Latest flange joint Tenders | Government flange joint Tenders

Central Government/Public Sector

CTN :45730208

08 Jul, 2026 NA

Bhusawal - Maharashtra

Tender For supply of flange jointing for btpn tanks to rdso drg.no.- wd-86081-s-66, item no.11, alt. no.14 or latest [ warranty period: 30 months after the date of delivery ] ]

CTN :45640250

09 Jul, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : 3" , lap flange joint, 150# , sch-10s, ss316l , 3/4" x1/2" swage. conc rdcr sch. s160xs160

State Government

CTN :45678034

14 Jul, 2026 28.50 Lacs

Jummu - Jammu And Kashmir

Tender For providing, installation, testing and commissioning of electro-mechanical equipments at newly drilled t/well peerkho. - providing of 3 nos. submersible pump sets :- the job involves providing of 3 nos. submersible pump sets of specification 15000 gph x 80 m head of reputed make (one no. operational and two nos. standby) along with allied accessories to be installed in 10/12 inch dia. deep drilled new tube well peer kho. the job includes fabrication, providing and fitting of 2 no. clamps of span as per the required length to be fabricated and fitted with submersible pump sets with the help of heavy duty bolts and nuts (01 no. clamp to each pump set). the job also includes fabrication of 2 no. graded expander/ reducer for nrv of required size to be fabricated out of suitable thickness ms pipe threaded at one end and flanged at the other end. fitting of reducers/ expanders with 125 mm dia. column pipes at one end with flanged joint and with the discharge outlet of the submersible pumps at the other end.column pipes :- fabrication and providing of 125 mm dia. b class ms 20 nos. column pipes flanged on both ends. the length of each pipe shall be 3 mtrs. and shall be completely leak proof. the ms pipe shall be confirming to relevant isi specifications. the heavy duty flanges shall be furnished properly. one end of the flange shall be faced in such a way that a leak proof joint is made by providing and fitting a rubber sheet in between the two flanges and tightening it with nuts and bolts. each flange shall be provided with 6 no. equidistant holes of required dia. the job also includes welding of flat iron strips at each end for giving extra strength to the flanged joint and providing of 2 no. grooves on each flange on opposite sides for submersible cable to be accommodated though it. the welding of heavy duty flanges with the pipe should be carried out with superior quality pipe welding electrodes. then painting all the pipes with a coat of anti corrosive paint and two coats of super enamel paint. ms well cap, washout and riser pipe :- fabrication and fitting of ms well cap as per casing dia. of 8 mm thickness with one hole of approx 125 mm dia. in the centre and with holes/ cuts at an appropriate distance for passing submersible cable. providing and fitting of an arrangement for gi fitting near the discharge head outlet to provide water feeding to the gravel around the tube well casing. laying of delivery line for making of inter connections of top column pipe of new tube well by way of fabricating 900 ms bend out of 125 mm dia. ms pipe, welding of 2 no flanges one at each end. fabrication and fitting of 125 mm dia. ms pipe connection piece long as per site requirement with 90 degree bend with the help of nuts, bolts, washers, rubber sheet in between for leak proof joint. fitting of 1 no. 125 mm dia. heavy duty c.s. sluice valve through a connection piece as per site condition. fabrication, providing and fitting of 1 mm dia. heavy duty cast steel reflux valve. the sluice and reflux valve shall be confirming the isi standards and shall be of reputed make. fabrication and fitting of another 125 mm dia. connection piece flanged at both ends for working of washout by way of interconnecting delivery pipe through tee joint with the washout pipe.. fabrication and fitting of 1 no. blind flange at the end of washout. painting of exposed parts of the delivery line with two coats of anti rust primer and one coat of super enamel paint. the job also involves fabrication and fitting of one set of u-shaped clamps (for holding 125 mm dia. pipe) on the top column pipe for holding of column assembly on the casing and fabrication of 1 set of u- clamps to be used for extraction/ lowering of pump set along with column assembly. complete job includes cost of material, labour charges and carriage etc. and also making provision for wash out by providing and fitting of sluice valve of c.s of required capacity as per site conditions.lowering of submersible p

State Government

CTN :45671132

01 Jul, 2026 NA

Ranchi - Jharkhand

Tender For basic rate of materials for inclusion in the schedule of rates for government of jharkhand to be used in different civil construction / infrastructure works and repair works.- providing and supplying in standard lengths high density polyethylene pipe (hdpe pipe) note: the rates are f.o.r. at work site in jharkhand but exclusive of gst & c.p. (confirming to is 4984-4984/14151/12786/13488 (latest revision with necessary jointing materials like mechanical connector i.e. thread/insert joint/quick release coupler joint/compression fitting joint or flanged joints excluding coupler/specials and taxes), hdpe pipe of materials grade pe100-pn06 (dia in mm), 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, 355 mm dia, 400 mm dia, 450 mm dia, 500 mm dia, hdpe pipe of materials grade pe100-pn10 (dia in mm), 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, 355 mm dia, 400 mm dia, 450 mm dia, 500 mm dia, medium density polyethylene pipe (mdpe pipe) in standard length with necessary jointing materials like mechanical connector i.e., thread / insert joint / quick release coupler joint / compression fitting joint or flanged joints. note: the rates are f.o.r. at work site in jharkhand but exclusive of gst & c.p. (conforming to iso 4427:1996)., mdpe pipe of materials grade pe 80, pn16, 20 mm dia, 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, mdpe pipe of materials grade pe 80, pn12.5, 20 mm dia, 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, mdpe pipe of materials grade pe 80, pn10, 20 mm dia, 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, mdpe pipe of materials grade pe 80, pn8, 20 mm dia, 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, mdpe pipe of materials grade pe 80, pn6, 20 mm dia, 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, manufacturing, providing and supplying spirally welded/ erw/ saw / fabricated m. s. pipes (commercial quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes welding on automatic welding machine and forming ‘v’ edge on both ends of pipes in all respect, etc. complete (no negative tolerance in thickness is permissible). note: the rates are f.o.r. at work site in jharkhand but exclusive of gst & c.p. (conforming to is: 3589 and is: 5504), dia of pipe: 100 mm (i.d.), thickness of pipe:, 6mm thick, 8mm thick, 10mm thick, dia of pipe: 200 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 250 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 300 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 350 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 400 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 450 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 500 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 550 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 600 mm (i.d.), thickness of pipe:, 6 mm, 8

Central Government/Public Sector

CTN :45646693

13 Jul, 2026 41.00 Lacs

Bhuj - Gujarat

Tender For certain repairs to water supply distribution lines and other connected items at zone c at mil stn bhuj and gandhidham under ge(a) bhuj - taking up u/s ac/gi/di/upvc water main (incl all fitting) with spigot & socket /ms pipe or any other type of pipe or lead joint incl burning out joint & recovering lead from pipe of 200 mm bore for laying /rerouting of serviceable pipe after cleaning complete all as specified and directed., all as per item 1 above but 150 mm dia bore complete all as specified and directed., all as per item 1 above but 100 mm dia bore complete all as specified and directed., all as per item 1 above but 80 mm dia bore complete all as specified and directed., all as per item 1 above but 50 mm dia bore complete all as specified and directed., material and labour di pipes of size 200 mm bore with spigot and socket end centrifugally cast class "k- 7" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position complete all as specified and directed., material and labour di pipes of size 150 mm bore with spigot and socket end centrifugally cast class "k- 7" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position complete all as specified and directed. note: di fitting /lead joint / tyton joint will be measured and paid seperately all the dismanted / demolished /taking down material shall be reused or removed from site., all as per item 7 above but 100 mm dia bore complete all as specified and directed., supply and fixing in any length upvc pipe 150 mm dia pipe manufactured as per astm-d-1785 as per is-559, schedule-40 complete with fittings, laid in trenches in required length complete all as specified and directed., all as per item 9 above but 100 mm dia bore complete all as specified and directed., all as per item 9 above but 80 mm dia bore complete all as specified and directed., all as per item 9 above but 50 mm dia bore complete all as specified and directed., m&l di bend any type radius and angle tapers any type straght bend increacing decreacing or double socket etc) tee pipe single branch y juction double branch cross(all socket and spiogat collars caps and plug for the pipe socket & spiogat of pipe size upto 200 mm dia complete all as specified and directed. ( lead /gasket for fitting shall be measured and paid separately), s & f in repair upvc ball valves with operating handle (stop valve) of size 50 mm dia complete suitable for fittings with astm - 1785, schedule 40 upvc pipes complete all as specified and directed., s & f in repair upvc ball valves with operating handle (stop valve) of size 80 mm dia complete suitable for fittings with astm - 1785, schedule 40 upvc pipes complete all as specified and directed., excavation in trenches in soft / loose soil nexc 1.5 mtr wide and not exc 1.5 m in depth etc complete and getting out in soft soil inciuding trimming sides and bottom of trenches complete all as specified and directed., rentring filling in trenches including watering and well ramming in layer not exc 25 cm thick in soft/ loose soil complete all as specified and directed., removing excavated surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed., hard standing cutting/road cutting for laying of pipe and making surface good with pcc 1:3:6 complete all as specified and directed., taking down carefully cast iron sluice valve of size 80 mm to 200 mm bore from ci water mains, complete with all acessories complete all as specified and directed., s&f in repair sluice valves flanged end, cast iron body, flanged and drilled and non rising type stainless steel spindle with nut, long body, class p n 1.6, conforing to is 14846 of 2000 for following sizes including all flange joint with rubber or fiber board, bolts, nuts and washers complete including pumping out accumulated water

Central Government/Public Sector

CTN :45616225

01 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of kit of gasket for air brake pipe flange joint to drg. no. wd-83062-s-07 alt.-3 or latest consisting of 2 items (i) gasket for 32 nb pipe, oty. 5 nos. & (ii) gasket for 20 nb pipe, qty. 7 nos., confirming to 02-abr-02 with latest rev. & latest amendment. [ warranty period:30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45577109

29 Jun, 2026 NA

Delhi - Delhi

Tender For supply of combined pressure reducing valve & double check valve (confirming to rdso drawing no.wd-15011- s-14, alt-4 or latest item no.23 note-combined pressure reducing valve and double check valve mounting on a single casing with provision for flange joint for pipe connections as shown in the above drawing need to be supplied). [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45529596

03 Jul, 2026 NA

Kalpakkam - Tamil Nadu

Tender For supply of supply of hp heater 5 as per enclosed technical specification , supply of hp heater 6 as per enclosed technical specification , supply of lp heater 3 as per enclosed technical specification , vent orifice plate for hp heater 5 as per enclosed technical specification , vent orifice plate for hp heater 6 as per enclosed technical specification , vent orifice plate for lp heater 3 as per enclosed technical specification , gasket man hole door for hp heater 5 as per enclosed technical specification , gasket man hole door for hp heater 6 as per enclosed technical specification , gasket for tube sheet to shell flange joint for lp heater 3 as per enclosed technical specification , gasket for channel cover for lp heater 3 as per enclosed technical specification , tube plugs for hp heater 5 as per enclosed technical specification , tube plugs for hp heater 6 as per enclosed technical specification , tube plugs for lp heater 3 as per enclosed technical specification

CTN :45543209

23 Jun, 2026 NA

Mumbai - Maharashtra

Tender For 3/4" x1/2" swage. conc rdcr sch. s160xs160 , 3" , lap flange joint, 150# , sch-10s, ss316l

corporations/Associations/Others

CTN :45532876

27 Jun, 2026 NA

Kolkata - West Bengal

Tender For renovation and replacement of damaged and worn out spare parts with new ones for sludge pump-1 with ancillary works at wtp-iv, garden reach water works.- manufacturing, supply & delivery of pump - shaft made off ss-316 for 647 cum/hr., 15 mtrs head sludge , pump with necessary keys etc, as per sample at garden reach water treatment plant., , manufacturing, supply & delivery of shaft -sleeve, , made of ss-316 for 647 cum/hr., 15 mtrs head sludge, , pump as per sample at garden reach water, , manufacturing, supply &delivery of casing ring made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufacturing, supply &delivery of split gland made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufactering, supply delivery of baaring housing made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufactering, supply delivery of lock nut of impeller made of ss for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufactering, supply & delivery of lock nut of bearing made of ss for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , balancing of rotating assembly of 647 cum/hr., 15 mtrs head sludge pump including loading, unloading and transportation from and to at garden reach water treatment plant, , total rotating assembly & keep it at a suotable place after opening the top cover of pump unit. dismantling the bearing housing at both end & as per direction of eic., , manufacturing, supply & delivery of impeller made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufacturing.. supply delivery of bearing housing cover (d.e side) made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufacturing, supply &delivery of bearing housing cover (n.d.e side) made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at tp-1, grww. garden reach water treatment plant, , manufacturing, supply &delivery of supporting foot made of nici for 647 m?/hr., 15 mt head sludge pump as per sample at garden reach water treatment plant., , m.s plate as per is: 2062-2011/latest revision, make: sailitataijindal (b) above 2 mm upto 10 mm thickness, , fabricating m.s. specials of different diameter in shop out of 8 mm to 12 mm thick m.s plates supplied depart-mentally, cutting the plates to exact size & shape by gas cutting device and/or by adopting any other approved type of mechanical means, bending the same in true curvature by template and rolling machine of approved design including proper marking, levelling joints followed by electric arc welding - longitudinal and circumferential, as necessary, using standard electrodes as per i.s.specification including edge preparation, electricity charges and hydraulic testing of the fabricatedpiece all complete as per specification and direction of the engineer-in-charge. [the engineer-in-charge shall approve the electrodes for are welding before use. fabrication of m.s. flange to form m.s flanged tail piece shall not be considered as m.s. special], , cutting to requisite length or shape departmental r.s. joists, channels, angles, tees, plates etc. (payment to be made on area of cut surface), , welding in m.s. structural work with gas or electric: (a) tack weld, , welding in m.s. structural work with gas or electric: (b) continuous weld., , supply of m.s. flange (slipper type) as per is-6392 table 17 thickness 12mm nb diameter in mm 350, , flange joint to c.i./d.i/ms. pipes and specials including supply of rubber gasket, nuts, bolts, washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the engineer-in-charge. di

Flange Joint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors