Latest flange welding Tenders | Government flange welding Tenders

CTN :45693762

13 Jul, 2026 57.77 Lacs

Bhiwani - Haryana

Tender For supply erection commissioning of electrical mechanical equipment for dewatering of flood water from field area for village badesra outfall at rd 70600l of jui feeder - supply, erection & commissioning of 5 c/s axial flow water lubricated vertical pumps of 5 cs. discharge at 1440 rpm at static head of approx 8.0 mtr. with y body, including ms bend including flange welding, nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department, supply, erection & commissioning of fully automatic star delta starter suitable for 30 hp motor as per ip 54 with all allied item like mccb, contactor, rating 120 amp 90 amp, 50 amp, all type of protection relays (over voltage, under voltage, over corrent, singhle phasing preventor, delay siwtch ) correction capacitor, digital meter, bus bar, thimble etc suitable and all live parts should be covered as per site demand and compartment coated with epoxy coating as per approved technical specification of department. (including cable suitable for panel to motor).

CTN :45693782

13 Jul, 2026 73.10 Lacs

Bhiwani - Haryana

Tender For supply ere commi of various electromechanical equipment like 5 no 5 cs vt pump electric motors starter panel and other allied material for flood protection works from the field area of village dang khurd outfall at rd 65000r of nigana feeder - supply, erection & commissioning of 5 c/s axial/mix flow water lubricated vertical flood pumps of 5 cs. discharge at 1440 rpm at static head of approx 6.0 mtr. having adjustable height, including ms bend including flange welding, ss/ht nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 (with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter) suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department., supply, erection & commissioning of fully automatic star delta starter of cap. 150 amp including all accessories as one incomer of mccb (150amp) with 1 no mcb for lighting load, contactor rating 120 amp, 90 amp, 70 amp with control transformer for control supply, outgoing indicator, having mpr & all types of protections i.e.uv/ov/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, seperate relay for single phase protection etc. complete in all respect suitable for open fields operation of 1 no. motor of capacity of 30 hp with a stand of ms channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type., supply, erection & commissioning of m.s delivery pipe 10" dia. made of ms plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & make. (including ss/ht nut & bolt, rubber packing & other fitment accessory required), supply, erection and commissioning of ms girder parallel flange section ismb 150 with primer and bituminous based paint inside & outside of length 4mtr (approx wt 60 kg per pc) as per approved make & conforming to is808:2021.

CTN :45693784

13 Jul, 2026 45.63 Lacs

Bhiwani - Haryana

Tender For supply erec comm of various electromechanical equipment like 3 no 5 cs vt pump electric motors starter panel and other allied material for flood protection works from the field area of village ghuskani outfall at rd8350 l of nigana feeder - supply, erection & commissioning of 5 c/s axial/mix flow water lubricated vertical flood pumps of 5 cs. discharge at 1440 rpm at static head of approx 6.0 mtr. having adjustable height, including ms bend including flange welding, ss/ht nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 (with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter) suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department., supply, erection & commissioning of fully automatic star delta starter of cap. 150 amp including all accessories as one incomer of mccb (150amp) with 1 no mcb for lighting load, contactor rating 120 amp, 90 amp, 70 amp with control transformer for control supply, outgoing indicator, having mpr & all types of protections i.e.uv/ov/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, seperate relay for single phase protection etc. complete in all respect suitable for open fields operation of 1 no. motor of capacity of 30 hp with a stand of ms channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type, supply, erection & commissioning of m.s delivery pipe 10" dia. made of ms plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & make. (including ss/ht nut & bolt, rubber packing & other fitment accessory required), supply, erection and commissioning of ms girder parallel flange section ismb 150 with primer and bituminous based paint inside & outside of length 4mtr (approx wt 60 kg per pc) as per approved make & conforming to is808:2021.

Central Government/Public Sector

CTN :45427502

23 Jun, 2026 NA

Raipur - Chhattisgarh

Tender For corrigendum : supply of spares for esab make rail wheel flange welding machine

CTN :45582487

27 Jun, 2026 NA

Hyderabad - Telangana

Tender For supply of borescope , battery tester with printer , glue gun , heavy duty socket set , desoldering wire

CTN :45544495

27 Jun, 2026 9.00 Lacs

Leh - Jammu And Kashmir

Tender For supply of 16 pics cushion crip screw driver set , 6 pcs b1 meterial prescsion screwdriver , dm830l digital multimeter , plastic 60 draws componets organisers , tool wall hanger , desoldering pump , soldering station bits , pbc holder for soldering , wire nipper , wire cutter with stripper , 4v 6.3mm li ton cordless scredriver , long allen key set 9pc t handle hex key , soldering iron station 60w unit 50w , smd hot air rework station 1000w , blak dacke hot air gun 2000 , 1200 x 2 inch lcd digital microscope , illuminated magnifier handhled , led magnifiing lamp with lanc , glue gun , rotating height adjustable brastoolst , extension board 10 amp output 250v 1 5m , brushes corless impact driver drill , double shelf ead work table with light

CTN :43051006

17 Jun, 2026 1.52 Lacs

Kalpakkam - Tamil Nadu

Tender For bid to ras corrigendum : supply of insulation tape , box spanner set sq. drive size 8mm to 24mm with ratchet extension rod , socket set and screwdriver bit torx rachet as per specification , double ended insulated 6-32 mm spanner set , electrical line tester , 1kv insulation tester as per specfication , non rechargeable 9v aa battery , allen key set size 1. 5,2,2. 5,3,4. 5,6,8,10mm , 3-8mm tap thread set , 300mm nylon cable tie , 400mm nylon cable tie , insulated wire stripper , insulated cutting plier , soldering gun with stand , solder wire , heat shrink sleeve 6mm , heat shrink sleeve 10mm , lintel free white banian cloth , contact cleaner as per specification , heat shrink sleeve 45mm , heat shrink sleeve 14mm , heat shrink sleeve 25mm , extension box with 5m cable as per specification , 2. 5mm2 pvc insulated flexible copper wire of 100 mtrs coil , 0. 75mm2 pvc insulated flexible copper wire of 100 mtrs coil , desoldering wick ) /bid number: gem/2025/b/6964616 * /dated: 04-12-2025 & & / bid document1 / 26

CTN :45446753

22 Jun, 2026 57.77 Lacs

Bhiwani - Haryana

Tender For supply erection commissioning of electrical and mechanical equipment for dewatering of flood water from field area for village badesra outfall at rd 70600 l of jui feeder - estimate for supply, erection & commissioning of electrical & mechanical equipment for dewatering of flood water from field area for village badesra outfall at rd 70600-l of jui feeder in lift w/s (m) division, bhiwani - supply, erection & commissioning of 5 c/s axial flow water lubricated vertical pumps of 5 cs. discharge at 1440 rpm at static head of approx 8.0 mtr. with y body, including ms bend including flange welding, nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department, supply, erection & commissioning of fully automatic star delta starter suitable for 30 hp motor as per ip 54 with all allied item like mccb, contactor, rating 120 amp 90 amp, 50 amp, all type of protection relays (over voltage, under voltage, over corrent, singhle phasing preventor, delay siwtch ) correction capacitor, digital meter, bus bar, thimble etc suitable and all live parts should be covered as per site demand and compartment coated with epoxy coating as per approved technical specification of department. (including cable suitable for panel to motor).

CTN :45446757

22 Jun, 2026 73.10 Lacs

Bhiwani - Haryana

Tender For estimate for supply, erection & commissioning of various electromechanical equipment like 5 no. 5 cs. vt pump, electric motors, starter panel and other allied material for flood protection works from the field area of village dang khurd & outfall at rd 65000-r of nigana feeder in lift w/s (m) division, bhiwani for the year 2026-27. - supply, erection & commissioning of 5 c/s axial/mix flow water lubricated vertical flood pumps of 5 cs. discharge at 1440 rpm at static head of approx 6.0 mtr. having adjustable height, including ms bend including flange welding, ss/ht nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 (with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter) suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department., supply, erection & commissioning of fully automatic star delta starter of cap. 150 amp including all accessories as one incomer of mccb (150amp) with 1 no mcb for lighting load, contactor rating 120 amp, 90 amp, 70 amp with control transformer for control supply, outgoing indicator, having mpr & all types of protections i.e.uv/ov/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, seperate relay for single phase protection etc. complete in all respect suitable for open fields operation of 1 no. motor of capacity of 30 hp with a stand of ms channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type., supply, erection & commissioning of m.s delivery pipe 10" dia. made of ms plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & make. (including ss/ht nut & bolt, rubber packing & other fitment accessory required), supply, erection and commissioning of ms girder parallel flange section ismb 150 with primer and bituminous based paint inside & outside of length 4mtr (approx wt 60 kg per pc) as per approved make & conforming to is808:2021.

Central Government/Public Sector

CTN :45137873

19 May, 2026 NA

Chandigarh - Chandigarh

Tender For providing of custom bid for services - 8 inch dia ms flange welding work at sub quarry 1 and 2 for monsoon of quarry 1 of agpeocm under gpsa of wcl ballarpur area

Flange Welding Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector