stroke petrol engine cut sectional model with carburetor, spark plug, cut cylinder, piston, connecting rod, crank shaft, valve mechanism, cam shaft, timing gears and flywheel. all parts cut opened to study the components and its working provision to take values for valve timing. surface finish: painted and color coded for easy identification of components mounting: heavy-duty ms fabricated stand/base display type: static / dynamic demonstrationmodel, dc motor - type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armaturefeatures: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder - bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, bearing with shaft assembly - type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end coversmounting: bench-mounted / frame-mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit- the plummer block housing material: cast iron (grade fg 200 or equivalent).type: sng or snl series (split-type housing).sealing: felt seals or v-ring seals (to demonstrate lubrication retention).lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearingtype: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series).bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: groundcarbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., (a).sliding mesh gear box for dismantling and assembling - (a) max transmitted power 1to1.5hp, torque capacity- 40 to 200nm, number .of speed 3 to 6, gear module 1.5 to 2, sliding mesh gearbox gearbox type- sliding mesh forward gears- 3reverse -yes gear material -alloy steel lubrication- splash / oil gear teeth- spur typical gear ratios- 3.2:1 / 2.0:1 /1.3:1 input speed- 0 1800 rpm housing material- cast iron(b) constant mesh gear box cut section - constant mesh gearbox (cut section) gearbox type :constant mesh forward gears :4 gear teeth -helical / spur dog clutch type- sliding lubrication -oil sae 80w90 housing- cut section material -hardened alloy steeleducational features-labeled parts., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

CTN :45561161

16 Jul, 2026 NA

Halisahar - West Bengal

Tender For supply of flange coupling set as per rdso's spec. no. 04-abr-2019 rev.-02 of december 2019 consisting of 09 items as per annexure. for gurantee/ warranty condition: specification should be followed. [ warranty period: 30 months after the date of delivery ] ]

CTN :45541210

29 Jun, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply of sugar godown general items - supply of sugar godown general items, 10x65mm m.s bolt & nut, 10x30mm m.s bolt & nut, 6x40mm brass bolt & nut, f- 40 tyre coupling set, f- 60 tyre coupling set, 3 air pump foot valve, 595 mm length x 72 mm depth m.s slat as per our sample, wooden piece 595 mm x 70 mm as per our sample, 3/4 pitch chain link slat holes 13 mm x 15 mm as per our sample, plummer block bearing 208, 35mm l m.s angle

CTN :45543646

23 Jun, 2026 50.47 Lacs

Purnia - Bihar

Tender For supply of , frl 1 or 4 inch with pressure guage , quick exhaust valve 1 or 4 festo or norgen , quick exhaust valve 1 or 8 festo or norgen , spray,wd-40 cap- 400ml btl , cassette ss as per kosan carousel , guide rod for kosan introduction unit , 5 or 2 spring return valve , 1 or 2inch -f, ss ball valve , magnetic sensor , tepar strip for 90 deg bend , lock pin,chain conveyor duplex chain , switch,139a714,carousel kosncris - pressure switch , ejection puller arm , ejection pusher arm , needle valve , pneumatic cylinder 12mm or 16mm with fittings , shaft size- 40mm x 280 mm en-8 , shaft size- 40mm x 4000 mm en-8 , nut bolt 1.5inch x 10mm , nut bolt 1inch x10mm , f-mounting , ejection flexible coupling , pneumatic cylinder- 50 or 160- norgen or smc , toggle joint rod- lt-200 mm , pin of non-pneumatic filling gun , bearing no.6206 , bearing no.6304 , gas stop valve lpg 1 or 2inch , steel plate thick 10mm size 0.5mx0.5m , key pad for cuc card steel mk1v , key pad for cuc card mkii , anchor fastener length150mm dia 10mm gi , anchor fastener length150mm dia 12mm gi , anchor fastener length150mm dia 16mm gi , nut bolt length 1inch dia 6 mm , counter bolt 8mm, allenkey type, with lock nut , eye bolt for centering arm , spring,159a533,kosncris pt head , ss rod of gd or pt base , ss block of gd or pt base , linear bearing , optical cable for bar code sensor , automatic hot air sealing head , pneumatic cylinder size 500mmx50 norgan , 50 dia sealkit norgren , 50 dia sealkit janatics , solenoid coil for kosan filling scale- smc make , lpg hose of length 1 m , lpg hose of length 1.5 m , lpg hose of length 0.5 m , pencil sensor , rivet type conveyor chain , rod of kosan filling gun pneumatic type , kosan filling gun cup , dampner or kosan filling gun bush , kosan filling scale leg , lower bell for gd , vibration absorber for gd head , kosan fintec load cell for filling scale 200kg , load cell for jisl adjustment scale 650 kg , manual cvt head,kpot0122 carousel,kosncr , lifter plate for check scale , c channel of conveyor , telescopic boom pipe length 6m dia 1.5inch , drag chain , boom e plate with taflon ss thickness-10mm 1mx1m with taflon 12mm , mark iv display , reflector for kosan carousel , lpg filling gun pneumatic type , pneumatic counter , vacuum or suction indicator

CTN :45384476

17 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For corrigendum : purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45512556

22 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For electromagentic switch , hand pump , ac compressor , receiver , hvzc hose , hose , flange coupling , element primary , hp hose

Flange Coupling Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government