Latest flap actuator Tenders | Government flap actuator Tenders

Central Government/Public Sector

CTN :45335159

11 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of single stage lpg regulator with an adapter is required for oxy cutting, heating and brazing work. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45335161

11 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of regulator end flashback arrestors for fuel gas(dissolved acetylene gas & lpg), specification :- (i)max working pressur-1.5/3bar,(ii) inlet connection -3/8bsp rh f, (iii) outlet connection-3/8 bsprh m, (iv)safety element: fa/nv/pv/tv,(v)mounting: regulator end.(vi) pop-up reset button.make- esab/gce/victor gas/miller weld only. [ warranty period: 30 months after the date of delivery ] ]

CTN :45318064

10 Jun, 2026 NA

Bagpat - Uttar Pradesh

Tender For tender for supply of hardware items -blue paste tube , 15 ml camel make , holdtite , 500gram , grinding wheel ag-4 bosch make , buffing wheel ag-4 bosch make , cutting wheel ag-4 bosch make , angle grinder ag-4 bosch or dewalt make , pather tod tungsten carbide tip , carbon brush for ag-4 grinder , carbon brush for ag-7 grinder , pipe wrench 18 inch , taparia make , pipe wrench 24 inch , taparia make , sly wrench 24 inch , taparia make , hammering spanner size 36 mm , taparia make , chain block capacity 5ton indef make , welding holder , current 600amp , esab make , welding copper lead 35 sqmm , cutting torch , welding safety hand gloves , welding white glass , welding black glass , safety goggles (transparent) , oxygen regulator , lpg regulator , gas cutting nozzle 1/8 inch , gas cutting nozzle 1/16 inch , gas cutting nozzle 1/32 inch , white lead , red lead , emerey paper rough , emerey paper fine , emerey tape fine , graphite powder , hand wire brush 6 inch size , grinding wheel 5 inch bosch make , grinding wheel 7 inch bosch make , cutting wheel 7 inch bosch make , m-seal compound , teflon tape , oxygen rubber hose pipe , red , lpg rubber hose pipe , blue , woolen felt size 1500x4000x16mm (namda) , painting brush 4inch , hose pilpe clamp 1.25inch , rubber star l-75 , lovejoy make , rubber star l-90 , lovejoy make , rubber star l-95 , lovejoy make , rubber star l-100 , lovejoy make , wire braided rubber hose pipe 1inch , pressure- 800psi , temp.-80 to 120 degree c heavy duty , flexible wire braided hose pipe 3/4 inch , (tansperant) pressure- 5kg per sqcm , heavy duty , ms bolt 12x45 mm , full thraed , nylock nut m-12 , split pin m-6x50 mm , split pin m-6x65 mm , metalon pad as per drawing or semple , ms bolt 20x120 mm , halfthraed , nylock nut m-20 , oil seal mykoda/skf no-20-30-10 , oil seal mykoda/skf no-24-42-8 , oil seal mykoda/skf no-30-47-7 , oil seal mykoda/skf no-45-70-8 , oil seal mykoda/skf no-50-70-10 , oil seal mykoda/skf no-50-80-8 , oil seal mykoda/skf no-55-80-8/10 , oil seal mykoda/skf no-60-85-10 , oil seal mykoda/skf no-68-100-10 , oil seal mykoda/skf no-78-100-10 , oil seal mykoda/skf no-65-90-10 , oil seal mykoda/skf no-70-90-10 , oil seal mykoda/skf no-80-100-10 , oil seal mykoda/skf no-75-95-10 , oil seal mykoda/skf no-100-120-13 , oil seal mykoda/skf no-85-100-10 , oil seal mykoda/skf no-85-110-12 , oil seal mykoda/skf no-20-30-10 , oil seal mykoda/skf no-95-120-13 , oil seal mykoda/skf no-100-120-10 , oil seal mykoda/skf no-110-130-13 , oil seal mykoda/skf no-130-160-12/15 , oil seal mykoda/skf no--300-330-15 , hydraulic rubber hose pipe both side flange type -en853/sae100/r1 at , size-3/4inch , length-3 mtr. , max. w.p.-105 bar , 1520 psi make mithra fluidtrans , hydraulic rubber hose pipe both side flange type-1 sn dn16 din 20022 , en853 , sae100 , r1 at , size-5/8inch , length-3 mtr. , max. w.p.-130 bar/1900 psi make polyhose , hydraulic rubber hose pipe both side flange type -sae100 r4-16 , i.d.-1inch , length-1.5 mtr. , max. w.p.-17.2 bar/250 psi make parker markwel , hydraulic rubber hose pipe both side flange type -sae100 r4-32 , i.d.-2inch , length-1.5 mtr. , max. w.p.-10 bar/145 psi make parker markwe , hydraulic rubber hose both side flange type -5 sae100 r4-20 , i.d.-1 1/4inch , length-2.6 mtr. , max. w.p.-13.8 bar/200 psi make parker markwel , hydraulic rubber hose both side flange type -6 sae100 r4-32 , i.d.-2inch , length-2.6 mtr. , max , w.p.-10 bar/145 psi make parker markwel , socket set 1/4 inch drive , 46 pcs set (taparia sa46) , plier 8inch (taparia 1621-8) , pipe wrinch 8inch , pipe wrinch 12inch , slide wrinch 6inch , slide wrinch 10inch , slide wrinch 12inch , ring spanner set mm (6 , 7 to 30 , 32) , d-spanner set mm (6 , 7 to 30 , 32) , wire stripper set , allen key set inch , allen key set mm , nose circlip piler inner , nose circlip piler outer , hexa fram with blade model-hfsa12 size 12inch , screw driver kit (model 802) , long handle screw driver size (300mmx8mm) , cable t

CTN :45244477

25 May, 2026 NA

Pondicherry - Pondicherry

Tender For providing and fixing of kitchen chimney gas poipeline connection and kitchen equipments for the canteen building inside the ptu campus under rusa fund - ss dosa plate:supply and fabrication of 4 ft 2.5 ft commercial dosa plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves,complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use. , ss chapati plate:supply and fabrication of 4 ft 2.5 ft commercial chapati plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves, complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use., chimney with ducting & blower:supply, fabrication, and installation of 10 feet long commercial kitchen chimney (exhaust hood) made of ss 304 grade (1.0 1.2 mm thickness), rectangular type with ss baffle filters and oil collection tray, connected with 150 sq.ft gi ducting (0.6 0.8 mm thickness), complete with 2 hp heavy-duty centrifugal exhaust blower (3-phase, 1440 rpm), mounted on ms angle support structure, including all necessary fittings, clamps, bends, hangers, and electrical connections, suitable for continuous commercial kitchen operation, bain marie (7 compartment):supply and installation of 7-compartment commercial bain marie unit, fabricated in ss 304 grade (1.0 1.2 mm thickness), complete with 7 nos. gn pans with lids, fitted with 3 kw electric heating element (230v, single phase), thermostatcontrolled water bath heating system, and sturdy ss/ms support structure with adjustable legs, including water tank and drain arrangement, suitable for continuous commercial kitchen and buffet operations., working table with 1 under shelf:supply and fabrication of 4 ft 2 ft working table (vegetable cutter table) made of ss 304 grade (1.0 1.2 mm thickness), complete with one under shelf (u/s), heavy-duty ss square pipe frame, reinforced top with machine mounting provision, and adjustable legs, suitable for vegetable cutting and food preparation in commercial kitchens, gas rice steamer (20 kg):supply and installation of 20 kg capacity gas rice steamer, fabricated in ss 304 grade (1.0 1.2 mm thickness), double-wall insulated type, complete with heavy-duty perforated rice vessel, high-efficiency lpg gas burner, pressure control system, steam outlet, and sturdy ms/ss stand, suitable for continuous commercial kitchen operation., ss rack (4 tier): supply and fabrication of 4-tier stainless steel rack of size 35" 14" 48", made of ss 304 grade (1.0 1.2 mm thickness), complete with four shelves, heavy-duty ss square pipe frame, adjustable legs, and smooth polished finish, suitable for storage of utensils, provisions, and kitchen materials in commercial kitchens., copper gas pipeline:supply, installation, testing, and commissioning of copper gas pipeline system suitable for commercial kitchen, using 3/4 inch main line and 1/2 inch branch lines, complete with all necessary fittings, isolation valves for each equipment, pressure regulator, nrv, and flexible hose connections, properly supported and leak-tested, suitable for lpg gas supply to dosa plate, chapatti plate, rice steamer and gas stove units.

State Government

CTN :45161104

04 Jun, 2026 4.50 Lacs

Hoshangabad - Madhya Pradesh

Tender For supply of electrical and lpg gas plant materials - led bulb 18 watt , led bulb 80 watts, , led bulb 65 watts, , bulb holder, , copper wire 1.5 mm, , copper wire 2.5 mm, , copper wire 4mm, , copper wire 5mm, , multi wire, , feggival wire bundle, , electrical fitting pipe (pvc 0.5"), , electrical fitting pipe (pvc 1"), , electrical fitting pipe (pvc 1.5"), , switch, , power plug, , power pin, , tape roll, , led tube light complete, , inverter bulb 10 watts, , inverter bulb 20 watts, , ceiling fan, , ceiling fan regulator, , ceiling fan condenser, , wall fan medium size, , exhaust fan 09 inch, , exhaust fan 12 inch, , fan winding, , watch cell, , pliers, , tester, , 7 hp motor winding, , needle valve half inch 3/8", , furnace burner t-78, , chapati burner (r-v-3), , copper hose 01 ft, , copper hose 01-1/2 ft, , rubber hose, , regulator, , bering greece, , mill lease, , millstones

CTN :44769785

01 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For corrigendum : servicing of oxygen and lpg gas regulator and cutting torch

CTN :45280301

05 Jun, 2026 NA

Baghpat - Uttar Pradesh

Tender For supply of aluminum rivits , welding glass , black rubber sheet , black tools square rod , blue tube , boiler gauge glass , boiler gauge glass tube , brass shim , break liner , flux , tips , csk bolt , cutter nozzle , dog pin , en8 round , filter cloth , flet belt , g.m nut , gas cutter , gear coupling , h.s.s tool bit , handle , blade , hose pipe , clamp , chain block , jaws , l.p.g. gas regulator

Central Government/Public Sector

CTN :45254708

05 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of flash back arrestor (dry type) for regulator end of acetylene/lpg lines to prevent flash backs in oxy fuel system conforming to en 730/iso 5175-1/is 11006/2011, (ra-2021),amd-1 of dec.2013 standards with flame arrestor (fa) and non return valve (nrv) and thermal cut off valve (tv) working pressure: 1.5 bar for acetylene/5.0 bar for lpg. end connections g 3/8" lh to en 560/iso 3253 standards. make: messer (dgn fuel) or esab (protex ra) or gce (fr-34 r fuel) or weldstar or witt only. note:1) offers of oems or their authorised dealers enclosing valid authorised dealershipcertificate only will be considered. 2) the suppliers shall send test certificate from govt. authorised test house. in case of international brand, the test certificate from reputed institute like bam, germany is mandatory. 3) the suppliers should have equipments for testing of flash back arrestors and calibration. the purchaser has the right to inspectthese installations. as per specn. en 730/iso 5175-1/is 11006/2011,(ra-2021), amd-1 of dec 2013. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45255479

03 Jun, 2026 NA

Ludhiana - Punjab

Tender For design, supply and installation of various items related to lpg gas pipeline,bhatti point, 4 bank manifold, oil meter gauge, ball valve used master, psi regulator high pressure, psi regulator low pressure, gas detector with installation make victory or similar, isi marked pipe, fitting (elbow, t & socket),4 feet pipe in 1*1/2 feet, steel cage for cylinders with fiber roof, painting charge for rust protection, freight, labour & fitting charge etc. for running room ldh. [ warranty period: 30 months after the date of delivery ]]

Central Government/Public Sector

CTN :45077838

25 May, 2026 NA

Mysore - Karnataka

Tender For supply of click on adopter (lpg regulator) heavy duty dia. 25mm with 3/8 bsp outlet industrial type make: hittcon / weld star / weld gura / surya / neo [ warranty period: 12 months after the date ofdelivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Flap Actuator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector