Latest flanges Tenders | Government flanges Tenders

CTN :45702962

03 Jul, 2026 4.18 Lacs

Siddipet - Telangana

Tender For supply and delivery of pvc pipes, rr couplings, ci d-joints, hdpe collars, saddles, ms flanges, sluice valves, and other required materials for attending water supply distribution pipeline leakages in wards no. 1 to 43 of siddipet municipality under general funds.

CTN :45277270

06 Jul, 2026 NA

Kadapa - Andhra Pradesh

Tender For corrigendum : procurement of sae flanges for hydraulic pipes for wagon tipplers and side arm chargers

Central Government/Public Sector

CTN :45407289

15 Jul, 2026 NA

Duliajan - Assam

Tender For corrigendum : supply of inductively coupled plasma - mass spectrometer (icp# ms) with accessories

CTN :45559939

04 Jul, 2026 22.40 Lacs

Sonipat - Haryana

Tender For corrigendum : supply of deflection of curved member apparatus , shear centre apparatus , portal frame apparatus , two hinged arch apparatus , cable geometry and statics apparatus , unsymmetrical bending apparatus , bending moment and shear force apparatus , maxwell reciprocal theorem apparatus , deflection of continuous beam apparatus , slope and deflection apparatus , behaviour of column and beams apparatus , elastic properties of deflection beam apparatus , two hinged arch apparatus , analysis of elastically coupled beam apparatus , pin joint truss apparatus , analysis of redundant joint apparatus , discharge over notches apparatus , pitot tube setup , impact of jet on vanes apparatus , digital handheld water velocity meters , tilting open bed flow channel flume , automatic traffic classification and counting counter , length gauge with isi certification mark is 2386 part i , speed gun speedster iii , gopro hero camera with tripod stand , thickness gauge with isi certification mark is 2386 part i , 75 mm sieve , 63 mm sieve , 50 mm sieve , 37 point 5 mm sieve , 25 mm sieve , 12 point 5 mm sieve , 9 point 5 mm sieve , 4 point 75 mm sieve , 2 point 36 mm sieve , gi pan and lid , 1 point 18 mm sieve , 600 micron sieve , 300 micron sieve , 150 micron sieve , 75 micron sieve , brass pan and lid , aggregate impact tester is 2386 part iv , crushing value apparatus is 2386 part iv , bitumen penetration kit is 1203 , flash point open and fire point cleveland is 1448 part 69 , ring and ball apparatus semi automatic is 1205 * /bid number : gem/2026/b/7615986 + /dated: 15-06-2026 ' ' / bid document 1 / 30

CTN :45270492

07 Jul, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of jetpac firepac fr bellows assembly 2 bore , bellows jet pac firepac with fire resistance builtin & fully , metallic bellow 125 mm with flanges , jetpac firepac fr bellows assembly 8 bore , spare kit comprising slems tips packing seal

CTN :45720736

07 Jul, 2026 50.00 Lacs

Bikaner - Rajasthan

Tender For ट्रेक्टर मय कपल्ड मड पम्प (30hp/50 hp कैपेसिटी) मय एक हेल्पर कम प्लम्बर एवं सहायक कर्मी उपलब्ध कराने का कार्य। - work of providing tractor coupled mud pump (30hp/50 hp capacity) along with one helper cum plumber and supporting personnel.

corporations/Associations/Others

CTN :45723624

02 Jul, 2026 6.00 Lacs

Salem - Tamil Nadu

Tender For supply delivery and fixing of motor and accessories at ward-1 selliyampalayam oht in narasingapuram municipality - supply and delivery of kirloskar make 15hp/11kw/2900rpm three phase/415v/50hz/ac/tefc horizontal centrifugal monoblock pump impeller-mechanical seal (head-20mtr,flow rate-2154lpm) size:100x100mm (local quotation) 15hp horizontal centrifugal monoblock pump, labour charges for erection of horizontal shaft, centrifugal pumpset (coupled/monoblock) in bore well/open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of tpic switches starter, voltmeter, ammeter, capacitor single phasing preventor and laying and jointing the cables and twinearthing as per ie rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by eb authorities., three phase panel board star- delta with two level guard and auto start supply and delivery of star-delta starter confirming to is 13947, iec60947-1 and as amended thereafter with suitable kw rating for operation in ac/ three phase/50hz (+/- 5%) and 415v (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., ct operated ammeter (65 mm dia) with suppressed scale,voltmeter (65mm dia),voltmeter selector switch,miniature circuit breaker, thermal overload relay, air break contactors suitable for next standard higher kw rating, single phasing preventor, dry running preventor and on/off push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capa citor is to be taken separately). three phase panel board for 15hp, supply,delivery and fixing of the following materials are listed below etc..,as directed by the departmental ofiicers.for service4 core 16sq.mm pvc copper ug cable, for motor3 core 6sq.mm pvc insulated and sheathed flat type copper cable, 150mm di pipe, 100mm gi pipe , 100mm gi flange set, rubber sheet for flange set, ms bolt and nut20mm dia and above x 90mm to120mm length fully threaded bolts andwith nuts 2 nos. , manhole cover 60 x 60cm (heavy duty) with frame, supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary ms flange of table e , gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the departmental officers. 150mm sluice valve, 100amps 4pole mcb, 100amps porcelain fuse unit (500v), 32mm pipe

CTN :45715657

15 Jul, 2026 17.38 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For tender for supply of erection and fabrication work b c c - juice/water scale ke weight channel bed mein se gale/kamzor channel ko kaatkar hatana. poorvanusar naya banakar lagana evam trial dena. , juice weighing scale ke filling tank ke rods ki kamzor/gali guides ko naya banakar lagana. , juice. maceration water evam final molasses ke weighing scale tank ke gale/kamzor bottom cone ko kaatkar purane anusar naya bottom cone lagana va poorn trial dena. , juice weighing system ke measured juice receiving tank ki gali/kamzor bottom evam side plates ko kaatkar hatana evam nirdeshanusar purani/nai plate lagakar leak.proof trial dena. , raw juice pump par lage catcher ko kaatkar hatana tatha naya catcher fabricate kar yathasthan lagakar samast connection poorv ki bhanti karna evam leak.proof trial dena. , pan. quad body evam vapour line juice heaters ki hydraulic testing ke liye inlet evam outlet ke vapour pipes mein cutting karke plate ke blind weld karna tatha hydraulic uparant blind kaatkar hatana evam vapour pipe ko punah andar va bahar se leak.proof weld karna. , semi kestner. vapour cell. quad body juice heater. vapour line juice heater ke condensate bottles tatha syrup receiving bottles ke cells ko kaatkar ceiling baffle plate ke kamzor hisse. bottom plate ke kamzor hisse athva cell ke kamzor hisse ko badalkar condensate bottles/syrup receiving bottles ki vanchhit marammat kar jal bharav parikshan dena. , juice heater mein lage ayatakaar juice entry box ko dismantle karna. gale/kamzor charon nipples badalna. double beat valves ki fitting hetu dono flanges lagana. box ki marammat kar box fit karna evam double beat valve fit karke leak.proof parikshan dena. , sabhi juice heaters ki gali hui sampoorn partition plate ko kaatkar bahar nikalna va nai 8/10 mm plate lagakar gili hui ring ko leak.proof welding karna tatha lagi hui tubes ko bachakar santoshjanak trial dena. , juice heaters mein dono taraf partition plate ki kamzor m.s. strip ko dismantle karna. kate face par grinding kar nai 25 mm x 5 mm ki m.s. strip banakar lagana evam rubber fit karna. , juice sulphiter ke recovery tower ke gale/kamzor bottom cone ko kaatkar 10/12 mm moti m.s. plate se sample anusar naya cone fabricate kar yathasthan fit kar leak.proof welding karna. , juice sulphiter ke base ke charon side ke gale/kamzor horizontal beams ki vanchhit strengthening hetu unke andar 12 mm moti plate lagakar majbooti pradan karna. , juice/syrup sulphiter ke kamzor bottom cones evam top cones ko dismantle kar sample anusar naya banakar fit karna. tatha andar va bahar se leak.proof welding kar santoshjanak jal bharav evam trial dena. , syrup sulphiter ke tower ki gali/kamzor baffle plates/jaliyon ko bahar nikalna. vanchhit marammat kar yathasthan fit kar leak.proof trial dena. , syrup pump se syrup sulphiter tak dono pumps ki delivery ki dono lines ko neeche utarkar garam karke. bhali bhanti safai karna. gali hui pipe line badalkar valve. bend. nipple ityadi lagakar punah lines ko fit karna evam leak.proof trial dena. , syrup/juice sulphiter ke upar lage recovery tower ko utarkar gali shell ko nirdeshanusar nai/purani plate se shell taiyar kar fit karna evam tower ko punah yathasthan lagakar leak.proof trial dena. , juice/syrup sulphiter/clarifier ke kamzor shell ke kamzor bhag ko kaatkar hatana. nirdeshanusar nai/purani 10/12 mm plate se banakar yathasthan lagakar andar va bahar se leak.proof welding kar trial dena. , sulphur bhatti (juice/syrup) ke gale/kamzor secondary gas cooler ko kaatkar hatana. 10/12 mm moti plate se purane ke anusar naya cooler fabricate kar yathasthan fit kar samast connection poorv ki bhanti kar leak.proof gas trial dena. , sulphur bhatti station par juice/syrup hetu sthapit sulphur bhattiyon ke gas coolers ke gale/kamzor cooling pipes ko kaatkar hatana. purane anusar naye pipes taiyar kar poorv ki bhanti fit kar leak.proof trial dena. , sulphur bhattiyon ke gale gas headers ko kaatkar hatana. purane anusar naye headers taiyar kar lagana. , sulphu

CTN :45717581

06 Jul, 2026 4.03 Lacs

Multi City - Telangana

Tender For supply and delivery of leakage materials etc in div.no.12,13,18,19,20,21,22,23 (amc 2026-2027) reserved for st societies / st individual under general funds - supplying and delivery of gi bolts and nuts with double washer conforming to is specification including cost and conveyance to site and taxes etc. complete, supplying and delivery of 6mm thick rubber packing conforming to is specification including cost and conveyance to site and taxes etc. complete, supply and delivery of rendroc plug quick setting cement, including cost of materials and all conveyance charges etc,. complete.(with latest manufacture date), supply and delivery of packing rope for arresting of leakages., supply and delivery of lead wool best quality including all transportation charges, all charges etc complete., supply and delivery of clamp set incliding cost all labour charges etc., complete. 150mm dia, 110mm dia, manufacture, supply and delivery of tee including all transportation charges, all charges etc complete. od 160mm, manufacture, supply and delivery of m.s flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to is:7322-1985 and flange dimensions conforming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site etc., complete. (150 mm diax 15 mm thick)

CTN :45724340

06 Jul, 2026 7.75 Lacs

Multi City - Telangana

Tender For procurement of leakage materials arresting of leakages and in division no.44, 45, 46,47,62,63 and 64 under annual maintenance for the year 2026-27 - 150 mm dia , 150 mm dia 15 mm thick , 160 mm dia , 200 mm dia , 200 mm dia 15 mm thick , 200 mm dia hdpe , 315 mm dia hdpe , 350 mm dia m.s , arresting of leakages at various locations in ward no. 44,45,46,47 &48 including earthwork excavation and arresting of leakages with required materials and red rock cement, portland cement, caulking, necessary apparatus leakage arresting and refilling of the excavated earth includind cost and conveyance of all tools materials and labour charges etc., complete. (a) 160 mm dia hdpe , cost of m.s flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to is:7322-1985 and flange dimensions conforming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site etc., complete. (a) 100 mm dia 15 mm thick , manufacture, supply and delivery of di d/f gate valves (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade ggg-40/ sg- 400/15 or ggg-50/sg-500/7 or equivalent grade as per i.s.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with epdm food grade quality and seals of nbr and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per bs5163-89/is14846-2000/din 3202 f 4. all the valves should be with electrostatic powder coating both inside and outside pocket less body passage. drilled as per requirement of the dept. (a) 100 mm dia , manufacture, supply, & delivery of hdpe fittings conforming to is 4984 - 1995 including transportation to anywhere in t.g. excluding taxes. pipe end long neck (a) 110 mm dia , manufacture, supply,& delivery of high density polyethylene pipes (pe-100 grade) for water supply conforming to is 4984-2016 including transportation to any where in t.g, but excluding gst and specials etc.,complete(supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 metres.) 8 kg (a) 110 mm dia hdpe , supply and delivery of 53 grade opc cement bags including all charges etc., complete as per the directions of the departmet officer in charge. , supply and delivery of frc cement supply 5 kg bag including all charges etc., as per the directions of the departmet officer in charge complete. , supply and delivery of nuts and bolts including all charges etc., complete.as directed by the deparment officer in charge. , supply and delivery of packing rope including all charges as per the directions of the departmet officer in charge. , supply and delivery of rubber sheet including all charges etc., as per the directions of the departmet officer in charge complete. , supply, fabrication and fixing in position of ms for windows and grills including cost and conveyance of all material and all labour chages for fabricating, fixing including cost of welding rods, power charges, xcluding cost of fixing in positio etc complete.

Flanges Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others